Database Users

[Q] Huawei Ideos S7 Hard Reset????

How to hard reset Huawei tablet S7 when turn on it ask for about email nad password
any recovery or flashing method to remove this /////

I tried to upload the file you need, but it wont let me, pm me I will send it to you I had the same problem I will send you the file and instructions on how to get it done

Hi Sapperpipo, can you send me the hard reset procedure too? Pls PM me thanks!

Not sure if this will help:
http://wiki.modaco.com/index.php/Huawei_Firmware_S7
http://www.taskjohann.com/2011/11/factory-reset-for-huawei-s7-tablet.html

I have tried to use the quoted 2nd link, downloaded the dload file and used it. somehow on the middle of the installation process it stops and all the button lights start to blink faster than their initial frequency when the progress bar is going. i don't know what the fix is for this. i have a feeling that this can help me get back my lost 8gb internal SD if i would have been able to flash it successfully on my ideos7.
has anybody tried this already, would be happy to know.

Blinkers
Do not use battery. Use only power connector. First press back and power on and after a few sec leave power button. You should see a white bar. Leave Back button and disconnect charger. Keep stock firmware in external sdcard formatted to FAT32 under dload and make sure you have only unlmt.cfg and along with UPDATA.APP and upg.
Reconnect charger and press power on. If the flashing does not start try again. Fast blinking happened to me, say after 5 bars or may be 6. After rooting device I tried some mod and ended up in a mess. Had to start all over again. But it started and went thru properly after two tries.

After trying this a few times, My S7 keeps rebooting. not stable, need to find another Rom..
---------- Post added at 05:34 PM ---------- Previous post was at 05:15 PM ----------
Link to new berlarus rom S7 slim.
Gonna flash and see now.
http://www.mediafire.com/?r98ck9f0l2d46x2

Nish4 said:
After trying this a few times, My S7 keeps rebooting. not stable, need to find another Rom..
---------- Post added at 05:34 PM ---------- Previous post was at 05:15 PM ----------
Link to new berlarus rom S7 slim.
Gonna flash and see now.
http://www.mediafire.com/?r98ck9f0l2d46x2
Click to expand...
Click to collapse
So have u try dis,stable or what ?? result ??

LGG2 bricked on fastboot mode.

Hello I tried to flash dorimanx 11.2 kernel onto lgg2 with cloudy g2 2.2. It is the T-mobile LGG2 so D801.
I tried to flash using twrp. it said flash was successful. The screen came up with
[900] Fastboot mode started.
when I plug the phone into my computer it says
--reset--
--postchaerge--
When I go to devices on my computer it has under unspecified "Android" and it says there are no drivers installed for it, though lg g2 drivers are on my computer and I've been using them lately.
My phone does not stay off. It automatically boots to LG logo then to fastboot mode
If I hold down power and volume. It goes to LG screen and stays there for 5-10 seconds then the screen goes blank and the red LED indicator starts flashing. It seems to keep doing this until I release the power and volume down and then it goes to LG to fast boot.
If I reboot the phone by holding power+vol down and when the LG logo appears release both and then press them again it goes to factory data reset screen.
Thanks for any help, KipKipK

Okay, I waited overnight and no replies. Has no one seen this before. Is this phone dead. I will be sitting at my computer for the next few hours if someone would help walk me through something
*** update
tried to get into download mode this morning. power + vol up plugged into PC
IT WORKED! However it only had the download screen up for a few seconds when it changed to firmware update.
Going from the top of the screen down it says.
1 firmware update.
2 then has a connection symbol with rotating circles around it
3 it says DO not unplug the USB connection until the process is complete.
4 Then a progress bar at 0% that isn't moving
5 Lastly it has a panel that says USER B100 and a few lines down ROOTED
Under devices it is now detected as LG AndroidNet Phone
Under device manager it says under ports. LGE AndroidNet USB Serial Port (COM14)

you Are OK my friend don't worry ... now you should flash the original firmware for your phone ... read here carfully and you should be just fine
http://forum.xda-developers.com/showthread.php?t=2432476&highlight=can+i+use+kdz+files
there is 2 ways to flash the firmware
the best way is the tot file way its faster and always work fine
Good luck . don't worry
---------- Post added at 01:08 PM ---------- Previous post was at 01:02 PM ----------
your download mode is fine don't misss there just power of your phone and charge it
read the post carfully
download all what you need and last step connect the cable and go to download screen to flash
if the process didn't start at the bigenning remove the usb cable and insert it again while in download mode and after you click the flash button.
---------- Post added at 01:13 PM ---------- Previous post was at 01:08 PM ----------
http://forum.xda-developers.com/showthread.php?t=2797190
https://www.youtube.com/watch?v=4X_ovKnu-FA
https://www.youtube.com/watch?v=hVLd-HlqveE
https://www.youtube.com/watch?v=wJtcPNklrfw
---------- Post added at 01:16 PM ---------- Previous post was at 01:13 PM ----------
you can also try to go to TWRP again first (before flashing original firmware)
http://forum.xda-developers.com/showthread.php?t=2534981

Awesome. I'll follow that guide + what you said to do and inform you how it goes.
*** THANK YOU! phone is revived. Time to start the process over again and figure out where I went wrong.

I have no idea how this happened since i just did this yesterday and it worked perfectly but i'm in a boot loop now.
1. I got stock
2. updated to 5.0.2
3. rooted
4. installed auto rec
5. rebooted
6 flashed twrp .
7 restarted. and now i'm in a boot loop.
The only thing the phone does is repeatedly go to lg logo. No LED light on.
I can get to factory reset screen.
It doesn't seem like I can get to download mode. I am trying by holding power button until phone goes and stays black. Then I press up vol button and plug into usb, but it just goes to LG boot loop again.
***Okay. NOW I ****ED UP. turned the phone off again to try and get it into download mode. Now the screen is black and it won't even go to LG screen.
So, It looks like I probably want to try and do the factory reset, which will get me to twrp, if I can get back to the factory reset screen but now the phone is just stuck off. (no blacklight on)
***Because the phone wouldn't turn on I decided to try to remove the battery. Somewhere in the process of removing the back cover the phone decided to start the boot loop again.
- I used this to get to factory reset, which got me to twrp.
- What do I do now? I found some posts that sound similar to what I want but really don't want to mess anything up so i'm just going to wait for a reply
- long term goal is to get cloudy g2 2.2 and dorimanx.

Since I didn't get a reply I just kind of said eff it and flashed the cloud g2 2.2 rom and the KK baseband. Device is now functioning. Time to decide if it is worth getting the kernel

what is the situation now is your phone go to twrp or not what is the situation here .
---------- Post added at 09:26 AM ---------- Previous post was at 09:23 AM ----------
if your phone can go to download mode just flash the original firmware . and tell me what kind of original firmware is it KITKAT or JELLYBEAN and don't upgrade to 5 LP
---------- Post added at 09:34 AM ---------- Previous post was at 09:26 AM ----------
and don't do anything
just you can download your phone twrp model exact model from here
http://www.gregtwallace.com/lgg2-projects/twrp/?version=2.8.7.3
and don't use twrp 3 aor up
we just need TWRP 2.8.7.3 this the best one till now ... i am using it

boot loop after lineage os installation

hello everyone,
I just installed the lineage os, but it gets stuck at the boot animation, can you help me accessing the recovery? It doesn't let me do it by presing the volume down and power button like I used to do.
Please help me, I can't use the phone and it is the only one I've got
thank you

xolotl_18 said:
hello everyone,
I just installed the lineage os, but it gets stuck at the boot animation, can you help me accessing the recovery? It doesn't let me do it by presing the volume down and power button like I used to do.
Please help me, I can't use the phone and it is the only one I've got
thank you
Click to expand...
Click to collapse
Go through the link below, if you can't find what you need ask again on the link below, and add detail for what version of stock firmware you were on, lollipop is preferred, what version of TWRP you are on, the latest is 3.1.0-0, and if you took the lineage OTA update, OTA is currently causing bootloops to TWRP (read posts before and after post 777.
Don't do anything to partitions from the terminal without backing the partition up first.
There is also a lot of info in the thread, use the thread search function.
For LG D802
https://forum.xda-developers.com/lg...rom-lineageos-14-1-unofficial-t3535119/page80
If you need to return to stock look at Post 574 it has links on how to return to stock and also all the software you need
---------- Post added at 01:03 PM ---------- Previous post was at 12:54 PM ----------
xolotl_18 said:
hello everyone,
I just installed the lineage os, but it gets stuck at the boot animation, can you help me accessing the recovery? It doesn't let me do it by presing the volume down and power button like I used to do.
Please help me, I can't use the phone and it is the only one I've got
thank you
Click to expand...
Click to collapse
Also in some ROMs the key combination for booting into recovery changed to vol up + vol down search the thread I put in post 2 as its been discussed there

I need help to fix my hard bricked Lenovo YT3-X50F

Hi everybody, I'm Tom and recently I wanted to flash a stock rom on my Lenovo Yoga Tab 3 YT3-X50F but I accidently flashed a YT3-850F instead of YT3-X50F and it completely messed up my tablet the screen is black but when I hold Power + Vol up it vibrates and restarts like it would normally, also the PC detects the tablet when i plug it in. But yeah as I said the screen is completely black and I don't know what to do I don't even know if I can boot into recovery mode when it's like this.... I really hope you guys can help me because I got this tab for my birthday and I don't want my parents to think I can't take care of my stuff.

Install fastboot drivers on your pc.
Start tablet in fastboot mode. Probably power on while holding volume up.
Download stock rom for your device.
On pc open cmd in folder where you have stock rom files issue these commands
Fastboot flash cache (cache.img)
Fastboot erase splash
Fastboot flash splash (splash.img)
Fastboot flash system (system.img)
Fastboot flash recovery (recovery.img)
Fastboot flash userdata (userdata.img)
Fastboot flash boot (boot.img)
Sent from my Nexus 6P using Tapatalk
---------- Post added at 06:51 PM ---------- Previous post was at 06:43 PM ----------
This of course will only work if your tablet is still functioning in fastboot mode. The fact it is recognized by the pc is a good start.
Sent from my Nexus 6P using Tapatalk
---------- Post added at 06:55 PM ---------- Previous post was at 06:51 PM ----------
Infact this might not work unless you tablet has unlocked bootloader.
Sent from my Nexus 6P using Tapatalk
---------- Post added at 07:07 PM ---------- Previous post was at 06:55 PM ----------
Or look here
http://forum.gsmhosting.com/vbb/f958/how-flash-yt3-x50f-yoga-tab3-2127594/
Sent from my Nexus 6P using Tapatalk

l
Tom B. said:
Hi everybody, I'm Tom and recently I wanted to flash a stock rom on my Lenovo Yoga Tab 3 YT3-X50F but I accidently flashed a YT3-850F instead of YT3-X50F and it completely messed up my tablet the screen is black but when I hold Power + Vol up it vibrates and restarts like it would normally, also the PC detects the tablet when i plug it in. But yeah as I said the screen is completely black and I don't know what to do I don't even know if I can boot into recovery mode when it's like this.... I really hope you guys can help me because I got this tab for my birthday and I don't want my parents to think I can't take care of my stuff.
Click to expand...
Click to collapse
Try flashing the (correct) stock rom using sideloader , it worked for me
Here, this might help you
https://www.google.com/url?sa=t&sou...FjAEegQIDhAZ&usg=AOvVaw0MpWQ5J8E3oQGZfl-GLGKL

My phone doesnt turn on anymore

Hello,
Sorry I came here with such noob things but I really dont have idea of what Ive done, I rooted my Moto G4 plus and all went good, but then I noticed that I wasnt able to download certain apps because of the root so I wanted to unroot my device and I ended up in twrp recovery wiping my system and had no clue of what I did until I noticed I had no OS. So then I started looking how the hell I was going to get back my OS, and when I was in the twrp UI, I pressed the power button+volume key because I wanted to get back to the recovery screen and the device turned off.
Now the phone doesnt even turn on and the white Led light blinks when I plug it in to the charger but thats the only thing the phone does now. I tried the 2+ minutes power+volume pressing with no success, could you guys please help me?

I was going to suggest the two minute volume down and power button thing but I just noticed you tried it already.
---------- Post added at 07:44 PM ---------- Previous post was at 07:41 PM ----------
Did you hold the volume down button and then press and hold the power button, in that order, for two minutes?

You have hard bricked your device. In TWRP, you can wipe the entire system and the internal storage. I have done it and then I connected my device to the computer. Because of adb drivers, I was able to push/copy the zip file of ROM into the device and then just flashed the ROM and it worked.
Connect the device to the computer and it should hopefully recognize as "qhsusb_bulk" or "qualcommloader" or something like that in the device manager's port options (I am referring to Windows).
Similar thing happened to my device and the LED light would glow when connected to charger. My phone was recognized as qhsusb_bulk by the computer and I followed this tutorial: https://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-hardbrick-solved-guide-t3657761
There is a youtube video too for the following tutorial in which the creator purposely bricks his device and then brings it back to life. Here is the link to his video: https://www.youtube.com/watch?v=m2NqpY6X-X4
However, your case is different than what happened to me so it may or may not work. Anyways you can give it a shot and I would recommend watching the video first as it will give you a brief idea.
Here is what I understood how the process works (I might be wrong). While flashing image on MediaTek devices through the computer, we switch off the device, connect it to the computer and then flash image without loading the bootloader. Here, we are doing a similar sort of thing and flashing some other bootloader to our device while it's switched off. Then we boot into the new bootloader and then flash the bootloader of our device. Once you have access to the bootloader, then you can pretty much do anything.
Good luck!