EE UK VoLTE on unbranded firmware - Samsung Galaxy S7 Edge Questions and Answers

Hi. I flash my s7 edge duos with UK btu firmware. All working perfect. I am in EE network. Is there any way to enable VoLTE on that firmware? Or maybe only one way to do it is flash EE branded firmware?

troxter said:
Hi. I flash my s7 edge duos with UK btu firmware. All working perfect. I am in EE network. Is there any way to enable VoLTE on that firmware? Or maybe only one way to do it is flash EE branded firmware?
Click to expand...
Click to collapse
Three uses volte and BTU works fine. I'm having no issues with volte.

The BTU firmware does not have VOLTE you would need to have the EE CSC (EVR ) on your device to gain this.

daveparki said:
The BTU firmware does not have VOLTE you would need to have the EE CSC (EVR ) on your device to gain this.
Click to expand...
Click to collapse
I'm on BTU with three UK and volte works fine for me.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

daveparki said:
The BTU firmware does not have VOLTE you would need to have the EE CSC (EVR ) on your device to gain this.
Click to expand...
Click to collapse
Is it possible to flash EE CSC only or I need to flash whole EE rom?

Yes it works ok as I've done it on my dual sim variant

ASHLEY117 said:
I'm on BTU with three UK and volte works fine for me.
View attachment 4137296
Click to expand...
Click to collapse
EE and Three are different. As stated before, EE requires EE CSC to be flashed to the ROM for VoLTE to work.
---------- Post added at 01:13 PM ---------- Previous post was at 01:12 PM ----------
troxter said:
Is it possible to flash EE CSC only or I need to flash whole EE rom?
Click to expand...
Click to collapse
CSC is enough. Back up your data. Phone will be wiped.

Galactus said:
EE and Three are different. As stated before, EE requires EE CSC to be flashed to the ROM for VoLTE to work.
---------- Post added at 01:13 PM ---------- Previous post was at 01:12 PM ----------
CSC is enough. Back up your data. Phone will be wiped.
Click to expand...
Click to collapse
Should I flash
CSC_EVR_G935FEVR1DQC1_CL10422490_QB12843457_REV00_user_low_ship.tar
Click to expand...
Click to collapse
or
HOME_CSC_EVR_G935FEVR1DQC1_CL10422490_QB12843457_REV00_user_low_ship.tar
Click to expand...
Click to collapse
?

troxter said:
Should I flash
or
?
Click to expand...
Click to collapse
Let me explain.
HOME_CSC is if you "DO NOT" want to wipe data (such as flashing a rom without wiping data). This method will keep data but will not change CSC.
You want to use the one that does not have HOME_CSC in it. So pick the first one.
Also, make sure you are flashing all 4 files in ODIN.
BTU BL
BTU AP
BTU CP
EE CSC

ASHLEY117 said:
I'm on BTU with three UK and volte works fine for me.
View attachment 4137296
Click to expand...
Click to collapse
Just seen this thread, did you get your phone from 3 or did you buy unbranded? im asking because im on 3 network but bought my phone separately and no way can i get it to use volte. Only way ive been told is to flash 3 firmware
TIA

Corduroysack said:
Just seen this thread, did you get your phone from 3 or did you buy unbranded? im asking because im on 3 network but bought my phone separately and no way can i get it to use volte. Only way ive been told is to flash 3 firmware
TIA
Click to expand...
Click to collapse
It's spotty and works when it wants to on BTU so I ended up flashing 3 csc. I bought it SIM free.

ASHLEY117 said:
It's spotty and works when it wants to on BTU so I ended up flashing 3 csc. I bought it SIM free.
Click to expand...
Click to collapse
Just in the process off dlding latest 3 firms, so you just flashed the csc nothing more?

Corduroysack said:
Just in the process off dlding latest 3 firms, so you just flashed the csc nothing more?
Click to expand...
Click to collapse
Yeah I flashed csc using csc selection zip on this forum and it works now. Three UK had no idea what I was asking ???

ASHLEY117 said:
Yeah I flashed csc using csc selection zip on this forum and it works now. Three UK had no idea what I was asking
Click to expand...
Click to collapse
lol i got the same response when i asked lol cheers mate i'll be doing that when i have time

sorry guys, quick question. im totally stupid with this firmware buisness, watched like 50 youtube videos and search alot of stuff but i dont get it.
basically i bought my s7 in the UAE (SM-G930FD) dual sim and want to change the firmware to UK SM-G930F cos i cant use samsung pay with my british card/account.
looking ito the firmware downloads on sammobile, theres loads of different versions like ee or 3g etc. my phone is unlocked and i want it to stay that way so which do i choose? do i have to choose the firmware of the network i want to use?
thanks

Related

SM-N920C Full official Firmware

Galaxy Note 5 N920CXXU1AOH2
Hello Guys This is the Complete firmware for SM-N920C ,includes AP, CP ,BL and CSC. I hope this might be helpfull to start the development .
Update:- Firmware uploaded
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DOWNLOAD : https://mega.nz/#F!BANCVDQZ!msbQM_SGXwxT-5LcrrUzvA
vysakhvineetha said:
Mod Edit: Long quote of the OP removed.
Click to expand...
Click to collapse
Thanks thats awesome, Waiting for Chainfire's Root
I hope this is a good start to a great thing lol
for which variant?
Lmax579 said:
for which variant?
Click to expand...
Click to collapse
SM-N920C
vysakhvineetha said:
Galaxy Note 5 N920CXXU1AOH2
Hello Guys This is the Complete firmware for SM-N920C ,includes AP, CP ,BL and CSC. I hope this might be helpfull to start the development .
Update:- Firmware uploaded
DOWNLOAD : https://mega.nz/#F!BANCVDQZ!msbQM_SGXwxT-5LcrrUzvA
Click to expand...
Click to collapse
I'm looking for SM-N920C Full official Firmware with CSC XXV or XEV
May you help me?
Thank for advance!
I found Galaxy Note 5 SM-N920C stock firmware for all region and carriers from
SM- N920C Stock Firmware
Hello,
if i buy this version, the native language is english, right? Can i change to portuguese?
Thank you
Will it work with dual sim SM-N920C ?
Jmakhdoom said:
Will it work with dual sim SM-N920C ?
Click to expand...
Click to collapse
same question.....
can I use it to the N920CD in order to get the LTE band 20?
I would like to buy the Note 5 dual sim but in some European Country like Italy , Vodafone using the Band 20 which is missing in the N9208 and N920CD ,
so in this case if it is possible to use the N920C firmaware in order to get the Band 20 in the N920CD it is a Great news....
do you know if any one already did it ?
thanks and have a nice weekend
THANKS! @samsumo
Hello
Excuse my bad english it's the reason of my question...
I bought one Note 5 in the USA and I look for the way to install French. Is it possible with which ROM : N920IDVU2AOJ3?
Palmiped
Palmiped said:
Hello
Excuse my bad english it's the reason of my question...
I bought one Note 5 in the USA and I look for the way to install French. Is it possible with which ROM : N920IDVU2AOJ3?
Palmiped
Click to expand...
Click to collapse
if your model is 920I then you can flash this firmware.
mtayabkk said:
if your model is 920I then you can flash this firmware.
Click to expand...
Click to collapse
Thank you for the answer. Sorry if my question is stupid, I am competent not at all in this domain.
Thus I can flash my Note 5 ( N920IDVU2AOJ3) with the version given here ( N920CXXU1AOH2) in order to get French?
In my searches I also found others ROM (on "ndroidzone") around N920IDVU1AO and many different letters at the end.
Is their compatibility with my phone better and how to know if those there contain French?
Thank you
Do not flash an N920C firmware to an N920I phone.
Robi-K said:
Do not flash an N920C firmware to an N920I phone.
Click to expand...
Click to collapse
Why?
Sent from my SM-N920I using XDA Free mobile app
Cause you will brick it.
Robi-K said:
Cause you will brick it.
Click to expand...
Click to collapse
How can that be when they are the same phone just different region.
They have exact same hardware inside .
Do you know a technical reason why same phones can not use MM
The modem/baseband part is different in these two phones. I am 99% sure if you flash either phone with the others firmware you will end up with a softbricked phone.
Baseband and modem only affect the ability to use network so if your country doesn't have that frequency then yes phone won't work..won't soft brick but won't get any signal either..
They are identical phones expect they are made for different regions...
Mine is optus AU the c model could be anything from Afghanistan to Vietnam. ..
Sent from my SM-N920I using XDA Free mobile app

//SM-G950U\\ *T-Mobile G950USQU1AQD9*

Make sure you enable OEM Unlock before flashing!! you can use this to return back to stock!!
AP_G950USQU1AQD9_CL11131491_QB13157259_REV00_user_low_ship_MULTI_CERT_meta.tar.md5
BL_G950USQU1AQD9_CL11131491_QB13157259_REV00_user_low_ship_MULTI_CERT.tar.md5
CP_G950USQU1AQD9_CP6187179_CL11131491_QB13157259_REV00_user_low_ship_MULTI_CERT.tar.md5
CSC_OYN_G950UOYN1AQD9_CL11131491_QB13157259_REV00_user_low_ship_MULTI_CERT.tar.md5
HOME_CSC_OYN_G950UOYN1AQD9_CL11131491_QB13157259_REV00_user_low_ship_MULTI_CERT.tar.md5
USERDATA_TMB_G950USQU1AQD9_CL11131491_QB13157259_REV00_user_low_ship_MULTI_CERT.tar.md5
https://www.androidfilehost.com/?fid=745425885120726190
Note
This is for Tmobile variant I don't have the device you can try and flash to other Qualcomm model at your own risk!!
Thanks for it... But there is no oem unlocking menu in developer option..
How should we proceed with it..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-G955U using Tapatalk
can a verizon s8 be flashed to tmobile flavor with this FW ?
insomnia said:
can a verizon s8 be flashed to tmobile flavor with this FW ?
Click to expand...
Click to collapse
It can. Which is amazing
ethanscooter said:
It can. Which is amazing
Click to expand...
Click to collapse
Excellent!
Anyone try it and have a success story ? any gotchas to be careful about ?
insomnia said:
Excellent!
Anyone try it and have a success story ? any gotchas to be careful about ?
Click to expand...
Click to collapse
I have ATT firmware/carrier phone and plan on flashing this TMO firmware a little later tonight once I get some free time.
Sent from my SM-G950U using XDA-Developers Legacy app
JUSMEJOSE said:
Make sure you enable OEM Unlock before flashing!! you can use this to return back to stock!!
AP_G950USQU1AQD9_CL11131491_QB13157259_REV00_user_low_ship_MULTI_CERT_meta.tar.md5
BL_G950USQU1AQD9_CL11131491_QB13157259_REV00_user_low_ship_MULTI_CERT.tar.md5
CP_G950USQU1AQD9_CP6187179_CL11131491_QB13157259_REV00_user_low_ship_MULTI_CERT.tar.md5
CSC_OYN_G950UOYN1AQD9_CL11131491_QB13157259_REV00_user_low_ship_MULTI_CERT.tar.md5
HOME_CSC_OYN_G950UOYN1AQD9_CL11131491_QB13157259_REV00_user_low_ship_MULTI_CERT.tar.md5
USERDATA_TMB_G950USQU1AQD9_CL11131491_QB13157259_REV00_user_low_ship_MULTI_CERT.tar.md5
https://www.androidfilehost.com/?fid=745425885120726190
Note
This is for Tmobile variant I don't have the device you can try and flash to other Qualcomm model at your own risk!!
Click to expand...
Click to collapse
`SBR` said:
Thanks for it... But there is no oem unlocking menu in developer option..
How should we proceed with it..
View attachment 4121411
Sent from my SM-G955U using Tapatalk
Click to expand...
Click to collapse
Also curious about the lack of OEM in dev options?
Haven't run Samsung in a while and didn't care before but do now
Will Odin trigger Knox?
Can I flash the firmware only as this update seems to carry a bit of issue with it plus no remapping Bixby button?
Would like to flash my Verizon model to AT&T.
I've tried this 3 times to my Verizon model and it still shows as a Verizon model. Everything passes in ODIN and it installs just fine. But it's still Verizon. Is this definitely a T-Mobile Firmware?
sillyphillie said:
I've tried this 3 times to my Verizon model and it still shows as a Verizon model. Everything passes in ODIN and it installs just fine. But it's still Verizon. Is this definitely a T-Mobile Firmware?
Click to expand...
Click to collapse
I know this seems silly, but did you take out your Verizon SIM?
Not silly at all. I had no sim in. Should I put my T-Mobile SIM in and try again?
---------- Post added at 09:34 AM ---------- Previous post was at 08:50 AM ----------
I flashed with the T-Mobile SIM in. Still no dice. I'm putting in the AP,BL,CP, and CSC only correct? Which CSC BTW? CSC_OYN or HOME_CSC_OYN? What about the user data file?
sillyphillie said:
Not silly at all. I had no sim in. Should I put my T-Mobile SIM in and try again?
---------- Post added at 09:34 AM ---------- Previous post was at 08:50 AM ----------
I flashed with the T-Mobile SIM in. Still no dice. I'm putting in the AP,BL,CP, and CSC only correct? Which CSC BTW? CSC_OYN or HOME_CSC_OYN? What about the user data file?
Click to expand...
Click to collapse
I've still yet to figure out how to flash the userdata file in Odin, no place for it. Ugh so frustrating
thank you! Just what I needed.
Does anyone have the Unlocked Firmware for the S8 yet?
Or will we have to wait until the Unlocked S8 phones are released before we can flash the unlocked firmware?
Thanks!
Bladescarr said:
Does anyone have the Unlocked Firmware for the S8 yet?
Or will we have to wait until the Unlocked S8 phones are released before we can flash the unlocked firmware?
Thanks!
Click to expand...
Click to collapse
not yet?
mweinbach said:
not yet?
Click to expand...
Click to collapse
It was just a question. Sorry to annoy you.
Bladescarr said:
It was just a question. Sorry to annoy you.
Click to expand...
Click to collapse
no annoyance. I hit the wrong key.
mweinbach said:
no annoyance. I hit the wrong key.
Click to expand...
Click to collapse
Alright, Sorry for what I said, and seriously, thanks for the answer!
sillyphillie said:
Not silly at all. I had no sim in. Should I put my T-Mobile SIM in and try again?
---------- Post added at 09:34 AM ---------- Previous post was at 08:50 AM ----------
I flashed with the T-Mobile SIM in. Still no dice. I'm putting in the AP,BL,CP, and CSC only correct? Which CSC BTW? CSC_OYN or HOME_CSC_OYN? What about the user data file?
Click to expand...
Click to collapse
Tried it too and after PASS on oding and reboot... I am seeing verizon boot up!
Why does everyone want to flash the TMobile FW?

SM-G950FD Official ROM

I have just acquired the international factory unlocked Galaxy S8, model number SM-G950FD duel sim, and don't see that specific variant on Sammobile official rom downloads. There are many SM-G950F downloads and correct me if I'm wrong, but I assume they would work, only problem is don't know which region I should use. There are 7 or 8 different regions with the matching PDA and CSC sequences as mine, but does it matter which one I choose? Just want to be sure I have the proper "official" backup rom before I venture into rooting etc.
Have searched this thread and the net to no avail.
Any advice and clarification on this would be greatly appreciated!
G950FD is a variant of G950F. But still I'm not sure if you can flash it or not because modem, bootloader and baseband are exact model number exclusive. Btw Sammobile is not official provider of stock rom. You can try using Samsung's official app.
OK thanks! Now when you say "try using Samsung's official app", do you mean Smartswitch for Windows or Kies 3 or something other?
eltoro5 said:
OK thanks! Now when you say "try using Samsung's official app", do you mean Smartswitch for Windows or Kies 3 or something other?
Click to expand...
Click to collapse
Yes I was talking about SmartSwitch.
Fd and f are the same just flash away
undercontr said:
Yes I was talking about SmartSwitch.
Click to expand...
Click to collapse
So sure enough I locked myself out of my phone after rooting (don't ask) only access was download mode, so I tried SmartSwitch and it got me back up and running! So thank you very much for the tip "undercontr"!
Only thing I would suggest is to ensure you have your phone's serial number (required for SmartSwitch) on hand. Because other than acquiring from the dialer code, the only other place is on the sticker on back of phone....it's not on the box. So keep your sticker in a safe place when you remove from back of phone!
eltoro5 said:
So sure enough I locked myself out of my phone after rooting (don't ask) only access was download mode, so I tried SmartSwitch and it got me back up and running! So thank you very much for the tip "undercontr"!
Only thing I would suggest is to ensure you have your phone's serial number (required for SmartSwitch) on hand. Because other than acquiring from the dialer code, the only other place is on the sticker on back of phone....it's not on the box. So keep your sticker in a safe place when you remove from back of phone!
Click to expand...
Click to collapse
If you're not hanging around forbidden stuff in Android, you should always stick to official stuff. Stability is greater in that way.
I wouldn't root my device if it has still warranty.
Rom [[ sm-g950f ]] (( turkey )) from sammobile
work on sm-g950fd >>>
mlikal3oood said:
Rom [[ sm-g950f ]] (( turkey )) from sammobile
work on sm-g950fd >>>
Click to expand...
Click to collapse
I have SM-G950FD (Duos model) . Can i use SM-950F (Turkey) firmware for DUOS Model ? Tested ? After flash firmware any signal problem ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
F Firmware works for FD as well. There's no difference.
Pull the firmware for SM-G950F from Samfirm tool, according to your region.
JazonX said:
F Firmware works for FD as well. There's no difference.
Pull the firmware for SM-G950F from Samfirm tool, according to your region.
Click to expand...
Click to collapse
Did you try on S8 Duos ?
Worked Perfectly Single Sim - Dual Sim firmware same. SM-G950F
ok, the F firmware works well on FD device, but can I put 2 sim cards on F firmware or it will work with one sim card only?
DJC_SP said:
ok, the F firmware works well on FD device, but can I put 2 sim cards on F firmware or it will work with one sim card only?
Click to expand...
Click to collapse
2 Simcard working perfectly same time.
I have G950F phone, and I'm trying to get Samsung Pay US to work. Can I flash G950FD (XSG) firmware on my G950F phone?
When I had my S7 edge (G935F), I had XSG firmware and I was able to get Samsung Pay US to work but XSG model was G935F then and not G935FD.
alidarkstone said:
Did you try on S8 Duos ?
Click to expand...
Click to collapse
Yes, Mine is XSG. So using the MID firmware from SAMFIRM.
eltoro5 said:
I have just acquired the international factory unlocked Galaxy S8, model number SM-G950FD duel sim, and don't see that specific variant on Sammobile official rom downloads. There are many SM-G950F downloads and correct me if I'm wrong, but I assume they would work, only problem is don't know which region I should use. There are 7 or 8 different regions with the matching PDA and CSC sequences as mine, but does it matter which one I choose? Just want to be sure I have the proper "official" backup rom before I venture into rooting etc.
Have searched this thread and the net to no avail.
Any advice and clarification on this would be greatly appreciated!
Click to expand...
Click to collapse
(sorry I am noob, cannot post formatted hyperlink): updato.com/firmware-archive-select-model is good for downloading firmware.
And thanks to everyone here! - I was coming to ask same question: Would I brick my SM-G955FD by flashing SM-G955F software.. (to enable native WiFi Callling/VoWiFi by fllashing to a region which does not have SM-G955FD specific firmware).
Can you get like a another sim tray and use sd card? I'm presuming its the same as F and no real changes tbh
MrPhilo said:
Can you get like a another sim tray and use sd card? I'm presuming its the same as F and no real changes tbh
Click to expand...
Click to collapse
I just checked my Duo; The SIM Tray has a 'SIM1' slot, and a 'SIM2/MicroSD' slot which looks like it can take either (not both).
work bouth card

~G955U~AT&T Stock Odin files G955USQS1AQF7

AT&T Stock ODIN G955USQS1AQF7 , For those that might need it!
Link: https://www.androidfilehost.com/?fid=961840155545583640
MD5: 91ac5aa5686452bb1434b11bb796eeb2
ODIN v3.12.5: https://www.androidfilehost.com/?fid=817550096634787635
MD5: b842e9d1c91f4fe8c9394ee9859320b0
Spent forever downloading from updato, then the zip wouldn't extract
Sent from my SM-G955U using Tapatalk
Link is up!
Venom0642 said:
Link is up!
Click to expand...
Click to collapse
Awesome!! If LRA region are AT&T I will have very easy way to download Odin firmware as soon as at&t release update.
On Edge of Galaxy
This works wonderfully!! Bixby works now!! Thank you!
should I only flash ap if I don't wanna lose data or am I supposed to flash everything?
I flashed everything and I didn't lose any data. Except home and userdata. I used 4 files only.
Venom0642 said:
Link is up!
Click to expand...
Click to collapse
Ok here you got , i think this is exactly same firmware.
Download zip from attachment
unzip and start
In model :SM- G955U
In region : LRA, USC or ACG all regions are same as AT&T if you just flash 4 files with out HOME_CRC or USER_DATA
Check : auto, checkCRC32, Decrypt automatically
hit : Check for updates.
it took me around 7 min to download firmware.
EDIT: Has tag from what i download my way is exactly the same as yours
EDIT2: fixed error.
norbarb said:
Ok here you got , i think this is exactly same firmware.
Download zip from attachment
unzip and start
In model : G955U
In region : LRA
Check : auto, checkCRC32, Decrypt automatically
hit : Check for updates.
it took me around 7 min to download firmware.
EDIT: Has tag from what i download my way is exactly the same as yours
Click to expand...
Click to collapse
This is what shows when hit update!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Venom0642 said:
This is what shows when hit update!
View attachment 4220431
Click to expand...
Click to collapse
It is my mistake... forget to add SM-G955U ...lol
Model should looks like this : SM-G955U
norbarb said:
It is my mistake... forget to add SM-G955U ...lol
Model should looks like this : SM-G955U
Click to expand...
Click to collapse
Yup same one took me 5min and 14sec to download it lol , but it's AT&T S8 Plus QF7
Sent from my Samsung Galaxy S8+ using XDA Labs
Venom0642 said:
Yup same one took me 5min and 14sec to download it lol , but it's AT&T S8 Plus QF7
Sent from my Samsung Galaxy S8+ using XDA Labs
Click to expand...
Click to collapse
Looks like do to weekend they did not updated yet to QG1
First Time
I flashed my T-Mobile S8+ to AT&T successfully the other day. In order for me to install this newer version, I assume I just have to do it in Odin like before? I followed this guide (Flashing Standard Firmware) after doing the Carrier Switch last time: https://forum.xda-developers.com/galaxy-s8+/how-to/snap-guide-flashing-standard-fw-carrier-t3627255
Just making sure from now on I just basically have to do the updates in Odin...
Venom0642 said:
AT&T Stock ODIN G955USQS1AQF7 , For those that might need it!
Link: https://www.androidfilehost.com/?fid=961840155545583640
MD5: 91ac5aa5686452bb1434b11bb796eeb2
ODIN v3.12.5: https://www.androidfilehost.com/?fid=817550096634787635
MD5: b842e9d1c91f4fe8c9394ee9859320b0
Click to expand...
Click to collapse
I have a Verizon galaxy s8 plus that I am currently using on AT&T's prepaid service can I install this software/firmware on my phone without the risk of bricking it?
I don't need to have the phone unlocked correct? (if that is even possible right now)
norbarb said:
Awesome!! If LRA region are AT&T I will have very easy way to download Odin firmware as soon as at&t release update.
On Edge of Galaxy
Click to expand...
Click to collapse
what is LRA region? (noob question I know)
Ma$etas said:
I have a Verizon galaxy s8 plus that I am currently using on AT&T's prepaid service can I install this software/firmware on my phone without the risk of bricking it?
I don't need to have the phone unlocked correct? (if that is even possible right now)
what is LRA region? (noob question I know)
Click to expand...
Click to collapse
LRA region are Bluegrass service by Verizon. I did not flash this firmware but people claim this is same as AT&T. Yes you can flash w/o any problem.
On Edge of Galaxy
A newb here...
I am on AT&T with AT&T stock firmware G955USQU1AQC9 with March 1, 2017 security patch level after flashing T-mobile S8+ using one of the tutorials here. I am not getting OTA, device says I have the most recent firmware...
I have two concerns here:
1. If I download this and flash it using ODIN will I be able to get the July security patch via OTA?
2. Which files should I use in order to keep device as is, without loosing any data or settings?
I flashed this and did not receive the OTA update to AQG1. I am on ATT and did not change my carrier firmware. What gives? Thanks
If anybody can answer this.... what is the difference from G955USQU1AQGF and G955U1UEU1AQG2
blkghost22 said:
If anybody can answer this.... what is the difference from G955USQU1AQGF and G955U1UEU1AQG2View attachment 4229126
Click to expand...
Click to collapse
There is no AQG2 firmware and we know that AQGF exists. This is huge difference.
On Edge of Galaxy
I am about to flash this file I already have everything extracted and ODIN opened.
but I see from the extracted file there is 6 files available but ODIN only has 5 slots.
Extracted are
AP, BL, CP, CSC_OYN, HOME_CSC_OYN, and user data.
but odin only has slots for
AP, BL, CP, CSC, UMS
can someone tell me what I use in each slot (besides the AP, BL, CP)
what CSC file do use for CSC slot is it CSC_OYN or Home_CSC_OYN?
EDIT: so I found that Home_CSC goes in CSC and this one is used when you don't want anything to be wiped.
CSC_OYN is used when you want to wipe.
Now just need to know what to put in UMS

Android 8.0 Oreo Beta registrations starts on October 31

I case you didn't hear about this!
Here is the article on SamMobile: https://www.sammobile.com/2017/10/26/galaxy-s8-oreo-beta-program-may-go-live-us-october-31/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Really?
Let's see
Well it is always speculation with firmware updates and Samsung until we actually get an update.
tecksulfur said:
I case you didn't hear about this!
Here is the article on SamMobile: https://www.sammobile.com/2017/10/26/galaxy-s8-oreo-beta-program-may-go-live-us-october-31/
Click to expand...
Click to collapse
Sammobile is not opening for me since yesterday using Samsung internet
Laleka said:
Sammobile is not opening for me since yesterday using Samsung internet
Click to expand...
Click to collapse
Working just fine, maybe it's your DNS, or cache? ( I use Samsung Internet Beta )
tecksulfur said:
I case you didn't hear about this!
Here is the article on SamMobile: https://www.sammobile.com/2017/10/26/galaxy-s8-oreo-beta-program-may-go-live-us-october-31/
Click to expand...
Click to collapse
Correct, and it will be also available for United Kingdom & Korea; date is not confirmed yet...
In the 2nd phase, registering will also be opened for Germany, Spain, France, Poland, India & China
More info will be revealed by Samsung this week...
Source: Galaxy S8 Oreo beta program will go live in these countries
@Dejan Kruljac : the only thing FAKE is your post, AND the person you admire on the GIF
I'm currently running the EE firmware on the international version. I assume the beta will only be available for the unlocked variant (BTU/XEU CSC. Therefore I want to be prepared in advance. Can I just download the latest BTU or XEU firmware from Sam Mobile and then I will be eligible for the beta program? After looking through the various firmware threads, there seems to be conflicting reports about how to flash a rom which will permanently change the CSC. Will flashing the BTU or XEU firmware suffice? I've also seen people have success with flashing a multi csc rom and change the csc via the (old samsung method) dialer method using the imei number - which will also reset the device. Can anyone confirm the current method?
Thanks
redbullman said:
I'm currently running the EE firmware on the international version. I assume the beta will only be available for the unlocked variant (BTU/XEU CSC. Therefore I want to be prepared in advance. Can I just download the latest BTU or XEU firmware from Sam Mobile and then I will be eligible for the beta program? After looking through the various firmware threads, there seems to be conflicting reports about how to flash a rom which will permanently change the CSC. Will flashing the BTU or XEU firmware suffice? I've also seen people have success with flashing a multi csc rom and change the csc via the (old samsung method) dialer method using the imei number - which will also reset the device. Can anyone confirm the current method?
Thanks
Click to expand...
Click to collapse
You can't permachange CSC by flashing one, the final CSC is hard coded at a lower level on non-flashed storage that would require root to adjust (but you could unroot right after) and a fairly comprehensive understanding of tw
partcyborg said:
You can't permachange CSC by flashing one, the final CSC is hard coded at a lower level on non-flashed storage that would require root to adjust (but you could unroot right after) and a fairly comprehensive understanding of tw
Click to expand...
Click to collapse
Thanks. I yesterday flashed the latest October security update Samsung rom with oxm csc. The csc has now changed to xeu, which is one of the 2 unlocked carrier free cscs in the UK so I'm happy. All ready for the oreo beta now!
Hello, Which one exactly did you flash? and where can i download it?
---------- Post added at 06:23 PM ---------- Previous post was at 06:21 PM ----------
redbullman said:
Thanks. I yesterday flashed the latest October security update Samsung rom with oxm csc. The csc has now changed to xeu, which is one of the 2 unlocked carrier free cscs in the UK so I'm happy. All ready for the oreo beta now!
Click to expand...
Click to collapse
Can you please specify which firmware you flashed? Which country ...? or can you post the link to download it?
31 october 2018 i think
As 2017 nothing comes at it
redbullman said:
Thanks. I yesterday flashed the latest October security update Samsung rom with oxm csc. The csc has now changed to xeu, which is one of the 2 unlocked carrier free cscs in the UK so I'm happy. All ready for the oreo beta now!
Click to expand...
Click to collapse
You get it only, when "Software Serviceprovider" (in Version info) shows:
XEU/XEU/*** (where *** is the product-code of your device which you can't change!)
---------- Post added at 08:15 PM ---------- Previous post was at 08:12 PM ----------
phil.asmar said:
Hello, Which one exactly did you flash? and where can i download it?
---------- Post added at 06:23 PM ---------- Previous post was at 06:21 PM ----------
Can you please specify which firmware you flashed? Which country ...? or can you post the link to download it?
Click to expand...
Click to collapse
XEU is part of the Multi-CSC OXM (which all unbranded Europeans phones have)...
If you DON'T have a UK-SIM card, you CAN'T change your phone to XEU! A UK-SIM card must be in your device, reset it, and your CSC will change to XEU/XEU/*** (where *** is the product-code of your device)
henklbr said:
You get it only, when "Software Serviceprovider" (in Version info) shows:
XEU/XEU/*** (where *** is the product-code of your device which you can't change!)
Do you know that for sure? Because changing csc works for normal ota updates. Why would it not work for the oreo beta? Makes no sense.
My csc is now xeu/xeu/evr. You sure I won't get It? You're the first person to suggest amending the csc won't work with the oreo beta.
Click to expand...
Click to collapse
redbullman said:
henklbr said:
You get it only, when "Software Serviceprovider" (in Version info) shows:
XEU/XEU/*** (where *** is the product-code of your device which you can't change!)
Do you know that for sure? Because changing csc works for normal ota updates. Why would it not work for the oreo beta? Makes no sense.
My csc is now xeu/xeu/evr. You sure I won't get It? You're the first person to suggest amending the csc won't work with the oreo beta.
Click to expand...
Click to collapse
You will get it, because the 1st 2 are the same; the last one, EVR, can't be changed because that's your Product-code
With XEU/XEU/EVR you WILL receive XEU-updates
Click to expand...
Click to collapse
henklbr said:
redbullman said:
You will get it, because the 1st 2 are the same; the last one, EVR, can't be changed because that's your Product-code
With XEU/XEU/EVR you WILL receive XEU-updates
Click to expand...
Click to collapse
Great thanks!
Click to expand...
Click to collapse

Categories

Resources