I have just acquired the international factory unlocked Galaxy S8, model number SM-G950FD duel sim, and don't see that specific variant on Sammobile official rom downloads. There are many SM-G950F downloads and correct me if I'm wrong, but I assume they would work, only problem is don't know which region I should use. There are 7 or 8 different regions with the matching PDA and CSC sequences as mine, but does it matter which one I choose? Just want to be sure I have the proper "official" backup rom before I venture into rooting etc.
Have searched this thread and the net to no avail.
Any advice and clarification on this would be greatly appreciated!
G950FD is a variant of G950F. But still I'm not sure if you can flash it or not because modem, bootloader and baseband are exact model number exclusive. Btw Sammobile is not official provider of stock rom. You can try using Samsung's official app.
OK thanks! Now when you say "try using Samsung's official app", do you mean Smartswitch for Windows or Kies 3 or something other?
eltoro5 said:
OK thanks! Now when you say "try using Samsung's official app", do you mean Smartswitch for Windows or Kies 3 or something other?
Click to expand...
Click to collapse
Yes I was talking about SmartSwitch.
Fd and f are the same just flash away
undercontr said:
Yes I was talking about SmartSwitch.
Click to expand...
Click to collapse
So sure enough I locked myself out of my phone after rooting (don't ask) only access was download mode, so I tried SmartSwitch and it got me back up and running! So thank you very much for the tip "undercontr"!
Only thing I would suggest is to ensure you have your phone's serial number (required for SmartSwitch) on hand. Because other than acquiring from the dialer code, the only other place is on the sticker on back of phone....it's not on the box. So keep your sticker in a safe place when you remove from back of phone!
eltoro5 said:
So sure enough I locked myself out of my phone after rooting (don't ask) only access was download mode, so I tried SmartSwitch and it got me back up and running! So thank you very much for the tip "undercontr"!
Only thing I would suggest is to ensure you have your phone's serial number (required for SmartSwitch) on hand. Because other than acquiring from the dialer code, the only other place is on the sticker on back of phone....it's not on the box. So keep your sticker in a safe place when you remove from back of phone!
Click to expand...
Click to collapse
If you're not hanging around forbidden stuff in Android, you should always stick to official stuff. Stability is greater in that way.
I wouldn't root my device if it has still warranty.
Rom [[ sm-g950f ]] (( turkey )) from sammobile
work on sm-g950fd >>>
mlikal3oood said:
Rom [[ sm-g950f ]] (( turkey )) from sammobile
work on sm-g950fd >>>
Click to expand...
Click to collapse
I have SM-G950FD (Duos model) . Can i use SM-950F (Turkey) firmware for DUOS Model ? Tested ? After flash firmware any signal problem ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
F Firmware works for FD as well. There's no difference.
Pull the firmware for SM-G950F from Samfirm tool, according to your region.
JazonX said:
F Firmware works for FD as well. There's no difference.
Pull the firmware for SM-G950F from Samfirm tool, according to your region.
Click to expand...
Click to collapse
Did you try on S8 Duos ?
Worked Perfectly Single Sim - Dual Sim firmware same. SM-G950F
ok, the F firmware works well on FD device, but can I put 2 sim cards on F firmware or it will work with one sim card only?
DJC_SP said:
ok, the F firmware works well on FD device, but can I put 2 sim cards on F firmware or it will work with one sim card only?
Click to expand...
Click to collapse
2 Simcard working perfectly same time.
I have G950F phone, and I'm trying to get Samsung Pay US to work. Can I flash G950FD (XSG) firmware on my G950F phone?
When I had my S7 edge (G935F), I had XSG firmware and I was able to get Samsung Pay US to work but XSG model was G935F then and not G935FD.
alidarkstone said:
Did you try on S8 Duos ?
Click to expand...
Click to collapse
Yes, Mine is XSG. So using the MID firmware from SAMFIRM.
eltoro5 said:
I have just acquired the international factory unlocked Galaxy S8, model number SM-G950FD duel sim, and don't see that specific variant on Sammobile official rom downloads. There are many SM-G950F downloads and correct me if I'm wrong, but I assume they would work, only problem is don't know which region I should use. There are 7 or 8 different regions with the matching PDA and CSC sequences as mine, but does it matter which one I choose? Just want to be sure I have the proper "official" backup rom before I venture into rooting etc.
Have searched this thread and the net to no avail.
Any advice and clarification on this would be greatly appreciated!
Click to expand...
Click to collapse
(sorry I am noob, cannot post formatted hyperlink): updato.com/firmware-archive-select-model is good for downloading firmware.
And thanks to everyone here! - I was coming to ask same question: Would I brick my SM-G955FD by flashing SM-G955F software.. (to enable native WiFi Callling/VoWiFi by fllashing to a region which does not have SM-G955FD specific firmware).
Can you get like a another sim tray and use sd card? I'm presuming its the same as F and no real changes tbh
MrPhilo said:
Can you get like a another sim tray and use sd card? I'm presuming its the same as F and no real changes tbh
Click to expand...
Click to collapse
I just checked my Duo; The SIM Tray has a 'SIM1' slot, and a 'SIM2/MicroSD' slot which looks like it can take either (not both).
work bouth card
Related
Galaxy Note 5 N920CXXU1AOH2
Hello Guys This is the Complete firmware for SM-N920C ,includes AP, CP ,BL and CSC. I hope this might be helpfull to start the development .
Update:- Firmware uploaded
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DOWNLOAD : https://mega.nz/#F!BANCVDQZ!msbQM_SGXwxT-5LcrrUzvA
vysakhvineetha said:
Mod Edit: Long quote of the OP removed.
Click to expand...
Click to collapse
Thanks thats awesome, Waiting for Chainfire's Root
I hope this is a good start to a great thing lol
for which variant?
Lmax579 said:
for which variant?
Click to expand...
Click to collapse
SM-N920C
vysakhvineetha said:
Galaxy Note 5 N920CXXU1AOH2
Hello Guys This is the Complete firmware for SM-N920C ,includes AP, CP ,BL and CSC. I hope this might be helpfull to start the development .
Update:- Firmware uploaded
DOWNLOAD : https://mega.nz/#F!BANCVDQZ!msbQM_SGXwxT-5LcrrUzvA
Click to expand...
Click to collapse
I'm looking for SM-N920C Full official Firmware with CSC XXV or XEV
May you help me?
Thank for advance!
I found Galaxy Note 5 SM-N920C stock firmware for all region and carriers from
SM- N920C Stock Firmware
Hello,
if i buy this version, the native language is english, right? Can i change to portuguese?
Thank you
Will it work with dual sim SM-N920C ?
Jmakhdoom said:
Will it work with dual sim SM-N920C ?
Click to expand...
Click to collapse
same question.....
can I use it to the N920CD in order to get the LTE band 20?
I would like to buy the Note 5 dual sim but in some European Country like Italy , Vodafone using the Band 20 which is missing in the N9208 and N920CD ,
so in this case if it is possible to use the N920C firmaware in order to get the Band 20 in the N920CD it is a Great news....
do you know if any one already did it ?
thanks and have a nice weekend
THANKS! @samsumo
Hello
Excuse my bad english it's the reason of my question...
I bought one Note 5 in the USA and I look for the way to install French. Is it possible with which ROM : N920IDVU2AOJ3?
Palmiped
Palmiped said:
Hello
Excuse my bad english it's the reason of my question...
I bought one Note 5 in the USA and I look for the way to install French. Is it possible with which ROM : N920IDVU2AOJ3?
Palmiped
Click to expand...
Click to collapse
if your model is 920I then you can flash this firmware.
mtayabkk said:
if your model is 920I then you can flash this firmware.
Click to expand...
Click to collapse
Thank you for the answer. Sorry if my question is stupid, I am competent not at all in this domain.
Thus I can flash my Note 5 ( N920IDVU2AOJ3) with the version given here ( N920CXXU1AOH2) in order to get French?
In my searches I also found others ROM (on "ndroidzone") around N920IDVU1AO and many different letters at the end.
Is their compatibility with my phone better and how to know if those there contain French?
Thank you
Do not flash an N920C firmware to an N920I phone.
Robi-K said:
Do not flash an N920C firmware to an N920I phone.
Click to expand...
Click to collapse
Why?
Sent from my SM-N920I using XDA Free mobile app
Cause you will brick it.
Robi-K said:
Cause you will brick it.
Click to expand...
Click to collapse
How can that be when they are the same phone just different region.
They have exact same hardware inside .
Do you know a technical reason why same phones can not use MM
The modem/baseband part is different in these two phones. I am 99% sure if you flash either phone with the others firmware you will end up with a softbricked phone.
Baseband and modem only affect the ability to use network so if your country doesn't have that frequency then yes phone won't work..won't soft brick but won't get any signal either..
They are identical phones expect they are made for different regions...
Mine is optus AU the c model could be anything from Afghanistan to Vietnam. ..
Sent from my SM-N920I using XDA Free mobile app
AT&T Stock ODIN G955USQS1AQF7 , For those that might need it!
Link: https://www.androidfilehost.com/?fid=961840155545583640
MD5: 91ac5aa5686452bb1434b11bb796eeb2
ODIN v3.12.5: https://www.androidfilehost.com/?fid=817550096634787635
MD5: b842e9d1c91f4fe8c9394ee9859320b0
Spent forever downloading from updato, then the zip wouldn't extract
Sent from my SM-G955U using Tapatalk
Link is up!
Venom0642 said:
Link is up!
Click to expand...
Click to collapse
Awesome!! If LRA region are AT&T I will have very easy way to download Odin firmware as soon as at&t release update.
On Edge of Galaxy
This works wonderfully!! Bixby works now!! Thank you!
should I only flash ap if I don't wanna lose data or am I supposed to flash everything?
I flashed everything and I didn't lose any data. Except home and userdata. I used 4 files only.
Venom0642 said:
Link is up!
Click to expand...
Click to collapse
Ok here you got , i think this is exactly same firmware.
Download zip from attachment
unzip and start
In model :SM- G955U
In region : LRA, USC or ACG all regions are same as AT&T if you just flash 4 files with out HOME_CRC or USER_DATA
Check : auto, checkCRC32, Decrypt automatically
hit : Check for updates.
it took me around 7 min to download firmware.
EDIT: Has tag from what i download my way is exactly the same as yours
EDIT2: fixed error.
norbarb said:
Ok here you got , i think this is exactly same firmware.
Download zip from attachment
unzip and start
In model : G955U
In region : LRA
Check : auto, checkCRC32, Decrypt automatically
hit : Check for updates.
it took me around 7 min to download firmware.
EDIT: Has tag from what i download my way is exactly the same as yours
Click to expand...
Click to collapse
This is what shows when hit update!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Venom0642 said:
This is what shows when hit update!
View attachment 4220431
Click to expand...
Click to collapse
It is my mistake... forget to add SM-G955U ...lol
Model should looks like this : SM-G955U
norbarb said:
It is my mistake... forget to add SM-G955U ...lol
Model should looks like this : SM-G955U
Click to expand...
Click to collapse
Yup same one took me 5min and 14sec to download it lol , but it's AT&T S8 Plus QF7
Sent from my Samsung Galaxy S8+ using XDA Labs
Venom0642 said:
Yup same one took me 5min and 14sec to download it lol , but it's AT&T S8 Plus QF7
Sent from my Samsung Galaxy S8+ using XDA Labs
Click to expand...
Click to collapse
Looks like do to weekend they did not updated yet to QG1
First Time
I flashed my T-Mobile S8+ to AT&T successfully the other day. In order for me to install this newer version, I assume I just have to do it in Odin like before? I followed this guide (Flashing Standard Firmware) after doing the Carrier Switch last time: https://forum.xda-developers.com/galaxy-s8+/how-to/snap-guide-flashing-standard-fw-carrier-t3627255
Just making sure from now on I just basically have to do the updates in Odin...
Venom0642 said:
AT&T Stock ODIN G955USQS1AQF7 , For those that might need it!
Link: https://www.androidfilehost.com/?fid=961840155545583640
MD5: 91ac5aa5686452bb1434b11bb796eeb2
ODIN v3.12.5: https://www.androidfilehost.com/?fid=817550096634787635
MD5: b842e9d1c91f4fe8c9394ee9859320b0
Click to expand...
Click to collapse
I have a Verizon galaxy s8 plus that I am currently using on AT&T's prepaid service can I install this software/firmware on my phone without the risk of bricking it?
I don't need to have the phone unlocked correct? (if that is even possible right now)
norbarb said:
Awesome!! If LRA region are AT&T I will have very easy way to download Odin firmware as soon as at&t release update.
On Edge of Galaxy
Click to expand...
Click to collapse
what is LRA region? (noob question I know)
Ma$etas said:
I have a Verizon galaxy s8 plus that I am currently using on AT&T's prepaid service can I install this software/firmware on my phone without the risk of bricking it?
I don't need to have the phone unlocked correct? (if that is even possible right now)
what is LRA region? (noob question I know)
Click to expand...
Click to collapse
LRA region are Bluegrass service by Verizon. I did not flash this firmware but people claim this is same as AT&T. Yes you can flash w/o any problem.
On Edge of Galaxy
A newb here...
I am on AT&T with AT&T stock firmware G955USQU1AQC9 with March 1, 2017 security patch level after flashing T-mobile S8+ using one of the tutorials here. I am not getting OTA, device says I have the most recent firmware...
I have two concerns here:
1. If I download this and flash it using ODIN will I be able to get the July security patch via OTA?
2. Which files should I use in order to keep device as is, without loosing any data or settings?
I flashed this and did not receive the OTA update to AQG1. I am on ATT and did not change my carrier firmware. What gives? Thanks
If anybody can answer this.... what is the difference from G955USQU1AQGF and G955U1UEU1AQG2
blkghost22 said:
If anybody can answer this.... what is the difference from G955USQU1AQGF and G955U1UEU1AQG2View attachment 4229126
Click to expand...
Click to collapse
There is no AQG2 firmware and we know that AQGF exists. This is huge difference.
On Edge of Galaxy
I am about to flash this file I already have everything extracted and ODIN opened.
but I see from the extracted file there is 6 files available but ODIN only has 5 slots.
Extracted are
AP, BL, CP, CSC_OYN, HOME_CSC_OYN, and user data.
but odin only has slots for
AP, BL, CP, CSC, UMS
can someone tell me what I use in each slot (besides the AP, BL, CP)
what CSC file do use for CSC slot is it CSC_OYN or Home_CSC_OYN?
EDIT: so I found that Home_CSC goes in CSC and this one is used when you don't want anything to be wiped.
CSC_OYN is used when you want to wipe.
Now just need to know what to put in UMS
Hello xda members, as title says, i want to install G935U firmware on my T-Mobile device, currently iam on stock T-Mobile firmware (as shown below) ...
Its my first US model device, so bit scared about doing this type of installation, thats why iam here to ask for help ...
So please guide me how to install this U firmware on my T-Mobile device, and is it safe to do it or not, and which files are required for flashing in odin ...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ammad368 said:
Hello xda members, as title says, i want to install G935U firmware on my T-Mobile device, currently iam on stock T-Mobile firmware (as shown below) ...
Its my first US model device, so bit scared about doing this type of installation, thats why iam here to ask for help ...
So please guide me how to install this U firmware on my T-Mobile device, and is it safe to do it or not, and which files are required for flashing in odin ...
View attachment 4363061View attachment 4363062View attachment 4363063
Click to expand...
Click to collapse
I have heard the roms are interchangeable, I would try but this is the only phone I have atm so I dunno
Anyone who would like to help ?
I need step-by-step guide ...
ammad368 said:
Anyone who would like to help ?
I need step-by-step guide ...
Click to expand...
Click to collapse
Just search around the forums, they have a few guides. I would suggest looking at the att and Verizon forums for the s7 edge. The roms are interchangeable
https://forum.xda-developers.com/ve...de-flashing-sm-935u-firmware-verizon-t3415145.
My phone is G935T and I flashed G935U.
There is no auto upgrade, so it is a bit tedious every time there is new firmware out, manually has to flash, but otherwise it is VERY lean on included applications and also IMHO is lighter on battery usage.
That said, just get the ODIN and both firmwares (G935T firmware as well as G935U firmware).
Then, use ODIN to flash the CP file from G935T firmware and rest of the files from G935U firmware.
Enjoy.
hpark21 said:
My phone is G935T and I flashed G935U.
There is no auto upgrade, so it is a bit tedious every time there is new firmware out, manually has to flash, but otherwise it is VERY lean on included applications and also IMHO is lighter on battery usage.
That said, just get the ODIN and both firmwares (G935T firmware as well as G935U firmware).
Then, use ODIN to flash the CP file from G935T firmware and rest of the files from G935U firmware.
Enjoy.
Click to expand...
Click to collapse
I also have 935T and updated to 935U few months ago. I get OTA updates regularly
cnewsgrp said:
I also have 935T and updated to 935U few months ago. I get OTA updates regularly
Click to expand...
Click to collapse
Did you flash the U firmware with CP file from T like I did? (Which is preferred since I am still using the phone on T-mobile network)
Whenever I press "check for update", I always get "you have latest" message even when I KNOW there is new one out there.
Perhaps if ALL firmware files are from "U" firmware, maybe it will do auto update (or prompt you for update).
hpark21 said:
Did you flash the U firmware with CP file from T like I did? (Which is preferred since I am still using the phone on T-mobile network)
Whenever I press "check for update", I always get "you have latest" message even when I KNOW there is new one out there.
Perhaps if ALL firmware files are from "U" firmware, maybe it will do auto update (or prompt you for update).
Click to expand...
Click to collapse
In order to update, you must have all files from the same update. So running the tmobile radio is why it won't update you.
Sent from my SM-G935U using XDA Premium HD app
I can confirm this does work. I just installed the 935U software on my tmobile s7 edge and am now using the phone on Page Plus service. Everything is working great for over 24 hours now.
Hello,
I would like to update my S7 edge G935T to G935U.
THE ONLY PROBLEM is that it is the only phone I have and that I use so I am afraid of blocking it by making its so is it 100% safe to do so? AND can I have a guide?
yeah its safe until you do it properly.
Use Odin Latest version.
Turn Phone into download mode.
connect to pc using Odin.
Add required files into Odin and hit start. Thats it.
i just updated my T mobile G935T to G935U now and its working fine.
here is download link for firmware.
shahab172 said:
yeah its safe until you do it properly.
Use Odin Latest version.
Turn Phone into download mode.
connect to pc using Odin.
Add required files into Odin and hit start. Thats it.
i just updated my T mobile G935T to G935U now and its working fine.
here is download link for firmware.
Click to expand...
Click to collapse
can you share the download link.
I found a list of firmwares here https://www.sammobile.com/samsung/galaxy-s7-edge/firmware/#SM-G935U
Not sure which one is the right one
Just Flashed Latest G935U firmware on my G935T.
Got rid of that Tmobile logo and bloatwares. Everything is working awesome. Faster than ever.
Steps I followed:
Downloaded Latest G935U firmware from Samfrew with TMO CSC.
Flashed AP, CP, CSC (not BL).
Device rebooted and performed a factory reset. Set CSC according to my simcard and finally booted in no time.
All of these took around 15 minutes.
PS
My device was on latest G935T firmware before.
Its carrier unlocked.
Sent from my SM-G935U using Tapatalk
Hello,
Samsung Galaxy S7 Edge Tmobile - Unlocked (Came with T mobile bloatware)
I had bought SM-G935T unlocked, I was using it with Lycamobile and I wasn't getting proper reception. I played around with ODIN and installed SM-G935U then SM-G935T again but this time, I updated to 8.0.
After flashing, I cannot make phone calls, cannot receive phone calls, cannot use LTE or mobile data network. Tried with other sim cards but nothing works. Wifi and Bluetooth works fine, everything else works fine in the phone.
Can someone help?
Phone information:
Android Version: 8.0
Samsung Experience: 9.0
Baseband: G935TUVS9CSB2
Build Number: R16NW.G935TUVS9CSB2
SE for Android Status:
Enforcing
SEPF_SM-G935T_8.0.0_0017
KNOX version
Knox 3.1
Knox API level 25
TIMA 3.3.0
If you guys need any more information please let me know I can provide.
Thank you in advance.
check your IMEI, you probably messed it up. hope you have EFS backup
yaro666 said:
check your IMEI, you probably messed it up. hope you have EFS backup
Click to expand...
Click to collapse
IMEI is visible. No, I don't have EFS backup.
omgitzgandhi said:
IMEI is visible. No, I don't have EFS backup.
Click to expand...
Click to collapse
its probably the CSC. When youre flashing the tar.md5 file, i assume you didnt flash the CSC, correct?
youdoofus said:
its probably the CSC. When youre flashing the tar.md5 file, i assume you didnt flash the CSC, correct?
Click to expand...
Click to collapse
I flashed everything a couple of times.
even Home CSC and CSC (nonhome)
Took it to Samsung customer care, they flashed it a couple of times too.
Still no Network (no calls - outgoing/incoming and no Mobile internet), However sim gets recognised - ATT, Tmobile, lyca, Ultramobile
omgitzgandhi said:
I flashed everything a couple of times.
even Home CSC and CSC (nonhome)
Took it to Samsung customer care, they flashed it a couple of times too.
Still no Network (no calls - outgoing/incoming and no Mobile internet), However sim gets recognised - ATT, Tmobile, lyca, Ultramobile
Click to expand...
Click to collapse
try a new tarball from sammobile.com.
youdoofus said:
try a new tarball from sammobile.com.
Click to expand...
Click to collapse
I have installed this: https://www.sammobile.com/firmwares/galaxy-s7-edge/SM-G935T/TMB/download/G935TUVS9CSB2/259292/
Still not working.
omgitzgandhi said:
I have installed this: https://www.sammobile.com/firmwares/galaxy-s7-edge/SM-G935T/TMB/download/G935TUVS9CSB2/259292/
Still not working.
Click to expand...
Click to collapse
there are 4 other versions on sammobile that are still android 8.0 and since its a 935t, you can also use the 935f firmware. youre nowhere near being out of options
youdoofus said:
there are 4 other versions on sammobile that are still android 8.0 and since its a 935t, you can also use the 935f firmware. youre nowhere near being out of options
Click to expand...
Click to collapse
So what should I do? I think when the phone came it was SM-G935(F).
Should I Install Latest Sm-G935F?
Or if its something else, can you share link?
omgitzgandhi said:
So what should I do? I think when the phone came it was SM-G935(F).
Should I Install Latest Sm-G935F?
Or if its something else, can you share link?
Click to expand...
Click to collapse
if the hardware id a G935F, then flash the most current G935F firmware on it, factory reset in recovery afterwards, profit, go have a sammich because you fixed your phone make sure you do this in exactly this order, the last two are optional, but recommended
youdoofus said:
if the hardware id a G935F, then flash the most current G935F firmware on it, factory reset in recovery afterwards, profit, go have a sammich because you fixed your phone make sure you do this in exactly this order, the last two are optional, but recommended
Click to expand...
Click to collapse
I will do this and let you know. Thank you.
omgitzgandhi said:
I will do this and let you know. Thank you.
Click to expand...
Click to collapse
right on. also let me know what kind of sammich you make. i like sammiches
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
omgitzgandhi said:
Hello,
Samsung Galaxy S7 Edge Tmobile - Unlocked (Came with T mobile bloatware)
I had bought SM-G935T unlocked, I was using it with Lycamobile and I wasn't getting proper reception. I played around with ODIN and installed SM-G935U then SM-G935T again but this time, I updated to 8.0.
After flashing, I cannot make phone calls, cannot receive phone calls, cannot use LTE or mobile data network. Tried with other sim cards but nothing works. Wifi and Bluetooth works fine, everything else works fine in the phone.
Can someone help?
Phone information:
Android Version: 8.0
Samsung Experience: 9.0
Baseband: G935TUVS9CSB2
Build Number: R16NW.G935TUVS9CSB2
SE for Android Status:
Enforcing
SEPF_SM-G935T_8.0.0_0017
KNOX version
Knox 3.1
Knox API level 25
TIMA 3.3.0
If you guys need any more information please let me know I can provide.
Thank you in advance.
Click to expand...
Click to collapse
https://gsmhungvu.com/samsung-g935fd-firmnware-file-android-oreo-8-0/
gupt07ash said:
https://gsmhungvu.com/samsung-g935fd-firmnware-file-android-oreo-8-0/
Click to expand...
Click to collapse
This says Sm-g935FD,
will this work for my Sm-G935F? (Not FD)
omgitzgandhi said:
This says Sm-g935FD,
will this work for my Sm-G935F? (Not FD)
Click to expand...
Click to collapse
It will
omgitzgandhi said:
This says Sm-g935FD,
will this work for my Sm-G935F? (Not FD)
Click to expand...
Click to collapse
you can flash any G935 firmware to any G935 device and it will boot as long as the kernel is written for the type of processor you have in your device. If its a snapdragon, any snapdragon G935 tar.md5 will work and boot, likewise with the xynos based tar.md5's. Ive flashed a G935f on a G935V before and it worked fine
I haven't seen this listed anywhere since a search for this model number brings up nothing.
The Australian stock is the model SM-G977B
Its an Exynos version with the old UFS and the model given as part of the free upgrade promo (when you preordered the s10 plus), is a 512GB black variant.
I can't see much development being done for this since obviously no one has this model, but I'd love to be able to root it.
Hopefully more people will get this phone, and some dev can start. If there's anything I can do to get the ball rolling, let me know!
Root
Hey mate, I have already achieved root day one of receiving my device from this offer , I am by no means an advanced developer but technology is my passion. The process was simple due to it being the same process as topjohnwu already published. This is the official page for the instructions by topjohnwu which do work: topjohnwu.github.io/Magisk/install.html#samsung-system-as-root. If you struggle at any point feel free to reply. I will be posting this in the development threat for others so there aware.
As for TWRP, thats a different story, I have tried flashing TWRP from the s10+ and hoping it would work but it did not which was to be expected. So I am attempting my own build of TWRP by modifying the s10+ TWRP to match the s10 5G. Mind you I have never compiled TWRP or Android. I have mainly tinkered with iOS on apples hardware so no promises I'll figure it out nor that it will be bug-free but if I do manage to find it I'll post it for another developer to maybe check and fix.
But root is definitely possible as of now,
Happy rooting!.
Hwy thanks for that.
Do you still get updates? I've never rooted without a custom rom before?
Also, do you use exposed? Edexposed or virtual exposed? It's the main reason I want to root
Lastly where did u get the boot image from?
Thanks
Hey mate, over the air updates I believe do not work. To update you'd need to download the latest firmware and repatch the ap file. But I haven't done this. There is a forum post somewhere outlining the process though so I'll try and dig that up.
As for the exposed framework I haven't tested that out nor have I used it before but it is something I wanna dive into. The last time I tinkered with Android was years ago where exposed wasn't a big thing. But I have seen users state they've got it running from edxposed or something like that from the magisk add on panel. So I'll give it a try now and report back to you.
As for the firmware I cannot upload any links as I'm a new user. But if you shoot me an email [email protected] I'll be happy to send you the link I personally used.
hello
about G977BOXM firmwares with TEL CSC by default
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
last firmware i've found is G977BXXU1ASE7 :
https://samsung-firmware.org/download/firmware-sm-g977b-tel/Chgpi/TEL/G977BXXU1ASE7/G977BOXM1ASE8/
about boot :
a new firmware exist : G977BXXU1ASEC G977BOXM1ASEC with same boot file
regards
Is this ROM branded by network?
yes with TEL CSC you have only préconfiguration for Telstra
regards
yakapa40 said:
yes with TEL CSC you have only préconfiguration for Telstra
regards
Click to expand...
Click to collapse
Can you paste what CSC are included please?
Hi, i use G977N. Can I flash rom of G977B?
Do you ask for support?
duchoapnpd said:
Hi, i use G977N. Can I flash rom of G977B?
Click to expand...
Click to collapse
Do you ask for support?
HAN216256 said:
Do you ask for support?
Click to expand...
Click to collapse
Yes, i want flash this rom odin to G977N
duchoapnpd said:
Yes, i want flash this rom odin to G977N
Click to expand...
Click to collapse
I want to flash the N version to Eu version lol
Can someone download Phone INFO app into their 5Gs and post what CSCs are available? Thanks.
To all who need support feel free to message me privately and ill gladly help ?
Can an fully paid version work outside Australia or does it need activation first inside Australia on Telstra network
DrearierJester1 said:
Can someone download Phone INFO app into their 5Gs and post what CSCs are available? Thanks.
Click to expand...
Click to collapse
Product Code:
SM-G977BZSATEL
Original CSC Code:
Firmware's CSC Code:
TEL
Active CSC Code:
TEL
Available CSC Codes:
single/AUT; CPW, DBT, SWC, TEL
CSC Country:
Australia / AU
Mobile Operator:
Telstra / 50501
There is the latest update available for Telstra model fyi