Hi Guys, i flashed 3 official roms for the s8+ including PHN Rom but it's all the same , always back to my regional CSC code which is XSG....
all the files are the same size and all of them are identical, i think it's only one file and they just change the name of it, please try and let me know if im doing something wrong because so far no luck at all changing the CSC code or even the normal Apps that comes with each Region ..
also i noticed that after flashing by odin the blue screen is always 32% and then it restarts
Have you tried a factory reset after you flashed? Sometimes it is required to have the CSC change on a new firmware.
clubtech said:
Have you tried a factory reset after you flashed? Sometimes it is required to have the CSC change on a new firmware.
Click to expand...
Click to collapse
I tried that as well but it's not working if anyone was able to do the csc change please let me know.
demmo81 said:
Hi Guys, i flashed 3 official roms for the s8+ including PHN Rom but it's all the same , always back to my regional CSC code which is XSG....
all the files are the same size and all of them are identical, i think it's only one file and they just change the name of it, please try and let me know if im doing something wrong because so far no luck at all changing the CSC code or even the normal Apps that comes with each Region ..
also i noticed that after flashing by odin the blue screen is always 32% and then it restarts
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The European model of the S8/S8+ (SM-G950F + SM-G955F) will get a Multi-CSC -> OXM
This Multi-CSC was already used in the Note 7, and will now be continued on the S8/S8+
This Multi-CSC has the following CSC's included:
AFR ATO AUT BGL BTU CHO DBT ETL EUR ILO ITV LUX MAT MID MWD NEE ORX PCL PHE PHN PTR ROM SEB SEE TEB TPA TPH TTT TUR XEF XEH XEO XEU XFA XFE XSG
With other words: If you want to change your XSG-CSC to one of the above, it's NOT POSSIBLE anymore!
henklbr said:
The European model of the S8/S8+ (SM-G950F + SM-G955F) will get a Multi-CSC -> OXM
This Multi-CSC was already used in the Note 7, and will now be continued on the S8/S8+
This Multi-CSC has the following CSC's included:
AFR ATO AUT BGL BTU CHO DBT ETL EUR ILO ITV LUX MAT MID MWD NEE ORX PCL PHE PHN PTR ROM SEB SEE TEB TPA TPH TTT TUR XEF XEH XEO XEU XFA XFE XSG
With other words: If you want to change your XSG-CSC to one of the above, it's NOT POSSIBLE anymore!
Click to expand...
Click to collapse
Do you know if we can flash CSC_Home from another model ? i get SM-G955N, do you think i can flash CSC from 955F ? ^^
henklbr said:
The European model of the S8/S8+ (SM-G950F + SM-G955F) will get a Multi-CSC -> OXM
This Multi-CSC was already used in the Note 7, and will now be continued on the S8/S8+
This Multi-CSC has the following CSC's included:
AFR ATO AUT BGL BTU CHO DBT ETL EUR ILO ITV LUX MAT MID MWD NEE ORX PCL PHE PHN PTR ROM SEB SEE TEB TPA TPH TTT TUR XEF XEH XEO XEU XFA XFE XSG
With other words: If you want to change your XSG-CSC to one of the above, it's NOT POSSIBLE anymore!
Click to expand...
Click to collapse
so i cant flash any other rom than mine?
i cant use the PHN or BTU ?
this is strange and actually ****ed up as the middle east Roms doesn't work like the European ones as my experience with the S7 Edge
androidrouen said:
Do you know if we can flash CSC_Home from another model ? i get SM-G955N, do you think i can flash CSC from 955F ? ^^
Click to expand...
Click to collapse
You can only flash G955N firmware, NOT G955F firmware!
---------- Post added at 10:56 AM ---------- Previous post was at 10:54 AM ----------
demmo81 said:
so i cant flash any other rom than mine?
i cant use the PHN or BTU ?
this is strange and actually ****ed up as the middle east Roms doesn't work like the European ones as my experience with the S7 Edge
Click to expand...
Click to collapse
Yes you can:
If firmware of one in the Multi-CSC OXM mentioned CSC's is released earlier then for your XSG model, you can flash that firmware too (all firmwares are the same for the CSC's in OXM)
henklbr said:
You can only flash G955N firmware, NOT G955F firmware!
Click to expand...
Click to collapse
On the GS7, it was possible to flash G935U firmware on at&t G935A ,
do you think there is really a software difference between different 955N (6gb and 4gb Ram) ?
It doesn't seem there is software difference between 6gb ram and 4gb ram, at least model numbers seems the same : 955NZKE is 128gb in dark (ZKE is dark), 955NZVA is 64gb in violet (ZVA is violet) and G955NZBA is 64gb in blue (ZBA is blue),
Does i miss something important ? ^^
Thanks
henklbr said:
You can only flash G955N firmware, NOT G955F firmware!
---------- Post added at 10:56 AM ---------- Previous post was at 10:54 AM ----------
Yes you can:
If firmware of one in the Multi-CSC OXM mentioned CSC's is released earlier then for your XSG model, you can flash that firmware too (all firmwares are the same for the CSC's in OXM)
Click to expand...
Click to collapse
I'm sorry man I didn't get it actually. I have the PHN and the BTU roms I flash them and still the csc code is xsg
Now if I download the TUR Rom which has in it's home csc code XSG also it will work ?
Till now I didn't see the csc XSG Rom out but I know the home csc file for the TUR includes XSG
androidrouen said:
On the GS7, it was possible to flash G935U firmware on at&t G935A ,
do you think there is really a software difference between different 955N (6gb and 4gb Ram) ?
It doesn't seem there is software difference between 6gb ram and 4gb ram, at least model numbers seems the same : 955NZKE is 128gb in dark (ZKE is dark), 955NZVA is 64gb in violet (ZVA is violet) and G955NZBA is 64gb in blue (ZBA is blue),
Does i miss something important ? ^^
Thanks
Click to expand...
Click to collapse
I can't give you an answer in this one...
---------- Post added at 11:35 AM ---------- Previous post was at 11:34 AM ----------
demmo81 said:
I'm sorry man I didn't get it actually. I have the PHN and the BTU roms I flash them and still the csc code is xsg
Now if I download the TUR Rom which has in it's home csc code XSG also it will work ?
Till now I didn't see the csc XSG Rom out but I know the home csc file for the TUR includes XSG
Click to expand...
Click to collapse
If you flash ROM's with the Multi-CSC OXM, your CSC will stay XSG
henklbr said:
I can't give you an answer in this one...
---------- Post added at 11:35 AM ---------- Previous post was at 11:34 AM ----------
If you flash ROM's with the Multi-CSC OXM, your CSC will stay XSG
Click to expand...
Click to collapse
Thanks man
There is no way to know before downloading ?
demmo81 said:
Thanks man
There is no way to know before downloading ?
Click to expand...
Click to collapse
Follow my thread for updates (and stay ON-topic there):
https://forum.xda-developers.com/galaxy-s8+/how-to/official-stock-firmware-update-odin-t3582175
Related
Here are some CSC zips to flash from custom recovery. (I use TWRP)
Seems the single CSC zip is a winner.
Please do not pm me about the zips, ask here in the thread, keeps the thread alive
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Heres a little how to:
What you need
Android Kitchen by dsixa Link
DiskInternals Linux Reader Link
*In Android Kitchen by dsixda
-Advanced option
-Option 18
-Option 3
-Follow instructions
-Now go to this guide.
[HOWTO] Change CSC region code without losing data
I have uploaded a template that you can use. if you like, or copy to your ROM.
Feel free to upload CSC zips that you make
Or get a pre made.
Find them here --> LINK My_File_Stash/Galaxy_S3/CSC/
CSC.Template.PFS.zip has:
updater-script Link pastebin
A modded feature.xml unlocks some small stuff Link pastebin
Apks that comes with cache.img (VideoHub.apk,SSuggest.apk,MusicHub_30.apk,Flipboard.apk)
Remove apks before you flash if you dont use them.
Well link to the guide is above
Click to expand...
Click to collapse
Thx to hsimonics for the idea about single CSC zips
Single:
-----------------------------------------------------------------------------------------
CSC.LUX.Single.PFS.zip
CSC.PHN.Single.PFS.zip
CSC.ITV.Single.PFS.zip
CSC.DBT.Single.PFS.zip
CSC.ORS.single.PFS.zip
CSC_H3GDLJ1.PFS.zip
Multi:
-----------------------------------------------------------------------------------------
CSC.BTU.zip has:
BTU.CPW.DBT.ITV.KOR.XEF.XEO
Click to expand...
Click to collapse
CSC.OXF.ORS.zip has:
ALB CMF CYO ERO MSR ORS SEE TOP TSR VIM XEH XEZ
BGL COA CYV EUR ORL SEB TMT TRA TWO VVT XEO XSK
Click to expand...
Click to collapse
CSC.XEO.zip has:
ALB.BGL.CMF.COA.CYO.ERO.MSR.ORL.ORS.SEB.SEE.TMT.TOP.TRA.TSR.TWO.VDH.VIM.VVT.XEH.XEO.XEZ.XSK
Click to expand...
Click to collapse
CSC.Super.Multi.124.zip has:
Credit to wanam for the CSC folders, thx
ABS BTC CYO ETR ITV MED MSR ORS SEB SWC TMT VD2 VGR XEF XFM XTE
AFG BTU CYV EUR JED MET MTL ORX SEE TCL TOP VDC VIM XEH XFV XXV
AFR CEL DBT FWD KEN MID MWD PAK SFR TDR TRA VDF VIP XEO XME ZTO
ALB CHU ECT GLB KOR MIR NEE PCL SIM TGY TSR VDH VNO XEV XSE
ARB CMF EGY H3G KSA MM1 NPL PHE SIN THL TTT VDI VOD XEZ XSG
ATL CNX EIR ILO LUX MMC OMN PRO SLK THR TUN VDP VOP XFA XSK
BGL COA ERO INS LYS MOB OPS PTR SMA TMC TUR VDR VVT XFC XSP
BRI CPW ETL INU MAT MRT ORL QAT STH TML TWO VDS WAN XFE XTC
Click to expand...
Click to collapse
I can make more zips, just upload the cache.img with your CSC to filecloud.io
Thanks buddy!
Added this to the video DESCRIPTION overview/flashing guide/triangle away testing video!
WARNING CHANGING CSC WILL DO A FACTORY RESET!
You now have 3 Options
1. Use this app that hotsync100 made for us. See this thread <-------- Click me
All credit for the app goes to hotsync100<--Link
2. Manually read below.
3. Or use this app that bassie1995 made Link <--------
So I found out how to change the CSC on LLA fw.
Here you can find CSC zips to flash in custom recovery Link <-- Click
What you need:
*Some knowlege about adb or Terminal Emulator
*adb
*rooted phone
*Also you need backups, if using stock recovery you will wipe all so save your backups on PC
How to:
1. Open a terminal on PC (or use Terminal Emulator app from play store)
2. Type : adb shell (skip no.3 if you use Terminal Emulator on phone)
3. su
4. am start -a android.intent.action.MAIN -n com.android.Preconfig/com.android.Preconfig.Preconfig
5. Choose your CSC, will take 3sec for the phone to reboot
6. Restore your backups
7. Optionally un-root.
As you can see I did not put so much time in this OP, if anything is unclear pls google and search XDA before asking
Source and credit:
http://sampro.pl
pepi1234
LINK <- click
Perka said:
pls post the vid when done
EDIT: ah ok in Description
Click to expand...
Click to collapse
Yup unfortunately you made this after the video was rendered
And here's the video!
didn't get the step 2
where to open terminal ?
computer or phone ?
XeactorZ said:
didn't get the step 2
where to open terminal ?
computer or phone ?
Click to expand...
Click to collapse
You choose
EDIT: OP updated
Perka said:
You choose
EDIT: OP updated
Click to expand...
Click to collapse
maybe just worth adding in there, or affirming that CSC INSTALL will cause a full factory reset of the phone. (i know you already mentioned backing up, but still people might not get it)
TotallydubbedHD said:
maybe just worth adding in there, or affirming that CSC INSTALL will cause a full factory reset of the phone. (i know you already mentioned backing up, but still people might not get it)
Click to expand...
Click to collapse
Hi, I change the csc,, xez, if the rom contains?, Or I have to flash via odin your file.
misacek said:
Hi, I change the csc,, xez, if the rom contains?, Or I have to flash via odin your file.
Click to expand...
Click to collapse
Check if you have it in your rom, if not you need this cache.img from this fw
I9300XXBLH1 I9300XXLH1 I9300OXFBLH1 08.2012 XEZ Czech
http://sampro.pl/firmware/android/samsung-i9300/
If you upload the cache.img I can make a tar
I,, xez, thank you anyway.
Hi Perka! Which country is the KOR csc for? I couldn't find it in the list you provided link to.
rmsa786 said:
Hi Perka! Which country is the KOR csc for? I couldn't find it in the list you provided link to.
Click to expand...
Click to collapse
KOR is Korea
CWM 6.0.1.2 refuses to flash this, it says the signature failed, but once you change it and try again, no dice
Kryten2k35 said:
CWM 6.0.1.2 refuses to flash this, it says the signature failed, but once you change it and try again, no dice
Click to expand...
Click to collapse
Yea nobody told you to flash in CWM
Odin Pc
Perka said:
KOR is Korea
Click to expand...
Click to collapse
Ever since I've had this phone it has been on KOR. I got it through T-Mobile (aka EE) UK. I'm thinking of changing the csc to BTU, do you think it's needed?
rmsa786 said:
Ever since I've had this phone it has been on KOR. I got it through T-Mobile (aka EE) UK. I'm thinking of changing the csc to BTU, do you think it's needed?
Click to expand...
Click to collapse
No not really, but many seems to want their regions CSC, personally IDK, for a long time I did not have a CSC
I just put this out so that the ones who want their CSC can
Perka said:
Yea nobody told you to flash in CWM
Odin Pc
Click to expand...
Click to collapse
...Yeah, but you flash in Odin, in Download Mode, it pushes the files to the recovery, which is CWM in my case.
I tried using a stock recovery, and that works, and flashes fine, but I've just changed the CSC using the instructions above and I'm still on XOR.
I'm trying to change CSC to get HD-Voice.
Kryten2k35 said:
...Yeah, but you flash in Odin, in Download Mode, it pushes the files to the recovery, which is CWM in my case.
I tried using a stock recovery, and that works, and flashes fine, but I've just changed the CSC using the instructions above and I'm still on XOR.
I'm trying to change CSC to get HD-Voice.
Click to expand...
Click to collapse
Dont know what you did wrong, I tried 4 times changing CSC and it works.
EDIT: did u extract the zip from cache.img? I tried that and it dont work.
Perka said:
Dont know what you did wrong, I tried 4 times changing CSC and it works.
EDIT: did u extract the zip from cache.img? I tried that and it dont work.
Click to expand...
Click to collapse
I flashed the .tar from your stash ("CSC.XXELLA.BTU.CPW.DBT.ITV.KOR.XEF.XEO.tar") in Odin.
I'm on Wanam's deodexed, though, not entirely stock.
hi all, i got note 3 16gb SM-N9005 (ssn -N9005GSMH ) after i flashed Galaxy-S5_Stock-ROM-by_Jamal2367-Final_v10.0 my phone has failed to reboot. So i did tried a lot of methods that i found on Xda that include flashing difference stock from samsmobile: N9005XXUENC2_N9005ETLENB1_ETL; N9005XXUFNF4_N9005OXAFNF4_BTU; TGY-N9005ZHUBMI7-20130926192530; N9005XXUGNG1_N9005OXXGNG1_XEH. Also method from Technology: The Ultimate Guide To Unbrick 16 Gb International Samsung Galaxy Note 3 (SM-N9005) And Upgrade To KitKat 4.4.2 Through Custom ROM did not work on my phone too. very frustrated and tired. So please help me get through this!! THanks all:crying:
First remove your s/n...it s not safe..after there is so many posts about that....it s a modem problem....are the room you flashed good for 16 Go? ?? Maybe you corrupt your pit file....
haitichtran said:
hi all, i got note 3 16gb SM-N9005 (ssn -N9005GSMH s/n RF8F60DQT5X) after i flashed Galaxy-S5_Stock-ROM-by_Jamal2367-Final_v10.0 my phone has failed to reboot. So i did tried a lot of methods that i found on Xda that include flashing difference stock from samsmobile: N9005XXUENC2_N9005ETLENB1_ETL; N9005XXUFNF4_N9005OXAFNF4_BTU; TGY-N9005ZHUBMI7-20130926192530; N9005XXUGNG1_N9005OXXGNG1_XEH. Also method from Technology: The Ultimate Guide To Unbrick 16 Gb International Samsung Galaxy Note 3 (SM-N9005) And Upgrade To KitKat 4.4.2 Through Custom ROM did not work on my phone too. very frustrated and tired. So please help me get through this!! THanks all:crying:
Click to expand...
Click to collapse
As your phone is 16GB, your CSC may be TGY or BRI. It means you cannot flash firmware from another 32GB N9005.
Can you show your CSC info?
(install Phone INFO ★Samsung★ app and look in the CSC INFO section)
re
rayman95 said:
First remove your s/n...it s not safe..after there is so many posts about that....it s a modem problem....are the room you flashed good for 16 Go? ?? Maybe you corrupt your pit file....
Click to expand...
Click to collapse
i did it with this: HLTE_HKTW_OPEN_16G.pit and
re
vndnguyen said:
As your phone is 16GB, your CSC may be TGY or BRI. It means you cannot flash firmware from another 32GB N9005.
Can you show your CSC info?
i tried to upload but error twice. can i send you by mail??
Original csc code: XSA
firmware: TGY
active TGY
Country HK
Click to expand...
Click to collapse
haitichtran said:
vndnguyen said:
As your phone is 16GB, your CSC may be TGY or BRI. It means you cannot flash firmware from another 32GB N9005.
Can you show your CSC info?
i tried to upload but error twice. can i send you by mail??
Original csc code: XSA
firmware: TGY
active TGY
Country HK
Click to expand...
Click to collapse
Ok, your original CSC is XSA (International Note 3) but you flashed the TGY firmware (Hong Kong firmware, that is not compatible with international Note 3 model).
So you have messed up with the PIT.
Try to flash XSA firmware together with the right PIT file (international PIT, not HK 16GB PIT file)
Click to expand...
Click to collapse
so much thanks
vndnguyen said:
haitichtran said:
Ok, your original CSC is XSA (International Note 3) but you flashed the TGY firmware (Hong Kong firmware, that is not compatible with international Note 3 model).
So you have messed up with the PIT.
Try to flash XSA firmware together with the right PIT (international PIT, not TGY 16GB PIT)
Click to expand...
Click to collapse
please show me the link. so whick one i need to download and from where. because i tried a lot of source and now donot know from where i got the whole bunch of 5 files : PIT; BL; AP; CP and CSC. Also can i use odin 3.09 instead 3.07??
also i found this:
Build date: Wed, 28 May 2014 08:59:36 +0000
Product Code: XSA
PDA: N9005XXUENE3
CSC: N9005XSAENE1
MODEM: N9005XXUENE3
i downloading now but where i should found the rest of the files?? Please help me. thanks
Click to expand...
Click to collapse
I did flash N9005XXUENE3_N9005XSAENE1_XSA but it failed. i think because I was messed up with the reparition. Couldnot find any PIT, BL, Cp, CSC on google. Please help
please help me out!!!
vndnguyen said:
haitichtran said:
Ok, your original CSC is XSA (International Note 3) but you flashed the TGY firmware (Hong Kong firmware, that is not compatible with international Note 3 model).
So you have messed up with the PIT.
Try to flash XSA firmware together with the right PIT file (international PIT, not HK 16GB PIT file)
Click to expand...
Click to collapse
I did try with this N9005_HLTE_EUR_OPEN_32G.pit still it wasnot back to recognize the 32gb?? also this is some picture of my csc info:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks, :crying:looking forward from you!!
Click to expand...
Click to collapse
about bootloader!!
this is my bootloader screen!!
I case you didn't hear about this!
Here is the article on SamMobile: https://www.sammobile.com/2017/10/26/galaxy-s8-oreo-beta-program-may-go-live-us-october-31/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Really?
Let's see
Well it is always speculation with firmware updates and Samsung until we actually get an update.
tecksulfur said:
I case you didn't hear about this!
Here is the article on SamMobile: https://www.sammobile.com/2017/10/26/galaxy-s8-oreo-beta-program-may-go-live-us-october-31/
Click to expand...
Click to collapse
Sammobile is not opening for me since yesterday using Samsung internet
Laleka said:
Sammobile is not opening for me since yesterday using Samsung internet
Click to expand...
Click to collapse
Working just fine, maybe it's your DNS, or cache? ( I use Samsung Internet Beta )
tecksulfur said:
I case you didn't hear about this!
Here is the article on SamMobile: https://www.sammobile.com/2017/10/26/galaxy-s8-oreo-beta-program-may-go-live-us-october-31/
Click to expand...
Click to collapse
Correct, and it will be also available for United Kingdom & Korea; date is not confirmed yet...
In the 2nd phase, registering will also be opened for Germany, Spain, France, Poland, India & China
More info will be revealed by Samsung this week...
Source: Galaxy S8 Oreo beta program will go live in these countries
@Dejan Kruljac : the only thing FAKE is your post, AND the person you admire on the GIF
I'm currently running the EE firmware on the international version. I assume the beta will only be available for the unlocked variant (BTU/XEU CSC. Therefore I want to be prepared in advance. Can I just download the latest BTU or XEU firmware from Sam Mobile and then I will be eligible for the beta program? After looking through the various firmware threads, there seems to be conflicting reports about how to flash a rom which will permanently change the CSC. Will flashing the BTU or XEU firmware suffice? I've also seen people have success with flashing a multi csc rom and change the csc via the (old samsung method) dialer method using the imei number - which will also reset the device. Can anyone confirm the current method?
Thanks
redbullman said:
I'm currently running the EE firmware on the international version. I assume the beta will only be available for the unlocked variant (BTU/XEU CSC. Therefore I want to be prepared in advance. Can I just download the latest BTU or XEU firmware from Sam Mobile and then I will be eligible for the beta program? After looking through the various firmware threads, there seems to be conflicting reports about how to flash a rom which will permanently change the CSC. Will flashing the BTU or XEU firmware suffice? I've also seen people have success with flashing a multi csc rom and change the csc via the (old samsung method) dialer method using the imei number - which will also reset the device. Can anyone confirm the current method?
Thanks
Click to expand...
Click to collapse
You can't permachange CSC by flashing one, the final CSC is hard coded at a lower level on non-flashed storage that would require root to adjust (but you could unroot right after) and a fairly comprehensive understanding of tw
partcyborg said:
You can't permachange CSC by flashing one, the final CSC is hard coded at a lower level on non-flashed storage that would require root to adjust (but you could unroot right after) and a fairly comprehensive understanding of tw
Click to expand...
Click to collapse
Thanks. I yesterday flashed the latest October security update Samsung rom with oxm csc. The csc has now changed to xeu, which is one of the 2 unlocked carrier free cscs in the UK so I'm happy. All ready for the oreo beta now!
Hello, Which one exactly did you flash? and where can i download it?
---------- Post added at 06:23 PM ---------- Previous post was at 06:21 PM ----------
redbullman said:
Thanks. I yesterday flashed the latest October security update Samsung rom with oxm csc. The csc has now changed to xeu, which is one of the 2 unlocked carrier free cscs in the UK so I'm happy. All ready for the oreo beta now!
Click to expand...
Click to collapse
Can you please specify which firmware you flashed? Which country ...? or can you post the link to download it?
31 october 2018 i think
As 2017 nothing comes at it
redbullman said:
Thanks. I yesterday flashed the latest October security update Samsung rom with oxm csc. The csc has now changed to xeu, which is one of the 2 unlocked carrier free cscs in the UK so I'm happy. All ready for the oreo beta now!
Click to expand...
Click to collapse
You get it only, when "Software Serviceprovider" (in Version info) shows:
XEU/XEU/*** (where *** is the product-code of your device which you can't change!)
---------- Post added at 08:15 PM ---------- Previous post was at 08:12 PM ----------
phil.asmar said:
Hello, Which one exactly did you flash? and where can i download it?
---------- Post added at 06:23 PM ---------- Previous post was at 06:21 PM ----------
Can you please specify which firmware you flashed? Which country ...? or can you post the link to download it?
Click to expand...
Click to collapse
XEU is part of the Multi-CSC OXM (which all unbranded Europeans phones have)...
If you DON'T have a UK-SIM card, you CAN'T change your phone to XEU! A UK-SIM card must be in your device, reset it, and your CSC will change to XEU/XEU/*** (where *** is the product-code of your device)
henklbr said:
You get it only, when "Software Serviceprovider" (in Version info) shows:
XEU/XEU/*** (where *** is the product-code of your device which you can't change!)
Do you know that for sure? Because changing csc works for normal ota updates. Why would it not work for the oreo beta? Makes no sense.
My csc is now xeu/xeu/evr. You sure I won't get It? You're the first person to suggest amending the csc won't work with the oreo beta.
Click to expand...
Click to collapse
redbullman said:
henklbr said:
You get it only, when "Software Serviceprovider" (in Version info) shows:
XEU/XEU/*** (where *** is the product-code of your device which you can't change!)
Do you know that for sure? Because changing csc works for normal ota updates. Why would it not work for the oreo beta? Makes no sense.
My csc is now xeu/xeu/evr. You sure I won't get It? You're the first person to suggest amending the csc won't work with the oreo beta.
Click to expand...
Click to collapse
You will get it, because the 1st 2 are the same; the last one, EVR, can't be changed because that's your Product-code
With XEU/XEU/EVR you WILL receive XEU-updates
Click to expand...
Click to collapse
henklbr said:
redbullman said:
You will get it, because the 1st 2 are the same; the last one, EVR, can't be changed because that's your Product-code
With XEU/XEU/EVR you WILL receive XEU-updates
Click to expand...
Click to collapse
Great thanks!
Click to expand...
Click to collapse
G985F firmwares download link :
https://www.samfw.com/firmware/SM-G985F
if you want to keep OTA updates , download only firmware for your CSC
- download mode : ( service manual )
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
other méthod :
https://forum.xda-developers.com/showpost.php?p=81970017&postcount=9
- ODIN : V3.14.4
update : flash AP + BL + CP + HOME_CSC
reset : save your data , flash AP + BL + CP + CSC
- device version:
on dialer : *#1234# or *#12580*369#
- Service provider SW ver :
go to :
setting/about phone/software information/Service provider SW ver
exemple :
XEF(active CSC)/XEF(sim1)/BGL(sim2)/EUX( EEA Europe)/BGL(originak CSC in Non Volatile memory )
-EUR Europe CSC and product code :
EUX : EEA ( European Economic Area )
EUY : none EEA
EUA : sold in United Kingdom , Greece
EUB : sold in Austria Belgium Germany France Spain Netherlands Portugal
EUC : sold in Switzerland
EUD : sold in Denmark Nordic countries Finland Latvia Sweden Lithuania
EUE : sold in Italy Poland Hungary Czechia Slovakia Bulgaria
EUF : sold in Albania Serbia Republic of North Macedonia
EUG : sold in Croatia Slovenia
edit1:
according Samsung community eu , for unbranded device
you will have in first EUX/EUX/EUX/EUX
after enabled wifi your device , a simple reboot for customising the CSC for your country
exemple : XEF/XEF/XEF/EUX/XEF
https://eu.community.samsung.com/t5...UX-vendu-sur-SAMSUNG-SHOP-FRANCE/td-p/1603571
free change CSC apk : https://forum.xda-developers.com/showpost.php?p=82858645&postcount=37
G985F OXM firmware:
https://www.samfw.com/firmware/SM-G985F
ver4
G985FXXS4ATGB-G985FOXM4ATGB
ver:3
G985FXXU3ATG4-G985FOXM3ATG9
G985FXXU3ATFG-G985FOXM3ATFG
ver:2
G985FXXS2ATE7-G985FOXM2ATE6
G985FXXU2ATE6-G985FOXM2ATE6
G985FXXS2ATD5-G985FOXM2ATD5
ver:1
G985FXXU1ATD3-G985FOXM1ATD3
G985FXXU1ATCT-G985FOXM1ATCT
G985FXXU1ATCH-G985FOXM1ATCH
G985FXXU1ATBM-G985FOXM1ATBM
G985F OXB purple edition BTS
ver3:
G985FXXU3ATFG-G985FOXB3ATFG
ver2:
G985FXXU2ATF5-G985FOXB2ATF6
G985F OWA firmware :
G985FXXU1ATCT-G985FOWA1ATCT
G985FXXU1ATB3-G985FOWA1ATB3
G985F OWE firmware :
G985FXXU1ATCT-G985FOWE1ATCT
G985FXXU1ATB3-G985FOWE1ATB3
G985F OWO firmware :
G985FXXU1ATB3-G985FOWO1ATB3
Current firmware is latest:
Model: SM-G985F
Version: G985FXXU1ATC1/G985FOXM1ATC1/G985FXXU1ATC1/G985FXXU1ATC1
Anything new? And this is not OXM?
nevermind...
Can I change the default csc from XEF to INU with out sim card?
@antenehnile
no without a sim card you can't change default CSC if yoyr device is not rooted
New firmware is out.
yakapa40 said:
@antenehnile
no without a sim card you can't change default CSC if yoyr device is not rooted
Click to expand...
Click to collapse
thank you
Changing rom ZTA to ZTO (Brasil) SM-G985F
Hi guys,
****** I changed the rom of my Galaxy S20 + SM-G985F from the carrier rom (ZTA) to the stock (ZTO) but the software version remains ZTA / ZTA / ZTA / ZTO / ZTA and the operator's blotwares continue. I don't know how to reverse this error. Can someone help me?
thanks
Thanks
Hi, can i flash this FW to my phone?
https://www.sammobile.com/samsung/g...e/SM-G985F/SER/download/G985FXXU1ATCT/329086/
I got S20 plus 4G,
@dazed1
i don't control sammobile firmwares ( they have too much errors ) so ask in their forum or you can download the firmware here :
https://www.samfw.com/firmware/SM-G985F/SER/G985FXXU1ATCT
regards
yakapa40 said:
@dazed1
i don't control sammobile firmwares ( they have too much errors ) so ask in their forum or you can download the firmware here :
https://www.samfw.com/firmware/SM-G985F/SER/G985FXXU1ATCT
regards
Click to expand...
Click to collapse
It was just an example. Can you give me any link that is suitable for my unit? thanks.
@dazed1
like it's written in post 2 SEE is part of OXM multi CSC , so yes , you can use the link in post 14 for your SEE device
regards
Rafael_Cury said:
Hi guys,
****** I changed the rom of my Galaxy S20 + SM-G985F from the carrier rom (ZTA) to the stock (ZTO) but the software version remains ZTA / ZTA / ZTA / ZTO / ZTA and the operator's blotwares continue. I don't know how to reverse this error. Can someone help me?
Click to expand...
Click to collapse
If you want to change Csc you can use Samkey tool
is root required?
yakapa40 said:
@dazed1
like it's written in post 2 SEE is part of OXM multi CSC , so yes , you can use the link in post 14 for your SEE device
regards
Click to expand...
Click to collapse
Can you give me your link for the rom of my S20 plus please? being out of the game long time, cant recall what did i need to match in order for the rom to match my unit, and Samfirmware is too slow.
@dazed1
i don't understand your problem :
if your device is SM-G985F SEE i've posted you a quick link
if not , go to :
setting/about phone/software information/Service provider SW ver
and post - Service provider SW ver :
regards
October update for Galaxy S20 in Germany
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
OTA Update file in 2nd post
OTA Update file .zip
S20 4G (Exynos)
https://1drv.ms/u/s!AsTbRa4bZd3nvlre97Seq1JQPRT7
Phidam__ said:
OTA Update file .zip
S20 4G Exynos
https://1drv.ms/u/s!AsTbRa4bZd3nvlre97Seq1JQPRT7
Click to expand...
Click to collapse
S20+ 985F? Do You have zip file?
Enviado desde mi SM-G985F mediante Tapatalk
Yeisonp said:
S20+ 985F? Do You have zip file?
Enviado desde mi SM-G985F mediante Tapatalk
Click to expand...
Click to collapse
No, I only have files for G980F
Phidam__ said:
October update for Galaxy S20 in Germany
OTA Update file in 2nd post
Click to expand...
Click to collapse
Wish someone like you does this for S20 Ultra G988B, since i have a limited quota internet, so saving 6GB would be very nice.
Hello. I could not flash through recovery. It says something Like "couldn't mount internal storage, installation aborted ".
Am I missing something? Is there any workaround?
And Yes, Im using G980F
Updated!! Thx man!
Atolael said:
Hello. I could not flash through recovery. It says something Like "couldn't mount internal storage, installation aborted ".
Am I missing something? Is there any workaround?
And Yes, Im using G980F
Click to expand...
Click to collapse
it is only for devices with CSC as DBT
Phidam__ said:
it is only for devices with CSC as DBT
Click to expand...
Click to collapse
I know that. I Flashed two days ago a completely New DBT firmware (using frija + odin). Aparently, I did something wrong... because I just checked my Phone and now it is XEF/XEF/XEF/ZTO (since im from Brazil).
I dont want to change The main subject of your thread, but I guess I should've removed The simcard before The flashing process, right?
Btw, Thanks for letting us know about The most recent updates
Atolael said:
I know that. I Flashed two days ago a completely New DBT firmware (using frija + odin). Aparently, I did something wrong... because I just checked my Phone and now it is XEF/XEF/XEF/ZTO (since im from Brazil).
I dont want to change The main subject of your thread, but I guess I should've removed The simcard before The flashing process, right?
Btw, Thanks for letting us know about The most recent updates
Click to expand...
Click to collapse
If it is DBT / XEF / XEF / ZTO then you can flash it
Phidam__ said:
If it is DBT / XEF / XEF / ZTO then you can flash it
Click to expand...
Click to collapse
All users with Sw-Serviceprovider OXM can flash this rom.
gee2012 said:
All users with Sw-Serviceprovider OXM can flash this rom.
Click to expand...
Click to collapse
Really ? I just know that ...
Phidam__ said:
Really ? I just know that ...
Click to expand...
Click to collapse
Yes, realy. OXM holds many CSC codes for Europe, Middle East etc.
List:
ACR AFG AFR ARO ATO AUT BGL BNG BRI BTC BTU CAC CAM CEL CHO COO DBT DKR ECT EGY EON ETL EUR GLB ILO INS ITV KSA LAO LUX LYS MID MM1 MWD MYM NEE NPL ORX PAK PCL PHE PHN PTR ROM SEB SEE SEK SER SFR SIN SKZ SLK SMA STH THL THR TMC TPA TPH TTT TUN TUR WTL XEF XEH XEO XEU XFA XFE XME XSG XSP XTC XXV ZTO.
gee2012 said:
Yes, realy. OXM holds many CSC codes for Europe, Middle East etc.
List:
ACR AFG AFR ARO ATO AUT BGL BNG BRI BTC BTU CAC CAM CEL CHO COO DBT DKR ECT EGY EON ETL EUR GLB ILO INS ITV KSA LAO LUX LYS MID MM1 MWD MYM NEE NPL ORX PAK PCL PHE PHN PTR ROM SEB SEE SEK SER SFR SIN SKZ SLK SMA STH THL THR TMC TPA TPH TTT TUN TUR WTL XEF XEH XEO XEU XFA XFE XME XSG XSP XTC XXV ZTO.
Click to expand...
Click to collapse
okay, thanks for your information
Phidam__ said:
okay, thanks for your information
Click to expand...
Click to collapse
Updated OXM list:
OXM multi CSC ( ACR AFG AFR ATO AUT BGL BNG BRI CAC CAM CAU CHO COO DBT DKR ECT EGY EON EUR ILO INS ITV KSA LAO LUX MID MWD MXO MYM NEE NPL ORX PAK PEO PHE PHN ROM SEB SEE SEK SKZ SLK SMP THL THR TPA TPH TTT TUN TUR XEF XEH XEO XEU XEZ XFE XME XSG XSP XTC XXV )
single : ( BTC BTU CPW DOO EMP GLB GTO LYS MAT MM1 NZC OPS SER SIN SIO SMA STH TEB TEL TMC TNZ VAU VNZ WTL XFA XFV XNZ XSA )
Flashed the update using Odin on my 980F with PHN.
All good :good:
gee2012 said:
All users with Sw-Serviceprovider OXM can flash this rom.
Click to expand...
Click to collapse
Good point. But Why I am unable to flash through recovery? (Unable to mount...)
Atolael said:
Good point. But Why I am unable to flash through recovery? (Unable to mount...)
Click to expand...
Click to collapse
Why don`t you use Odin to flash firmware in bootloader mode?
gee2012 said:
Why don`t you use Odin to flash firmware in bootloader mode?
Click to expand...
Click to collapse
You mean The entire firmware (DBT)? Because, As I stated before, I did download the DBT firmware using Frija and after The procedure (somehow) my Phone became XEF.
Today recrived september patch
S20+ 5g
One month before update