Database Users

Flashed wrong file

nicogri said:
There are plenty of them over the internet...
You can use this one for example :
http://forums.androidcentral.com/am...ide-samsung-how-flash-stock-rom-via-odin.html
You can found stock rom here :
http://www.sammobile.com/firmwares/database/GT-I9506/
And Samobile also provide same informations as the previous tutorial on the page when you select a firmware :
That's all you can't do easier...
If you downgrade you need to format after flashing the rom by doing HOME + POWER + Volume up to enter recovery and select factory reset and then Proceed
Click to expand...
Click to collapse
I'm really unsure of which version is for us in Sweden, there is a version for Tre Sweden but that is not the patriot æ operator she is using and then there is a Nordic version but doesn't fit with the following baseband name
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Okay so I tried to flash the Nordic file for kitkat and now the phone is stuck on boot up logo... Don't know which file to install. This is what it says on the box
I need help finding the correct file for kitkat and for the phone above.

Leo_83 said:
I'm really unsure of which version is for us in Sweden, there is a version for Tre Sweden but that is not the patriot æ operator she is using and then there is a Nordic version but doesn't fit with the following baseband name
Okay so I tried to flash the Nordic file for kitkat and now the phone is stuck on boot up logo... Don't know which file to install. This is what it says on the box
I need help finding the correct file for kitkat and for the phone above.
Click to expand...
Click to collapse
Hi mate,
Not quite sure what you want.....but if is the firmware with the base band you mention is this one:
http://www.sammobile.com/firmwares/download/43381/I9506XXUDOA6_I9506HTSDOA1_HTS/
Model GT-I9506
Model name GALAXY S4 LTE-A
Country Sweden (Tre)
Version Android 5.0.1
Changelist 3875041
Build date Tue, 13 Jan 2015 12:15:08 +0000
Product code HTS
PDA I9506XXUDOA6
CSC I9506HTSDOA1
MODEM I9506XXUDOA6

MAX 404 said:
Hi mate,
Not quite sure what you want.....but if is the firmware with the base band you mention is this one:
http://www.sammobile.com/firmwares/download/43381/I9506XXUDOA6_I9506HTSDOA1_HTS/
ModelGT-I9506
Model nameGALAXY S4 LTE-A
CountrySweden (Tre)
VersionAndroid 5.0.1
Changelist3875041
Build dateTue, 13 Jan 2015 12:15:08 +0000
Product codeHTS
PDAI9506XXUDOA6
CSCI9506HTSDOA1
MODEMI9506XXUDOA6
Click to expand...
Click to collapse
But that's for the wrong operator, she doesn't use Tre. And I get that that baseband is for lollipop, I want for kitkat.

Your firmware is here. The last three letters of your model number on the box are the device's CSC, which is the regional code Samsung uses to customize the firmware for specific countries. Using that, it was just a matter of drilling to the right place on sammobile.com.

Leo_83 said:
But that's for the wrong operator, she doesn't use Tre. And I get that that baseband is for lollipop, I want for kitkat.
Click to expand...
Click to collapse
Strephon Alkhalikoi said:
Your firmware is here. The last three letters of your model number on the box are the device's CSC, which is the regional code Samsung uses to customize the firmware for specific countries. Using that, it was just a matter of drilling to the right place on sammobile.com.
Click to expand...
Click to collapse
Thanks @Strephon Alkhalikoi
@Leo_83 mate you mention you want the firmware for Sweden and that baseband, not that baseband for a Kitkat rom........I am not quite sure that is possible as they are from different TW versions.....

MAX 404 said:
Thanks @Strephon Alkhalikoi
@Leo_83 mate you mention you want the firmware for Sweden and that baseband, not that baseband for a Kitkat rom........I am not quite sure that is possible as they are from different TW versions.....
Click to expand...
Click to collapse
Yeah I was confused about the baseband, I should just have said kitkat. I know now that new version means new baseband.

Strephon Alkhalikoi said:
Your firmware is here. The last three letters of your model number on the box are the device's CSC, which is the regional code Samsung uses to customize the firmware for specific countries. Using that, it was just a matter of drilling to the right place on sammobile.com.
Click to expand...
Click to collapse
Strange that is the version I downloaded for 4.4.2.
I followed the following guide for flashing
http://forums.androidcentral.com/am...ide-samsung-how-flash-stock-rom-via-odin.html

Leo_83 said:
Strange that is the version I downloaded for 4.4.2.
I followed the following guide for flashing
http://forums.androidcentral.com/am...ide-samsung-how-flash-stock-rom-via-odin.html
Click to expand...
Click to collapse
What version were you before? lollipop? if so you can not downgrade....

Is that because of the massive changes with Android 5, namely ART?

MAX 404 said:
What version were you before? lollipop? if so you can not downgrade....
Click to expand...
Click to collapse
I did it!!
And yes I downgraded from lollipop to kitkat.
I just followed this guide, with the difference of running Odin 3.09 and uncheckning Auto Reboot and waiting for PASS to show in Odin http://forums.androidcentral.com/am...ide-samsung-how-flash-stock-rom-via-odin.html
After that pass is shown in Odin, remove the battery and reboot the phone... Now after start up the phone will get stuck on the boot up animation. Here comes the trick... When you get stuck on boot up turn off the phone and go into recovery this time and do a factory reset!!! Now reboot normally and tada downgraded [emoji4] Guess who has a happy girlfriend now, guess I'm getting lucky tonight [emoji13]

Leo_83 said:
I did it!!
And yes I downgraded from lollipop to kitkat.
I just followed this guide, with the difference of running Odin 3.09 and utcheckning Auto Reboot and waiting for PASS to show in Odin http://forums.androidcentral.com/am...ide-samsung-how-flash-stock-rom-via-odin.html
After that pass come on remove the battery and reboot the phone... Now after start up the phone will get stuck on boot up animation. Here comes the trick... When you get stock on boot turn off the phone and not into recovery this time and do a factory reset!!! Now reboot normally and tada downgraded [emoji4] Guess how has a happy girlfriend now, guess I'm getting lucky tonight [emoji13]
Click to expand...
Click to collapse
Great news mate !!

Leo_83 said:
I did it!!
And yes I downgraded from lollipop to kitkat.
I just followed this guide, with the difference of running Odin 3.09 and uncheckning Auto Reboot and waiting for PASS to show in Odin http://forums.androidcentral.com/am...ide-samsung-how-flash-stock-rom-via-odin.html
After that pass is shown in Odin, remove the battery and reboot the phone... Now after start up the phone will get stuck on the boot up animation. Here comes the trick... When you get stuck on boot up turn off the phone and go into recovery this time and do a factory reset!!! Now reboot normally and tada downgraded [emoji4] Guess who has a happy girlfriend now, guess I'm getting lucky tonight [emoji13]
Click to expand...
Click to collapse
Leo I told you so in the other post... You should have read better
If you downgrade you need to format after flashing the rom by doing HOME + POWER + Volume up to enter recovery and select factory reset and then Proceed <br/>
Click to expand...
Click to collapse

nicogri said:
Leo I told you so in the other post... You should have read better
Click to expand...
Click to collapse
Okay I'm stupid Hahaha *hiding in shame *

[A510FD] Official Firmware (4-Files and One-Package) Download

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello guys,
How are you all,
After doing some digging, I've found the full factory firmware for Samsung A510FD model,
< Firmware Info >
Model: SM-A510FD
Model name: Galaxy A5 (2016)
Country: Saudi Arabia
Version: 5.1.1 Android
Build date: Thu, 10 Mar 2016 08:22:47 +0000
Product code: KSA
BL: A510FXXU2APC4
PDA A510FXXU2APC4
CSC A510FDOJP2APC4
CP: A510FDXXU2APC4
< Content of ZIP >
< Download >
Yandex.Disk
< Firmware Info >
Model: SM-A510FD
Model name: Galaxy A5 (2016)
Country: Saudi Arabia
Version: 5.1.1 Android
Product code: KSA
PDA: A510FXXU1APB1
CSC: A510FDOJP1AOLL
CP: A510FDXXU1APB1
< Content of ZIP >
< Download >
Yandex.Disk
For latest 6.0.1 builds .. check this thread
#NOTE: These files are only for A510FD not A510F, they are different from each other,
and After doing some digging, I've found that the only differences between A510F and A510FD are the (CP, CSC) parts,
and according to GSMArena, A510F was released for the Europe market, While A510FD was released for the Southeast Asia market,
According to that info, You can flash A510F Roms on A510FD without CP, CSC parts, And vice versa.

FRP?
Sophia.xda said:
how to unlock ftp bootlooop please help :9
Click to expand...
Click to collapse
Hello.
FRP Security Lock?
Enter in download mode and flash.

Sophia.xda said:
how to unlock ftp bootlooop please help :9
Click to expand...
Click to collapse
For FRP Bypass just follow this video guide,
https://m.youtube.com/watch?feature=youtu.be&v=8e4ByFzUSAY
Best Regards
Sent from my iPhone 6 using Tapatalk.

possible to downgrade?
hi mirosaw2,
my A510FD is on 6.0.1 turkey firmware.
is possible to downgrade with those file? (4 files)
thank you

skyston
Harjito said:
hi mirosaw2,
my A510FD is on 6.0.1 turkey firmware.
is possible to downgrade with those file? (4 files)
thank you
Click to expand...
Click to collapse
Hi, why do you want to downgrade please ? Because I'm about to upgrade my A5 SM-A510FD (india) to Marshmall SER

skyston said:
Hi, why do you want to downgrade please ? Because I'm about to upgrade my A5 SM-A510FD (india) to Marshmall SER
Click to expand...
Click to collapse
My phone bootscreen missing after flash 6.0.1 . I do not know why like this . This has never happened in my previous phone . This happened , after flash override the official 6.0.1 above cusrom 5.1.1 .
btw , my phone is normal in 6.0.1, except I lost bootscreen

Not available for india ?? A5(2016) indian version firmware ??

teletalk said:
Not available for india ?? A5(2016) indian version firmware ??
Click to expand...
Click to collapse
I think you can flash any A510F firmware on Indian version.

Hello all,
I'm using my galaxy A5 2016 with indian ROM AF510FD and Marshmallow but i want to change for new ROM with French language. Do you know if it's possible to change?

smartyenrique said:
I think you can flash any A510F firmware on Indian version.
Click to expand...
Click to collapse
Its working fine but unable to call on by sim 1. No voLTE. Internet working but no calls in or out..
Sent from my SM-A510F using Tapatalk

Hello I use A510fd version 6.0.1 and can I downgrade it to version 5.1 ?

help please?
i am using the UAE csc version and am on marshmallow,
i want to roll back to lollipop cos marshmellow has too may restrictions such as the screen overlay and inability to lock using a third party app and wake using the fingerprint
my current csc and the one of this package are different, will that effect the phones usage?
also the build dates are different

Thn how can v get version for india??

Please give me a link to get the official firmware of A510fd Indian android version 6.0 or 7.0 . I wanna get back my warranty.

(Firmware Available) EE Marshmallow Official Update SM-G925F

To all EE customers with S6 Edge the Marshallow Update is is now live and can be downloaded from Sam Mobile Link below, if not wait a few hours and I will upload some Mirrors and Torrent Link
Enjoy
Link: http://www.sammobile.com/firmwares/download/71844/G925FXXU3DPDP_G925FEVR3DPD1_EVR/

Need a PIT file if flashing over BTU. This will also mean need to wipe all data.
---------- Post added at 11:52 AM ---------- Previous post was at 11:51 AM ----------
lynxblaine said:
Need a PIT file if flashing over BTU. This will also mean need to wipe all data.
Click to expand...
Click to collapse
I did this yesterday so can confirm that.

What is this.
Enviado desde mi SM-G920F mediante Tapatalk

javitolopez69 said:
What is this.
Enviado desde mi SM-G920F mediante Tapatalk
Click to expand...
Click to collapse
Latest Stock DPDP S6E firmware.

It's a UK carrier and contains WiFi calling.
For some reason my battery life after flashing this is hugely better.

lynxblaine said:
Need a PIT file if flashing over BTU. This will also mean need to wipe all data.
Click to expand...
Click to collapse
But if I was on EE before I went to XEU and didn't flash the PIT file to do that then surely my partitions have remained the same size so I don't have to resize them for the EE update.
Also wasn't it just Vodafone customers that had to flash a PIT to go to Marshmallow XEU/BTU version??

bobjbain said:
But if I was on EE before I went to XEU and didn't flash the PIT file to do that then surely my partitions have remained the same size so I don't have to resize them for the EE update.
Also wasn't it just Vodafone customers that had to flash a PIT to go to Marshmallow XEU/BTU version??
Click to expand...
Click to collapse
If you flashed from EE to BTU then you partitions should stay the same and be bigger for the 'hidden' part. If you did what I did and did a full wipe and restore onto BTU from EVR then you may need the PIT file. I tried to flash first without the PIT file and it failed. Just offering some caution for people who flash.

Could someone upload the firmware please (mirror or torrent)?
Also I don't really remember doing so but I must have upgraded to the following firmware back in December (rooted 6.0 beta I think) - Is there any way I can retain root / re-root after updating to the EE firmware but keep features such as Wifi Calling?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
https://cdn.pbrd.co/images/18F1kjWH.png
Thanks!

Not sure about root. Almost certainly will have to reroot. I would say use the tool called samfirm - will download directly from Samsung at really high speeds no need to use mirrors.
Flash it assuming you may need to wipe cache, and possibly factory reset in case of bugs. Battery life seems really good currently.

I flashed btu from evr. Will I need the pit file to revert back to evr? If so where can I get it from?
And can u provide a guide to using it
Thanks in advance

lol just plugged in my phone to do a backup and found this one too

Tealc111 said:
I flashed btu from evr. Will I need the pit file to revert back to evr? If so where can I get it from?
And can u provide a guide to using it
Thanks in advance
Click to expand...
Click to collapse
http://www.sammobile.com/forum/showthread.php?t=30136
The EVR PIT can be found here.
You may find you don't need the PIT file.
You put the pit file into the BL section of Odin 3.10
You can do it with the EVR firmware, or on its own. It should tick 're-partition' . This bit makes me nervous. Use a good cable.
http://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
Samfirm is the greatest tool for downloading latest firmware from Samsung, I downloaded it at 4.5MB/s rather than 100KB/s

Thanks for the heads up about Samfirm!

Tealc111 said:
I flashed btu from evr. Will I need the pit file to revert back to evr? If so where can I get it from?
And can u provide a guide to using it
Thanks in advance
Click to expand...
Click to collapse
If you didn't flash the PIT file when you went from EVR to BTU then you shouldn't need it to go back!!

bobjbain said:
If you didn't flash the PIT file when you went from EVR to BTU then you shouldn't need it to go back!!
Click to expand...
Click to collapse
Don't think I did. I just downloaded the btu firmware via samfirm tool I believe

Tealc111 said:
Don't think I did. I just downloaded the btu firmware via samfirm tool I believe
Click to expand...
Click to collapse
And saying that I've just tried flashing the EVR from XEU and it failed on the hidden.img!!
Oh well

bobjbain said:
And saying that I've just tried flashing the EVR from XEU and it failed on the hidden.img!!
Oh well
Click to expand...
Click to collapse
Oh so maybe need the pit then
Will flashing the pit trip knox or will it be fine still

Tealc111 said:
Oh so maybe need the pit then
Will flashing the pit trip knox or will it be fine still
Click to expand...
Click to collapse
It won't trip Knox but try flashing without the PIT file first

nice little update! Phone seems a lot smoother and battery life seems slightly better.
Feels like the 'edge' part actually has a purpose now!

Hello guys. Does anybody have a changelog for this update?
Thanks

SM-G950FD Official ROM

I have just acquired the international factory unlocked Galaxy S8, model number SM-G950FD duel sim, and don't see that specific variant on Sammobile official rom downloads. There are many SM-G950F downloads and correct me if I'm wrong, but I assume they would work, only problem is don't know which region I should use. There are 7 or 8 different regions with the matching PDA and CSC sequences as mine, but does it matter which one I choose? Just want to be sure I have the proper "official" backup rom before I venture into rooting etc.
Have searched this thread and the net to no avail.
Any advice and clarification on this would be greatly appreciated!

G950FD is a variant of G950F. But still I'm not sure if you can flash it or not because modem, bootloader and baseband are exact model number exclusive. Btw Sammobile is not official provider of stock rom. You can try using Samsung's official app.

OK thanks! Now when you say "try using Samsung's official app", do you mean Smartswitch for Windows or Kies 3 or something other?

eltoro5 said:
OK thanks! Now when you say "try using Samsung's official app", do you mean Smartswitch for Windows or Kies 3 or something other?
Click to expand...
Click to collapse
Yes I was talking about SmartSwitch.

Fd and f are the same just flash away

undercontr said:
Yes I was talking about SmartSwitch.
Click to expand...
Click to collapse
So sure enough I locked myself out of my phone after rooting (don't ask) only access was download mode, so I tried SmartSwitch and it got me back up and running! So thank you very much for the tip "undercontr"!
Only thing I would suggest is to ensure you have your phone's serial number (required for SmartSwitch) on hand. Because other than acquiring from the dialer code, the only other place is on the sticker on back of phone....it's not on the box. So keep your sticker in a safe place when you remove from back of phone!

eltoro5 said:
So sure enough I locked myself out of my phone after rooting (don't ask) only access was download mode, so I tried SmartSwitch and it got me back up and running! So thank you very much for the tip "undercontr"!
Only thing I would suggest is to ensure you have your phone's serial number (required for SmartSwitch) on hand. Because other than acquiring from the dialer code, the only other place is on the sticker on back of phone....it's not on the box. So keep your sticker in a safe place when you remove from back of phone!
Click to expand...
Click to collapse
If you're not hanging around forbidden stuff in Android, you should always stick to official stuff. Stability is greater in that way.
I wouldn't root my device if it has still warranty.

Rom [[ sm-g950f ]] (( turkey )) from sammobile
work on sm-g950fd >>>

mlikal3oood said:
Rom [[ sm-g950f ]] (( turkey )) from sammobile
work on sm-g950fd >>>
Click to expand...
Click to collapse
I have SM-G950FD (Duos model) . Can i use SM-950F (Turkey) firmware for DUOS Model ? Tested ? After flash firmware any signal problem ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

F Firmware works for FD as well. There's no difference.
Pull the firmware for SM-G950F from Samfirm tool, according to your region.

JazonX said:
F Firmware works for FD as well. There's no difference.
Pull the firmware for SM-G950F from Samfirm tool, according to your region.
Click to expand...
Click to collapse
Did you try on S8 Duos ?

Worked Perfectly Single Sim - Dual Sim firmware same. SM-G950F

ok, the F firmware works well on FD device, but can I put 2 sim cards on F firmware or it will work with one sim card only?

DJC_SP said:
ok, the F firmware works well on FD device, but can I put 2 sim cards on F firmware or it will work with one sim card only?
Click to expand...
Click to collapse
2 Simcard working perfectly same time.

I have G950F phone, and I'm trying to get Samsung Pay US to work. Can I flash G950FD (XSG) firmware on my G950F phone?
When I had my S7 edge (G935F), I had XSG firmware and I was able to get Samsung Pay US to work but XSG model was G935F then and not G935FD.

alidarkstone said:
Did you try on S8 Duos ?
Click to expand...
Click to collapse
Yes, Mine is XSG. So using the MID firmware from SAMFIRM.

eltoro5 said:
I have just acquired the international factory unlocked Galaxy S8, model number SM-G950FD duel sim, and don't see that specific variant on Sammobile official rom downloads. There are many SM-G950F downloads and correct me if I'm wrong, but I assume they would work, only problem is don't know which region I should use. There are 7 or 8 different regions with the matching PDA and CSC sequences as mine, but does it matter which one I choose? Just want to be sure I have the proper "official" backup rom before I venture into rooting etc.
Have searched this thread and the net to no avail.
Any advice and clarification on this would be greatly appreciated!
Click to expand...
Click to collapse
(sorry I am noob, cannot post formatted hyperlink): updato.com/firmware-archive-select-model is good for downloading firmware.
And thanks to everyone here! - I was coming to ask same question: Would I brick my SM-G955FD by flashing SM-G955F software.. (to enable native WiFi Callling/VoWiFi by fllashing to a region which does not have SM-G955FD specific firmware).

Can you get like a another sim tray and use sd card? I'm presuming its the same as F and no real changes tbh

MrPhilo said:
Can you get like a another sim tray and use sd card? I'm presuming its the same as F and no real changes tbh
Click to expand...
Click to collapse
I just checked my Duo; The SIM Tray has a 'SIM1' slot, and a 'SIM2/MicroSD' slot which looks like it can take either (not both).

work bouth card

~G955U~AT&T Stock Odin files G955USQS1AQF7

AT&T Stock ODIN G955USQS1AQF7 , For those that might need it!
Link: https://www.androidfilehost.com/?fid=961840155545583640
MD5: 91ac5aa5686452bb1434b11bb796eeb2
ODIN v3.12.5: https://www.androidfilehost.com/?fid=817550096634787635
MD5: b842e9d1c91f4fe8c9394ee9859320b0

Spent forever downloading from updato, then the zip wouldn't extract
Sent from my SM-G955U using Tapatalk

Link is up!

Venom0642 said:
Link is up!
Click to expand...
Click to collapse
Awesome!! If LRA region are AT&T I will have very easy way to download Odin firmware as soon as at&t release update.
On Edge of Galaxy

This works wonderfully!! Bixby works now!! Thank you!

should I only flash ap if I don't wanna lose data or am I supposed to flash everything?

I flashed everything and I didn't lose any data. Except home and userdata. I used 4 files only.

Venom0642 said:
Link is up!
Click to expand...
Click to collapse
Ok here you got , i think this is exactly same firmware.
Download zip from attachment
unzip and start
In model :SM- G955U
In region : LRA, USC or ACG all regions are same as AT&T if you just flash 4 files with out HOME_CRC or USER_DATA
Check : auto, checkCRC32, Decrypt automatically
hit : Check for updates.
it took me around 7 min to download firmware.
EDIT: Has tag from what i download my way is exactly the same as yours
EDIT2: fixed error.

norbarb said:
Ok here you got , i think this is exactly same firmware.
Download zip from attachment
unzip and start
In model : G955U
In region : LRA
Check : auto, checkCRC32, Decrypt automatically
hit : Check for updates.
it took me around 7 min to download firmware.
EDIT: Has tag from what i download my way is exactly the same as yours
Click to expand...
Click to collapse
This is what shows when hit update!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Venom0642 said:
This is what shows when hit update!
View attachment 4220431
Click to expand...
Click to collapse
It is my mistake... forget to add SM-G955U ...lol
Model should looks like this : SM-G955U

norbarb said:
It is my mistake... forget to add SM-G955U ...lol
Model should looks like this : SM-G955U
Click to expand...
Click to collapse
Yup same one took me 5min and 14sec to download it lol , but it's AT&T S8 Plus QF7
Sent from my Samsung Galaxy S8+ using XDA Labs

Venom0642 said:
Yup same one took me 5min and 14sec to download it lol , but it's AT&T S8 Plus QF7
Sent from my Samsung Galaxy S8+ using XDA Labs
Click to expand...
Click to collapse
Looks like do to weekend they did not updated yet to QG1

First Time
I flashed my T-Mobile S8+ to AT&T successfully the other day. In order for me to install this newer version, I assume I just have to do it in Odin like before? I followed this guide (Flashing Standard Firmware) after doing the Carrier Switch last time: https://forum.xda-developers.com/galaxy-s8+/how-to/snap-guide-flashing-standard-fw-carrier-t3627255
Just making sure from now on I just basically have to do the updates in Odin...

Venom0642 said:
AT&T Stock ODIN G955USQS1AQF7 , For those that might need it!
Link: https://www.androidfilehost.com/?fid=961840155545583640
MD5: 91ac5aa5686452bb1434b11bb796eeb2
ODIN v3.12.5: https://www.androidfilehost.com/?fid=817550096634787635
MD5: b842e9d1c91f4fe8c9394ee9859320b0
Click to expand...
Click to collapse
I have a Verizon galaxy s8 plus that I am currently using on AT&T's prepaid service can I install this software/firmware on my phone without the risk of bricking it?
I don't need to have the phone unlocked correct? (if that is even possible right now)
norbarb said:
Awesome!! If LRA region are AT&T I will have very easy way to download Odin firmware as soon as at&t release update.
On Edge of Galaxy
Click to expand...
Click to collapse
what is LRA region? (noob question I know)

Ma$etas said:
I have a Verizon galaxy s8 plus that I am currently using on AT&T's prepaid service can I install this software/firmware on my phone without the risk of bricking it?
I don't need to have the phone unlocked correct? (if that is even possible right now)
what is LRA region? (noob question I know)
Click to expand...
Click to collapse
LRA region are Bluegrass service by Verizon. I did not flash this firmware but people claim this is same as AT&T. Yes you can flash w/o any problem.
On Edge of Galaxy

A newb here...
I am on AT&T with AT&T stock firmware G955USQU1AQC9 with March 1, 2017 security patch level after flashing T-mobile S8+ using one of the tutorials here. I am not getting OTA, device says I have the most recent firmware...
I have two concerns here:
1. If I download this and flash it using ODIN will I be able to get the July security patch via OTA?
2. Which files should I use in order to keep device as is, without loosing any data or settings?

I flashed this and did not receive the OTA update to AQG1. I am on ATT and did not change my carrier firmware. What gives? Thanks

If anybody can answer this.... what is the difference from G955USQU1AQGF and G955U1UEU1AQG2

blkghost22 said:
If anybody can answer this.... what is the difference from G955USQU1AQGF and G955U1UEU1AQG2View attachment 4229126
Click to expand...
Click to collapse
There is no AQG2 firmware and we know that AQGF exists. This is huge difference.
On Edge of Galaxy

I am about to flash this file I already have everything extracted and ODIN opened.
but I see from the extracted file there is 6 files available but ODIN only has 5 slots.
Extracted are
AP, BL, CP, CSC_OYN, HOME_CSC_OYN, and user data.
but odin only has slots for
AP, BL, CP, CSC, UMS
can someone tell me what I use in each slot (besides the AP, BL, CP)
what CSC file do use for CSC slot is it CSC_OYN or Home_CSC_OYN?
EDIT: so I found that Home_CSC goes in CSC and this one is used when you don't want anything to be wiped.
CSC_OYN is used when you want to wipe.
Now just need to know what to put in UMS