Database Users

Samsung Galaxy S I9000 Stock Roms

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Samsung Galaxy S I9000 Stock Firmware
PLEASE ONLY GO AHEAD IF YOU KNOW WHAT YOUR DOING
ODIN - FLASH UTILITY - DOWNLOAD
United Kingdom (Carphone Warehouse) 2012 April 2.3.6 (PDA-I9000XXJW4) (CSC-I9000OXAJW5) DOWNLOAD

Thanks Bro! Y need this

Lots more here:
http://forum.xda-developers.com/showthread.php?t=1102881&page=1

Sorry, i'm not fluent in English, and want to be sure to understand: what means "stock"? Is it a "normal" rom, without any phone operator modification?

stock ROM means it's an unmodified ROM from manufacturer (in this case from Samsung) that is exactly the same as u would have gotten fresh off the factory. No modification from programmers or developers or phone operators, just the original samsung stuff.

Thanks a lot for your answer. That's exactly what i'm looking for.
Is it safe to flash the latest version available simply with odin or i have to do something else before?

Sorry haven't visited xda for quite a while, Does this include boot image? I'm coming from froyo? Is it okay to flash this to a froyo custom rom?
Sent from my A500 using XDA Premium App

Mydriaze said:
Thanks a lot for your answer. That's exactly what i'm looking for.
Is it safe to flash the latest version available simply with odin or i have to do something else before?
Click to expand...
Click to collapse
Its safe to flash via ODIN

nimrod_axl said:
Sorry haven't visited xda for quite a while, Does this include boot image? I'm coming from froyo? Is it okay to flash this to a froyo custom rom?
Sent from my A500 using XDA Premium App
Click to expand...
Click to collapse
These are entire firmware's so it included everything, not sure what these are DO NOT FLASH.

HEY please can you help me out. bit of advise
i have 2.3.6 Europe version installed.
wanted Arabic so thought of installing this,
I9000JHJV8
what do i select in odin ?
there is just a single file in the extracted downloaded file (which is tar)
what about CSC and modem.
and i will have to selected repartition also, is it not .
Thanks.

etfreind said:
HEY please can you help me out. bit of advise
i have 2.3.6 Europe version installed.
wanted Arabic so thought of installing this,
I9000JHJV8
what do i select in odin ?
there is just a single file in the extracted downloaded file (which is tar)
what about CSC and modem.
and i will have to selected repartition also, is it not .
Thanks.
Click to expand...
Click to collapse
Select one package on the left. Odin will do the rest also the "pit" file needs to be added.

Europe Links are dead, can someone update them please?

Where to download the files
All the files seems to be removed. Where can I find them?

you can add links from this site as alternative downloads
http://samsung-updates.com/device/?id=GT-I9000
i guarantee the download will be faster then from hosting sites ...

as people have mentioned above all the links are dead... my samsung i9000 mobile is in reboot mode (does not get past logo at start) i need to reflash using odin - but can not find all the files that I need.
please update links.
thanks

Removed links!!
The america link has been removed do you know where i can get a working link for galaxy s i9000 american version?

i need 513.pit urgently
i need 513.pit urgently..
the link at the top post is dead..
tq guys

sorry everyone haven't been on here for a while PIT files are not even on samsungs website any more maybe its n the RAR, any other countries you want me to add??? Country + Operator

513.pit
ryanraven said:
sorry everyone haven't been on here for a while PIT files are not even on samsungs website any more maybe its n the RAR, any other countries you want me to add??? Country + Operator
Click to expand...
Click to collapse
I need to unbrick my sgs i9000.. firmware 2.3.3 dxjv
i need 513.pit and i'm from Malaysia

sharan1289 said:
I need to unbrick my sgs i9000.. firmware 2.3.3 dxjv
i need 513.pit and i'm from Malaysia
Click to expand...
Click to collapse
what operator do you use ?
try this http://www.hotfile.com/dl/163461926/59ba64e/I9000DXJV9_I9000OLBJV9_XME.zip.html
may contain the PIT file not 100% sure

Low ship I9300 firmware for flashing with PIT. (three files firmware)

Low ship I9300 firmware for flashing with PIT.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I used Heimdall to download the PIT from phone and it is almost identical to the pit found on web... except the ending zeros....
Downloading I9300 PIT using Heimdall:
I would appreciate all professional feedback.
THe firmware contains the below files.
boot.img
cache.img
hidden.img
modem.bin
param.bin
recovery.img
sboot.bin
system.img
tz.img
I don't know what is:
tz.img
Any clue?
I will update the thread with my findings.
All this may be obvious for some, but I also met many people who miss "flashing with PIT" option.
I also read often that flashing with pit is not advised and dangerous.
So do all this carefully...
DOWNLOAD 3-FILES FIRMWARE
https://hotfile.com/dl/156320160/eb4a939/I9300XXALE8_I9300OJVALE7_OJV.zip.html
PIT file:
View attachment I9300.zip

can mx.pit be used for 32gb s3 ??
thank you.

I still fail to see why anyone (with a working device) would want to flash using .PIT.... so many things that can go wrong with that....
sebarkh said:
I don't know what is:
tz.img
Any clue?
Click to expand...
Click to collapse
ARM Trust Zone. (link)
The zeros in the other PIT file is padding.
Which is which, is the padded the one you downloaded or the one comming with the update?
Not sure if the padding it required for flashing, I suppose not, so if they are identical expect for those zeros, they are identical.

The pit "with zeros" is the one I downloaded from the device.
The one without zeros is the one found on the internet (I suppose 29.03.2012 version).
Sent from my Galaxy SIII

The padding is probably done by Odin anyway.
Sent from my GT-I9300 using xda app-developers app

I actually want to reflash everything possibly onto my phone. I believe the modem area is corrupted because I can get data but no talk or text. It's a common issue and people say only sending the device to Samsung will fix it, but the phone is from the UK and I live in the US. How would I go about flashing these with ODIN, and would they do anything? I've tried EVERYTHING possible to fix the issue, including flashing new modems, ROMs, stock ROMs, kernels, formatting partitions, etc.

Im curious if there is a full firmware that will format all data on the phone. Like DATA.IMG in galaxy s2 i9100.

[please can you upload file in the other link hotfile closed please i need this tuto so much i be thankfull

odin3-1.81
efs clear
boot loader update with rescue files

thank you :laugh:

Does somebody has a fresh link for this firmware. Please no OCH with premium options. THX!

overflyer said:
Does somebody has a fresh link for this firmware. Please no OCH with premium options. THX!
Click to expand...
Click to collapse
anyone have new link ?? pls update

overflyer said:
Does somebody has a fresh link for this firmware. Please no OCH with premium options. THX!
Click to expand...
Click to collapse
[email protected] said:
anyone have new link ?? pls update
Click to expand...
Click to collapse
http://fr.sourceforge.jp/projects/s...0/Stock rom/I9300XXALE8_I9300OJVALE7_OJV.zip/

sebarkh said:
PIT file:
View attachment 1221587
Click to expand...
Click to collapse
Hey man, don't know if you're still active, since it's what like 6.
However thank you so much for this file. It has saved my bacon.
Just got a new S9, trading in my olddddd S3. Turned it back on before sending it off, and it's modded to ****. Needed to revert it before I sent it back! Could not flash anything to it. Tried with your .pit file. and it's worked perfectly!
Thank you!

Amiasbacon said:
Hey man, don't know if you're still active, since it's what like 6.
However thank you so much for this file. It has saved my bacon.
Just got a new S9, trading in my olddddd S3. Turned it back on before sending it off, and it's modded to ****. Needed to revert it before I sent it back! Could not flash anything to it. Tried with your .pit file. and it's worked perfectly!
Thank you!
Click to expand...
Click to collapse
OMG,
Sooo many years. And it's still serving somebody!

[Q] how to downgrade lollipop to kitkat?

Hi. I have recently updated my note 3 N9005 Lte from Kitkat 4.4.2 to Lollipoo and also updated the BL,CSC,CP AND PIT File. Now is it possible to downgrade it back to Kitkat firmware? N9005XX...B7 BTU version ?

It's pretty simple.
1. Do the factory reset
2.Install KK via odin
3. Enjoy your KK
It worked for me on GNG1 ROM

gns3555 said:
Hi. I have recently updated my note 3 N9005 Lte from Kitkat 4.4.2 to Lollipoo and also updated the BL,CSC,CP AND PIT File. Now is it possible to downgrade it back to Kitkat firmware? N9005XX...B7 BTU version ?
Click to expand...
Click to collapse
tell me if you do it without any problem???????
thanks

jemis1983 said:
tell me if you do it without any problem???????
thanks
Click to expand...
Click to collapse
Why don't you do it first and then tell me if it worked for you or not

gns3555 said:
Why don't you do it first and then tell me if it worked for you or not
Click to expand...
Click to collapse
Lol:sly::sly::sly::sly::sly:

jemis1983 said:
tell me if you do it without any problem???????
thanks
Click to expand...
Click to collapse
I am restoring my nandroid backup of 4.4.2 after flashin lollipop for testing, aannnnnndddd its working fine. Using n9005.

You dont try with odin????

dollar7 said:
It's pretty simple.
1. Do the factory reset
2.Install KK via odin
3. Enjoy your KK
It worked for me on GNG1 ROM
Click to expand...
Click to collapse
I wouldn´t risk to do it like this. If you have updated the bootloader, I think you can´t just flash the KK via Odin. If you have updated the bootloader, there is no back to roll back. If not, you have still a chance.

flashing leaked KitKat
hi,
what about to flash the leaked KitKat which contains all the files needed for Odin, including bootloader? What do you think about it guys?

fadhil3536 said:
I am restoring my nandroid backup of 4.4.2 after flashin lollipop for testing, aannnnnndddd its working fine. Using n9005.
Click to expand...
Click to collapse
do upgrade with odine?????

I tried downgrading using the Leaked Polish KitKat to no help.
First tried to downgrade using the original Australian one. It failed by Odin.
Then tried with a .PIT file and the corresponding Germany firmware, didnt work either. Phone wasnt even switching on, gave some error saying firmware update went wrong, connect to Kies... or something similar.
Just to see I reinstalled the Lollipop, It worked just fine.
Then saw about the Polish KitKat leak with all the BL/CSC/AP and all files, downloaded and tried.
For my joy, It installed just fine, but my joy ended when I booted into the OS, it was all buggy, network not working, constant app crashing, camera fail, and made me really scared when It showed that my IMEI number is NULL!! I thought Im so done....
Then tried the German KitKat with the Polish leak's Boot Loader (BL) file, it failed too.
Since I was so worried about the phone getting address-less (No IMEI, no other addresses) I tried reinstalling the Lollipop leak.
It worked again like a charm, and my IMEI n everything else is back.
So looks like Ill have to wait till we get an official Lollipop update, so I can get out of the leak.

jemis1983 said:
do upgrade with odine?????
Click to expand...
Click to collapse
I have rom crash lollipop and want to go to 4.4.2 official.how will do;

antriou26 said:
I have rom crash lollipop and want to go to 4.4.2 official.how will do;
Click to expand...
Click to collapse
download you rofficial firmware from sammobile website flash your file with odin easy!!!!!:good:

jemis1983 said:
download you rofficial firmware from sammobile website flash your file with odin easy!!!!!:good:
Click to expand...
Click to collapse
And this works? I have my doubt though... but please provide proof i want to downgrade too unsupported YET
Thanks

Silassentinel said:
And this works? I have my doubt though... but please provide proof i want to downgrade too unsupported YET
Thanks
Click to expand...
Click to collapse
Yes for me everything is going well!!!!

What version of Odin do you use? Thanks

hi
Dear how to check if the bootloader is updated or not?
motorkar1234 said:
I wouldn´t risk to do it like this. If you have updated the bootloader, I think you can´t just flash the KK via Odin. If you have updated the bootloader, there is no back to roll back. If not, you have still a chance.
Click to expand...
Click to collapse
---------- Post added at 07:01 AM ---------- Previous post was at 06:43 AM ----------
dear from where i can get tje KK file??
dollar7 said:
It's pretty simple.
1. Do the factory reset
2.Install KK via odin
3. Enjoy your KK
It worked for me on GNG1 ROM
Click to expand...
Click to collapse

Downgrade to JELLY BEAN
gns3555 said:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi. I have recently updated my Note 3 N9005 Lte from Kitkat 4.4.2 to Lollipop and also updated the BL,CSC,CP AND PIT File. Now is it possible to downgrade it back to Kitkat firmware? N9005XX...B7 BTU version ?
Click to expand...
Click to collapse
Downgrade to Jelly Bean Instead!
KitKat is bogus‼
Really, downgrading to JB is worthed it!
http://forum.xda-developers.com/showpost.php?p=56548111&postcount=8&styleid=18

I'm sorry, I don't know how to check whether the bootloader is updated.
Btw, Stallione, when the IMEI is gone, you can restore it from EFS backup

jemis1983 said:
Yes for me everything is going well!!!!
Click to expand...
Click to collapse
Nice, how did you do this? It keeps failing for me...

~G955U~AT&T Stock Odin files G955USQS1AQF7

AT&T Stock ODIN G955USQS1AQF7 , For those that might need it!
Link: https://www.androidfilehost.com/?fid=961840155545583640
MD5: 91ac5aa5686452bb1434b11bb796eeb2
ODIN v3.12.5: https://www.androidfilehost.com/?fid=817550096634787635
MD5: b842e9d1c91f4fe8c9394ee9859320b0

Spent forever downloading from updato, then the zip wouldn't extract
Sent from my SM-G955U using Tapatalk

Link is up!

Venom0642 said:
Link is up!
Click to expand...
Click to collapse
Awesome!! If LRA region are AT&T I will have very easy way to download Odin firmware as soon as at&t release update.
On Edge of Galaxy

This works wonderfully!! Bixby works now!! Thank you!

should I only flash ap if I don't wanna lose data or am I supposed to flash everything?

I flashed everything and I didn't lose any data. Except home and userdata. I used 4 files only.

Venom0642 said:
Link is up!
Click to expand...
Click to collapse
Ok here you got , i think this is exactly same firmware.
Download zip from attachment
unzip and start
In model :SM- G955U
In region : LRA, USC or ACG all regions are same as AT&T if you just flash 4 files with out HOME_CRC or USER_DATA
Check : auto, checkCRC32, Decrypt automatically
hit : Check for updates.
it took me around 7 min to download firmware.
EDIT: Has tag from what i download my way is exactly the same as yours
EDIT2: fixed error.

norbarb said:
Ok here you got , i think this is exactly same firmware.
Download zip from attachment
unzip and start
In model : G955U
In region : LRA
Check : auto, checkCRC32, Decrypt automatically
hit : Check for updates.
it took me around 7 min to download firmware.
EDIT: Has tag from what i download my way is exactly the same as yours
Click to expand...
Click to collapse
This is what shows when hit update!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Venom0642 said:
This is what shows when hit update!
View attachment 4220431
Click to expand...
Click to collapse
It is my mistake... forget to add SM-G955U ...lol
Model should looks like this : SM-G955U

norbarb said:
It is my mistake... forget to add SM-G955U ...lol
Model should looks like this : SM-G955U
Click to expand...
Click to collapse
Yup same one took me 5min and 14sec to download it lol , but it's AT&T S8 Plus QF7
Sent from my Samsung Galaxy S8+ using XDA Labs

Venom0642 said:
Yup same one took me 5min and 14sec to download it lol , but it's AT&T S8 Plus QF7
Sent from my Samsung Galaxy S8+ using XDA Labs
Click to expand...
Click to collapse
Looks like do to weekend they did not updated yet to QG1

First Time
I flashed my T-Mobile S8+ to AT&T successfully the other day. In order for me to install this newer version, I assume I just have to do it in Odin like before? I followed this guide (Flashing Standard Firmware) after doing the Carrier Switch last time: https://forum.xda-developers.com/galaxy-s8+/how-to/snap-guide-flashing-standard-fw-carrier-t3627255
Just making sure from now on I just basically have to do the updates in Odin...

Venom0642 said:
AT&T Stock ODIN G955USQS1AQF7 , For those that might need it!
Link: https://www.androidfilehost.com/?fid=961840155545583640
MD5: 91ac5aa5686452bb1434b11bb796eeb2
ODIN v3.12.5: https://www.androidfilehost.com/?fid=817550096634787635
MD5: b842e9d1c91f4fe8c9394ee9859320b0
Click to expand...
Click to collapse
I have a Verizon galaxy s8 plus that I am currently using on AT&T's prepaid service can I install this software/firmware on my phone without the risk of bricking it?
I don't need to have the phone unlocked correct? (if that is even possible right now)
norbarb said:
Awesome!! If LRA region are AT&T I will have very easy way to download Odin firmware as soon as at&t release update.
On Edge of Galaxy
Click to expand...
Click to collapse
what is LRA region? (noob question I know)

Ma$etas said:
I have a Verizon galaxy s8 plus that I am currently using on AT&T's prepaid service can I install this software/firmware on my phone without the risk of bricking it?
I don't need to have the phone unlocked correct? (if that is even possible right now)
what is LRA region? (noob question I know)
Click to expand...
Click to collapse
LRA region are Bluegrass service by Verizon. I did not flash this firmware but people claim this is same as AT&T. Yes you can flash w/o any problem.
On Edge of Galaxy

A newb here...
I am on AT&T with AT&T stock firmware G955USQU1AQC9 with March 1, 2017 security patch level after flashing T-mobile S8+ using one of the tutorials here. I am not getting OTA, device says I have the most recent firmware...
I have two concerns here:
1. If I download this and flash it using ODIN will I be able to get the July security patch via OTA?
2. Which files should I use in order to keep device as is, without loosing any data or settings?

I flashed this and did not receive the OTA update to AQG1. I am on ATT and did not change my carrier firmware. What gives? Thanks

If anybody can answer this.... what is the difference from G955USQU1AQGF and G955U1UEU1AQG2

blkghost22 said:
If anybody can answer this.... what is the difference from G955USQU1AQGF and G955U1UEU1AQG2View attachment 4229126
Click to expand...
Click to collapse
There is no AQG2 firmware and we know that AQGF exists. This is huge difference.
On Edge of Galaxy

I am about to flash this file I already have everything extracted and ODIN opened.
but I see from the extracted file there is 6 files available but ODIN only has 5 slots.
Extracted are
AP, BL, CP, CSC_OYN, HOME_CSC_OYN, and user data.
but odin only has slots for
AP, BL, CP, CSC, UMS
can someone tell me what I use in each slot (besides the AP, BL, CP)
what CSC file do use for CSC slot is it CSC_OYN or Home_CSC_OYN?
EDIT: so I found that Home_CSC goes in CSC and this one is used when you don't want anything to be wiped.
CSC_OYN is used when you want to wipe.
Now just need to know what to put in UMS

Installing G935U firmware on G935T

Hello xda members, as title says, i want to install G935U firmware on my T-Mobile device, currently iam on stock T-Mobile firmware (as shown below) ...
Its my first US model device, so bit scared about doing this type of installation, thats why iam here to ask for help ...
So please guide me how to install this U firmware on my T-Mobile device, and is it safe to do it or not, and which files are required for flashing in odin ...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

ammad368 said:
Hello xda members, as title says, i want to install G935U firmware on my T-Mobile device, currently iam on stock T-Mobile firmware (as shown below) ...
Its my first US model device, so bit scared about doing this type of installation, thats why iam here to ask for help ...
So please guide me how to install this U firmware on my T-Mobile device, and is it safe to do it or not, and which files are required for flashing in odin ...
View attachment 4363061View attachment 4363062View attachment 4363063
Click to expand...
Click to collapse
I have heard the roms are interchangeable, I would try but this is the only phone I have atm so I dunno

Anyone who would like to help ?
I need step-by-step guide ...

ammad368 said:
Anyone who would like to help ?
I need step-by-step guide ...
Click to expand...
Click to collapse
Just search around the forums, they have a few guides. I would suggest looking at the att and Verizon forums for the s7 edge. The roms are interchangeable
https://forum.xda-developers.com/ve...de-flashing-sm-935u-firmware-verizon-t3415145.

My phone is G935T and I flashed G935U.
There is no auto upgrade, so it is a bit tedious every time there is new firmware out, manually has to flash, but otherwise it is VERY lean on included applications and also IMHO is lighter on battery usage.
That said, just get the ODIN and both firmwares (G935T firmware as well as G935U firmware).
Then, use ODIN to flash the CP file from G935T firmware and rest of the files from G935U firmware.
Enjoy.

hpark21 said:
My phone is G935T and I flashed G935U.
There is no auto upgrade, so it is a bit tedious every time there is new firmware out, manually has to flash, but otherwise it is VERY lean on included applications and also IMHO is lighter on battery usage.
That said, just get the ODIN and both firmwares (G935T firmware as well as G935U firmware).
Then, use ODIN to flash the CP file from G935T firmware and rest of the files from G935U firmware.
Enjoy.
Click to expand...
Click to collapse
I also have 935T and updated to 935U few months ago. I get OTA updates regularly

cnewsgrp said:
I also have 935T and updated to 935U few months ago. I get OTA updates regularly
Click to expand...
Click to collapse
Did you flash the U firmware with CP file from T like I did? (Which is preferred since I am still using the phone on T-mobile network)
Whenever I press "check for update", I always get "you have latest" message even when I KNOW there is new one out there.
Perhaps if ALL firmware files are from "U" firmware, maybe it will do auto update (or prompt you for update).

hpark21 said:
Did you flash the U firmware with CP file from T like I did? (Which is preferred since I am still using the phone on T-mobile network)
Whenever I press "check for update", I always get "you have latest" message even when I KNOW there is new one out there.
Perhaps if ALL firmware files are from "U" firmware, maybe it will do auto update (or prompt you for update).
Click to expand...
Click to collapse
In order to update, you must have all files from the same update. So running the tmobile radio is why it won't update you.
Sent from my SM-G935U using XDA Premium HD app

I can confirm this does work. I just installed the 935U software on my tmobile s7 edge and am now using the phone on Page Plus service. Everything is working great for over 24 hours now.

Hello,
I would like to update my S7 edge G935T to G935U.
THE ONLY PROBLEM is that it is the only phone I have and that I use so I am afraid of blocking it by making its so is it 100% safe to do so? AND can I have a guide?

yeah its safe until you do it properly.
Use Odin Latest version.
Turn Phone into download mode.
connect to pc using Odin.
Add required files into Odin and hit start. Thats it.
i just updated my T mobile G935T to G935U now and its working fine.
here is download link for firmware.

shahab172 said:
yeah its safe until you do it properly.
Use Odin Latest version.
Turn Phone into download mode.
connect to pc using Odin.
Add required files into Odin and hit start. Thats it.
i just updated my T mobile G935T to G935U now and its working fine.
here is download link for firmware.
Click to expand...
Click to collapse
can you share the download link.
I found a list of firmwares here https://www.sammobile.com/samsung/galaxy-s7-edge/firmware/#SM-G935U
Not sure which one is the right one

Just Flashed Latest G935U firmware on my G935T.
Got rid of that Tmobile logo and bloatwares. Everything is working awesome. Faster than ever.
Steps I followed:
Downloaded Latest G935U firmware from Samfrew with TMO CSC.
Flashed AP, CP, CSC (not BL).
Device rebooted and performed a factory reset. Set CSC according to my simcard and finally booted in no time.
All of these took around 15 minutes.
PS
My device was on latest G935T firmware before.
Its carrier unlocked.
Sent from my SM-G935U using Tapatalk