I bricked my HTC 10 by loading Marshmallow firmware on a Nougat device. My device will not boot up and the only inclination of the device being alive is I have HS-USB Diagnostics com port in my Device Manager.
I've been reading a lot on how to unbrick devices with the Qualcomm Snapdragon chip, it appears I need a special .mbn and .xml file for setting the partitions so I can flash new firmware. Most of the files out there are for LG or Xi, and I obviously need the HTC10.
Can anyone point me in the right direction or provide me these files pulled from a good device?
duck95 said:
I bricked my HTC 10 by loading Marshmallow firmware on a Nougat device. My device will not boot up and the only inclination of the device being alive is I have HS-USB Diagnostics com port in my Device Manager.
I've been reading a lot on how to unbrick devices with the Qualcomm Snapdragon chip, it appears I need a special .mbn and .xml file for setting the partitions so I can flash new firmware. Most of the files out there are for LG or Xi, and I obviously need the HTC10.
Can anyone point me in the right direction or provide me these files pulled from a good device?
Click to expand...
Click to collapse
Is possible for anyone to pull these files for me so I can re-partition my phone?
Related
I have hard-bricked my xperia l to the point that it shows no leds and is completely life-less.
Anyone with the proper knowledge of QPST and unbricking the device using the Qualcomm HS-USB QDLoader 9008 mode, PLEASE PM ME!!!
Urgent help required.
Thanks in Advance.
Hey find a stock rom specific for phone and flash it using pc or if u can access ur recovery mode. Hope this help or head straightaway to sony authorized centre
you can make the 8x30msmimage.mbn out of stock firmware + QPST. You can't make the hex, it is probably carrier key specific. Qualcomm bootloader signature verification strikes again.
nxb said:
you can make the 8x30msmimage.mbn out of stock firmware + QPST. You can't make the hex, it is probably carrier key specific. Qualcomm bootloader signature verification strikes again.
Click to expand...
Click to collapse
is there any guide to create mprg8226.hex and 8226msiimage.mbn
you won't be able to make the hex. look on how to create 8960 mbm its probably the same for this chip too.
Same problem here. I was just looking for a way to get atleast the fastboot and flashmode working again. Any advice?
does anyone know how to unbrick a hard-bricked zte blade g v880g? it has Qualcomm Snapdragon S4 Play (MSM8225) prossesor.
ntouris3 said:
does anyone know how to unbrick a hard-bricked zte blade g v880g? it has Qualcomm Snapdragon S4 Play (MSM8225) prossesor.
Click to expand...
Click to collapse
Thread moved to proper forum
If you can get the thing to go into fastboot (by pressing whatever button combination is appropriate for your specific device) and provided you have a backup of the partitions you damaged you can use fastboot to reflash the damaged partitions.
Google search for "[Guide] de-bricking a ZTE Blade - ZTE Blade / Libra ROMs & ROM" that will have various scenarios for debrikcing.
well... I didn't manage to get into fastboot but I managed to download a flasher! I connected my phone and it started installing things but it always stuck on ''wait reset''................................
ntouris3 said:
well... I didn't manage to get into fastboot but I managed to download a flasher! I connected my phone and it started installing things but it always stuck on ''wait reset''................................
Click to expand...
Click to collapse
Sometimes it is necessary to erase flash partitions before flashing them ... not sure if this is your issue but be warned that you could make things worse by doing so.
Can your phone start into ant of the other modes: recovery, field test or download mode ? if is can make sure you don't further damage the relevant partitions + the boot loader and whatever is used before the boot loader.
I've a snapdragon 600 based devel board and there are 2 stages of primary boot loader before LK ... not sure for your soc but make sure you don't dammage them if they are OK.
My is is hard bricked... I cant get into any mode... The only thing i can do is just to connect it to my pc ... And it is recognized as forge hs-usb qdloader 9008..... I found a program at androidbrick.com that may help but i cant use it because it is protected with a pssword that i dont know...
ntouris3 said:
My is is hard bricked... I cant get into any mode... The only thing i can do is just to connect it to my pc ... And it is recognized as forge hs-usb qdloader 9008..... I found a program at androidbrick.com that may help but i cant use it because it is protected with a pssword that i dont know...
Click to expand...
Click to collapse
I see people asking for the password on their forum ... regiter yourself there and ask for the password like the other users. If I knew it I'd give it to you
I'm not allowed to post links ... I'd point you to the url where people are asking for the password if I could.
Try searching with google : "Ultimate Qualcomm Snapdragon Unbrick Guide"
Thank you really much!
Sent from my Q8H-V1.0 using XDA Free mobile app
i need flash files for SP tool or files for MiFlash tool, for ZTE BLADE G V880G .
my phone not responding. there is not boot , recovery....
PC device menager see my phone like Qualcom HS-USB QDloader 9008 (COM5)
Thanks
sinbaj said:
i need flash files for SP tool or files for MiFlash tool, for ZTE BLADE G V880G .
my phone not responding. there is not boot , recovery....
PC device menager see my phone like Qualcom HS-USB QDloader 9008 (COM5)
Thanks
Click to expand...
Click to collapse
Mine too but i dont think you can flash via Sp tools this phone because its qualcomm not mediatek!
i used QPST and QXDM tool for unbreak the phone but i need flash files.:crying:
I find BIN file for full flash. zte_v955_full_riff.7z :angel:
which program i can use to flash with BIN file?
Im stuck there too bro
Qfil files for ZTE Blade g v880g ??
Hey guys, I recently had an accident while trying to install stock firmware on my device. I tried to manually install a stock firmware ROM and in the middle of it the device just shut of. What I'm left with is a device which doesn't have fastboot or any other method of recovery other then through some qualcomm tools. The driver shows up as "qualcomm hs-usb qdloader 9008" on my computer. I tried following this guide https://www.droidsavvy.com/unbrick-qualcomm-mobiles/ and concluded that I'm stuck on the old hard brick and tried to follow the instructions but the problem here is that I don't think that I have the correct ROM file for QFIL because the firmware are zip files and not mbn as I think they are supposed to be. If anyone could help me with this in any way I'd really appreciate it, Thank you!
same as you man did you find a solution?
jesusloortega said:
same as you man did you find a solution?
Click to expand...
Click to collapse
https://forum.xda-developers.com/mo...766-unbrick-easy-sdcard-t3833408/post77427426
Hi,
My wife's ZF3 died on saturday night, she was using it at night, next morning, it was completely dead, I have been trying to search what happened, but cant find an actual solution, when I connect it to a PC, or almost any PC (have tried 3 different) it shows as Qualcomm HS-USB QDLoader 9008...
I have downloaded the QFIL and have searched for several mbn files mostly downloaded from "Libra_QFIL_8953_...", tried with some of the partition and patch XML files I have found here, mostly downloaded from the 8675_W00 folder, and always receive the same SAHARA error...
I have some question, first would be, why did it fail by itself, I have seen some post saying they were trying to upgrade or downgrade the ROM and it crashed, that I get it, but my wife has no idea about OS and she did not certainly tried to upgrade or downgrade, so why it happened?
Second, will it work if I get the same model phone, download whatever files I need (emmc dump I think is called) and then update that to the bricked phone?
Can someone please help on this, I have barely no experience on this but want and can learn fast... I have read a lot of post from Wang1Chun and Saktis_STi but unfortunately, the later got banned and the necessary files were removed from the thread so I cant download those...
Please, any light or lead will be appreciated.
Thanks!
My Nothing Phone is hard bricked and not working.
No Fastboot Mode
No Recovery Mode
Mobile in Dead Condition.
Nothing Phone 1 Firmware do not have emmc, raw program and patch file.
I own a heavily Bricked Nothing Phone 1. Currently, I am trying to bring it back to life. It is detected as Qualcomm HS_USB QDLoader 9008 (Com3). After spending some time online, i got a possible solution, flashing it using QFIL. I downloaded the firmware, it didn't have 3 files needed to start the flash process which were raw program XML file, patch file, prog emmc file. I looked up Online for these file specifically, But found nothing. Do anyone know what should I do.
I'm interested in this too! EDL Firehose saved my butt twice already. Would be great to have a saviour after an incredible eff-up on this phone.
If I can help in any way, let me know. The QPST tools and COM driver are installed, and can put my working phone in EDL for testing.
up on this post.
me be nothing phone is nothing
my phone now restart problem all i know sulotion already try in try but the same problem
iqcuratorhub said:
My Nothing Phone is hard bricked and not working.
No Fastboot Mode
No Recovery Mode
Mobile in Dead Condition.
Nothing Phone 1 Firmware do not have emmc, raw program and patch file.
I own a heavily Bricked Nothing Phone 1. Currently, I am trying to bring it back to life. It is detected as Qualcomm HS_USB QDLoader 9008 (Com3). After spending some time online, i got a possible solution, flashing it using QFIL. I downloaded the firmware, it didn't have 3 files needed to start the flash process which were raw program XML file, patch file, prog emmc file. I looked up Online for these file specifically, But found nothing. Do anyone know what should I do.
Click to expand...
Click to collapse
QFIL file for Nothing Phone is totally different compared to ROM firmware . You can't flash it . For unbrick the phone you must have this particular QFIL file which I don't think you find it online for now .
If by any chance you find it please share .