Anyone else get these syptoms?:
the volume control on the side, when I press the up or down once, it goes to the volume slider screen. One would expect that pressing the volume up, to move it up and then down, to move the volume down right?
Well on mine; if you press the volume button once, it goes to the volume screen ok, but if you press it again, it takes you back to the previous screen without altering the volume. The same happens for both up and down buttons.
frustin said:
Anyone else get these syptoms?:
the volume control on the side, when I press the up or down once, it goes to the volume slider screen. One would expect that pressing the volume up, to move it up and then down, to move the volume down right?
Well on mine; if you press the volume button once, it goes to the volume screen ok, but if you press it again, it takes you back to the previous screen without altering the volume. The same happens for both up and down buttons.
Click to expand...
Click to collapse
As of today I have the exact same issue ! I installed sdkcerts.cab and FInixNOverBatteryIconsOnly.cab but uninstalled and the issue is still there
have you had any luck in finding out what's causing it, not overly enthusiatic about doing a hard reset which will probably be mentioned ?
I have the same issue, after installing some apps on my new Blackstone the Volume-settings feature was gone...
Any Ideas?
regards+thx
ps: please don't tell me to hard reset ;-)
I also have sdkcerts.cab and FInixNOverBatteryIconsOnly.cab installed (and many other applications), but my volume buttons work as expected. Maybe it has something to do with device lock?
Regards!
MHoefler said:
Maybe it has something to do with device lock?
Click to expand...
Click to collapse
MHoefler, thank you, nice hint!
After uninstalling S2U2 the volume buttons are working!
I am using S2U2 1.35, will looking for a new build...
regards
s2u2
i had the same issue with s2u2. after enabling the volume button within the s2u2 settings it works fine again.
needacloud said:
i had the same issue with s2u2. after enabling the volume button within the s2u2 settings it works fine again.
Click to expand...
Click to collapse
yes, just re-installed it.. same issue.. and then with setting "Volume Control = ON" it is working.
thank you
well spotted MHoefler !! all sorted now after enabling the volume in S2U, happy again
Yes, work with volume control "on" setting but, the volume control at call is locked!!
Any solution for up or down the volume at calls (with S2U2 installed)?
Regards.
You may try a hard reset.
Black Antitoon said:
You may try a hard reset.
Click to expand...
Click to collapse
Yes Black, I know that hardreset works but I wanna use S2U2.
It is clearly a bug in s2u2 and until it gets fixed there is not satisfactory solution unfortunately.
That seems. Just wait for new release.
sgbmad said:
Any solution for up or down the volume at calls (with S2U2 installed)?
Click to expand...
Click to collapse
I found the solution at the diamond-forum. You have to set "Don´t use the keyboard hook" at the S2U2-Settings to "ON" and the S2U2-Volume-Control to "OFF" -then all works perfect!!!
Thanks nick007, I'll try it.
EDIT: Yes, it works! And the hardware buttons does not pick up/ignore the calls.
thank you, but for me that doesn't work correctly: With these settings i can control the system and ring volume during a call properly, but i can't change the actual 'in-call-volume' (which means the volume how loud i can hear the other party talk)... can anyone check this?
regards jan
Yes hausen, I can change "in-call-volume".
Before you uninstall S2U2...
I had this issue as well, and suspected it had something to do with having the volume buttons captured in Mortplayer and Coreplayer. Glad to see they weren't the issue so i can keep controlling them the way i like
But be careful when getting rid of S2U2!
I had S2U2 installed as well and uninstalled it without setting the volume control, and the volume buttons remained broken! I had to install S2U2 again, activate its volume control and THEN uninstall it to get volume control back! So if you want to uninstall, be sure to fix the volume controls beforehand.
Well, it seems like i really messed it up.... My volume buttons are still broken
I get the same symptoms as described earlier (volume buttons call up the volume screen, pressing a second time does not change volume but closes the volume screen instead), but in addition i noticed pressing the volume buttons while on the volume screen actually generates up arrow/down arrow keys! You can see this on many of the manilla screens where suddenly items become selected, but in other programs as well. The volume key press that calls up the volume screen doesn't seem to generate an arrow key, or it doesn't get sent to the current program.
So a couple of things i did that could have broken it:
I remapped the volume keys in Mortplayer.
I remapped the volume keys in Coreplayer.
I had S2U2 installed.
I tried to "fix" things with AEBplus.
The symptoms are always there, even after a soft reset without having run either Mortplayer or Coreplayer. I think the system's response to the volume key has changed, and the volume keys still send volume commands because explicitly remapping the keys to volume keys with AEBplus doesn't change anything. I even tried remapping another key to generate volume commands, but that just seems to keep calling up the volume screen, even if it's already active!
So i'll be struggling with this for a while it seems.... but if anyone has any suggestions or insights.....?
I have the same problem ... DOWN volume key is not working.
The annoying thing is that if I try to soft-reset the device it works but I get into bootloader. I have to press the UP volume key and keep it pressed until HTC logo appears, or else I still get into bootloader. So, I don't know what to say, but for me at leat, it might be a hardware problem.
Another thing is that when I go to hard-reset screen, none of the buttons work. I mean is I try to press volume UP or DOWN, nothing happens. Today I succeded in hard-reseting the device but the problem still persists.
I hate this thing and I hope that somehow this problem can be solved. Good luck to everyone.
PS: I will try to get official rom, radio, and SPL on my diamond, and maybe that will clear the problem because it is annoying at least.
Hope you guys have better luck then me.
I have got SetVolume0.8.0.CAB, it's perfect. But if music play and i have got locked HD2 (for example: in my pocket), SetVolume0.8.0 not working and volume HW buttons is still 5 in steps
Is there any way to increase the number of steps in locked HD2?
Thanks and sorry for my bad english.
I'm interrested in this feature too.
It would be great if the volume steps in standby mode were 5-10% instead of current 20%.
Please.... Any solution?
It's not a GREAT solution but if you touch the volume slider instead of using the buttons, you can set it to any one of the 15 increments, so thats about 6-ish % per increment.
Sure. But that's a no go if you listen music while the device is locked...
On the lock screen (not "screen off") pressing the volume buttons brings up the volume slider if music is playing
Hello all,
I have recently done an upgrade to WM6.5 (Energy ROM) and now, when listening to music in PocketMusic 5.3.5, screen turns on by pressing the volume buttons to change volume, and the "ding" sound is played as when changing the volume manually. Also the Manila screen for changing volume is displayed and I have to cancel it. In stock WM6.1 it just changed the volume and screen stayed off. I have already tried playing with PocketMusic settings (like using system volume enabled/disabled, or key compatibility mode) and nothing helped.
I don't know if this is an issue with WM6.5 itself or with the particular ROM so I posted my question here (hopefully ok).
I liked to have the phone in my pocket and change volume just using my hand without taking the phone out. Well, those are the small annoyances that get me, but maybe someone has an idea or fix here, please? I already searched (on google and on these forums as well) but that didn't yield any results...
Mek7 said:
Hello all,
I have recently done an upgrade to WM6.5 (Energy ROM) and now, when listening to music in PocketMusic 5.3.5, screen turns on by pressing the volume buttons to change volume, and the "ding" sound is played as when changing the volume manually. Also the Manila screen for changing volume is displayed and I have to cancel it. In stock WM6.1 it just changed the volume and screen stayed off. I have already tried playing with PocketMusic settings (like using system volume enabled/disabled, or key compatibility mode) and nothing helped.
I don't know if this is an issue with WM6.5 itself or with the particular ROM so I posted my question here (hopefully ok).
I liked to have the phone in my pocket and change volume just using my hand without taking the phone out. Well, those are the small annoyances that get me, but maybe someone has an idea or fix here, please? I already searched (on google and on these forums as well) but that didn't yield any results...
Click to expand...
Click to collapse
you should try to re-mapping volume buttons with AEB Plus
Thank you for your reply.
I have installed the app but I am afraid it cannot do what I want.
I don't want to remap volume keys permanently - I still want to control the volume as it is now - but only when the screen is on. When screen is off, volume should be changed "on background" - without the ding sound and without turning the screen on. Hopefully I explained it right. Any more suggestions, please?
Hello
I have a question about Xiaomi Piston v2/2.1 buttons when using with Note 3 with stock ROM. The threads in accessories page is not giving me a specific answer. It would say all buttons will work fine.. But does that mean all the functionality of the buttons work too?
If anyone here is using can you kindly let me know if the skip function specifically work with Note 3 with any music player? Should we double/triple tap the center button or should be long press the volume keys?
I will be buying this for a friend who wants the skip feature specifically, so need to confirm this before buying.
Thank you.
Not sure if the skip function works out the box on stock rom...
What definitely works is root-install xposed framework-install wanam xposed-Tap on sound and tick skip with volume up/down
Yeah I have read about the xposed module. But not in a position to root the device.
Harsha Raj said:
Yeah I have read about the xposed module. But not in a position to root the device.
Click to expand...
Click to collapse
Take a look at "JAYS Headset Control"
https://play.google.com/store/apps/details?id=se.jays.headsetcontrol
I have the pistons and can confirm that all the buttons work. The middle button pauses, top is to increase volume and bottom is to lower volume. I'm on Effortless rom. Holding either top or bottom button just increases or lowers volume. It doesn't skip tracks.
Is there a way to double tap the + and - buttons on a 3 button headphone remote for ski[p track forward and skip track back
without root? or even with root?
I have tried 3 apps already and none of them even recognize a single press of either button
6p stock N
For changes like that at least root is needed I imagine. I use to love that feature on the phone having volume buttons to skip tracks while in my pocket at work. Some of the custom ROMs have it baked in. Don't think possible remote or headphones.