Related
Steps:
1. Download Magisk V11.1 & uninstaller
2. Root device (use @rrvuhpg root guide)
3. Download and flash Systemless SuperSU
4. Reboot and fully unroot device (don't restore stock boot image)
5. Reboot
6. Reboot into recovery
7. Flash Magisk & reboot
8. Wait for device to reboot fully (it takes a long, long time)
9. Download Magisk Manager from Play Store
10. If root is there, then you're done
Alternate Method:
1. Root Device (use @rrvuhpg root guide)
2. Download and flash Systemless SuperSU
3. Reboot and install Magisk Manager from Play Store
4. Open Magisk Manager and go onto the install tab
5. Press "detect" on the boot image location section and press "Magiskify" (I kept both advanced options unchecked)
6. Once flashed and rebooted, you're done.
Notes:
1. Rebooting after flashing Magisk takes ages, if there is a problem with booting then just flash the Magisk uninstaller. Just try to wait at least 10 minutes for the reboot after flashing Magisk, just don't crap yourself and uninstall the Magisk.
If you have questions or need help, just ask.
is this for single or dual sim XA??
caosugai said:
is this for single or dual sim XA??
Click to expand...
Click to collapse
For all XA and Ultra
rrvuhpg said:
For all XA and Ultra
Click to expand...
Click to collapse
Did it work for you then?
BadmanBristow said:
Did it work for you then?
Click to expand...
Click to collapse
No problem for me on F3112 with Magisk 11.1 and SuperSu 2.79 on 33.2.B.3.105 firmware. Only SafetyNet fail (CTS profil mismatch).
rrvuhpg said:
No problem for me on F3112 with Magisk 11.1 and SuperSu 2.79 on 33.2.B.3.105 firmware. Only SafetyNet fail (CTS profil mismatch).
Click to expand...
Click to collapse
Use MagiskSU instead, fully unroot device with SuperSU but don't restore the boot.img etc. Go to recovery and use the Magisk uninstaller then reflash Magisk 11.1 and if you unrooted, then it will install MagiskSU. It is Magisk's new official root
rrvuhpg said:
No problem for me on F3112 with Magisk 11.1 and SuperSu 2.79 on 33.2.B.3.105 firmware. Only SafetyNet fail (CTS profil mismatch).
Click to expand...
Click to collapse
Also Systemless xposed causes safety net fail and you need to activate Magisk hide in the settings as well
BadmanBristow said:
Also Systemless xposed causes safety net fail and you need to activate Magisk hide in the settings as well
Click to expand...
Click to collapse
And selinuxmode needs to be enforcing but Magisk takes care of that itself so don't worry, just double check it's enforcing, Magisk will turn it permissive itself only when needed
BadmanBristow said:
And selinuxmode needs to be enforcing but Magisk takes care of that itself so don't worry, just double check it's enforcing, Magisk will turn it permissive itself only when needed
Click to expand...
Click to collapse
Thank you for your tips but XA is not my daily phone anymore, now I have a Oneplus3 and XA is just used as test/dev unit. I hope it will help other users.
Magisk should help with maintaining root after the latest and future Xperia XA updates (most likely will work with Nougat update too)
Android Pay
does this let you use android pay
jbenitez821 said:
does this let you use android pay
Click to expand...
Click to collapse
It does, but if you use systemless xposed, you will need to disable it and then it will work.
Thank you very much for this guide.
Can't I use just Magisk installer without unrooting the rom? If I'm not wrong Magisk has is own root manager
I tryed to install Camera 60fps Recording Module but i got error the zip is stored in : intenal storage ....
Is this safety net important to have it in green to pass this CTS ? I have done method 2. Magisk manager form store and then I installed Magisk 12. In installation panel when I tap detect it detecs (auto) mmcblk. Is it all ? Does it work ?
Where can I find the Systemless SuperSU?
I have been trying to change to Magisk with this guide but it failed in the 1st method, the 2nd one gives the root with super su but i wanted to use Magisk alone, so i have been researching and by flashing the stock boot.img (i used the one provided in the thread "Stock kernels built from sources") Magisk was installed and worked except for the SafetyNet. Do someone passes SafetyNet or have a suggestion?
Veniak04 said:
I have been trying to change to Magisk with this guide but it failed in the 1st method, the 2nd one gives the root with super su but i wanted to use Magisk alone, so i have been researching and by flashing the stock boot.img (i used the one provided in the thread "Stock kernels built from sources") Magisk was installed and worked except for the SafetyNet. Do someone passes SafetyNet or have a suggestion?
Click to expand...
Click to collapse
To pass the Safetynet check the only way is to use encrypted partition but you will lose the ability to mount/backup the /data partition with TWRP.
rrvuhpg said:
To pass the Safetynet check the only way is to use encrypted partition but you will lose the ability to mount/backup the /data partition with TWRP.
Click to expand...
Click to collapse
How can i encrypt it and why does it is an issue? I only want to have my phone rooted with Magisk passing SafetyNet
:highfive:HELLO GUYS
So Here u can Find How To Bypass Safetnet In Your Phone While Being Rooted.
As you all know safetynet is implemented by Google itself to check Security of your Device & also by Some games or apps Eg. Pokeman Go,Android pay,Snapchat etc. So If Your Phone Is Rooted SafetyNet Test Will Fail.
With failed Safetynet Test You Can't Run These Apps in Your Mobile.
Check your Safetynet Status By This App:- https://play.google.com/store/apps/details?id=com.scottyab.safetynet.sample
So If your Test Failed And you can't able to run Games or Some Apps Try This method
1. Fully Unroot Your Phone In SuperSu app Go to Settings tab on the top right corner, and then click Full Unroot. Confirm with 'Continue'. 3. Once this operation is done, which takes a few minutes, you can reboot your Android & Then Flash This Unroot Script In Custom Recovery
https://forum.xda-developers.com/attachment.php?attachmentid=3931994&d=1478779893
2. Download Magisk 12.0 http://tiny.cc/latestmagisk and Flash it in Custom Recovery & Reboot **Make sure in custom recovery if a Line Appears "Boot img already patched" That means You'r Not Fully Unrooted in this case you have to flash your Stock System.img or Stock rom**
3. Now Install Magisk Manager From Play Store https://play.google.com/store/apps/details?id=com.topjohnwu.magisk
4 In Magisk manager Go To Settings Click on Enable BusyBox & Magisk Hide
5. Thats it. Now Run Safetynet test in Magisk Manager It will pass.
6.Enjoy your Games or Apps
UPDATE :- With Android Security Patch 01/04/2016 On Marshmallow Flashed SuperSu 2.79 Flashed Suhide 0.55 Flashed Magisk 12.0 Flashed Xposed 87.0 Systemless PASSING SAFETY NET Without Disabling root
Credits :-
@topjohnwu For Magisk 12.0 & Magisk Manager App
@halifax For Unroot Su Script
Hey, I have a problem:
I used this script on my Galaxy Nexus but now I decided to use SuperSU again because Magsik didn't work for me. I have just one problem: After using this script I can't install SuperSU anymore. The installation works as usual without problems but if I open the SU app it sais I need a Su file flashed. Could you please help me to fix thid problem?
Thanks in advance,
greetings Nils
yo_honey said:
:highfive:HELLO GUYS
So Here u can Find How To Bypass Safetnet In Your Phone While Being Rooted.
.....
1. Fully Unroot Your Phone In SuperSu app Go to Settings tab on the top right corner, and then click Full Unroot. Confirm with 'Continue'. 3. Once this operation is done, which takes a few minutes, you can reboot your Android & Then Flash This Unroot Script In Custom Recovery
https://forum.xda-developers.com/attachment.php?attachmentid=3931994&d=1478779893
2. Download Magisk 12.0 http://tiny.cc/latestmagisk and Flash it in Custom Recovery & Reboot **Make sure in custom recovery if a Line Appears "Boot img already patched" That means You'r Not Fully Unrooted in this case you have to flash your Stock System.img or Stock rom**
3. Now Install Magisk Manager From Play Store https://play.google.com/store/apps/details?id=com.topjohnwu.magisk
4 In Magisk manager Go To Settings Click on Enable BusyBox & Magisk Hide
5. Thats it. Now Run Safetynet test in Magisk Manager It will pass.
6.Enjoy your Games or Apps
UPDATE :- With Android Security Patch 01/04/2016 On Marshmallow Flashed SuperSu 2.79 Flashed Suhide 0.55 Flashed Magisk 12.0 Flashed Xposed 87.0 Systemless PASSING SAFETY NET Without Disabling root
Credits :-
@topjohnwu For Magisk 12.0 & Magisk Manager App
@halifax For Unroot Su Script
Click to expand...
Click to collapse
Thanks my friend, u save my day, Samsung S6 Edge +.
Flash Latest SuperSu Zip in custom recovery
MrFlashGame said:
Hey, I have a problem:
I used this script on my Galaxy Nexus but now I decided to use SuperSU again because Magsik didn't work for me. I have just one problem: After using this script I can't install SuperSU anymore. The installation works as usual without problems but if I open the SU app it sais I need a Su file flashed. Could you please help me to fix thid problem?
Thanks in advance,
greetings Nils
Click to expand...
Click to collapse
Download Latest Stable version of SuperSu zip And Flash it Using Custom Recovery. This may solve your problem.
Hello, anyone have boot img for htc 820 dual sim?
Thank you
Hello everyone,
As you might have seen, Google Safetynet APIs have been updated. Since Official Magisk is using old API, when you try to pass Safetynet, it will automatically give you an error like " The response is invalid" or something like that.
So, in order to bypass this issue, I've been searching for a long time and I found a solution.
THIS WON'T WORK WITH XPOSED FRAMEWORK INSTALLED!!
1- Uninstall completely Magisk using official uninstaller.
2- Once the device rebooted, download and install latest unofficial Magisk Manager APK available on this page: https://github.com/ianmacd/MagiskBuilds?files=1
3- Open Magisk Manager and go to Magisk settings
4- Click on Update Channel and choose Custom
5- Insert this URL and click OK : https://raw.githubusercontent.com/ianmacd/MagiskBuilds/master/updates/ianmacd.json
6- Click on Clear Repo Cache
7- Return to Magisk Startpage and check for update
8- Install Unofficial Magisk 16.8
9- Once installation done, reboot your device
10- Go to Magisk Manager and check for Safetynet
If it passed, Congratulations, you're done.
If not, continue.
11- Download this Magisk Module : https://androidfilehost.com/?fid=5862345805528046758
12- Once downloaded, disconnect your phone from Internet (turn of the Wi-Fi, 4g, etc...). It's very important
13- Install the module using Magisk Manager and reboot
14- When reboot done, wait 5 minutes before turning on Internet connection
15- Go to Magisk Manager and check if Safetynet passed.
It should be working, it worked in my case.
Have tried on two devices:
- Leeco x626 with EUI ROM ( Cuoco) using the module
- Leeco x526 with MIUI 10 without the module
FOR EUI ROMs:
You could get an error saying you're using a modified software or something like this, after uninstalling old Magisk.
Do this :
- Download official Magisk uninstaller AND Unofficial Magisk 16.8 ZIP
- Reboot to TWRP Recovery
- Uninstall old Magisk using the uninstaller
DO NOT REBOOT
- Return to TWRP Home menu and install unofficial Magisk 16.8
- Reboot your device and it should be okay
Wow it worked. Thanks a lot bro.
xwml12 said:
Hello everyone,
As you might have seen, Google Safetynet APIs have been updated. Since Official Magisk is using old API, when you try to pass Safetynet, it will automatically give you an error like " The response is invalid" or something like that.
So, in order to bypass this issue, I've been searching for a long time and I found a solution.
1- Uninstall completely Magisk using official uninstaller.
2- Once the device rebooted, download and install latest unofficial Magisk Manager APK available on this page: https://github.com/ianmacd/MagiskBuilds?files=1
3- Open Magisk Manager and go to Magisk settings
4- Click on Update Channel and choose Custom
5- Insert this URL and click OK : https://raw.githubusercontent.com/ianmacd/MagiskBuilds/master/updates/ianmacd.json
6- Click on Clear Repo Cache
7- Return to Magisk Startpage and check for update
8- Install Unofficial Magisk 16.8
9- Once installation done, reboot your device
10- Go to Magisk Manager and check for Safetynet
If it passed, Congratulations, you're done.
If not, continue.
11- Download this Magisk Module : https://androidfilehost.com/?fid=5862345805528046758
12- Once downloaded, disconnect your phone from Internet (turn of the Wi-Fi, 4g, etc...). It's very important
13- Install the module using Magisk Manager and reboot
14- When reboot done, wait 5 minutes before turning on Internet connection
15- Go to Magisk Manager and check if Safetynet passed.
It should be working, it worked in my case.
Have tried on two devices:
- Leeco x626 with EUI ROM ( Cuoco) using the module
- Leeco x526 with MIUI 10 without the module
FOR EUI ROMs:
You could get an error saying you're using a modified software or something like this, after uninstalling old Magisk.
Do this :
- Download official Magisk uninstaller AND Unofficial Magisk 16.8 ZIP
- Reboot to TWRP Recovery
- Uninstall old Magisk using the uninstaller
DO NOT REBOOT
- Return to TWRP Home menu and install unofficial Magisk 16.8
- Reboot your device and it should be okay
Click to expand...
Click to collapse
Didn't work for me. I've tried everything as stated in the instructions. I'm using an x626 and running on EUI 30s room. See what it shows from d pics below
rexmako said:
Didn't work for me. I've tried everything as stated in the instructions. I'm using an x626 and running on EUI 30s room. See what it shows from d pics below
Click to expand...
Click to collapse
Check if you don't have Xposed Framework installed, if yes uninstall it as it won't let the phone pass Safetynet check.
xwml12 said:
Check if you don't have Xposed Framework installed, if yes uninstall it as it won't let the phone pass Safetynet check.
Click to expand...
Click to collapse
I don't think I have Xposed framework, unless it's hidden somewhere in my phone. How do I check for it? I know I have some root apps installed. Apps like es explorer, root explorer and browser, BusyBox, etal
rexmako said:
I don't think I have Xposed framework, unless it's hidden somewhere in my phone. How do I check for it? I know I have some root apps installed. Apps like es explorer, root explorer and browser, BusyBox, etal
Click to expand...
Click to collapse
BusyBox... That's the problem, try without it Installed
xwml12 said:
BusyBox... That's the problem, try without it Installed
Click to expand...
Click to collapse
I just did. I've uninstalled BusyBox and still the same thing. Problem still persist. Or should I just uninstall all my root apps, including root explorer, battery fix and the rest?
After updating magisk I managed to passed safetynet check, but it still wont allow me to launch Fate/Grand Order
Dragladiator said:
After updating magisk I managed to passed safetynet check, but it still wont allow me to launch Fate/Grand Order
Click to expand...
Click to collapse
Use Magisk Hide and click on your desired apps to hide them root access.
xwml12 said:
Use Magisk Hide and click on your desired apps to hide them root access.
Click to expand...
Click to collapse
The Game is still detected Magisk even with after repacking magisk and acitve magisk hide
Dragladiator said:
The Game is still detected Magisk even with after repacking magisk and acitve magisk hide
Click to expand...
Click to collapse
In Magisk options , disable systemless hosts option and reboot .
xwml12 said:
Hello everyone,
As you might have seen, Google Safetynet APIs have been updated. Since Official Magisk is using old API, when you try to pass Safetynet, it will automatically give you an error like " The response is invalid" or something like that.
So, in order to bypass this issue, I've been searching for a long time and I found a solution.
THIS WON'T WORK WITH XPOSED FRAMEWORK INSTALLED!!
1- Uninstall completely Magisk using official uninstaller.
2- Once the device rebooted, download and install latest unofficial Magisk Manager APK available on this page: https://github.com/ianmacd/MagiskBuilds?files=1
3- Open Magisk Manager and go to Magisk settings
4- Click on Update Channel and choose Custom
5- Insert this URL and click OK : https://raw.githubusercontent.com/ianmacd/MagiskBuilds/master/updates/ianmacd.json
6- Click on Clear Repo Cache
7- Return to Magisk Startpage and check for update
8- Install Unofficial Magisk 16.8
9- Once installation done, reboot your device
10- Go to Magisk Manager and check for Safetynet
If it passed, Congratulations, you're done.
If not, continue.
11- Download this Magisk Module : https://androidfilehost.com/?fid=5862345805528046758
12- Once downloaded, disconnect your phone from Internet (turn of the Wi-Fi, 4g, etc...). It's very important
13- Install the module using Magisk Manager and reboot
14- When reboot done, wait 5 minutes before turning on Internet connection
15- Go to Magisk Manager and check if Safetynet passed.
It should be working, it worked in my case.
Have tried on two devices:
- Leeco x626 with EUI ROM ( Cuoco) using the module
- Leeco x526 with MIUI 10 without the module
FOR EUI ROMs:
You could get an error saying you're using a modified software or something like this, after uninstalling old Magisk.
Do this :
- Download official Magisk uninstaller AND Unofficial Magisk 16.8 ZIP
- Reboot to TWRP Recovery
- Uninstall old Magisk using the uninstaller
DO NOT REBOOT
- Return to TWRP Home menu and install unofficial Magisk 16.8
- Reboot your device and it should be okay
Click to expand...
Click to collapse
What if custom ROMs? How do we make them pass the check using any of the above methods?
rexmako said:
What if custom ROMs? How do we make them pass the check using any of the above methods?
Click to expand...
Click to collapse
Working on all ROMS, Custom or Stock. Just follow the guide
error installing new APK:
App not installed. The package conflcts with an existing package by the same name.
x522 Le 2, LineageOS 14.1 official nightly.
help?
EDIT: Nevermind, uninstalled with TWRP and uninstall zip, noy uninstall button in manager. oops!
EDIT2: still fails cts on unofficial 17.2 with unofficial manager 09-20. on leeco x522. help?
I've followed these instructions and success:
How to:
First of all you should have Magisk
Then you need to remove any old version of Xposed
--------------
Downlad:
https://1drv.ms/f/s!ApAcGV57xzrWhUsToUCAw0Y_LgYh
Open Magisk then flash:
1-magisk-riru-core-arm-arm64-v10.zip
2-magisk-EdXposed-arm-arm64-v x.x_beta-release.zip
Install:
XposedInstaller_by_dvdandroid_19_10_18. apk
Reboot
Done!
Tested on my Mi9 with debloated xiaomi.eu rom and additional I've installed gravitybox p and it's working with a lot of mods.
For example status bar see attached picture
thx for sharing bro
Very very nice... thanks you... It's enable and work....
You are following a tutorial from january, files could be outdated.
https://forum.xda-developers.com/mi-a1/themes/xposed-android-pie-9-0-t3891980
Just search xposed on Magisk modules, you will get detailed instructions and up to date github links.
aleksgiab said:
Very very nice... thanks you... It's enable and work....
Click to expand...
Click to collapse
May you wanna try also customiuizer
https://forum.xda-developers.com/xposed/modules/mod-customiuizer-customize-miui-rom-t3910732
It's also working for our mi9
Very nice, could you do me a favor and test, if this app Starts with xposed installed?
https://play.google.com/store/apps/details?id=com.starfinanz.mobile.android.pushtan
I need it very often and have no other phone, so if it doesn't work with xposed, sadly in can't install it
JetzNicht said:
Very nice, could you do me a favor and test, if this app Starts with xposed installed?
https://play.google.com/store/apps/details?id=com.starfinanz.mobile.android.pushtan
I need it very often and have no other phone, so if it doesn't work with xposed, sadly in can't install it
Click to expand...
Click to collapse
The app doesn't start, even with magisk hide nor with a tool for hide root. Sorry I didn't see a solution for you at the moment, but I didn't know all
Laptapper said:
The app doesn't start, even with magisk hide nor with a tool for hide root. Sorry I didn't see a solution for you at the moment, but I didn't know all
Click to expand...
Click to collapse
Thank you very much for testing.
Too bad it doesn't work, but to be honest, it's what I expected, as almost every mod seems to break this app
JetzNicht said:
Thank you very much for testing.
Too bad it doesn't work, but to be honest, it's what I expected, as almost every mod seems to break this app
Click to expand...
Click to collapse
May be it's working if you install on a non rooted device and start up normally settings in the app, then close the app, make a titanium full app backup with setting all data in titanium. Saving backup on otg disk.
Root phone, set up the phone completely, restore the app via titanium, don't start the app, choose hide the app in magisk, reboot, start app
Hi,
I've tried to install edxposed with magisk manager :
1 ) Riru Core V19.4
2 ) Reboot
3 ) Riru - EdXposed (sandhook) V0.4.5.1_beta(4463)
4 ) Reboot but bootloop
I must desactivate the Riru EdXposed module with TWRP and mm.
Does anyone encounter the same problem?
scarlaty said:
Hi,
I've tried to install edxposed with magisk manager :
1 ) Riru Core V19.4
2 ) Reboot
3 ) Riru - EdXposed (sandhook) V0.4.5.1_beta(4463)
4 ) Reboot but bootloop
I must desactivate the Riru EdXposed module with TWRP and mm.
Does anyone encounter the same problem?
Click to expand...
Click to collapse
Please follow step by step post1
No reboot after each step.
Thanks for reply.
I've tried with tour step (without reboot) but with magisk module (download from magisk) --> bootloop
Try tour step and your files --> no bootloop but not working
Between the two "way", i've remove all the module.
It works to me.
My Rom is aospextended.
scarlaty said:
Thanks for reply.
I've tried with tour step (without reboot) but with magisk module (download from magisk) --> bootloop
Try tour step and your files --> no bootloop but not working
Between the two "way", i've remove all the module.
Click to expand...
Click to collapse
scarlaty said:
Thanks for reply.
I've tried with tour step (without reboot) but with magisk module (download from magisk) --> bootloop
Try tour step and your files --> no bootloop but not working
Between the two "way", i've remove all the module.
Click to expand...
Click to collapse
afaik edxposed does not work on miui android 10 (yet?)
Please how it is with Android 10? I try steps in first post. Modules in Magisk are installed ok. But in xposed I see message, that framework is not installed. I see also message about update xposed apk, but when I try to do it, it crashes with message, that analyze of application package failed.
pavlli said:
Please how it is with Android 10? I try steps in first post. Modules in Magisk are installed ok. But in xposed I see message, that framework is not installed. I see also message about update xposed apk, but when I try to do it, it crashes with message, that analyze of application package failed.
Click to expand...
Click to collapse
Afaik only android 9
not sure if it works on chinese official rom
awaiting to unlock my device. cannot live without xposed modules
sfzz27 said:
awaiting to unlock my device. cannot live without xposed modules
Click to expand...
Click to collapse
just a quick question from someone who never used xposed. what modules are that good, you cannot live without them? just to know what I'm missing. thanks
i went from stock everything, oem unlock, fastboot install of twrp fajita, flash stock rom downloaded from oneplus, then magisk
then i was having an issue with magisk , viper audio wasnt working properly
restarted to recovery, meant to wipe dalvik but pressed something else and borked the phone.
wiped everything, re installed the twrp recovery, re flashed zip. re flashed magisk again
now, i have to turn on magisk hide ( to pass cts profile ), which is something i never had to do before and i cant find netflix on the play store.
what can i do to correct the cts profile fail please.
Use this module: Magisk Hide Props Config
It requires: BusyBox, installer in this thread first post.
To activate the module and chose your new certified fingerprint you will need a terminal emulator, you can use any one you want really, personally I use this one.
Any questions ask.
Hi
I tried this, everything went through smoothly enough but it did not resolve the issue. To be clear this is what i did.
downloaded the magiskhide props module, installed through magisk
downloaded the busybox installer , installed through magisk
restarted
opened terminal, ran command 'props'
went through the process or redoing the files for the fingerprint reader according to make and model of my phone.
restarted
disabled magiskhide in magisk
restarted
still failing cts
did i miss something
it also mentioned that i am using a custom rom, i am using a stock rom downloaded from oneplus. i have unlocked the bootloader and am rooted using magisk .
do i need to re download and start again?
OhioYJ said:
Use this module: Magisk Hide Props Config
It requires: BusyBox, installer in this thread first post.
To activate the module and chose your new certified fingerprint you will need a terminal emulator, you can use any one you want really, personally I use this one.
Any questions ask.
Click to expand...
Click to collapse
leonzon said:
disabled magiskhide in magisk
Click to expand...
Click to collapse
Why are you disabling this? You need Magisk hide enabled. I rename Magisk as well. My phone passes safetynet and CTS. On the latest version of Magisk MagiskHide is off by default, it used to be on by default. TopJohnWu announced that a while back here.
OhioYJ said:
Why are you disabling this? You need Magisk hide enabled. I rename Magisk as well. My phone passes safetynet and CTS. On the latest version of Magisk MagiskHide is off by default, it used to be on by default. TopJohnWu announced that a while back here.
Click to expand...
Click to collapse
ok , so maybe thats all this is? damn, im sorry for wasting your time. What do you mean by you rename magisk, in the app drawer? the process?
thanks
leonzon said:
ok , so maybe thats all this is? damn, im sorry for wasting your time. What do you mean by you rename magisk, in the app drawer? the process?
thanks
Click to expand...
Click to collapse
In recent versions when you choose hide and it picks a random name for the Magisk Manager app it lets choose a name for the app instead of just Manager.