Steps:
1. Download Magisk V11.1 & uninstaller
2. Root device (use @rrvuhpg root guide)
3. Download and flash Systemless SuperSU
4. Reboot and fully unroot device (don't restore stock boot image)
5. Reboot
6. Reboot into recovery
7. Flash Magisk & reboot
8. Wait for device to reboot fully (it takes a long, long time)
9. Download Magisk Manager from Play Store
10. If root is there, then you're done
Alternate Method:
1. Root Device (use @rrvuhpg root guide)
2. Download and flash Systemless SuperSU
3. Reboot and install Magisk Manager from Play Store
4. Open Magisk Manager and go onto the install tab
5. Press "detect" on the boot image location section and press "Magiskify" (I kept both advanced options unchecked)
6. Once flashed and rebooted, you're done.
Notes:
1. Rebooting after flashing Magisk takes ages, if there is a problem with booting then just flash the Magisk uninstaller. Just try to wait at least 10 minutes for the reboot after flashing Magisk, just don't crap yourself and uninstall the Magisk.
If you have questions or need help, just ask.
is this for single or dual sim XA??
caosugai said:
is this for single or dual sim XA??
Click to expand...
Click to collapse
For all XA and Ultra
rrvuhpg said:
For all XA and Ultra
Click to expand...
Click to collapse
Did it work for you then?
BadmanBristow said:
Did it work for you then?
Click to expand...
Click to collapse
No problem for me on F3112 with Magisk 11.1 and SuperSu 2.79 on 33.2.B.3.105 firmware. Only SafetyNet fail (CTS profil mismatch).
rrvuhpg said:
No problem for me on F3112 with Magisk 11.1 and SuperSu 2.79 on 33.2.B.3.105 firmware. Only SafetyNet fail (CTS profil mismatch).
Click to expand...
Click to collapse
Use MagiskSU instead, fully unroot device with SuperSU but don't restore the boot.img etc. Go to recovery and use the Magisk uninstaller then reflash Magisk 11.1 and if you unrooted, then it will install MagiskSU. It is Magisk's new official root
rrvuhpg said:
No problem for me on F3112 with Magisk 11.1 and SuperSu 2.79 on 33.2.B.3.105 firmware. Only SafetyNet fail (CTS profil mismatch).
Click to expand...
Click to collapse
Also Systemless xposed causes safety net fail and you need to activate Magisk hide in the settings as well
BadmanBristow said:
Also Systemless xposed causes safety net fail and you need to activate Magisk hide in the settings as well
Click to expand...
Click to collapse
And selinuxmode needs to be enforcing but Magisk takes care of that itself so don't worry, just double check it's enforcing, Magisk will turn it permissive itself only when needed
BadmanBristow said:
And selinuxmode needs to be enforcing but Magisk takes care of that itself so don't worry, just double check it's enforcing, Magisk will turn it permissive itself only when needed
Click to expand...
Click to collapse
Thank you for your tips but XA is not my daily phone anymore, now I have a Oneplus3 and XA is just used as test/dev unit. I hope it will help other users.
Magisk should help with maintaining root after the latest and future Xperia XA updates (most likely will work with Nougat update too)
Android Pay
does this let you use android pay
jbenitez821 said:
does this let you use android pay
Click to expand...
Click to collapse
It does, but if you use systemless xposed, you will need to disable it and then it will work.
Thank you very much for this guide.
Can't I use just Magisk installer without unrooting the rom? If I'm not wrong Magisk has is own root manager
I tryed to install Camera 60fps Recording Module but i got error the zip is stored in : intenal storage ....
Is this safety net important to have it in green to pass this CTS ? I have done method 2. Magisk manager form store and then I installed Magisk 12. In installation panel when I tap detect it detecs (auto) mmcblk. Is it all ? Does it work ?
Where can I find the Systemless SuperSU?
I have been trying to change to Magisk with this guide but it failed in the 1st method, the 2nd one gives the root with super su but i wanted to use Magisk alone, so i have been researching and by flashing the stock boot.img (i used the one provided in the thread "Stock kernels built from sources") Magisk was installed and worked except for the SafetyNet. Do someone passes SafetyNet or have a suggestion?
Veniak04 said:
I have been trying to change to Magisk with this guide but it failed in the 1st method, the 2nd one gives the root with super su but i wanted to use Magisk alone, so i have been researching and by flashing the stock boot.img (i used the one provided in the thread "Stock kernels built from sources") Magisk was installed and worked except for the SafetyNet. Do someone passes SafetyNet or have a suggestion?
Click to expand...
Click to collapse
To pass the Safetynet check the only way is to use encrypted partition but you will lose the ability to mount/backup the /data partition with TWRP.
rrvuhpg said:
To pass the Safetynet check the only way is to use encrypted partition but you will lose the ability to mount/backup the /data partition with TWRP.
Click to expand...
Click to collapse
How can i encrypt it and why does it is an issue? I only want to have my phone rooted with Magisk passing SafetyNet
Related
Magisk v8 --> I haven't tested Magisk hide settings since I am not using SuperSu and suhide, but feel free to test and report
- Added Zenfone 2 Signature
- Point to init.aosp.rc
SuperUser r277 --> Only difference I can see between this and r272 is in hidesu. Users have reported SafetyNet still doesn't pass. I note last commit on github was 4 days ago. I'll compile again if there's any new/significant updates
superuser-r277-hidesu_x86_and fixed_for_ZF2(6.0_bootloader)_by_ameel.zip
- Compiled for x86
- Fixed install scripts
- Added Zenfone 2 Signature
superuser-r277-hidesu_x86_compiled_by_ameel.zip --> This does not work on Zenfone 2 (MM bootloader). It should work for 'regular' x86 bootloaders (e.g. Zenfone 2 running official CM13 on LP bootloader). (Also note I didn't fix the install script, so it might not actually work at all. If it doesn't let me know and I'll fix it)
- Compiled for x86
SuperSu 2.78 SR1 --> works with suhide 0.54 but is very sluggish and laggy on the Zenfone 2!
- Added Zenfone 2 Signature
Xposed 86.2 for Systemless SuperSu
- Forced oat 067
SuperUser r272 --> This contains Hidesu, which is as of time of this post the only su that passes SafetyNet
- Compiled for x86
- Fixed install scripts
- Added Zenfone 2 Signature
Magisk v7
- Added Zenfone 2 Signature
- Point to init.aosp.rc
Xposed 86.6 for Magisk (by topjohnwu)
- Forced oat 067
Note:
- Installing Magisk (even without installing xposed) causes SafetyNet to fail.
- Download and use at your own risk.
Usage:
The attached zip files need to be flashed from TWRP (or similar recovery)
VERY IMPORTANT: The Correct way to install ALL 3 is as follows:
1. Flash Magisk v7 and reboot
2. Flash SuperUser r272 and reboot
3. Flash Magisk modules
If you flash SuperUser r272 first, and flash Magisk, chances are your phone won't boot anymore (I haven't investigated why and won't bother for now).
Given that Magisk v7 fails SafetyNet even with SuperUser r272's hidesu, I wouldn't bother installing the 3 together. Either install SuperUser r272 for root that passes SafetyNet, or install Magisk or Xposed with existing root solutions (i.e. not SuperUser r272).
Credits
Credits to:
- phhusson for SuperUser, and particularly his helpful replies despite my annoying requests
- topjohnwu for magisk
- rovo89 for xposed
- ???? (not sure who to attribute credits to) for Zenfone 2 signature
Click the "Thanks!" button if my files or posts are helpful.
.
Reserved (why not?)
nice that was fast!
With your supersu, we van play pokémon go thats it ? Even if i dont flash magisk?
Ty
quick05 said:
With your supersu, we van play pokémon go thats it ? Even if i dont flash magisk?
Ty
Click to expand...
Click to collapse
Yes.
ameel said:
Yes.
Click to expand...
Click to collapse
Xposed will works or need to flash yours ?
Thanks @ameel!
At least get back my root with this new supersuhide 272.
I assume your ZF2 imei issue is fixed?
hello ameel.
thanks for your work (hope you succeed to recover your phone in the process)!
I just see the SafetyNet update that fail with Magisk now (v6 or v7)
I'll test superuser while it passes safetynet. it won't last long, I presume.
quick05 said:
Xposed will works or need to flash yours ?
Click to expand...
Click to collapse
You can flash whichever xposed you want. I only provided the latest magisk version topjohnwu made, but fixed for Zenfone 2
Remember, if you install xposed, SafetyNet will fail.
chtan23 said:
Thanks @ameel!
At least get back my root with this new supersuhide 272.
I assume your ZF2 imei issue is fixed?
Click to expand...
Click to collapse
Yes, imei fixed
geek85 said:
hello ameel.
thanks for your work (hope you succeed to recover your phone in the process)!
I just see the SafetyNet update that fail with Magisk now (v6 or v7)
I'll test superuser while it passes safetynet. it won't last long, I presume.
Click to expand...
Click to collapse
yup, phone fixed! and yes, SafetyNet fails with Magisk installed (even without root installed). i'm sure topjohnwu will come up with something for Magisk, just have to wait i guess...
what about busybox with SuperUser r272 ?
can we install it? do we have to manually move the files in a custom directory?
geek85 said:
what about busybox with SuperUser r272 ?
can we install it? do we have to manually move the files in a custom directory?
Click to expand...
Click to collapse
Just installed BusyBox downloaded from playstore. Granted root and installed busybox. All working. Passed SafetyNet. yay!
boss, Now how to pokemon go + root Passed SafetyNet?
chord314 said:
boss, Now how to pokemon go + root Passed SafetyNet?
Click to expand...
Click to collapse
Flash SuperUser r272 to root and play pogo. You can't install magisk or xposed. They both cause SafetyNet to fail
ameel said:
Flash SuperUser r272 to root and play pogo. You can't install magisk or xposed. They both cause SafetyNet to fail
Click to expand...
Click to collapse
thank^^
And what if I have the phone previously rooted? Can I just flash this new superuser or should I unroot from SuperSU first?
jman0 said:
And what if I have the phone previously rooted? Can I just flash this new superuser or should I unroot from SuperSU first?
Click to expand...
Click to collapse
unroot first (maybe use the unSU script that exist elsewhere in this forum)
All this extra work just to play one game! Lol I'm glad I'm not into Pokémon Go!
Sent from my ASUS_Z00AD using Tapatalk
kenbo111 said:
All this extra work just to play one game! Lol I'm glad I'm not into Pokémon Go!
Sent from my ASUS_Z00AD using Tapatalk
Click to expand...
Click to collapse
I was wondering the same. But I believe this is also useful for repetitive OTA flashes (no need to flash eXposed, Viper, BB, etc on every flash).
agm2112 said:
I was wondering the same. But I believe this is also useful for repetitive OTA flashes (no need to flash eXposed, Viper, BB, etc on every flash).
Click to expand...
Click to collapse
Very true.
Sent from my ASUS_Z00AD using Tapatalk
Dear @ameel,
Do you have any uninstaller of superUser r272??
Or can i use that one at phh superuser thread??
Thx..
Edited :
Trying flash SuperUser r272 only.. Done..
Checked SafetyNet Helper pass with green background..
Giving TB & Root Checker root acces..
Check SafetyNet Helper, it's failed with red background..
Reboot the phone and SafetyNet Helper pass again..
It's likely i must reboot the phone after giving superuser access to an app to pass SafetyNet..
Any help??
Did i do something wrong?..
I am running NBD91K build, but every time I flash supersu, it sends my phone into a bootloop. I am running the latest TWRP and tried SuperSu 2.78 SR5. Anyone having the same problem?
dewhashish said:
I am running NBD91K build, but every time I flash supersu, it sends my phone into a bootloop. I am running the latest TWRP and tried SuperSu 2.78 SR5. Anyone having the same problem?
Click to expand...
Click to collapse
Are you using suhide by any chance?
I've been stuck at bootloop when i tried to force system (not systemless) root on nougat. So my first thought was to delete /data/.supersu... then I've managed to reinstall root systemlessly, but after a few tries it stayed on the bootloop.... I had to reflash system.img and then I flashed the supersu once again and it works like magic.
Yes, I am using suhide
dewhashish said:
Yes, I am using suhide
Click to expand...
Click to collapse
Suhide does not work with 7.0+ roms with the November security patch. You need to flash the suhide Uninstaller and just use supersu
You're right, unintalling suhide and I can boot my phone after rooting, thanks. Too bad suhide doesn't work with the november patch, otherwise I can't get android pay working.
dewhashish said:
You're right, unintalling suhide and I can boot my phone after rooting, thanks. Too bad suhide doesn't work with the november patch, otherwise I can't get android pay working.
Click to expand...
Click to collapse
did you try Magisk v9 + phh Superuser?
Android Pay works like a charm for me on 7.1.1 DP2
blank
boqonx said:
did you try Magisk v9 + phh Superuser?
Android Pay works like a charm for me on 7.1.1 DP2
Click to expand...
Click to collapse
I installed magisk manager and phh superuser, how do I get Android Pay to work with it? do I need a custom kernel?
dewhashish said:
I installed magisk manager and phh superuser, how do I get Android Pay to work with it? do I need a custom kernel?
Click to expand...
Click to collapse
Ensure that you have uninstalled SuperSU prior to flashing Magisk v9 and phh Superuser.
After, install Magisk Manager apk posted on its thread and phh Superuser manager & SafetyNet Helper from playstore.
You can then hide Magisk from SafetyNet within Magisk Manager setting. Run SafetyNet Helper to test whether you pass the SafetyNet check or not. If everything is passed, then you should be able to use Android Pay & Pokemon Go .
boqonx said:
Ensure that you have uninstalled SuperSU prior to flashing Magisk v9 and phh Superuser.
After, install Magisk Manager apk posted on its thread and phh Superuser manager & SafetyNet Helper from playstore.
You can then hide Magisk from SafetyNet within Magisk Manager setting. Run SafetyNet Helper to test whether you pass the SafetyNet check or not. If everything is passed, then you should be able to use Android Pay & Pokemon Go .
Click to expand...
Click to collapse
that worked! thank you so much for your help!
So as we all know magisk does not root nonrooted or supersu rooted devices (atleast not my devices) so here is simple method to gain MagiskSU Root access and possibly hide your root.
Note: i will use phh's superuser which was used in magisk before.
COMPATIBILITY:
ANDROID 7.x -- Not confirmed
ANDROID 6.0.1 -- Confirmedly working!
1) DOWNLOAD PHH'S SUPERUSER https://superuser.phh.me/
2) BOOT INTO RECOVERY AND FLASH DOWNLOADED ROOT ZIP AND MAGISK IF NOT FLASHED ALREADY
3) REBOOT AND ENJOY
IMAGES:
MagiskSU works just fine without flashing anything else for me
Opticuhl said:
MagiskSU works just fine without flashing anything else for me
Click to expand...
Click to collapse
Glad to hear it! For me it never did
Wizardlysense said:
So as we all know magisk does not root nonrooted or supersu rooted devices (atleast not my devices) so here is simple method to gain MagiskSU Root access and possibly hide your root.
Note: i will use phh's superuser which was used in magisk before.
COMPATIBILITY:
ANDROID 7.x -- Not confirmed
ANDROID 6.0.1 -- Confirmedly working!
1) DOWNLOAD PHH'S SUPERUSER https://superuser.phh.me/
2) BOOT INTO RECOVERY AND FLASH DOWNLOADED ROOT ZIP AND MAGISK IF NOT FLASHED ALREADY
3) REBOOT AND ENJOY
IMAGES:
Click to expand...
Click to collapse
Trying to get this working on my HTC 10 so flash the phh then v12. 0 which is now available? Does anything else need to be done??
I've downgraded to mm so I can get half life 2 to work.
Nice having xposed again.
Sent from my KFGIWI using XDA-Developers Legacy app
dladz said:
Trying to get this working on my HTC 10 so flash the phh then v12. 0 which is now available? Does anything else need to be done??
I've downgraded to mm so I can get half life 2 to work.
Nice having xposed again.
Click to expand...
Click to collapse
Flash magisk 12.0 then phh superuser
Wizardlysense said:
Flash magisk 12.0 then phh superuser
Click to expand...
Click to collapse
I have.
Will try again now.
Wizardlysense said:
Flash magisk 12.0 then phh superuser
Click to expand...
Click to collapse
Ok so this is not the correct procedure for getting Magisk to work, this is exactly how it's done in my case at least.
1. Flash a rom of your choice ( in my case it was viper rom on the HTC 10, rooted with SuperSU, I have an international unlocked device with S-Off)
2. Extract the boot.img from your ROM ( in my case it was in the root of the rom's zip file)
3. Copy the boot.img to your Fastboot folder on your computer.
4. Install Magisk Manager and download Magisk 12.0 zip to your phone.
5. Reboot to download mode and then: fastboot flash boot boot.img allow it to flash, press power to come out.
6. Without rebooting, boot to recovery and flash the Magisk 12.0 zip.
7. Reboot and check the 3 sections to see if MagiskSU has been locked in, no warning should come up when activating Magisk hide.
Done.
:highfive:HELLO GUYS
So Here u can Find How To Bypass Safetnet In Your Phone While Being Rooted.
As you all know safetynet is implemented by Google itself to check Security of your Device & also by Some games or apps Eg. Pokeman Go,Android pay,Snapchat etc. So If Your Phone Is Rooted SafetyNet Test Will Fail.
With failed Safetynet Test You Can't Run These Apps in Your Mobile.
Check your Safetynet Status By This App:- https://play.google.com/store/apps/details?id=com.scottyab.safetynet.sample
So If your Test Failed And you can't able to run Games or Some Apps Try This method
1. Fully Unroot Your Phone In SuperSu app Go to Settings tab on the top right corner, and then click Full Unroot. Confirm with 'Continue'. 3. Once this operation is done, which takes a few minutes, you can reboot your Android & Then Flash This Unroot Script In Custom Recovery
https://forum.xda-developers.com/attachment.php?attachmentid=3931994&d=1478779893
2. Download Magisk 12.0 http://tiny.cc/latestmagisk and Flash it in Custom Recovery & Reboot **Make sure in custom recovery if a Line Appears "Boot img already patched" That means You'r Not Fully Unrooted in this case you have to flash your Stock System.img or Stock rom**
3. Now Install Magisk Manager From Play Store https://play.google.com/store/apps/details?id=com.topjohnwu.magisk
4 In Magisk manager Go To Settings Click on Enable BusyBox & Magisk Hide
5. Thats it. Now Run Safetynet test in Magisk Manager It will pass.
6.Enjoy your Games or Apps
UPDATE :- With Android Security Patch 01/04/2016 On Marshmallow Flashed SuperSu 2.79 Flashed Suhide 0.55 Flashed Magisk 12.0 Flashed Xposed 87.0 Systemless PASSING SAFETY NET Without Disabling root
Credits :-
@topjohnwu For Magisk 12.0 & Magisk Manager App
@halifax For Unroot Su Script
Hey, I have a problem:
I used this script on my Galaxy Nexus but now I decided to use SuperSU again because Magsik didn't work for me. I have just one problem: After using this script I can't install SuperSU anymore. The installation works as usual without problems but if I open the SU app it sais I need a Su file flashed. Could you please help me to fix thid problem?
Thanks in advance,
greetings Nils
yo_honey said:
:highfive:HELLO GUYS
So Here u can Find How To Bypass Safetnet In Your Phone While Being Rooted.
.....
1. Fully Unroot Your Phone In SuperSu app Go to Settings tab on the top right corner, and then click Full Unroot. Confirm with 'Continue'. 3. Once this operation is done, which takes a few minutes, you can reboot your Android & Then Flash This Unroot Script In Custom Recovery
https://forum.xda-developers.com/attachment.php?attachmentid=3931994&d=1478779893
2. Download Magisk 12.0 http://tiny.cc/latestmagisk and Flash it in Custom Recovery & Reboot **Make sure in custom recovery if a Line Appears "Boot img already patched" That means You'r Not Fully Unrooted in this case you have to flash your Stock System.img or Stock rom**
3. Now Install Magisk Manager From Play Store https://play.google.com/store/apps/details?id=com.topjohnwu.magisk
4 In Magisk manager Go To Settings Click on Enable BusyBox & Magisk Hide
5. Thats it. Now Run Safetynet test in Magisk Manager It will pass.
6.Enjoy your Games or Apps
UPDATE :- With Android Security Patch 01/04/2016 On Marshmallow Flashed SuperSu 2.79 Flashed Suhide 0.55 Flashed Magisk 12.0 Flashed Xposed 87.0 Systemless PASSING SAFETY NET Without Disabling root
Credits :-
@topjohnwu For Magisk 12.0 & Magisk Manager App
@halifax For Unroot Su Script
Click to expand...
Click to collapse
Thanks my friend, u save my day, Samsung S6 Edge +.
Flash Latest SuperSu Zip in custom recovery
MrFlashGame said:
Hey, I have a problem:
I used this script on my Galaxy Nexus but now I decided to use SuperSU again because Magsik didn't work for me. I have just one problem: After using this script I can't install SuperSU anymore. The installation works as usual without problems but if I open the SU app it sais I need a Su file flashed. Could you please help me to fix thid problem?
Thanks in advance,
greetings Nils
Click to expand...
Click to collapse
Download Latest Stable version of SuperSu zip And Flash it Using Custom Recovery. This may solve your problem.
Hello, anyone have boot img for htc 820 dual sim?
Thank you
Hello everyone,
As you might have seen, Google Safetynet APIs have been updated. Since Official Magisk is using old API, when you try to pass Safetynet, it will automatically give you an error like " The response is invalid" or something like that.
So, in order to bypass this issue, I've been searching for a long time and I found a solution.
THIS WON'T WORK WITH XPOSED FRAMEWORK INSTALLED!!
1- Uninstall completely Magisk using official uninstaller.
2- Once the device rebooted, download and install latest unofficial Magisk Manager APK available on this page: https://github.com/ianmacd/MagiskBuilds?files=1
3- Open Magisk Manager and go to Magisk settings
4- Click on Update Channel and choose Custom
5- Insert this URL and click OK : https://raw.githubusercontent.com/ianmacd/MagiskBuilds/master/updates/ianmacd.json
6- Click on Clear Repo Cache
7- Return to Magisk Startpage and check for update
8- Install Unofficial Magisk 16.8
9- Once installation done, reboot your device
10- Go to Magisk Manager and check for Safetynet
If it passed, Congratulations, you're done.
If not, continue.
11- Download this Magisk Module : https://androidfilehost.com/?fid=5862345805528046758
12- Once downloaded, disconnect your phone from Internet (turn of the Wi-Fi, 4g, etc...). It's very important
13- Install the module using Magisk Manager and reboot
14- When reboot done, wait 5 minutes before turning on Internet connection
15- Go to Magisk Manager and check if Safetynet passed.
It should be working, it worked in my case.
Have tried on two devices:
- Leeco x626 with EUI ROM ( Cuoco) using the module
- Leeco x526 with MIUI 10 without the module
FOR EUI ROMs:
You could get an error saying you're using a modified software or something like this, after uninstalling old Magisk.
Do this :
- Download official Magisk uninstaller AND Unofficial Magisk 16.8 ZIP
- Reboot to TWRP Recovery
- Uninstall old Magisk using the uninstaller
DO NOT REBOOT
- Return to TWRP Home menu and install unofficial Magisk 16.8
- Reboot your device and it should be okay
Wow it worked. Thanks a lot bro.
xwml12 said:
Hello everyone,
As you might have seen, Google Safetynet APIs have been updated. Since Official Magisk is using old API, when you try to pass Safetynet, it will automatically give you an error like " The response is invalid" or something like that.
So, in order to bypass this issue, I've been searching for a long time and I found a solution.
1- Uninstall completely Magisk using official uninstaller.
2- Once the device rebooted, download and install latest unofficial Magisk Manager APK available on this page: https://github.com/ianmacd/MagiskBuilds?files=1
3- Open Magisk Manager and go to Magisk settings
4- Click on Update Channel and choose Custom
5- Insert this URL and click OK : https://raw.githubusercontent.com/ianmacd/MagiskBuilds/master/updates/ianmacd.json
6- Click on Clear Repo Cache
7- Return to Magisk Startpage and check for update
8- Install Unofficial Magisk 16.8
9- Once installation done, reboot your device
10- Go to Magisk Manager and check for Safetynet
If it passed, Congratulations, you're done.
If not, continue.
11- Download this Magisk Module : https://androidfilehost.com/?fid=5862345805528046758
12- Once downloaded, disconnect your phone from Internet (turn of the Wi-Fi, 4g, etc...). It's very important
13- Install the module using Magisk Manager and reboot
14- When reboot done, wait 5 minutes before turning on Internet connection
15- Go to Magisk Manager and check if Safetynet passed.
It should be working, it worked in my case.
Have tried on two devices:
- Leeco x626 with EUI ROM ( Cuoco) using the module
- Leeco x526 with MIUI 10 without the module
FOR EUI ROMs:
You could get an error saying you're using a modified software or something like this, after uninstalling old Magisk.
Do this :
- Download official Magisk uninstaller AND Unofficial Magisk 16.8 ZIP
- Reboot to TWRP Recovery
- Uninstall old Magisk using the uninstaller
DO NOT REBOOT
- Return to TWRP Home menu and install unofficial Magisk 16.8
- Reboot your device and it should be okay
Click to expand...
Click to collapse
Didn't work for me. I've tried everything as stated in the instructions. I'm using an x626 and running on EUI 30s room. See what it shows from d pics below
rexmako said:
Didn't work for me. I've tried everything as stated in the instructions. I'm using an x626 and running on EUI 30s room. See what it shows from d pics below
Click to expand...
Click to collapse
Check if you don't have Xposed Framework installed, if yes uninstall it as it won't let the phone pass Safetynet check.
xwml12 said:
Check if you don't have Xposed Framework installed, if yes uninstall it as it won't let the phone pass Safetynet check.
Click to expand...
Click to collapse
I don't think I have Xposed framework, unless it's hidden somewhere in my phone. How do I check for it? I know I have some root apps installed. Apps like es explorer, root explorer and browser, BusyBox, etal
rexmako said:
I don't think I have Xposed framework, unless it's hidden somewhere in my phone. How do I check for it? I know I have some root apps installed. Apps like es explorer, root explorer and browser, BusyBox, etal
Click to expand...
Click to collapse
BusyBox... That's the problem, try without it Installed
xwml12 said:
BusyBox... That's the problem, try without it Installed
Click to expand...
Click to collapse
I just did. I've uninstalled BusyBox and still the same thing. Problem still persist. Or should I just uninstall all my root apps, including root explorer, battery fix and the rest?
After updating magisk I managed to passed safetynet check, but it still wont allow me to launch Fate/Grand Order
Dragladiator said:
After updating magisk I managed to passed safetynet check, but it still wont allow me to launch Fate/Grand Order
Click to expand...
Click to collapse
Use Magisk Hide and click on your desired apps to hide them root access.
xwml12 said:
Use Magisk Hide and click on your desired apps to hide them root access.
Click to expand...
Click to collapse
The Game is still detected Magisk even with after repacking magisk and acitve magisk hide
Dragladiator said:
The Game is still detected Magisk even with after repacking magisk and acitve magisk hide
Click to expand...
Click to collapse
In Magisk options , disable systemless hosts option and reboot .
xwml12 said:
Hello everyone,
As you might have seen, Google Safetynet APIs have been updated. Since Official Magisk is using old API, when you try to pass Safetynet, it will automatically give you an error like " The response is invalid" or something like that.
So, in order to bypass this issue, I've been searching for a long time and I found a solution.
THIS WON'T WORK WITH XPOSED FRAMEWORK INSTALLED!!
1- Uninstall completely Magisk using official uninstaller.
2- Once the device rebooted, download and install latest unofficial Magisk Manager APK available on this page: https://github.com/ianmacd/MagiskBuilds?files=1
3- Open Magisk Manager and go to Magisk settings
4- Click on Update Channel and choose Custom
5- Insert this URL and click OK : https://raw.githubusercontent.com/ianmacd/MagiskBuilds/master/updates/ianmacd.json
6- Click on Clear Repo Cache
7- Return to Magisk Startpage and check for update
8- Install Unofficial Magisk 16.8
9- Once installation done, reboot your device
10- Go to Magisk Manager and check for Safetynet
If it passed, Congratulations, you're done.
If not, continue.
11- Download this Magisk Module : https://androidfilehost.com/?fid=5862345805528046758
12- Once downloaded, disconnect your phone from Internet (turn of the Wi-Fi, 4g, etc...). It's very important
13- Install the module using Magisk Manager and reboot
14- When reboot done, wait 5 minutes before turning on Internet connection
15- Go to Magisk Manager and check if Safetynet passed.
It should be working, it worked in my case.
Have tried on two devices:
- Leeco x626 with EUI ROM ( Cuoco) using the module
- Leeco x526 with MIUI 10 without the module
FOR EUI ROMs:
You could get an error saying you're using a modified software or something like this, after uninstalling old Magisk.
Do this :
- Download official Magisk uninstaller AND Unofficial Magisk 16.8 ZIP
- Reboot to TWRP Recovery
- Uninstall old Magisk using the uninstaller
DO NOT REBOOT
- Return to TWRP Home menu and install unofficial Magisk 16.8
- Reboot your device and it should be okay
Click to expand...
Click to collapse
What if custom ROMs? How do we make them pass the check using any of the above methods?
rexmako said:
What if custom ROMs? How do we make them pass the check using any of the above methods?
Click to expand...
Click to collapse
Working on all ROMS, Custom or Stock. Just follow the guide
error installing new APK:
App not installed. The package conflcts with an existing package by the same name.
x522 Le 2, LineageOS 14.1 official nightly.
help?
EDIT: Nevermind, uninstalled with TWRP and uninstall zip, noy uninstall button in manager. oops!
EDIT2: still fails cts on unofficial 17.2 with unofficial manager 09-20. on leeco x522. help?