Database Users

Moto X Pure and Magisk Support

I have installed Magisk on my XT1575, for those who dont know, its a method in which Xposed can be installed systemless, with the benefit of taking OTA's. And as a bonus, things like android pay work (with a on-the-fly toggle) to turn off root check, snapchat works, etc.
Pre-requisites (MARSHMALLOW)
1. Stock rom (this is mandated by the developer @topjohnwu ) preferably stock kernel, but i am using frankenclark
1A. TWRP (Download Link Here) https://dl.twrp.me/clark/twrp-3.0.2-0-clark.img.html
2. Magisk manager zip (Download Link Here) http://forum.xda-developers.com/devdb/project/dl/?id=19632&task=get
3. Custom superuser PHH-Superuser (Download link here) http://forum.xda-developers.com/devdb/project/dl/?id=19633&task=get
4. Custom Xposed (Download Link Here) http://forum.xda-developers.com/attachment.php?attachmentid=3832615&d=1470276932
5. Custom Superuser app from the playstore (Download Link Here) https://play.google.com/store/apps/details?id=me.phh.superuser
6. Custom Xposed Installer (Download Link Here) http://forum.xda-developers.com/devdb/project/dl/?id=19668&task=get
Steps:
1. Start with clean stock marshmallow 18-4 (i used the firmware flash and did it that way)
2. Install TWRP (1A)
3. Boot into TWRP recovery (do not select system writable. leave it stock, this ensures the chances of OTA support, unless you dont care, then set it writable)
4. Flash frankenkernel, if you want, if not continue on
5. Flash MAGISK (2)
6. FLASH custom superuser (3)
7. Flash Xposed framework (4)
8. reboot into marshamallow
9. Before opening MAGISK, install the custom superuser app from the playstore (5)
10. Install the custom XPOSED installer (6)
11. You should now see that xposed 86.3 is active
12. Profit, make sure to check MAGISK and see if the toggle between rooted and unrooted works, but it should.
MAGISK thread http://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268

Links #3 and #4 are dead.
Do I need PHH-Superuser or can I use SuperSU? It looks like I only need PHH-Superuser if I want to use android Pay.

betarepeating said:
Links #3 and #4 are dead.
Do I need PHH-Superuser or can I use SuperSU? It looks like I only need PHH-Superuser if I want to use android Pay.
Click to expand...
Click to collapse
Correct, if your not interested in the whole android pay thing. Its because i havent updated to the version 2 links yet

aer0zer0 said:
Correct, if your not interested in the whole android pay thing. Its because i havent updated to the version 2 links yet
Click to expand...
Click to collapse
What are you running for a stock, rooted systemless supersu ROM that passes safety net?

SR3TLAW said:
What are you running for a stock, rooted systemless supersu ROM that passes safety net?
Click to expand...
Click to collapse
whelp, the whole reason i had a xpure was because my 10 was getting uh oh'd for a broken display, and that took 2 weeks. When i wrote the post, magisk and phh was rollin in the regards that android pay (safetynet) had been beat, so i wrote a writeup on how to do it. Now safetynet has been upgraded to the point where magisk is beat, afaik.
Magisk screwed with my banking app, and i didnt use it for anything else, so i stuck with systemless supersu & xposed instead, no magisk on my 10.
Honestly, im not sure why people want android pay, all the places i used it, charged me extra for using, like a 1.50 pepsi cost 2.10 out of our vending machines at work.

Couldn't agree more. For the systemless root - all you did was install SuperSU from play store and run that command in twrp?
Sent from my XT1575 using Tapatalk

Titanium backup will not gain root access. Can someone help?

dkeepitabuck said:
Titanium backup will not gain root access. Can someone help?
Click to expand...
Click to collapse
Is your phone rooted?
Sent from my XT1575 using Tapatalk

Cdub1976 said:
Is your phone rooted?
Sent from my XT1575 using Tapatalk
Click to expand...
Click to collapse
I fixed it but I need help getting secure settings to work. I did something to get it working earlier but it caused TB to break.

I am running TruPureXMM ROM, can i still flash phh's superuser even though i already have SuperSU systemless root that came with the ROM?

SnowBlacks said:
I am running TruPureXMM ROM, can i still flash phh's superuser even though i already have SuperSU systemless root that came with the ROM?
Click to expand...
Click to collapse
No, Magisk is only designed for stock, unrooted roms. It doesn't get around SafetyNet anymore anyway, Android Pay, Pokémon Go, and most financial apps won't work anyway.

acejavelin said:
No, Magisk is only designed for stock, unrooted roms. It doesn't get around SafetyNet anymore anyway, Android Pay, Pok�©mon Go, and most financial apps won't work anyway.
Click to expand...
Click to collapse
Yeah, i wanna use suHide but i need magisk first. Can i just unroot and then flash phh superuser?

SnowBlacks said:
Yeah, i wanna use suHide but i need magisk first. Can i just unroot and then flash phh superuser?
Click to expand...
Click to collapse
Nandroid and try a full unroot and reboot... It might work since it's largely stock, but it doesn't work in most custom roms

Magisk 8,SuperUser r277,SuperSu 2.78 SR1,xposed 86.6(magisk),xposed 86.2 (SuperSu)

Magisk v8 --> I haven't tested Magisk hide settings since I am not using SuperSu and suhide, but feel free to test and report
- Added Zenfone 2 Signature
- Point to init.aosp.rc
SuperUser r277 --> Only difference I can see between this and r272 is in hidesu. Users have reported SafetyNet still doesn't pass. I note last commit on github was 4 days ago. I'll compile again if there's any new/significant updates
superuser-r277-hidesu_x86_and fixed_for_ZF2(6.0_bootloader)_by_ameel.zip
- Compiled for x86
- Fixed install scripts
- Added Zenfone 2 Signature
superuser-r277-hidesu_x86_compiled_by_ameel.zip --> This does not work on Zenfone 2 (MM bootloader). It should work for 'regular' x86 bootloaders (e.g. Zenfone 2 running official CM13 on LP bootloader). (Also note I didn't fix the install script, so it might not actually work at all. If it doesn't let me know and I'll fix it)
- Compiled for x86
SuperSu 2.78 SR1 --> works with suhide 0.54 but is very sluggish and laggy on the Zenfone 2!
- Added Zenfone 2 Signature
Xposed 86.2 for Systemless SuperSu
- Forced oat 067
SuperUser r272 --> This contains Hidesu, which is as of time of this post the only su that passes SafetyNet
- Compiled for x86
- Fixed install scripts
- Added Zenfone 2 Signature
Magisk v7
- Added Zenfone 2 Signature
- Point to init.aosp.rc
Xposed 86.6 for Magisk (by topjohnwu)
- Forced oat 067
Note:
- Installing Magisk (even without installing xposed) causes SafetyNet to fail.
- Download and use at your own risk.
Usage:
The attached zip files need to be flashed from TWRP (or similar recovery)
VERY IMPORTANT: The Correct way to install ALL 3 is as follows:
1. Flash Magisk v7 and reboot
2. Flash SuperUser r272 and reboot
3. Flash Magisk modules
If you flash SuperUser r272 first, and flash Magisk, chances are your phone won't boot anymore (I haven't investigated why and won't bother for now).
Given that Magisk v7 fails SafetyNet even with SuperUser r272's hidesu, I wouldn't bother installing the 3 together. Either install SuperUser r272 for root that passes SafetyNet, or install Magisk or Xposed with existing root solutions (i.e. not SuperUser r272).
Credits
Credits to:
- phhusson for SuperUser, and particularly his helpful replies despite my annoying requests
- topjohnwu for magisk
- rovo89 for xposed
- ???? (not sure who to attribute credits to) for Zenfone 2 signature
Click the "Thanks!" button if my files or posts are helpful.
.

Reserved (why not?)

nice that was fast!

With your supersu, we van play pokémon go thats it ? Even if i dont flash magisk?
Ty

quick05 said:
With your supersu, we van play pokémon go thats it ? Even if i dont flash magisk?
Ty
Click to expand...
Click to collapse
Yes.

ameel said:
Yes.
Click to expand...
Click to collapse
Xposed will works or need to flash yours ?

Thanks @ameel!
At least get back my root with this new supersuhide 272.
I assume your ZF2 imei issue is fixed?

hello ameel.
thanks for your work (hope you succeed to recover your phone in the process)!
I just see the SafetyNet update that fail with Magisk now (v6 or v7)
I'll test superuser while it passes safetynet. it won't last long, I presume.

quick05 said:
Xposed will works or need to flash yours ?
Click to expand...
Click to collapse
You can flash whichever xposed you want. I only provided the latest magisk version topjohnwu made, but fixed for Zenfone 2
Remember, if you install xposed, SafetyNet will fail.
chtan23 said:
Thanks @ameel!
At least get back my root with this new supersuhide 272.
I assume your ZF2 imei issue is fixed?
Click to expand...
Click to collapse
Yes, imei fixed
geek85 said:
hello ameel.
thanks for your work (hope you succeed to recover your phone in the process)!
I just see the SafetyNet update that fail with Magisk now (v6 or v7)
I'll test superuser while it passes safetynet. it won't last long, I presume.
Click to expand...
Click to collapse
yup, phone fixed! and yes, SafetyNet fails with Magisk installed (even without root installed). i'm sure topjohnwu will come up with something for Magisk, just have to wait i guess...

what about busybox with SuperUser r272 ?
can we install it? do we have to manually move the files in a custom directory?

geek85 said:
what about busybox with SuperUser r272 ?
can we install it? do we have to manually move the files in a custom directory?
Click to expand...
Click to collapse
Just installed BusyBox downloaded from playstore. Granted root and installed busybox. All working. Passed SafetyNet. yay!

boss, Now how to pokemon go + root Passed SafetyNet?

chord314 said:
boss, Now how to pokemon go + root Passed SafetyNet?
Click to expand...
Click to collapse
Flash SuperUser r272 to root and play pogo. You can't install magisk or xposed. They both cause SafetyNet to fail

ameel said:
Flash SuperUser r272 to root and play pogo. You can't install magisk or xposed. They both cause SafetyNet to fail
Click to expand...
Click to collapse
thank^^

And what if I have the phone previously rooted? Can I just flash this new superuser or should I unroot from SuperSU first?

jman0 said:
And what if I have the phone previously rooted? Can I just flash this new superuser or should I unroot from SuperSU first?
Click to expand...
Click to collapse
unroot first (maybe use the unSU script that exist elsewhere in this forum)

All this extra work just to play one game! Lol I'm glad I'm not into Pokémon Go!
Sent from my ASUS_Z00AD using Tapatalk

kenbo111 said:
All this extra work just to play one game! Lol I'm glad I'm not into Pokémon Go!
Sent from my ASUS_Z00AD using Tapatalk
Click to expand...
Click to collapse
I was wondering the same. But I believe this is also useful for repetitive OTA flashes (no need to flash eXposed, Viper, BB, etc on every flash).

agm2112 said:
I was wondering the same. But I believe this is also useful for repetitive OTA flashes (no need to flash eXposed, Viper, BB, etc on every flash).
Click to expand...
Click to collapse
Very true.
Sent from my ASUS_Z00AD using Tapatalk

Dear @ameel,
Do you have any uninstaller of superUser r272??
Or can i use that one at phh superuser thread??
Thx..
Edited :
Trying flash SuperUser r272 only.. Done..
Checked SafetyNet Helper pass with green background..
Giving TB & Root Checker root acces..
Check SafetyNet Helper, it's failed with red background..
Reboot the phone and SafetyNet Helper pass again..
It's likely i must reboot the phone after giving superuser access to an app to pass SafetyNet..
Any help??
Did i do something wrong?..

[GUIDE] [F3111] HOW TO Install Magisk on Xperia XA

Steps:
1. Download Magisk V11.1 & uninstaller
2. Root device (use @rrvuhpg root guide)
3. Download and flash Systemless SuperSU
4. Reboot and fully unroot device (don't restore stock boot image)
5. Reboot
6. Reboot into recovery
7. Flash Magisk & reboot
8. Wait for device to reboot fully (it takes a long, long time)
9. Download Magisk Manager from Play Store
10. If root is there, then you're done
Alternate Method:
1. Root Device (use @rrvuhpg root guide)
2. Download and flash Systemless SuperSU
3. Reboot and install Magisk Manager from Play Store
4. Open Magisk Manager and go onto the install tab
5. Press "detect" on the boot image location section and press "Magiskify" (I kept both advanced options unchecked)
6. Once flashed and rebooted, you're done.
Notes:
1. Rebooting after flashing Magisk takes ages, if there is a problem with booting then just flash the Magisk uninstaller. Just try to wait at least 10 minutes for the reboot after flashing Magisk, just don't crap yourself and uninstall the Magisk.
If you have questions or need help, just ask.

is this for single or dual sim XA??

caosugai said:
is this for single or dual sim XA??
Click to expand...
Click to collapse
For all XA and Ultra

rrvuhpg said:
For all XA and Ultra
Click to expand...
Click to collapse
Did it work for you then?

BadmanBristow said:
Did it work for you then?
Click to expand...
Click to collapse
No problem for me on F3112 with Magisk 11.1 and SuperSu 2.79 on 33.2.B.3.105 firmware. Only SafetyNet fail (CTS profil mismatch).

rrvuhpg said:
No problem for me on F3112 with Magisk 11.1 and SuperSu 2.79 on 33.2.B.3.105 firmware. Only SafetyNet fail (CTS profil mismatch).
Click to expand...
Click to collapse
Use MagiskSU instead, fully unroot device with SuperSU but don't restore the boot.img etc. Go to recovery and use the Magisk uninstaller then reflash Magisk 11.1 and if you unrooted, then it will install MagiskSU. It is Magisk's new official root

rrvuhpg said:
No problem for me on F3112 with Magisk 11.1 and SuperSu 2.79 on 33.2.B.3.105 firmware. Only SafetyNet fail (CTS profil mismatch).
Click to expand...
Click to collapse
Also Systemless xposed causes safety net fail and you need to activate Magisk hide in the settings as well

BadmanBristow said:
Also Systemless xposed causes safety net fail and you need to activate Magisk hide in the settings as well
Click to expand...
Click to collapse
And selinuxmode needs to be enforcing but Magisk takes care of that itself so don't worry, just double check it's enforcing, Magisk will turn it permissive itself only when needed

BadmanBristow said:
And selinuxmode needs to be enforcing but Magisk takes care of that itself so don't worry, just double check it's enforcing, Magisk will turn it permissive itself only when needed
Click to expand...
Click to collapse
Thank you for your tips but XA is not my daily phone anymore, now I have a Oneplus3 and XA is just used as test/dev unit. I hope it will help other users.

Magisk should help with maintaining root after the latest and future Xperia XA updates (most likely will work with Nougat update too)

Android Pay
does this let you use android pay

jbenitez821 said:
does this let you use android pay
Click to expand...
Click to collapse
It does, but if you use systemless xposed, you will need to disable it and then it will work.

Thank you very much for this guide.

Can't I use just Magisk installer without unrooting the rom? If I'm not wrong Magisk has is own root manager

I tryed to install Camera 60fps Recording Module but i got error the zip is stored in : intenal storage ....

Is this safety net important to have it in green to pass this CTS ? I have done method 2. Magisk manager form store and then I installed Magisk 12. In installation panel when I tap detect it detecs (auto) mmcblk. Is it all ? Does it work ?

Where can I find the Systemless SuperSU?

I have been trying to change to Magisk with this guide but it failed in the 1st method, the 2nd one gives the root with super su but i wanted to use Magisk alone, so i have been researching and by flashing the stock boot.img (i used the one provided in the thread "Stock kernels built from sources") Magisk was installed and worked except for the SafetyNet. Do someone passes SafetyNet or have a suggestion?

Veniak04 said:
I have been trying to change to Magisk with this guide but it failed in the 1st method, the 2nd one gives the root with super su but i wanted to use Magisk alone, so i have been researching and by flashing the stock boot.img (i used the one provided in the thread "Stock kernels built from sources") Magisk was installed and worked except for the SafetyNet. Do someone passes SafetyNet or have a suggestion?
Click to expand...
Click to collapse
To pass the Safetynet check the only way is to use encrypted partition but you will lose the ability to mount/backup the /data partition with TWRP.

rrvuhpg said:
To pass the Safetynet check the only way is to use encrypted partition but you will lose the ability to mount/backup the /data partition with TWRP.
Click to expand...
Click to collapse
How can i encrypt it and why does it is an issue? I only want to have my phone rooted with Magisk passing SafetyNet

Update[GUIDE] Bypass SafetyNet With Magisk

:highfive:HELLO GUYS
So Here u can Find How To Bypass Safetnet In Your Phone While Being Rooted.
As you all know safetynet is implemented by Google itself to check Security of your Device & also by Some games or apps Eg. Pokeman Go,Android pay,Snapchat etc. So If Your Phone Is Rooted SafetyNet Test Will Fail.
With failed Safetynet Test You Can't Run These Apps in Your Mobile.
Check your Safetynet Status By This App:- https://play.google.com/store/apps/details?id=com.scottyab.safetynet.sample
So If your Test Failed And you can't able to run Games or Some Apps Try This method
1. Fully Unroot Your Phone In SuperSu app Go to Settings tab on the top right corner, and then click Full Unroot. Confirm with 'Continue'. 3. Once this operation is done, which takes a few minutes, you can reboot your Android & Then Flash This Unroot Script In Custom Recovery
https://forum.xda-developers.com/attachment.php?attachmentid=3931994&d=1478779893
2. Download Magisk 12.0 http://tiny.cc/latestmagisk and Flash it in Custom Recovery & Reboot **Make sure in custom recovery if a Line Appears "Boot img already patched" That means You'r Not Fully Unrooted in this case you have to flash your Stock System.img or Stock rom**
3. Now Install Magisk Manager From Play Store https://play.google.com/store/apps/details?id=com.topjohnwu.magisk
4 In Magisk manager Go To Settings Click on Enable BusyBox & Magisk Hide
5. Thats it. Now Run Safetynet test in Magisk Manager It will pass.
6.Enjoy your Games or Apps
UPDATE :- With Android Security Patch 01/04/2016 On Marshmallow Flashed SuperSu 2.79 Flashed Suhide 0.55 Flashed Magisk 12.0 Flashed Xposed 87.0 Systemless PASSING SAFETY NET Without Disabling root
Credits :-
@topjohnwu For Magisk 12.0 & Magisk Manager App
@halifax For Unroot Su Script

Hey, I have a problem:
I used this script on my Galaxy Nexus but now I decided to use SuperSU again because Magsik didn't work for me. I have just one problem: After using this script I can't install SuperSU anymore. The installation works as usual without problems but if I open the SU app it sais I need a Su file flashed. Could you please help me to fix thid problem?
Thanks in advance,
greetings Nils

yo_honey said:
:highfive:HELLO GUYS
So Here u can Find How To Bypass Safetnet In Your Phone While Being Rooted.
.....
1. Fully Unroot Your Phone In SuperSu app Go to Settings tab on the top right corner, and then click Full Unroot. Confirm with 'Continue'. 3. Once this operation is done, which takes a few minutes, you can reboot your Android & Then Flash This Unroot Script In Custom Recovery
https://forum.xda-developers.com/attachment.php?attachmentid=3931994&d=1478779893
2. Download Magisk 12.0 http://tiny.cc/latestmagisk and Flash it in Custom Recovery & Reboot **Make sure in custom recovery if a Line Appears "Boot img already patched" That means You'r Not Fully Unrooted in this case you have to flash your Stock System.img or Stock rom**
3. Now Install Magisk Manager From Play Store https://play.google.com/store/apps/details?id=com.topjohnwu.magisk
4 In Magisk manager Go To Settings Click on Enable BusyBox & Magisk Hide
5. Thats it. Now Run Safetynet test in Magisk Manager It will pass.
6.Enjoy your Games or Apps
UPDATE :- With Android Security Patch 01/04/2016 On Marshmallow Flashed SuperSu 2.79 Flashed Suhide 0.55 Flashed Magisk 12.0 Flashed Xposed 87.0 Systemless PASSING SAFETY NET Without Disabling root
Credits :-
@topjohnwu For Magisk 12.0 & Magisk Manager App
@halifax For Unroot Su Script
Click to expand...
Click to collapse
Thanks my friend, u save my day, Samsung S6 Edge +.

Flash Latest SuperSu Zip in custom recovery
MrFlashGame said:
Hey, I have a problem:
I used this script on my Galaxy Nexus but now I decided to use SuperSU again because Magsik didn't work for me. I have just one problem: After using this script I can't install SuperSU anymore. The installation works as usual without problems but if I open the SU app it sais I need a Su file flashed. Could you please help me to fix thid problem?
Thanks in advance,
greetings Nils
Click to expand...
Click to collapse
Download Latest Stable version of SuperSu zip And Flash it Using Custom Recovery. This may solve your problem.

Hello, anyone have boot img for htc 820 dual sim?
Thank you

Can LOS14.1 pass safetynet?

Trying to pass safetynet to use my banks app and pokemon go, using the latest LOS14.1
I tried going the Magisk way, but it still fails CTS.
Is there anyway to make it happen with root and passing safetynet?

You have to use Magisk for root. SuperSU and LineageOS's versions of root will not pass safetynet from my experience. I don't know if it helps but I also have the Play Store and Nintendo's games enabled on Magisk Hide.

eMadman said:
You have to use Magisk for root. SuperSU and LineageOS's versions of root will not pass safetynet from my experience. I don't know if it helps but I also have the Play Store and Nintendo's games enabled on Magisk Hide.
Click to expand...
Click to collapse
I used this guide and it didn't work. Is there another MagiskSU that I'm missing?
EDIT: I got it to work! In the guide above, it says to flash SU in Systemless mode. I just flashed Magisk without SU and it worked! Thanks!

You need Magisk v12 and kernel that includes bootloader status patch. I'm using old version of AX7Kernel, but Beastmode also has it. Not sure about other ones. I'm running relatively recent build and using Android Pay pretty frequently.
@edit And make sure to enable Magisk Hide