Hi guys!
As some of you will know, Samsung have no longer allowed S-Health to work on devices where Knox has been tripped.*
This guide will show you how to get the latest version of S-Health to run without this block.
Some members and also me reported s-health for knox doesnt work on khongloi Roms but if you follow this ways you can solve this problem and deknoxed problem.
After install Rom install this zip in TWPR to change buid.prop.
I tested it only on my n920cd device on khongloi nougat s7edge ported Rom.
If you have problem tell to check it.
And also thanks to @CuBz90 (S7 edge developer)
hamidrezatata said:
Hi guys!
As some of you will know, Samsung have no longer allowed S-Health to work on devices where Knox has been tripped.*
This guide will show you how to get the latest version of S-Health to run without this block.
Some members and also me reported s-health for knox doesnt work on khongloi Roms but if you follow this ways you can solve this problem and deknoxed problem.
After install Rom install this zip in TWPR to change buid.prop.
I tested it only on my n920cd device on khongloi nougat s7edge ported Rom.
If you have problem tell to check it.
And also thanks to @CuBz90 (S7 edge developer)
Click to expand...
Click to collapse
Well Good one
Sent from my SM-G950F using Tapatalk
hamidrezatata said:
Hi guys!
As some of you will know, Samsung have no longer allowed S-Health to work on devices where Knox has been tripped.*
This guide will show you how to get the latest version of S-Health to run without this block.
Some members and also me reported s-health for knox doesnt work on khongloi Roms but if you follow this ways you can solve this problem and deknoxed problem.
After install Rom install this zip in TWPR to change buid.prop.
I tested it only on my n920cd device on khongloi nougat s7edge ported Rom.
If you have problem tell to check it.
And also thanks to @CuBz90 (S7 edge developer)
Click to expand...
Click to collapse
Probably not a good idea for prople to flash a build.prop file to other device variants(or Roms in case anyone's thinking of doing that). Could really mess things up. Not sure about Khongloi ROM either, but to fix S Health(easily), I think all you have to do is:
1) Download "build Prop Editor” from the Play Store.
2) Locate "ro.config.tima" and see if it's set to "1". If so, then just set it to "0".
Worked for Me at least. Anyhow, hope this helps. Good luck!
hamidrezatata said:
Hi guys!
As some of you will know, Samsung have no longer allowed S-Health to work on devices where Knox has been tripped.*
Click to expand...
Click to collapse
That's simply not correct as the solution is easy and the mistake to be fixed by rom builder -> see post beneath
bogarty said:
Probably not a good idea for prople to flash a build.prop file to other device variants(or Roms in case anyone's thinking of doing that). Could really mess things up. Not sure about Khongloi ROM either, but to fix S Health(easily), I think all you have to do is:
1) Download "build Prop Editor” from the Play Store.
2) Locate "ro.config.tima" and see if it's set to "1". If so, then just set it to "0".
Worked for Me at least. Anyhow, hope this helps. Good luck!
Click to expand...
Click to collapse
:good: should be given in rom thread if it isn't already there
I dont know about others but my S health is working fine without the fix, and my knox is also tripped.
P.S I am on Nougat.
sunny1119 said:
I dont know about others but my S health is working fine without the fix, and my knox is also tripped.
P.S I am on Nougat.
Click to expand...
Click to collapse
It works fine on some Roms. My current one, for instance, I didn't need to tweak anything to get it to work. My last one I had to do the build.prop fix I mentioned above.
bogarty said:
It works fine on some Roms. My current one, for instance, I didn't need to tweak anything to get it to work. My last one I had to do the build.prop fix I mentioned above.
Click to expand...
Click to collapse
Ah ok, I think it would be something with the roms, I am on official nougat.
Related
So, I was going to use Cf-Auroroot like I have for every other Samsung device I've got but apparently there's an issue with it for the N915G.
What I did was put the latest super su file (i used v2.40) on my external SD card and then in Odin flash the latest TWRP recovery from here - http://forum.xda-developers.com/note-edge/general/easy-steps-stock-odin-n915tuvu1anjl-sm-t2943993 (you can also use the sd card fix from here too, flash in TWRP, just install supersu, then add another flash file and install the sd card fix).
Go to recovery mode and flash super su.
I found it had an error flashing cache but a factory reset fixed this so best done BEFORE setting everything up.
Let phone reset, set it up and you now have root access with a clean install of stock rom.
Happy days.
This worked fine for me and left out the step of flashing CF-Autoroot which wasn't needed.
You will still trip Knox.
I don't know if this will work flawlessly for you or for all models, especially if the bootloader is locked, but theoretically it should.
Good luck guys, happy flashing.
And HAPPY NEW YEAR...:laugh:
Root for Lollipop
Thanks I have the 915g also and I used your method for Kitkat it worked flawlessly thank you I want to install lollipop now and I want to root again what method do I use and could you point me in the right direction please
jdoogzie said:
Thanks I have the 915g also and I used your method for Kitkat it worked flawlessly thank you I want to install lollipop now and I want to root again what method do I use and could you point me in the right direction please
Click to expand...
Click to collapse
Exactly the same method... I believe Twrp 2.8.5.0 and Supersu 2.4.6 were what I used to root Lollipop...
jdoogzie said:
Thanks I have the 915g also and I used your method for Kitkat it worked flawlessly thank you I want to install lollipop now and I want to root again what method do I use and could you point me in the right direction please
Click to expand...
Click to collapse
Is this for G version? Didnt work for me
pride_kr said:
Is this for G version? Didnt work for me
Click to expand...
Click to collapse
It seems to work on most variants, except those with locked bootloaders..
If it didn't I don't know why.
A lot of people have rooted their device this way....
ultramag69 said:
It seems to work on most variants, except those with locked bootloaders..
If it didn't I don't know why.
A lot of people have rooted their device this way....
Click to expand...
Click to collapse
I tried all methods described in these fóruns... Always giving fail message in Odin.... And authentication error on download mode
Try to see if you have untick the reactivation lock. Its under setting and security.
Sent from my SM-N915G using XDA Free mobile app
kuailan said:
Try to see if you have untick the reactivation lock. Its under setting and security.
Sent from my SM-N915G using XDA Free mobile app
Click to expand...
Click to collapse
Yes, it really was reactivation lock issue! Thanks!
But already went back to 4.4.4.... too many freezes, fc, on 5.0.1
pride_kr said:
Yes, it really was reactivation lock issue! Thanks!
But already went back to 4.4.4.... too many freezes, fc, on 5.0.1
Click to expand...
Click to collapse
You should not have many issues with 5.0.1. What you need to do after flashing the 5.0.1...you need to reset to factory setting. Im sure by now you know when upgrading..you still keep data from the kitkat. This may cause conflict and issues. At the moment the only issue i had is sometime i get that contact closed notifications. I have google this issue...seem like it happen to other phones to with early 5.0.1. For me im ok...cause it only happen very rarely...i hope a much later lollipop will fix this issues.
Sent from my SM-N915G using XDA Free mobile app
kuailan said:
You should not have many issues with 5.0.1. What you need to do after flashing the 5.0.1...you need to reset to factory setting. Im sure by now you know when upgrading..you still keep data from the kitkat. This may cause conflict and issues. At the moment the only issue i had is sometime i get that contact closed notifications. I have google this issue...seem like it happen to other phones to with early 5.0.1. For me im ok...cause it only happen very rarely...i hope a much later lollipop will fix this issues.
Sent from my SM-N915G using XDA Free mobile app
Click to expand...
Click to collapse
Yeah, that really makes sense... upgrading, and old data coming along... didnt think about that.... without xposed though..... not sure if Ill try it again!
I am interested in buying SM-N915G. does it have unlocked bootloader? if not, can it be unlocked? Appreciate advice.
Agent5150 said:
I am interested in buying SM-N915G. does it have unlocked bootloader? if not, can it be unlocked? Appreciate advice.
Click to expand...
Click to collapse
Aussie 915G is unlocked. As far as I know so are all others...
Mentioned locked bootloaders as this will work on other models too...
Got my SM-915G, and got it rooted and TWRP installed following you method. It is working with AT&T and I am getting LTE data speeds, but it is struggling on voice network. hardly any bars are visible on the signal strength icon.
Is there any solution?
Agent5150 said:
Got my SM-915G, and got it rooted and TWRP installed following you method. It is working with AT&T and I am getting LTE data speeds, but it is struggling on voice network. hardly any bars are visible on the signal strength icon.
Is there any solution?
Click to expand...
Click to collapse
Possibly flashing the modem and non-HLOS.bin for AT&T.
I can't really say as I live in Oz and have no problems with voice calls...
I do find that my bars don't tend to go over 3 or more than halfway but that could be due to where I live and the crappy coverage we get here... No problem with voice calls though...
I am not sure if I can install SM-N915A modem on 915G.
Can someone confirm if that is possible, if so, what version?
tell me one thing is xposed framework and freedom app now working on note edge 915G lollipop
Nope. Better stick with Kitkat if you intend to use Freedom and Xposed.
This method trips knox?
Greenarcher707 said:
This method trips knox?
Click to expand...
Click to collapse
Yes
Oh well, no way around it then. Warranty is for the timid anyway lol. Gotta pay to play.
Hello every one!!!!
i am not sure if i am posting this in the correct section, if not forgive me, but i am not sure where to post this..
SO... long story short: i went to service because i had to fix imei (which i still have to be done) so i went to pick up the phone not fixed (too expensive in that lab), and i found out there is a SERVICE FIRMWARE on it!!!
first thing i did was dumping it of course i am providing now links to it and to the kernel shipped along with..
ODIN FLASHABLE
RECOVERY FLASHABLE
note:
- both require a factory reset to start, if you do it from custom recovery you can skip format sdcard, but still need to wipe data
- odin flashable already is rooted and has su app installed by me, for the recovery one you can simply flash SuperSuUpdate.zip
most interesting stuffs are a permissive from stock kernel, there are some service apps, which unfortunately are not fixing my problem, and only allow to run tests basically, apart some really small edits to connection and usb or HW tests.. another interesting thing is that the firmware has a sort of AOSP base but need tons of work to have it fully functional.. F.e setting is "aosp" looking and works also on stock roms, but some part are FC because code is missing; launcher is basically useless, but is an "aosp" one as well
most interesting service apps are missing a connection to a tool (i believe) since it throws a popup saying :
Code:
[HMT] init failed
or
[HMT] not connected
anyone knows which could be? anyone familiar to this?
so in the end i am posting it just as general pourpose and cherrypicking of usefull apps, unless we can find what is missing so we could actually fix lots of issues!!!!
Do you have Full service mode with band selection and advanced network settings?
Legend35 said:
Do you have Full service mode with band selection and advanced network settings?
Click to expand...
Click to collapse
Yes those are the thing this firmware is intended to i think.. actually you can pull apps from the img if you know how to and use it also on stock fw.. I think i will do later and post them separately
Will this service firmware reset the knox counter aswell?
Ok thank you. Please look for advanced network setup APPs and post them ASAP, I need them very urgently
WOW, nice, i have a look asap.
dogan2010 said:
Will this service firmware reset the knox counter aswell?
Click to expand...
Click to collapse
No this is too much to ask to this fw ,unfortunately is not possible to reset on any device
Legend35 said:
Ok thank you. Please look for advanced network setup APPs and post them ASAP, I need them very urgently
Click to expand...
Click to collapse
Well if you're in rush flash the firmware and use them, or use some app like samsung secret code from play.. You'll need root for that to work properly
Wuby986 said:
Well if you're in rush flash the firmware and use them, or use some app like samsung secret code from play.. You'll need root for that to work properly
Click to expand...
Click to collapse
Knox will stay 0x0 ?
Legend35 said:
Knox will stay 0x0 ?
Click to expand...
Click to collapse
I really dunno because i had mine already tripped long before..! I think it should because they are not supposed to trip knox to fix it, but the selinux permissive kernel could give you troubles!!! Seriously !! Lots of thing may go wrong.. First of all is not out of the box compiled by samsung, but is repacked by me! So no chance it has original signature
You could try this app
https://play.google.com/store/apps/details?id=org.vndnguyen.shortcutmaster.lite
Giving root permission and try some code using method 0 (root) to launch it ex 1234567890 could be usefull for you
Wuby986 said:
Hello every one!!!!
i am not sure if i am posting this in the correct section, if not forgive me, but i am not sure where to post this..
SO... long story short: i went to service because i had to fix imei (which i still have to be done) so i went to pick up the phone not fixed (too expensive in that lab), and i found out there is a SERVICE FIRMWARE on it!!!
first thing i did was dumping it of course i am providing now links to it and to the kernel shipped along with..
ODIN FLASHABLE
RECOVERY FLASHABLE
note:
- both require a factory reset to start, if you do it from custom recovery you can skip format sdcard, but still need to wipe data
- odin flashable already is rooted and has su app installed by me, for the recovery one you can simply flash SuperSuUpdate.zip
most interesting stuffs are a permissive from stock kernel, there are some service apps, which unfortunately are not fixing my problem, and only allow to run tests basically, apart some really small edits to connection and usb or HW tests.. another interesting thing is that the firmware has a sort of AOSP base but need tons of work to have it fully functional.. F.e setting is "aosp" looking and works also on stock roms, but some part are FC because code is missing; launcher is basically useless, but is an "aosp" one as well
most interesting service apps are missing a connection to a tool (i believe) since it throws a popup saying :
Code:
[HMT] init failed
or
[HMT] not connected
anyone knows which could be? anyone familiar to this?
so in the end i am posting it just as general pourpose and cherrypicking of usefull apps, unless we can find what is missing so we could actually fix lots of issues!!!!
Click to expand...
Click to collapse
Can you mKE THIS FOR THE SPRINT 920p VERSION 5.1.1? TY.
Wuby986 said:
I really dunno because i had mine already tripped long before..! I think it should because they are not supposed to trip knox to fix it, but the selinux permissive kernel could give you troubles!!! Seriously !! Lots of thing may go wrong.. First of all is not out of the box compiled by samsung, but is repacked by me! So no chance it has original signature
You could try this app
https://play.google.com/store/apps/details?id=org.vndnguyen.shortcutmaster.lite
Giving root permission and try some code using method 0 (root) to launch it ex 1234567890 could be usefull for you
Click to expand...
Click to collapse
They dont trip knox because they would have flashed an engineering sboot to your device. you should look into dumping that if you have not updated it yet.
Mig1234 said:
Can you mKE THIS FOR THE SPRINT 920p VERSION 5.1.1? TY.
Click to expand...
Click to collapse
No i can't.. Did you even read the first post?
-Mr. X- said:
They dont trip knox because they would have flashed an engineering sboot to your device. you should look into dumping that if you have not updated it yet.
Click to expand...
Click to collapse
The thing is that when they flashed it on my device they have a compiled one with samsung original signature.. Mine is a repack so it doesn't have the original signature so it is likely that if you flash with odin you can end up with tripped knox, because bootloader doesn't read samsung sig and voids it
Wuby986 said:
No i can't.. Did you even read the first post?
The thing is that when they flashed it on my device they have a compiled one with samsung original signature.. Mine is a repack so it doesn't have the original signature so it is likely that if you flash with odin you can end up with tripped knox, because bootloader doesn't read samsung sig and voids it
Click to expand...
Click to collapse
Of course I read the post, that's why I asked the question, your post wasn't clear.
Mig1234 said:
Of course I read the post, that's why I asked the question, your post wasn't clear.
Click to expand...
Click to collapse
you didn't read well then.. I gave the phone to service and the gave me back with this fw installed.. I can't build anything, i don't work for samsung, and i stated this is for 920f bacause it is only for this
I don't live is usa, i don't have a sprint mobile phone, and i cannot make it as i didn't make this one, i just dumped it from my phone
Wuby986 said:
No i can't.. Did you even read the first post?
The thing is that when they flashed it on my device they have a compiled one with samsung original signature.. Mine is a repack so it doesn't have the original signature so it is likely that if you flash with odin you can end up with tripped knox, because bootloader doesn't read samsung sig and voids it
Click to expand...
Click to collapse
Regardless, Service firmwares always contain an engineering boot loader. as it allows them to flash what ever they need retaining the current knox state. it also unlocks the protected memory, and has a whole suite of debugging commands enabled for service utilities.
SO again i state if you have not updated this device since you got it back (eg, flashed a tar with a public sboot in it) you should consider dumping yours as its most likely an engineering one for the G920F.
-Mr. X- said:
Regardless, Service firmwares always contain an engineering boot loader. as it allows them to flash what ever they need retaining the current knox state. it also unlocks the protected memory, and has a whole suite of debugging commands enabled for service utilities.
SO again i state if you have not updated this device since you got it back (eg, flashed a tar with a public sboot in it) you should consider dumping yours as its most likely an engineering one for the G920F.
Click to expand...
Click to collapse
Damn.. i am afraid it is too late, i didn't thought at that.. What a shame..
ok
Wuby986 said:
you didn't read well then.. I gave the phone to service and the gave me back with this fw installed.. I can't build anything, i don't work for samsung, and i stated this is for 920f bacause it is only for this
I don't live is usa, i don't have a sprint mobile phone, and i cannot make it as i didn't make this one, i just dumped it from my phone
Click to expand...
Click to collapse
Got ya!
New device
Wuby986 said:
No i can't.. Did you even read the first post?
The thing is that when they flashed it on my device they have a compiled one with samsung original signature.. Mine is a repack so it doesn't have the original signature so it is likely that if you flash with odin you can end up with tripped knox, because bootloader doesn't read samsung sig and voids it
Click to expand...
Click to collapse
I just received a new device. Here's what I found out.
I tried to use a kernel (by mistake) from another carrier and when you do this, there's Samsung software that recognizes that's not a Sprint Kernel and it locks up the device. That's what was told to me.
@Wuby986 Do you have any screenshots? I would like to see the aosp stuff that includes before I install it to my phone
Thanks
t-shock said:
@Wuby986 Do you have any screenshots? I would like to see the aosp stuff that includes before I install it to my phone
Thanks
Click to expand...
Click to collapse
no sorry.. i don't have it anymore, and by now i don't have the possibility to flash it since i upgraded to 5.1.1
Hi guys!
As some of you will know, Samsung have no longer allowed S-Health to work on devices where Knox has been tripped.*
This guide will show you how to get the latest version of S-Health to run without this block.
Some members and also me reported s-health for knox doesnt work on khongloi Roms but if you follow this ways you can solve this problem and deknoxed problem.
After install Rom install this zip in TWPR to change buid.prop.
I tested it only on my n920cd device on khongloi nougat s7edge ported Rom.
If you have problem tell to check it.
And also thanks to @CuBz90 (S7 edge developer)
After flashing this swiftkey gives me a constant error even after uninstalling and reinstalling. It did fix s health though.lol
tgamble160 said:
After flashing this swiftkey gives me a constant error even after uninstalling and reinstalling. It did fix s health though.lol
Click to expand...
Click to collapse
Obviously it is s7 build.prop it is rather smart to edit it in the Rom build.prop
KatariaMax said:
Obviously it is s7 build.prop it is rather smart to edit it in the Rom build.prop
Click to expand...
Click to collapse
If it were obvious to me I wouldn't have needed to post anything. I'm not new at this, but I'm not overly educated on it either. I always appreciate when sometime helps me out, and I try to help others when I'm able. So I'm not sure what you thought being a smartass would accomplish, but thank you anyway, I figured it out a week ago. Considering I posted that 8 days ago .
Hey guys.
I'm experiencing lot of bugs on my Galaxy S7 edge dual sim.
Some applications does not work, for example S Health, Samsung Pay.
I'm also experiencing problems, wherr I can't use SIM 2 for Mobile data. After setting it up, mobile data sometimes doesn't work.
Also few functions on side panel does not work properly.
Check screenshot in attachments, there are software informations.
Do I have official ROM ?
Or what can be problem? Is TouchWiz (or Samsung experience) so unstable? Or is it just my unique case?
Thanks for any help.
Download the app Phone Info and post some screens here..
Duchynko said:
Hey guys.
I'm experiencing lot of bugs on my Galaxy S7 edge dual sim.
Some applications does not work, for example S Health, Samsung Pay.
I'm also experiencing problems, wherr I can't use SIM 2 for Mobile data. After setting it up, mobile data sometimes doesn't work.
Also few functions on side panel does not work properly.
Check screenshot in attachments, there are software informations.
Do I have official ROM ?
Or what can be problem? Is TouchWiz (or Samsung experience) so unstable? Or is it just my unique case?
Thanks for any help.
Click to expand...
Click to collapse
You seem to use nougat rom, but still in the MM bootloader.
Follow @Bart3n 's suggestions and post results here
mashardpro said:
You seem to use nougat rom, but still in the MM bootloader.
Follow @Bart3n 's suggestions and post results here
Click to expand...
Click to collapse
Bart3n said:
Download the app Phone Info and post some screens here..
Click to expand...
Click to collapse
You can check it
/sorry for double post
Have you ever worked with Odin? Because this doesn't seem right...
Bart3n said:
Have you ever worked with Odin? Because this doesn't seem right...
Click to expand...
Click to collapse
With my old S5 I did.
I bought this S7 edge from second hand, so I don't know what he did with the phone. He didn't tell me anything about installing custom ROM or something.
What should I do now?
Duchynko said:
With my old S5 I did.
I bought this S7 edge from second hand, so I don't know what he did with the phone. He didn't tell me anything about installing custom ROM or something.
What should I do now?
Click to expand...
Click to collapse
Try to update your bl and cp to nougat
mashardpro said:
Try to update your bl and cp to nougat
Click to expand...
Click to collapse
Any links & instructions please
I am not sure how to do it.
Duchynko said:
Any links & instructions please
I am not sure how to do it.
Click to expand...
Click to collapse
Look sammobile. Complete including the procedure.
mashardpro said:
Look sammobile. Complete including the procedure.
Click to expand...
Click to collapse
Thank you. So all I have to do is install the newest firmware via odin, right ?:fingers-crossed:
/And one more question. Model SM-G935FD does not have Firmware for my country. I know it is designed for Southeast Asia and India, but .. May it cause any problems for me ? Like worse GPS locking or something. I dont think so, just want to make sure
The rom you have on the phone is for the G935F or Not G935FD version.
try installing an dual rom version instead of single rom version that may solve your problem. The G935F version will work but some apps may not work properly.
So I checked everything (BL,AP,CP,CSC) but UMS and started instalation.
/everything looks good, but I will let you know later after some using
Cosmic Blue said:
The rom you have on the phone is for the G935F or Not G935FD version.
try installing an dual rom version instead of single rom version that may solve your problem. The G935F version will work but some apps may not work properly.
Click to expand...
Click to collapse
That isn´t true my friend. I had ROM for my dual sim version (G935FD), but it was marshmallow ROM. I don´t know how it´s possible, when It was showing Android 7.0. in software informations.
//edit
Everything works now !
Hi i rooted my samsung s8 (sm-g950fd) and after i wile i didnt need root any more so i falshed it with his stok rom and i get this eroor on s health & secure folder & ...
cant opened on a rotted device !!!
i want know how can i fix this ?? (samsung knox is not runnig too)
Cocoadownload said:
Hi i rooted my samsung s8 (sm-g950fd) and after i wile i didnt need root any more so i falshed it with his stok rom and i get this eroor on s health & secure folder & ...
cant opened on a rotted device !!!
i want know how can i fix this ?? (samsung knox is not runnig too)
Click to expand...
Click to collapse
Once you root you trip Knox. Afaik you can't reset it so certain apps like Samsung pay and s health will stop working. In the future there may or may not be a way to reset it.
You have to root it again and install build prop from playstore, search of a line like this ro. Config tima=1 and turn the 1 to 0 and save reboot your device and it will work
bouyhy01 said:
You have to root it again and install build prop from playstore, search of a line like this ro. Config tima=1 and turn the 1 to 0 and save reboot your device and it will work
Click to expand...
Click to collapse
i cant root agian becuse i done unroot becase some apps i have (business app) they dont work at rooted device and also there is a chance i give the phone to my brother and he is anti root persion and he heat root !!!!
if i root device then do it then unroot and after that do a factory rest this will be ok ??? app still work??? or not?
Cocoadownload said:
i cant root agian becuse i done unroot becase some apps i have (business app) they dont work at rooted device and also there is a chance i give the phone to my brother and he is anti root persion and he heat root !!!!
if i root device then do it then unroot and after that do a factory rest this will be ok ??? app still work??? or not?
Click to expand...
Click to collapse
Nope, it won't.
Even if you factory reset your phone, the Samsung Knox trip will still be there, so you'll unable to use it.
Another option would be installing custom ROM that "tricks" apps into thinking that the knox is still on, but again, some apps might not work. In my case, when I still use a S7, my samsung gift app doesn't work anymore.
Well, if you really need to get S Health, I think this is the only option.
You should have done your learning before rooting. On ALL Samsung devices for the past 3-4 years, rooting was a one-way trip to trip Knox, and the only solution around that is patching the system so it thinks you still have Knox at 0x0.
Since Knox is a single eFuse that can only be written ONCE, you can NOT undo it. And you probably just lost your warranty.
I have downgraded my S Health version to 4.8 and now it works again - with knox tripped.
I used that version: http://www.apkmirror.com/apk/samsun...ase/s-health-4-8-0-0085-android-apk-download/
Good luck
fonix232 said:
You should have done your learning before rooting. On ALL Samsung devices for the past 3-4 years, rooting was a one-way trip to trip Knox, and the only solution around that is patching the system so it thinks you still have Knox at 0x0.
Since Knox is a single eFuse that can only be written ONCE, you can NOT undo it. And you probably just lost your warranty.
Click to expand...
Click to collapse
i know a lot of thing about rooting and i always rooted all of my devices for example my last devise was samsung s7 edge (fd series) i rooted and when i want to sell it i can do unroot and enable knox agian after that every thing was working but that way dont work on my samsung s8 and my problem is after last week update my phone will restart time to time and i search about that and the solution is enable knox agian and i dont know how to do it
fonix232 said:
You should have done your learning before rooting. On ALL Samsung devices for the past 3-4 years, rooting was a one-way trip to trip Knox, and the only solution around that is patching the system so it thinks you still have Knox at 0x0.
Since Knox is a single eFuse that can only be written ONCE, you can NOT undo it. And you probably just lost your warranty.
Click to expand...
Click to collapse
i know a lot of thing about rooting and i always rooted all of my devices for example my last devise was samsung s7 edge (fd series) i rooted and when i want to sell it i can do unroot and enable knox agian after that every thing was working but that way dont work on my samsung s8 and my problem is after last week update my phone will restart time to time and i search about that and the solution is enable knox agian and i dont know how to do it
Cocoadownload said:
i know a lot of thing about rooting and i always rooted all of my devices for example my last devise was samsung s7 edge (fd series) i rooted and when i want to sell it i can do unroot and enable knox agian after that every thing was working but that way dont work on my samsung s8 and my problem is after last week update my phone will restart time to time and i search about that and the solution is enable knox agian and i dont know how to do it
Click to expand...
Click to collapse
any body know how we must do it??
Great solution
Fusseldieb said:
I have downgraded my S Health version to 4.8 and now it works again - with knox tripped.
I used that version:
Good luck
Click to expand...
Click to collapse
great solution my friend. you saved my day. thanks a lot. i installed that version started it up and even then got my update to 5.xx and still it is working great. i just bought s3 frontier and want it to work with gear. so thank you really much :good::good::good::good::good:
So the fix is to set ro.config.tima to 0. And install older version of shealth
KoalaKinG said:
great solution my friend. you saved my day. thanks a lot. i installed that version started it up and even then got my update to 5.xx and still it is working great. i just bought s3 frontier and want it to work with gear. so thank you really much :good::good::good::good::good:
Click to expand...
Click to collapse
I am not able to install 4.8 on android 7 on a note 5.
Package is damaged error message!
Help please.
Thanks!!!
G.
https://forum.xda-developers.com/s7-edge/how-to/guide-how-to-s-health-devices-knox-t3543306
---------- Post added at 04:02 PM ---------- Previous post was at 04:01 PM ----------
i used the guide installing the old apk activating it and then updating it... it's working 100%
Octoplus for samsung repair
for now, i would rather choose octoplus to repair the corresponding fault, another octoplus is a nice dealing way for samsung fault. thanks for the vipfixphone team.
fix S-Health and Apps Knox After Knox 1 trip
How To Fix S-Health And Apps Konx After Root OR Knox 1
Root Device
Install root Exloper Or any file exloper file system
Go To system
serach Buli.prob
open with editor or notpad++
serach for
ro.config.tima=1/2
change to
ro.config.tima=0
and save and repalce bulid
reboot device
I updated with odin to Oreo UK Fw .
All works well except S-Healt which claims that the phone is rooted (but I did not root and knox is 0/0) and does not start.
I tried to update S-Health but it does not work, and I can not install version 4.8 because I have this message: not installed
Unfortunately it is installed as a system app and I can only disable it and delete updates, but even so it works.
Tips?
I am having S8 G950F, my device is rooted with Magisk .. curently my phone is running renovate ice , i am using almost every day S health application without hiding the app from magisk, might because the rom is custom because on stock roms i think i couldnt open the app . But as the other guy said you can install a past version of S health
StonebridgeGr said:
.... But as the other guy said you can install a past version of S health...
Click to expand...
Click to collapse
I can't install an older S-healt version, if I try the result is: "app not installed".
I can only install a newer version.
I try Knox status checker also, and it shows 0x0.
Is very frustrating this thing.
blekmacigno said:
I can't install an older S-healt version, if I try the result is: "app not installed".
I can only install a newer version.
I try Knox status checker also, and it shows 0x0.
Is very frustrating this thing.
Click to expand...
Click to collapse
then try this guide .
http://www.**********.com/use-s-health-app-on-rooted-samsung-devices-with-tripped-knox/