Database Users

Magisk 8,SuperUser r277,SuperSu 2.78 SR1,xposed 86.6(magisk),xposed 86.2 (SuperSu)

Magisk v8 --> I haven't tested Magisk hide settings since I am not using SuperSu and suhide, but feel free to test and report
- Added Zenfone 2 Signature
- Point to init.aosp.rc
SuperUser r277 --> Only difference I can see between this and r272 is in hidesu. Users have reported SafetyNet still doesn't pass. I note last commit on github was 4 days ago. I'll compile again if there's any new/significant updates
superuser-r277-hidesu_x86_and fixed_for_ZF2(6.0_bootloader)_by_ameel.zip
- Compiled for x86
- Fixed install scripts
- Added Zenfone 2 Signature
superuser-r277-hidesu_x86_compiled_by_ameel.zip --> This does not work on Zenfone 2 (MM bootloader). It should work for 'regular' x86 bootloaders (e.g. Zenfone 2 running official CM13 on LP bootloader). (Also note I didn't fix the install script, so it might not actually work at all. If it doesn't let me know and I'll fix it)
- Compiled for x86
SuperSu 2.78 SR1 --> works with suhide 0.54 but is very sluggish and laggy on the Zenfone 2!
- Added Zenfone 2 Signature
Xposed 86.2 for Systemless SuperSu
- Forced oat 067
SuperUser r272 --> This contains Hidesu, which is as of time of this post the only su that passes SafetyNet
- Compiled for x86
- Fixed install scripts
- Added Zenfone 2 Signature
Magisk v7
- Added Zenfone 2 Signature
- Point to init.aosp.rc
Xposed 86.6 for Magisk (by topjohnwu)
- Forced oat 067
Note:
- Installing Magisk (even without installing xposed) causes SafetyNet to fail.
- Download and use at your own risk.
Usage:
The attached zip files need to be flashed from TWRP (or similar recovery)
VERY IMPORTANT: The Correct way to install ALL 3 is as follows:
1. Flash Magisk v7 and reboot
2. Flash SuperUser r272 and reboot
3. Flash Magisk modules
If you flash SuperUser r272 first, and flash Magisk, chances are your phone won't boot anymore (I haven't investigated why and won't bother for now).
Given that Magisk v7 fails SafetyNet even with SuperUser r272's hidesu, I wouldn't bother installing the 3 together. Either install SuperUser r272 for root that passes SafetyNet, or install Magisk or Xposed with existing root solutions (i.e. not SuperUser r272).
Credits
Credits to:
- phhusson for SuperUser, and particularly his helpful replies despite my annoying requests
- topjohnwu for magisk
- rovo89 for xposed
- ???? (not sure who to attribute credits to) for Zenfone 2 signature
Click the "Thanks!" button if my files or posts are helpful.
.

Reserved (why not?)

nice that was fast!

With your supersu, we van play pokémon go thats it ? Even if i dont flash magisk?
Ty

quick05 said:
With your supersu, we van play pokémon go thats it ? Even if i dont flash magisk?
Ty
Click to expand...
Click to collapse
Yes.

ameel said:
Yes.
Click to expand...
Click to collapse
Xposed will works or need to flash yours ?

Thanks @ameel!
At least get back my root with this new supersuhide 272.
I assume your ZF2 imei issue is fixed?

hello ameel.
thanks for your work (hope you succeed to recover your phone in the process)!
I just see the SafetyNet update that fail with Magisk now (v6 or v7)
I'll test superuser while it passes safetynet. it won't last long, I presume.

quick05 said:
Xposed will works or need to flash yours ?
Click to expand...
Click to collapse
You can flash whichever xposed you want. I only provided the latest magisk version topjohnwu made, but fixed for Zenfone 2
Remember, if you install xposed, SafetyNet will fail.
chtan23 said:
Thanks @ameel!
At least get back my root with this new supersuhide 272.
I assume your ZF2 imei issue is fixed?
Click to expand...
Click to collapse
Yes, imei fixed
geek85 said:
hello ameel.
thanks for your work (hope you succeed to recover your phone in the process)!
I just see the SafetyNet update that fail with Magisk now (v6 or v7)
I'll test superuser while it passes safetynet. it won't last long, I presume.
Click to expand...
Click to collapse
yup, phone fixed! and yes, SafetyNet fails with Magisk installed (even without root installed). i'm sure topjohnwu will come up with something for Magisk, just have to wait i guess...

what about busybox with SuperUser r272 ?
can we install it? do we have to manually move the files in a custom directory?

geek85 said:
what about busybox with SuperUser r272 ?
can we install it? do we have to manually move the files in a custom directory?
Click to expand...
Click to collapse
Just installed BusyBox downloaded from playstore. Granted root and installed busybox. All working. Passed SafetyNet. yay!

boss, Now how to pokemon go + root Passed SafetyNet?

chord314 said:
boss, Now how to pokemon go + root Passed SafetyNet?
Click to expand...
Click to collapse
Flash SuperUser r272 to root and play pogo. You can't install magisk or xposed. They both cause SafetyNet to fail

ameel said:
Flash SuperUser r272 to root and play pogo. You can't install magisk or xposed. They both cause SafetyNet to fail
Click to expand...
Click to collapse
thank^^

And what if I have the phone previously rooted? Can I just flash this new superuser or should I unroot from SuperSU first?

jman0 said:
And what if I have the phone previously rooted? Can I just flash this new superuser or should I unroot from SuperSU first?
Click to expand...
Click to collapse
unroot first (maybe use the unSU script that exist elsewhere in this forum)

All this extra work just to play one game! Lol I'm glad I'm not into Pokémon Go!
Sent from my ASUS_Z00AD using Tapatalk

kenbo111 said:
All this extra work just to play one game! Lol I'm glad I'm not into Pokémon Go!
Sent from my ASUS_Z00AD using Tapatalk
Click to expand...
Click to collapse
I was wondering the same. But I believe this is also useful for repetitive OTA flashes (no need to flash eXposed, Viper, BB, etc on every flash).

agm2112 said:
I was wondering the same. But I believe this is also useful for repetitive OTA flashes (no need to flash eXposed, Viper, BB, etc on every flash).
Click to expand...
Click to collapse
Very true.
Sent from my ASUS_Z00AD using Tapatalk

Dear @ameel,
Do you have any uninstaller of superUser r272??
Or can i use that one at phh superuser thread??
Thx..
Edited :
Trying flash SuperUser r272 only.. Done..
Checked SafetyNet Helper pass with green background..
Giving TB & Root Checker root acces..
Check SafetyNet Helper, it's failed with red background..
Reboot the phone and SafetyNet Helper pass again..
It's likely i must reboot the phone after giving superuser access to an app to pass SafetyNet..
Any help??
Did i do something wrong?..

Trying to root NBD91K sends the phone into a bootloop

I am running NBD91K build, but every time I flash supersu, it sends my phone into a bootloop. I am running the latest TWRP and tried SuperSu 2.78 SR5. Anyone having the same problem?

dewhashish said:
I am running NBD91K build, but every time I flash supersu, it sends my phone into a bootloop. I am running the latest TWRP and tried SuperSu 2.78 SR5. Anyone having the same problem?
Click to expand...
Click to collapse
Are you using suhide by any chance?

I've been stuck at bootloop when i tried to force system (not systemless) root on nougat. So my first thought was to delete /data/.supersu... then I've managed to reinstall root systemlessly, but after a few tries it stayed on the bootloop.... I had to reflash system.img and then I flashed the supersu once again and it works like magic.

Yes, I am using suhide

dewhashish said:
Yes, I am using suhide
Click to expand...
Click to collapse
Suhide does not work with 7.0+ roms with the November security patch. You need to flash the suhide Uninstaller and just use supersu

You're right, unintalling suhide and I can boot my phone after rooting, thanks. Too bad suhide doesn't work with the november patch, otherwise I can't get android pay working.

dewhashish said:
You're right, unintalling suhide and I can boot my phone after rooting, thanks. Too bad suhide doesn't work with the november patch, otherwise I can't get android pay working.
Click to expand...
Click to collapse
did you try Magisk v9 + phh Superuser?
Android Pay works like a charm for me on 7.1.1 DP2

blank

boqonx said:
did you try Magisk v9 + phh Superuser?
Android Pay works like a charm for me on 7.1.1 DP2
Click to expand...
Click to collapse
I installed magisk manager and phh superuser, how do I get Android Pay to work with it? do I need a custom kernel?

dewhashish said:
I installed magisk manager and phh superuser, how do I get Android Pay to work with it? do I need a custom kernel?
Click to expand...
Click to collapse
Ensure that you have uninstalled SuperSU prior to flashing Magisk v9 and phh Superuser.
After, install Magisk Manager apk posted on its thread and phh Superuser manager & SafetyNet Helper from playstore.
You can then hide Magisk from SafetyNet within Magisk Manager setting. Run SafetyNet Helper to test whether you pass the SafetyNet check or not. If everything is passed, then you should be able to use Android Pay & Pokemon Go .

boqonx said:
Ensure that you have uninstalled SuperSU prior to flashing Magisk v9 and phh Superuser.
After, install Magisk Manager apk posted on its thread and phh Superuser manager & SafetyNet Helper from playstore.
You can then hide Magisk from SafetyNet within Magisk Manager setting. Run SafetyNet Helper to test whether you pass the SafetyNet check or not. If everything is passed, then you should be able to use Android Pay & Pokemon Go .
Click to expand...
Click to collapse
that worked! thank you so much for your help!

Magisk v11.6 compatible with Droid Turbo Stock ROM

I can confirm that Magisk v11.6 installs and appears to function perfectly on my stock, unrooted, bootloader unlocked MCG24.251-5-5 device. Also, MagiskHide is not enabled by default, so keep this in mind if you're using a work device or any other situation where you might get in trouble for failing safetynet. That's all I know so far.
Go forth and Magisk!!!
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445

Pics or it didn't happen

And last, but certainly not least...

So I can root without unlocking the bootloader using sunshine?

Sparksys said:
So I can root without unlocking the bootloader using sunshine?
Click to expand...
Click to collapse
No.

Sparksys said:
So I can root without unlocking the bootloader using sunshine?
Click to expand...
Click to collapse
No. Sunshine unlocks your bootloader, so you can then root.

Sparksys said:
So I can root without unlocking the bootloader using sunshine?
Click to expand...
Click to collapse
There will never be a free root for this device unless you develop it, so you can save yourself the time asking in so many different threads.

Can anyone tell me where you get the "magiskSU" app from I can't find it in that thread.

Tokogon said:
Can anyone tell me where you get the "magiskSU" app from I can't find it in that thread.
Click to expand...
Click to collapse
MagicSU is included with the Magisk package. You can enable or disable it using the Magisk Manager app once it is installed.

TheSt33v said:
MagicSU is included with the Magisk package. You can enable or disable it using the Magisk Manager app once it is installed.
Click to expand...
Click to collapse
Do you have a screenshot of where I can find it in settings? I've been searching for an hour and I've reset my phone twice and installed it but can't see it lol.
I want to play Pokemon Go so bad again.

Tokogon said:
Do you have a screenshot of where I can find it in settings? I've been searching for an hour and I've reset my phone twice and installed it but can't see it lol.
I want to play Pokemon Go so bad again.
Click to expand...
Click to collapse
Sorry, I was wrong about being able to disable it. There doesn't seem to be an option for that. But as long as Magisk Hide is enabled, Pokémon Go works fine for me.

More complicated question:
If I'm rooted via Computerfreek's debloated stock ROM, is there any point to running Magisk--and if so, how would I switch from SuperSU to MagicSU

y8s said:
More complicated question:
If I'm rooted via Computerfreek's debloated stock ROM, is there any point to running Magisk--and if so, how would I switch from SuperSU to MagicSU
Click to expand...
Click to collapse
The only advantage gained would be the ability to pass safetynet/use Android Pay/play pokemon go while rooted. To switch, uninstall SuperSU by selecting the full unroot option in the SuperSU app, then flash Magisk.

TheSt33v said:
The only advantage gained would be the ability to pass safetynet/use Android Pay/play pokemon go while rooted. To switch, uninstall SuperSU by selecting the full unroot option in the SuperSU app, then flash Magisk.
Click to expand...
Click to collapse
It's mostly for intellectual curiosity and maybe android pay.
But it didn't work--at least how I went about it.
I went into SuperSU and did a full unroot but did not restore the boot image (should I have?)
Then downloaded and flashed the latest 11.6 magisk
When the phone came back up, SU was gone but Magisk didn't re-root it. There were no options to do so.
Tried a second time and wiped caches but no change.
I'm going to go out on a limb and guess that Magisk needs the OG boot image to work properly?

y8s said:
It's mostly for intellectual curiosity and maybe android pay.
But it didn't work--at least how I went about it.
I went into SuperSU and did a full unroot but did not restore the boot image (should I have?)
Then downloaded and flashed the latest 11.6 magisk
When the phone came back up, SU was gone but Magisk didn't re-root it. There were no options to do so.
Tried a second time and wiped caches but no change.
I'm going to go out on a limb and guess that Magisk needs the OG boot image to work properly?
Click to expand...
Click to collapse
I installed it on stock MCG24.251-5-5 and Superuser is an option that appears in Magisk Manager. Yes, you should probably have the stock boot image before installing Magisk. I think the Magisk installer is designed to detect existing installations of SuperSU and not install its own superuser if it's detected, so if the full unroot didn't clean itself up properly for whatever reason, that might be why it didn't install with superuser.

It says:
...
-(Recommended) Restore your boot image back to stock
-Download the latest Magisk zip file
-If you choose to use SuperSU (only support Android 6.0+), first flash SuperSU in systemless mode
...
Which zip of super su should I flash therefore before flashing magisk zip?
I am currently, after restoring a backup, running your MGC stock with stock kernel, but I try installing bhb27s kernel now.
Ultimately I simply want to hide root+xPosed against my banking app...
€DIT: Wait, so SuperSUB may not be necessary, but is it safe to install magisk over bhb27s kernel?
I would do the following:
-Install newest v44 kernel from March, 12
-Reboot and look if Wi-Fi still works ...
-install Magisk 11.6
-Check if phone still works
-then install a working xposed
-Check if everything works
Is that correct or should I use another kernel version? I don't want another bootloop or damaged wifi^^

Einheit-101 said:
It says:
...
-(Recommended) Restore your boot image back to stock
-Download the latest Magisk zip file
-If you choose to use SuperSU (only support Android 6.0+), first flash SuperSU in systemless mode
...
Which zip of super su should I flash therefore before flashing magisk zip?
I am currently, after restoring a backup, running your MGC stock with stock kernel, but I try installing bhb27s kernel now.
Ultimately I simply want to hide root+xPosed against my banking app...
€DIT: Wait, so SuperSUB may not be necessary, but is it safe to install magisk over bhb27s kernel?
I would do the following:
-Install newest v44 kernel from March, 12
-Reboot and look if Wi-Fi still works ...
-install Magisk 11.6
-Check if phone still works
-then install a working xposed
-Check if everything works
Click to expand...
Click to collapse
I don't see any problems with that plan, but you should know that xposed will insta-fail safetynet. If you want to hide modifications from anything that uses safetynet, xposed in any form is not an option. The only thing that works for me is Magisk 11.6's built in root, no xposed, no other modifications. With that, I can use Android Pay, Pokemon Go and my banking apps just fine as long as Magisk Hide is turned on. Android Pay and PoGo are blocked by default, but you need to make sure to go in and manually check the box next to every other app that you want to hide stuff from.
Also, if you insist on using SuperSU instead of the built in Magisk root (why???), you will also have to install the latest version of suhide (and I'm not positive that works anymore).

.I did not exactly know Super SU is just an option so I will not install it. Wish me luck
Also I hope there will be a way to hide xPosed however my banking app does not use SafetyNet, there is still hope, I don't care about Pokemon Go.
€DIT::: Everything working perfect - however safetynet fails when checking with Magisks own test. I guess it detects the Bootloader?
€DIT2::: Now after another reboot safetynet is successfully bypassed. My banking app still doesn't work - looks like they found a way that is even better than safetynet.

I just haven't had time to dig up another boot.img and flash it. I might revert back to SuperSU and come back to this later.

Einheit-101 said:
.I did not exactly know Super SU is just an option so I will not install it. Wish me luck
Also I hope there will be a way to hide xPosed however my banking app does not use SafetyNet, there is still hope, I don't care about Pokemon Go.
€DIT::: Everything working perfect - however safetynet fails when checking with Magisks own test. I guess it detects the Bootloader?
€DIT2::: Now after another reboot safetynet is successfully bypassed. My banking app still doesn't work - looks like they found a way that is even better than safetynet.
Click to expand...
Click to collapse
Try clearing the data for your banking app. Maybe it's set up so that once it fails, it never checks again. Also, clear cache/dalvik cache in TWRP if you haven't already. Also also, did you remember to block the banking app in magisk hide?

Problem with Magisk

Hello. I have recently installed RocateX v6 and I'm trying to get ViperFX to work. Magisk Manager says magisk is installed, phone is rooted, but I can't install modules, even in TWRP, which says Magisk isn't installed. Any ideas?
VNS-L21C432B380

try to update magisk ,maybe it will work
Sent from my HUAWEI VNS-L31 using Tapatalk

simo255 said:
try to update magisk ,maybe it will work
Click to expand...
Click to collapse
Updated, now it works, thanks!

bujor.paul said:
Hello. I have recently installed RocateX v6 and I'm trying to get ViperFX to work. Magisk Manager says magisk is installed, phone is rooted, but I can't install modules, even in TWRP, which says Magisk isn't installed. Any ideas?
VNS-L21C432B380
Click to expand...
Click to collapse
Hello, could you tell me how to install magisk, I want to install it and I have doubts about how to make it functional, thanks

camiloppppp said:
Hello, could you tell me how to install magisk, I want to install it and I have doubts about how to make it functional, thanks
Click to expand...
Click to collapse
Magisk should come with rocatex

cts profile fail

i went from stock everything, oem unlock, fastboot install of twrp fajita, flash stock rom downloaded from oneplus, then magisk
then i was having an issue with magisk , viper audio wasnt working properly
restarted to recovery, meant to wipe dalvik but pressed something else and borked the phone.
wiped everything, re installed the twrp recovery, re flashed zip. re flashed magisk again
now, i have to turn on magisk hide ( to pass cts profile ), which is something i never had to do before and i cant find netflix on the play store.
what can i do to correct the cts profile fail please.

Use this module: Magisk Hide Props Config
It requires: BusyBox, installer in this thread first post.
To activate the module and chose your new certified fingerprint you will need a terminal emulator, you can use any one you want really, personally I use this one.
Any questions ask.

Hi
I tried this, everything went through smoothly enough but it did not resolve the issue. To be clear this is what i did.
downloaded the magiskhide props module, installed through magisk
downloaded the busybox installer , installed through magisk
restarted
opened terminal, ran command 'props'
went through the process or redoing the files for the fingerprint reader according to make and model of my phone.
restarted
disabled magiskhide in magisk
restarted
still failing cts
did i miss something
it also mentioned that i am using a custom rom, i am using a stock rom downloaded from oneplus. i have unlocked the bootloader and am rooted using magisk .
do i need to re download and start again?
OhioYJ said:
Use this module: Magisk Hide Props Config
It requires: BusyBox, installer in this thread first post.
To activate the module and chose your new certified fingerprint you will need a terminal emulator, you can use any one you want really, personally I use this one.
Any questions ask.
Click to expand...
Click to collapse

leonzon said:
disabled magiskhide in magisk
Click to expand...
Click to collapse
Why are you disabling this? You need Magisk hide enabled. I rename Magisk as well. My phone passes safetynet and CTS. On the latest version of Magisk MagiskHide is off by default, it used to be on by default. TopJohnWu announced that a while back here.

OhioYJ said:
Why are you disabling this? You need Magisk hide enabled. I rename Magisk as well. My phone passes safetynet and CTS. On the latest version of Magisk MagiskHide is off by default, it used to be on by default. TopJohnWu announced that a while back here.
Click to expand...
Click to collapse
ok , so maybe thats all this is? damn, im sorry for wasting your time. What do you mean by you rename magisk, in the app drawer? the process?
thanks

leonzon said:
ok , so maybe thats all this is? damn, im sorry for wasting your time. What do you mean by you rename magisk, in the app drawer? the process?
thanks
Click to expand...
Click to collapse
In recent versions when you choose hide and it picks a random name for the Magisk Manager app it lets choose a name for the app instead of just Manager.