Related
Hi,
I am planning to install the shining new 4.4.2 build (OmniROM unofficial) on my US Acer A500. I have an (*gasp*, *laugh*) unrooted stock ICS (4.0.3, Kernel: 2.6.39.4+, Build: Acer_AV041_A500_1.033.00_PA_CUS1), which I want to upgrade to this OmniROM build. So far, reading the thread, this looks like the installation dependency tree:
[ -> : Depends on]
OmniROM (4.4.2) -> CWM 6.0.4.5 -> skrilax bootloader (V8) -> nvflash
Can anyone comment on if my understanding of the dependency tree correct? Should nvflash be my starting point for installation?
Any other notes/pointers?
Regards.
samikrc said:
Hi,
I am planning to install the shining new 4.4.2 build (OmniROM unofficial) on my US Acer A500. I have an (*gasp*, *laugh*) unrooted stock ICS (4.0.3, Kernel: 2.6.39.4+, Build: Acer_AV041_A500_1.033.00_PA_CUS1), which I want to upgrade to this OmniROM build. So far, reading the thread, this looks like the installation dependency tree:
[ -> : Depends on]
OmniROM (4.4.2) -> CWM 6.0.4.5 -> skrilax bootloader (V8) -> nvflash
Can anyone comment on if my understanding of the dependency tree correct? Should nvflash be my starting point for installation?
Any other notes/pointers?
Regards.
Click to expand...
Click to collapse
Hi,
i upgraded my unrooted Stock-A500 some moths ago.
My Description you can find here:
http://www.agilolfinger.de/tipps/a500-flash.html
Sorry, i wrote it in German.
Bye,
Florian
---------- Post added at 10:56 PM ---------- Previous post was at 10:51 PM ----------
tslbai said:
Hi,
i upgraded my unrooted Stock-A500 some moths ago.
My Description you can find here:
http://www.agilolfinger.de/tipps/a500-flash.html
Sorry, i wrote it in German.
Bye,
Florian
Click to expand...
Click to collapse
Hi,
meanwhile i upgraded the bootloader to Skrillax V.9. I think that's the lastest version and it works without problems for me.
Bye,
Florian
Hi Florian,
Thanks for your reply - using Google Translate, I could get the gist of it. Very helpful.
Have you also upgraded to 4.4.2 so far? What version are you running now?
Regards.
samikrc said:
Hi Florian,
Thanks for your reply - using Google Translate, I could get the gist of it. Very helpful.
Have you also upgraded to 4.4.2 so far? What version are you running now?
Regards.
Click to expand...
Click to collapse
I just upgraded to 4.4.2 (build 4 20140426).
I already have installed Skrillax V9 bootloader
I downloaded from here:
http://forum.xda-developers.com/showthread.php?t=2705989
* CWM 6.0.4.5
** installing with fastboot.
** install drivers on PC
** install fastboot
** Connect tablet to PC and install CWM
* Build4-ROM-Image
** Boot to CWM
** Factory-reset
** put zip-file on sdcard and install it from CWM
** put Super-SU-zip on sdcard and install it directly after ROM-zip
** then reboot
It seems to work very well.
Florian
samikrc said:
Hi,
I am planning to install the shining new 4.4.2 build (OmniROM unofficial) on my US Acer A500. I have an (*gasp*, *laugh*) unrooted stock ICS (4.0.3, Kernel: 2.6.39.4+, Build: Acer_AV041_A500_1.033.00_PA_CUS1), which I want to upgrade to this OmniROM build. So far, reading the thread, this looks like the installation dependency tree:
[ -> : Depends on]
OmniROM (4.4.2) -> CWM 6.0.4.5 -> skrilax bootloader (V8) -> nvflash
Can anyone comment on if my understanding of the dependency tree correct? Should nvflash be my starting point for installation?
Any other notes/pointers?
Regards.
Click to expand...
Click to collapse
That sounds about right. I would recommend blackthund3r's tool though which makes installing the bootloader a bit easier. You'll also need fastboot to load the recovery into the secondary partition as the normal recovery partition is to small.
Hi! This is an index and guide about the Samsung Galaxy S4 mini plus i9195i
Rooting guide:
I downloaded Kingroot and rooted it there (even though it said not supported, it still worked). I then downloaded Super me and let it do it's magic (delete Kingroot apps and install SuperSU apps). It takes about 10 minutes. After 10 minutes, you can get your refund from the Play Store.
Xposed guide:
I downloaded the Xposed installer, went to install/update, and it all went smoothly for me. Other users reported boot loop, but my phone was fine, so don't blame me if you get boot loop.
Custom Roms:
KitKat ROMS:
CyanogenMod 11
Lollipop ROMS:
CyanogenMod 12.1
Marshmallow ROMS:
CyanogenMod 13
Nougat ROMS:
LineageOS 14.1
Oreo ROMS:
LineageOS 15.1
dotOS 2.4
Resurrection Remix 6.0.0
Pie ROMS:
LineageOS 16
Pixel Experience
Credits to @Danil_e71 for the development on our device
As far as my testing went, all these ROM's are pretty stable and that includes LOS 16. This device is not my primary device though, so I don't test as well as I used to. LOS 16 doesn't seem to have any major bugs. (I didn't even find minor bugs either, but again, I don't test properly.). You need the latest TWRP to flash it though.
Custom Kernels:
Custom kernel by alexax66 for stock ROM 4.4
.zip file (v 0.1.7)(Flash via recovery)
.tar file(v 0.1.7)(Flash via odin)
(v 0.1.7) Disc image file
Source
It works well, normal features work and it seems to make the phone work faster. I found that all kernel features do work, while there are a few bugs (I've come across 2: the alarm clock doesn't work and I can't search for mobile networks/ put new apns in). To make sweep2sleep work, you must insert
Code:
su
echo 1 > /sys/sweep2sleep/sweep2sleep
into the terminal after adding code to the build prop (this worked for me, but after a reboot it stopped). I installed first via TWRP official and then via Odin. I'm not sure if you have to do it that way, but I can assure you that if you do do it that way, it will work.
I would not recommend this kernel, due to its instability, although I did used to use it daily.
Custom kernel for stock ROM 4.4 by Danil_e71
https://forum.xda-developers.com/attachment.php?attachmentid=3778847&d=1465586157
I could not get WiFi working on this kernel.
Custom kernel for CM 11 by Danil_e71
https://forum.xda-developers.com/attachment.php?attachmentid=3778501&d=1465562842
Overclocks to 1.4 Ghz, and works well.
Custom Recoveries:
I am only listing the most recent versions:
CWM
flash via recovery (v 6.0.5.1) by @alexax66
flash via odin (v 6.0.5.1) by @alexax66
Disc image file (v 6.0.5.1) by @alexax66
Philz
flash via odin (v 6.59.0) by @alexax66
flash via recovery (v 6.59.0) by @alexax66
Source
TWRP
flash via recovery (v 3.1.0-0) by @Danil_e71
Stock ROM:
Here
Stock Kernel:
Latest stock kernel (Disc image file)
Stock Recovery:
Stock recovery (Disc image file)
Anyone else tryed this metod and can confirm that them devices is rooted ?
Zakariasz said:
Anyone else tryed this metod and can confirm that them devices is rooted ?
Click to expand...
Click to collapse
yeah I just rooted my device by installing the linked KingRoot apk. It failed the first try but I tried a second time and now it works
I don't have custom recovery, nor kernel nor Xposed framework yet though.
Stagefright-Official Rom
Hello,
just to say that I upgrade (odin flash) to last Official rom yesterday, find on sammobile:
Model GT-I9195I
Model name GALAXY S4 mini LTE
Country Netherlands
Version Android 4.4.4
Changelist 5332500
Build date Mon, 11 Jan 2016 11:42:16 +0000
Product code PHN
PDA I9195IXXU1APA1
CSC I9195IPHN1APA1
good news : all Stagefright detector are green !
exzemat said:
good news : all Stagefright detector are green !
Click to expand...
Click to collapse
What is Stagefright?
LoScienzo said:
What is Stagefright?
Click to expand...
Click to collapse
wikipêdia:
Stagefright is the collective name for a group of software bugs (or more specifically backdoors), that affect versions 2.2 ("Froyo") and newer of the Android operating system, allowing an attacker to perform arbitrary operations on the victim device through remote code execution and privilege escalation.[1] Security researchers demonstrate the bugs with a proof of concept that sends specially crafted MMS messages to the victim device and in most cases requires no end-user actions upon message reception to succeed, while using the phone number as the only target information.[2][3][4][5]
Sorry, but I have a stupid question:
Can I use the Netherlands-version also on devices that are used in other countries / with other carriers?
Bibabuzzel said:
Sorry, but I have a stupid question:
Can I use the Netherlands-version also on devices that are used in other countries / with other carriers?
Click to expand...
Click to collapse
Yes, you can, but I think if you wait, your country might come. They just (50 minutes ago) released one for region TPD here. I think I'm going to wait.
I use method described in the first post but with Super Sume v 9.1.9 and xposed installer from the first post and everything work like charm for the moment.
I've done it via same route, it was bit of a hassle for trying to find information about this exact phone. Nice compilation here. Thumbs up.
exzemat said:
Hello,
just to say that I upgrade (odin flash) to last Official rom yesterday, find on sammobile:
Model GT-I9195I
Model name GALAXY S4 mini LTE
Country Netherlands
Version Android 4.4.4
Changelist 5332500
Build date Mon, 11 Jan 2016 11:42:16 +0000
Product code PHN
PDA I9195IXXU1APA1
CSC I9195IPHN1APA1
good news : all Stagefright detector are green !
Click to expand...
Click to collapse
Are there any noticable differences in this update?
no other than more recent kernel build (11/01/2016) : more secure ...
I added a bunch of disc images of kernels and recoveries (no new releases ) I also added the newest stock kernel if anyone needs it. (Released 11 Jan 2016) Also, TWRP 3.0.0-0 is out for our device, links are there. Is anyone working on CM by the way?
Anyone flashed any of the stock firmware in the original post?
Mine came with the stock firmware from another country, and I would like to flash the one for my country to see if the cell phone signal is any better.
Should I bother?
BTW, will doing that trip the knox meter?
I tried to change Kingroot with SuperSUMe but can't do this, course can't brake Knox. I try to install SuperSU it also can't brake Knox. Wtf?
I need custom kernel without bugs for our i9195i.
I also can mention that the Rom for each country has special BB (baseband - drivers for radio module). But there is no any Rom for my country... So i have unstable signal...
---------- Post added at 05:02 PM ---------- Previous post was at 05:02 PM ----------
How to disable Knox?
There's a new official TWRP release (3.0.0-2) here , enjoy
Sent from my GT-I9195I
Update: Got a custom ROM fully working (with small bus where and there). Check the first post
DroidKing18 said:
Update: Got a custom ROM fully working (with small bus where and there). Check the first post
Click to expand...
Click to collapse
You've got a interesting thread here to stay up-to-date on info about our phone, but shouldn't you mention some credits to the guy(s) that found the cm11?
I think it's Chrisled2 talking about it on cyanogenmod-forum (i see he's active here also by the name of chrisled):
https://forum.cyanogenmod.org/topic/110203-gt-i9195i-supported/?page=2#comment-591554
There are mentions about problems with play store, and playing video files in browser.
But thanks again for keeping us up-to-date!
Could you maybe try and test the infrared-functions with the custom rom? I use it for my television and decoder.
bartiest said:
You've got a interesting thread here to stay up-to-date on info about our phone, but shouldn't you mention some credits to the guy(s) that found the cm11?
I think it's Chrisled2 talking about it on cyanogenmod-forum (i see he's active here also by the name of chrisled):
https://forum.cyanogenmod.org/topic/110203-gt-i9195i-supported/?page=2#comment-591554
There are mentions about problems with play store, and playing video files in browser.
But thanks again for keeping us up-to-date!
Could you maybe try and test the infrared-functions with the custom rom? I use it for my television and decoder.
Click to expand...
Click to collapse
I thought OyyO found it first but I wasn't sure. I would've given creds to the devs but they don't seem to be on this site, if they are, tell me, but I've only seen them on 4pda, a Russian site. The truth is that I didn't test it enough to notice all the bugs. I lost a lot of interest when I found that I couldn't put Xposed on
Sent from my GT-I9195I using XDA-Developers mobile app
Btw, there is a also TWRP 3.0.2 now so your links to the official builds are outdated - you may want to link directly to https://dl.twrp.me/serranoveltexx/
~FIRMWARE COLLECTION~
Hi guys! I am proud to present you this collection of official flashable firmware (Using TWRP or whatever) made by me
Warning : This comports risks. XDA or myself can not be held responsible for any problems encountered.
Thank you to read the thread in its entirety before start !!
Changelog
18/03/16 Thread Opening
Click to expand...
Click to collapse
19/03/16 First zip added ! E6833 fw.163
Click to expand...
Click to collapse
20/03/16 Marshmallow for E6853 Available !
Click to expand...
Click to collapse
Installation instructions :
- Root access | Guide here
- Get a recovery (use the guide above)
- Make sure you have a backup
- Download the desired fw.zip (make sure you choose E6853 if you have E6853, but E6833 - E6883 are the same)
- Copy it to your SDCard
- Reboot your phone into recovery
- Install > select your fw.zip then flash it !
- Optionnal, wipe cache / dalvik cache
- Reboot
- Enjoy !
E6853
> Lollipop
Soon uploaded
> Marshmallow
32.1.A.1.163
E6883
> Lollipop
Soon uploaded
> Marshmallow
Soon uploaded
E6833
> Lollipop
Soon uploaded
> Marshmallow
32.1.A.1.163
All the .zip are made with love from .ftf downloaded with XperiFirm
Wink to UserX10 for is smart tuto here and Fragmentation for his guide
XDA:DevDB Information
Bundle of official firmwares for Z5 Premium, ROM for the Sony Xperia Z5 Premium
Contributors
Neil_Armstrong_, UserX10, Fragmentation
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Root | Recovey
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2016-03-18
Created 2016-03-18
Last Updated 2016-03-20
Reserved
reserved {we never know ehe}
Will definitely save me some time, thank you!
Patiently waiting on the uploads
Also, is there any difference between flashing your zip compared to updating through flashtool?
That's why I'm doin' it, time saver !
Hmpf, 7 hours to upload a zip, and I uploaded first an E6833, I should start with xx53, nevermind.
The first zip's I'll upload will only be composed to system.sin file, compared to Flashtool who flash a whole firmware (fota-kernel, userdata, OEM etc. Ok you can choose to exclude some files xD)
Until userdata is not included it means you do not have to wipe anything before flashing, well I guess
My futur challenge is to propose a pre-rooted firmware (automaticly flash SuperSu ^^)
Neil_Armstrong_ said:
My futur challenge is to propose a pre-rooted firmware (automaticly flash SuperSu ^^)
Click to expand...
Click to collapse
That's nice
what is the difference with Xperia Z5 Premium_E6853_32.1.A.1.163_Italy_Generic?
Infraaa said:
what is the difference with Xperia Z5 Premium_E6853_32.1.A.1.163_Italy_Generic?
Click to expand...
Click to collapse
Différence with what ?
Xperia Z5 Premium_E6853_32.1.A.1.163_*CountryX*_Generic ?
The location of the release, maybe some apps, I dunno :3
Neil_Armstrong_ said:
Différence with what ?
Xperia Z5 Premium_E6853_32.1.A.1.163_*CountryX*_Generic ?
The location of the release, maybe some apps, I dunno :3
Click to expand...
Click to collapse
oh i mean, for install this firmware i need root access but in another guides i dont need it, why??
Infraaa said:
oh i mean, for install this firmware i need root access but in another guides i dont need it, why??
Click to expand...
Click to collapse
It's a faster way to run the desired firmware, you flash it through a recovery (who says recovery says root access)
Hello, on my E6883 when I try to flash the 6833 fw.zip, it says "E:Could not find 'META-INF/com/google/android/update-binary' in the zip file." Thus bringing and error to flashing the zip. What could be the problem? I redownloaded it to see if maybe the zip was corrupt but when flashing it again it brought up the same problem. Thanks for the help in advance!
Abc
Sent from my E6853 using XDA-Developers mobile app
houboy said:
Hello, on my E6883 when I try to flash the 6833 fw.zip, it says "E:Could not find 'META-INF/com/google/android/update-binary' in the zip file." Thus bringing and error to flashing the zip. What could be the problem? I redownloaded it to see if maybe the zip was corrupt but when flashing it again it brought up the same problem. Thanks for the help in advance!
Click to expand...
Click to collapse
Sorry ! I failed like a c*nt those zips are not good
I was thinking of contributing to our community for long time..
Thanks to @erfanoabdi for his helps and encouraging me to build this rom.
here is my first TWRP flashable rom for Moto Z based on Android Nougat on Moto Z (All Unlocked Versions) cooked with SuperR's Kitchen
Its a work in progress so dont expect too much ...
Download Link : Google Drive
After flashing it with TWRP you need to use adb sideload (TWRP -> Advanced -> ADB Sideload) and flash UPDATE-AnyKernel2.zip (will remove this step in next build)
ROOT : (OPTIONAL)
Use adb sideload (TWRP -> Advanced -> ADB Sideload) and flash superuser-r259.zip to get systemless Root access.
Reboot
Install phh's SuperUser From PlayStore if you rooted with superuser-r259
I tested it on my Moto Z XT1650-03 GRIFFIN RETMX 7.0 NPL25.86-15 and upgraded it to XT1650-03 GRIFFIN TELUS 7.0 NPL25.86-30
Moto Display and Moto Actions may not work, will look into it soon.
XDA:DevDB Information
Android Nougat on Moto Z, ROM for the Moto Z
Contributors
papampi, erfanoabdi, SoulDJ673
ROM OS Version: 7.x Nougat
Based On: Stock
Version Information
Status: Stable
Stable Release Date: 2017-02-07
Created 2017-02-07
Last Updated 2017-02-07
Reserved
Reserved ...2
Thanks for your great work, best wishes, hope to make your rom more wonderful than stock
:good:
Thanks a lot. Im not sure what is wrong, but now doesnt work moto actions (gesture and display)
Seems like I have the same problem
Hopefully @erfanoabdi can help
papampi said:
Seems like I have the same problem
Hopefully @erfanoabdi can help
Click to expand...
Click to collapse
I'm not in this ROM right now.
Could you please give me some logs (logcat and dmesg)
And more details, is it force stops? Or just not working?
Thanks
erfanoabdi said:
I'm not in this ROM right now.
Could you please give me some logs (logcat and dmesg)
And more details, is it force stops? Or just not working?
No error msgs..everything looks OK, I can switch it on/off but but nothing happens..
Click to expand...
Click to collapse
I just tried adb method to see if all ok or not ...
all ok with adb method
Will flash it again tomorrow to check logs.
As mentioned by Dusha40, all seems ok and no fc,
But Moto display and Moto Actions not working
papampi said:
I just tried adb method to see if all ok or not ...
all ok with adb method
Will flash it again tomorrow to check logs.
As mentioned by Dusha40, all seems ok and no fc,
But Moto display and Moto Actions not working
Click to expand...
Click to collapse
Mmm that's strange everything seems to work properly for me.
Does this ROM have dual SIM support? Thanks.
kwongwt said:
Does this ROM have dual SIM support? Thanks.
Click to expand...
Click to collapse
Have not tested, But it should.
Sensors not working.
Dear host, if you have the version of EU retail 7.0, could you please give me the url to download?
Can anybody provide build.prop from original Nougat firmware?
Thanks
Sensors/Moto Actions aren't working for me either.
Hi all !
As I did not find a similar thread yet for the OnePlus 3T, I am starting one now.
I put some flashable zips together, which contain the modem and firmwares (NOT the complete rom, only other parts like bootloader etc.) of several OOS versions.
This allows you to change modems and firmware quickly and easily without flashing the full roms.
Why would you need this?
For instance if you are on OOS 4.0.3 and want to get rid of the nasty dm-verity message during every start.
Then you can flash this 4.0.2 firmware in recovery, boot into fastboot mode, enter the commands to get rid of dm-verity message ("fastboot oem disable_dm_verity", then "fastboot oem enable_dm_verity"), reboot straight back into recovery, flash 4.0.3 firmware again and bamm - done.
Installation
1. Download a Firmware+Modem package from below
2. Go into Recovery (TWRP recommended)
3. Flash the downloaded .zip file
4. Reboot
5. Enjoy
Notes
These packages are ONLY FOR THE ONEPLUS3 T, no other phone !!!
Under normal circumstances, you cannot flash this zips on a wrong device as the flash zip checks for the device and will fail if you are not on an OnePlus 3 T.
However, if you are unsure and have adb debug connection, try
Code:
adb shell grep Hardware /proc/cpuinfo
On a OnePlus3T, this gives you "Hardware : Qualcomm Technologies, Inc MSM8996pro" back.
Alternatively you can also check in a local terminal app by entering the following command:
Code:
grep Hardware /proc/cpuinfo
DO NOT flash this package on a OnePlus 3 !!!
All packages are assembled by me from original OOS stock roms only.
Disclaimer
As always - Flash on your own risk !!
Make sure you flash the correct version depending on your device!
I can and will not take any responsibility for bricked phones or lost data.
I will not give any support as the content of the packages come from OnePlus and not from me.
Downloads
OOS 5.0.2 - DOWNLOAD LINK
OOS 5.0.1 - DOWNLOAD LINK
OOS 5.0.0 - DOWNLOAD LINK
OOS 4.5.1 - DOWNLOAD LINK
OOS 4.5.0 - DOWNLOAD LINK
OOS 4.1.7 - DOWNLOAD LINK
OOS Open Beta 11 - DOWNLOAD LINK
OOS 4.1.6 - DOWNLOAD LINK
OOS 4.1.5 - DOWNLOAD LINK
OOS 4.1.3 - DOWNLOAD LINK
OOS 4.1.1 - DOWNLOAD LINK
OOS 4.1.0 - DOWNLOAD LINK
Open Beta 3 - DOWNLOAD LINK
OOS 4.0.3 - DOWNLOAD LINK
OOS 4.0.2 - DOWNLOAD LINK
OOS 3.5.4 - DOWNLOAD LINK
Hi @Lord Boeffla,
I have a question about dm-verity: does fastboot commands used while under 4.0.2 firmware have same result has flashing this zip (from @jcadduono) ?
If yes, why do we simply just flash this zip while under 4.0.3 firmware ?
casual_kikoo said:
Hi @Lord Boeffla,
I have a question about dm-verity: does fastboot commands used while under 4.0.2 firmware have same result has flashing this zip (from @jcadduono) ?
If yes, why do we simply just flash this zip while under 4.0.3 firmware ?
Click to expand...
Click to collapse
Good question. Without analyzing what the zip you refer to does exactly, I cannot answer that.
And I will probably not do that as I personally prefer to work with OnePlus original methods only (flashing their firmware, using official commands is my preferred choice).
So - I cannot say. Up to you how you remove dm-verity best for you.
Andi
Hey andi, there is a similar thread i think
https://forum.xda-developers.com/showthread.php?t=3468628
My bad sorry. This is for OP3
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
Crazy_Oni said:
Hey andi, there is a similar thread i think
https://forum.xda-developers.com/showthread.php?t=3468628
My bad sorry. This is for OP3
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
Click to expand...
Click to collapse
Exactly, it is for the OP3. And the firmwares are NOT the same.
Andi
Firmware/Modem of Open Beta 3 added, as this is required to install latest LineageOS version of 9th of March 2017.
Andi
Firmware of todays OOS 4.1.5 added.
Enjoy
Andi
Firmware of todays OOS 4.1.6 added.
Enjoy
Andi
Firmware of Open Beta 11 added, so latest LineageOS can be flashed again properly.
Andi
Firmware of yesterdays OOS 4.1.7 added.
Enjoy
Andi
Firmware of yesterdays OOS 4.5.0 added.
Enjoy
Andi
Firmware of yesterdays OOS 4.5.1 added.
Enjoy
Andi
Firmware of OOS 5.0.0 added.
Enjoy
Andi
Firmware of OOS 5.0.1 and OOS 5.0.2 added.
Enjoy
Andi