I was thinking of contributing to our community for long time..
Thanks to @erfanoabdi for his helps and encouraging me to build this rom.
here is my first TWRP flashable rom for Moto Z based on Android Nougat on Moto Z (All Unlocked Versions) cooked with SuperR's Kitchen
Its a work in progress so dont expect too much ...
Download Link : Google Drive
After flashing it with TWRP you need to use adb sideload (TWRP -> Advanced -> ADB Sideload) and flash UPDATE-AnyKernel2.zip (will remove this step in next build)
ROOT : (OPTIONAL)
Use adb sideload (TWRP -> Advanced -> ADB Sideload) and flash superuser-r259.zip to get systemless Root access.
Reboot
Install phh's SuperUser From PlayStore if you rooted with superuser-r259
I tested it on my Moto Z XT1650-03 GRIFFIN RETMX 7.0 NPL25.86-15 and upgraded it to XT1650-03 GRIFFIN TELUS 7.0 NPL25.86-30
Moto Display and Moto Actions may not work, will look into it soon.
XDA:DevDB Information
Android Nougat on Moto Z, ROM for the Moto Z
Contributors
papampi, erfanoabdi, SoulDJ673
ROM OS Version: 7.x Nougat
Based On: Stock
Version Information
Status: Stable
Stable Release Date: 2017-02-07
Created 2017-02-07
Last Updated 2017-02-07
Reserved
Reserved ...2
Thanks for your great work, best wishes, hope to make your rom more wonderful than stock
:good:
Thanks a lot. Im not sure what is wrong, but now doesnt work moto actions (gesture and display)
Seems like I have the same problem
Hopefully @erfanoabdi can help
papampi said:
Seems like I have the same problem
Hopefully @erfanoabdi can help
Click to expand...
Click to collapse
I'm not in this ROM right now.
Could you please give me some logs (logcat and dmesg)
And more details, is it force stops? Or just not working?
Thanks
erfanoabdi said:
I'm not in this ROM right now.
Could you please give me some logs (logcat and dmesg)
And more details, is it force stops? Or just not working?
No error msgs..everything looks OK, I can switch it on/off but but nothing happens..
Click to expand...
Click to collapse
I just tried adb method to see if all ok or not ...
all ok with adb method
Will flash it again tomorrow to check logs.
As mentioned by Dusha40, all seems ok and no fc,
But Moto display and Moto Actions not working
papampi said:
I just tried adb method to see if all ok or not ...
all ok with adb method
Will flash it again tomorrow to check logs.
As mentioned by Dusha40, all seems ok and no fc,
But Moto display and Moto Actions not working
Click to expand...
Click to collapse
Mmm that's strange everything seems to work properly for me.
Does this ROM have dual SIM support? Thanks.
kwongwt said:
Does this ROM have dual SIM support? Thanks.
Click to expand...
Click to collapse
Have not tested, But it should.
Sensors not working.
Dear host, if you have the version of EU retail 7.0, could you please give me the url to download?
Can anybody provide build.prop from original Nougat firmware?
Thanks
Sensors/Moto Actions aren't working for me either.
Related
/*
Usual Disclaimer: This is an untested compiled ROM. Expect nothing to work.
Dev/test team is not responsible for any bricked devices, wars or terrorist attacks because of the usage of this ROM.
All credits goes to:
- CyanogenMod team
- Brave heart people who will flash, test and report bugs
- Additional developers who will help with solving issues and adding features
*/
I have been finally able to compile CM12.1 for our beloved device. This compilation is pure unadulterated 12.1. The ROM is NOT TESTED AT ALL. EXPECT NOTHING 2 WORK!
All other goodies including screenshots, enhancements, etc. will follow.
Help needed for:
- Flashing, testing and putting out bug reports
- Providing solutions and re-basing to latest CM releases
XDA:DevDB Information
UNOFFICIAL CM12.1 Find5 ROM, ROM for the Oppo Find 5
Contributors
wolverine2k
Source Code: https://github.com/CyanogenMod/android
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Oppo Find5 Phone and a BRAVE HEART!
Based On: Pure Unadulterated CyanogenMod
Version Information
Status: No Longer Updated
Created 2015-07-14
Last Updated 2016-04-23
Reserved
FAQs:
Q: How do I flash the ROM?
A: Any recovery allowing ROM flashing should work. I am using OpenRecovery though.
Coming from Previous Version or if you want a dirty install:
1. boot into recovery
2. flash the Rom
3. reboot
Coming from Previous Version and if you want a clean install:
1. boot into recovery
2. do a full wife
3. flash the Rom
4. reboot
Coming from Any Other ROM:
1. Boot into Recovery
2. Do a full wife (format date, sysyem, preload & cache is the best)
3. Flash ROM
4. Flash Additional GAPPS if you want (GAPPS for 12.1 --> Slim_mini_gapps.BETA.5.1.build.0.x-20150812.zip)
5. Reboot
6. Don't restore system stuff or apps + data using Titanium, it might cause issues
Reserved
where I can download the rom to test ... ???
x1123 said:
where I can download the rom to test ... ???
Click to expand...
Click to collapse
Updated the main thread with the download link (http://forum.xda-developers.com/devdb/project/dl/?id=13745&task=get).
Cheers
no other info about what is working and whatnot?
Even you did not install it on your device? :angel:
grimpressive said:
no other info about what is working and whatnot?
Even you did not install it on your device? :angel:
Click to expand...
Click to collapse
Modified some kernel parameters to get the build working. Haven't been able to test everything but most of all should be working. The updated build is posted. Initial screenshots attached.
Greatly Improved Build: 29th July, 2015
Dear All,
There is a new CM12.1 build available which works pretty good. All CM 12.1 Features and Bugs apply. Can be used on a normal Device.
Status Updated to Release build.
Download from: http://forum.xda-developers.com/devdb/project/dl/?id=13787&task=get
Cheers,
wolverine2k said:
Dear All,
There is a new CM12.1 build available which works pretty good. All CM 12.1 Features and Bugs apply. Can be used on a normal Device.
Status Updated to Release build.
Download from: http://forum.xda-developers.com/devdb/project/dl/?id=13787&task=get
Cheers,
Click to expand...
Click to collapse
Hi, Ive just flashed this rom on my find5. Everthing work ok but sim. My mobile cannot regconize my sim so I cannot make a call. It says im on flight mode. I had already wiped all before flashing rom but no better. Do you have any idea about this issue.
Thanks
-
selphien said:
Hi, Ive just flashed this rom on my find5. Everthing work ok but sim. My mobile cannot regconize my sim so I cannot make a call. It says im on flight mode. I had already wiped all before flashing rom but no better. Do you have any idea about this issue.
Thanks
-
Click to expand...
Click to collapse
Uploaded a new build (UNOFFICIAL_cm_find5-20150807.zip). Please flash this one. I have now made 2 radio properties persistent which allows for delayed SIM card detection and restarts RIL if needed. See the updated screenshots which shows the radio signal strength.
Cheers.
Bugreport and Working CM12 setup that works on my find 5...
wolverine2k said:
New Build: 7th August 2015. New screenshots.
Fixes:
- Radio working again (2 radio property edits in build.prop).
/*
Usual Disclaimer:
Dev/test team is not responsible for any bricked devices, wars or terrorist attacks because of the usage of this ROM.
All credits goes to:
- CyanogenMod team
- Brave heart people who will flash, test and report bugs
- Additional developers who will help with solving issues and adding features
*/
I have been finally able to compile CM12.1 for our beloved device. This compilation is pure unadulterated 12.1. Most of the things should work!
Post your bugs/issues in this thread. Also attach logcat or kernel logs if possible. Any & all help is greatly appreciated.
All other goodies including screenshots, enhancements, etc. will follow.
Help needed for:
- Flashing, testing and putting out bug reports
- Providing solutions and re-basing to latest CM releases
XDA:DevDB Information
UNOFFICIAL CM12.1 Find5 ROM, ROM for the Oppo Find 5
Contributors
wolverine2k
Source Code: https://github.com/CyanogenMod/android
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Oppo Find5 Phone
Based On: Pure Unadulterated CyanogenMod
Version Information
Status: Stable
Created 2015-07-14
Last Updated 2015-08-07
Download Link http://forum.xda-developers.com/devdb/project/dl/?id=13870&task=get
Screenshots
Click to expand...
Click to collapse
Hi I'm new here on XDA so if my postings are messed up.... you'll know why:good:
I just tried flashing this rom and I can report that gapps dosn't work or at least gives an error that some functions do not work.
I then tried flashing an updated gapps 5.1 but same error here.... I gues its more a gapps thing than the rom itself.
I couldn't find other errors that, and it seems very stable :good:
My current setup that works is this:
cm-12-20150802-NIGHTLY-find5
gapps-5.0.x-20150404-minimal-edition-signed
apoulsen said:
Hi I'm new here on XDA so if my postings are messed up.... you'll know why:good:
I just tried flashing this rom and I can report that gapps dosn't work or at least gives an error that some functions do not work.
I then tried flashing an updated gapps 5.1 but same error here.... I gues its more a gapps thing than the rom itself.
I couldn't find other errors that, and it seems very stable :good:
My current setup that works is this:
cm-12-20150802-NIGHTLY-find5
gapps-5.0.x-20150404-minimal-edition-signed
Click to expand...
Click to collapse
You are using the wrong GAPPS. Please use the one for 5.1.1. I am using https://www.androidfilehost.com/?fid=24052804347792592
Post your results back. If you still have problems, attach the logcat for the same.
After i disconnect wifi my oppo cannot connect mobile internet.
But after restart i can use cellular data again.
This problem occur every time that i disconnect to wifi.
Does not work the proximity sensor during call, but the sensor good works at tests. How it can be corrected. thanks
I hope "oppo camera" transfer to this roms.
Zerguz said:
Does not work the proximity sensor during call, but the sensor good works at tests. How it can be corrected. thanks
Click to expand...
Click to collapse
I will look into this in more details. Meanwhile, if you can get the logcat log attached, it would help me a lot.
boynareta said:
I hope "oppo camera" transfer to this roms.
Click to expand...
Click to collapse
Do you have the link to this "oppo camera" you are referring to? Is it the default in the latest Color OS?
simon2bb said:
After i disconnect wifi my oppo cannot connect mobile internet.
But after restart i can use cellular data again.
This problem occur every time that i disconnect to wifi.
Click to expand...
Click to collapse
This works good on my mobile. Can you send me the logcat logs for both radio and main buffers?
http://0fa8391b.dl-one2up.com/onetwo/content/2015/10/7/0fa8391bffee21e1110d96a9f2ce77a7.apk - OPPOcamera
http://2d245e84.dl-one2up.com/onetwo/content/2015/10/7/2d245e84f6821eb264f4841be9d552a0.apk - OPPOgallery2
simon2bb said:
After i disconnect wifi my oppo cannot connect mobile internet.
But after restart i can use cellular data again.
This problem occur every time that i disconnect to wifi.
Click to expand...
Click to collapse
Like in the official cm12 - I use it. After u turn off wifi go to mobil network settings, select apn-s, open the actual settings and just simply do a save on it. And viola the Mobil internet starting.
All developments are carried out thanks to donations on Purchase of these or other devices
thank
Please do not copy files to other file shares
the project is under constant development and refinement
Project name [ROM] Moto X L!te FW LPA23.12-15.5.EU.ML
Tagline Faster Lighter Economical
for XT1052/1053/1058 - 2G/3G/LTE
and only GSM XT1049/1050/1056/1060/ - 2G/3G/LTE (for CDMA use menu *#*#4636#*#*)
SYSTEM Firmware LPA23.12-15.5.EU.ML Multilingual
- firmware Deodex - allowing resources using modifiers such GravityBox apply all when firmware odex, it sometimes limited customization or going awry
- Launcher -4*5, no searche bar
- tzdata 2015f
- icudt53l last
- return "the gesture of the Jedi" (after installing the firmware of the old sensor /*** it does not threaten the phone)
- delete more apps FaceLock, MotoServices, Google Drive & Docs, Permissions and etc
- replaced by sound WirelessChargingStarted
- uppdate apps LatinIME, Migrate, Calendar, AudioMonitor, Moto, MotCamera, MotGallery
- Stagefright Fix
- removed a lot of the background services collect and send data on the type of phone DropBox, MotoCare, MotoConntect, Drive, FaceLock ... etc.
- add apps VendorApp ESFileManager, CCleaner
- added Russian, Ukrainian language
for Unloked Device
Install for Custom Recovery
Root not PreInstalled
Download there https://yadi.sk/d/jp8ykQqFindY8/MotoX/5.1.0
for Loked Device
5.1.0 for locked phones ready to be sewn LONG !!! 5.1.0 1.5 GB used by all, no matter what the new system weighs only 900MB ... the old system to be erased
Install for QDLoad9008
Root, BusyBox is PreInstalled
- Root SuperSU v2.46
- BusyBox v1.32.2
DISCLAIMER
Author is not responsible for totally bricked devices, broken arms, legs, plane crashes and your wife's cheating.
All actions taken is your own risk.
Instructions to install
You:
- shouldn't be afraid of Qualcomm HS-USB QDLoader 9008;
- do not change any files, pathes;
- can install drivers manually;
- need to install python-2.7.9 and pyserial-2.7.win32;
- unzipp _Rus_5_1_0_LPA23_12.XX.7_BL_V30.BE.rar to Cython27;
Method is dangerous, however gives results.
you must have firmware SU6-7 receiving is not in the form of an update (OTA) and stitched through the RSD Lite.
00 Flash *******_5.1.0-LPA23.12-XX.7_CFC.xml firmware
01 Unzipp everything to Cython27.
02 Run BLBROKE.bat.
03 After you got Qualcomm HS-USB QDLoader 9008, install drivers manually
04 Run RUN_Rus_Part**.bat. Parts 250 of system.
*** You can also run a file if you are sure that your phone can work 6-7 hours with the screen RUN_Rus_***_Full.bat
then repeat this step X times (the number of times equal to 6)
while (found next part) do
***
>> fastboot to hold 10 minutes that would have been charged a little phone
>> Run BLBROKE.bat.
>> Run RUN_Rus_***_Part**.bat. Parts 250 of system.
***
end
99 Turn device on. Now you have SU DEODEX PreRooted
Drivers, Soft there -> https://yadi.sk/d/p458Cy0XineRC
Scripts, ROM there -> https://yadi.sk/d/kxbxpTnziSg35/Moto X/5.1.0
Please do not copy files to other file shares
the project is under constant development and refinement
XDA:DevDB Information
[ROM] Moto X L!te FW LPA23.12-15.5.EU.ML, ROM for the Moto X
Contributors
CrashXXL
ROM OS Version: 5.1.x Lollipop
ROM Firmware Required: Android 5.1.0 LPA23.12-15.5
Version Information
Status: Stable
Current Stable Version: 1.00
Stable Release Date: 2015-10-19
Current Beta Version: 0.01
Beta Release Date: 2015-09-28
Created 2015-10-12
Last Updated 2015-10-21
So can I assume this is a stock based rom that has been debloated, optimized, and such but is fully functional as a stock Rom? I've been waiting to update the wife's X on account of all the reported troubles with the official lollipop update.
This firmware is the most clean and fast
It based on the stock, and includes all updates and patches
Hi!
First of all, thank you very much for your rom, the "jedi" gesture is back!
I checked the stagefright detector and it seems to be vulnereble to the "CVE-2015-6602" I asume is a new vulnerability and motorola haven´t patched yet.
I have installed the rom an hour ago and everything works as expected, so nothing else to report, if I find anything strange i will tell you.
Thanks again!
Iktor said:
Hi!
First of all, thank you very much for your rom, the "jedi" gesture is back!
I checked the stagefright detector and it seems to be vulnereble to the "CVE-2015-6602" I asume is a new vulnerability and motorola haven´t patched yet.
I have installed the rom an hour ago and everything works as expected, so nothing else to report, if I find anything strange i will tell you.
Thanks again!
Click to expand...
Click to collapse
stagefright was fixed in last update, so I would certainly expect this ROM to have that patch. also, I believe that this thread should be moved to the Development section, not in general. you may need a mod to help out.
"and only GSM XT1049/1050/1056/1060/ - 2G/3G/LTE (for CDMA use menu *#*#4636#*#*)"
So this could work on the Sprint network with a 1056?
please link to another server
Enviado desde mi Moto X mediante Tapatalk
May I know how often will you update?
What about the very serious glitch-bug on YouTube ? Is it fixed ?
Sent from my XT1052 using Tapatalk
the project will be updated as long as I have moto phone x1
applications such as YouTube, Chrome, and others I can not fix, maybe, I do not have the source code of the product
YES 1056 will work
Xposed?
wildblade64 said:
Xposed?
Click to expand...
Click to collapse
http://forum.xda-developers.com/xposed
CrashXXL said:
the project will be updated as long as I have moto phone x1
applications such as YouTube, Chrome, and others I can not fix, maybe, I do not have the source code of the product
Click to expand...
Click to collapse
Thank you for reply.
jco23 said:
stagefright was fixed in last update, so I would certainly expect this ROM to have that patch. also, I believe that this thread should be moved to the Development section, not in general. you may need a mod to help out.
Click to expand...
Click to collapse
http://forum.xda-developers.com/moto-x/general/ota-xt1052-firmware-update-5-1-10-10-t3221898
Above thread has screenshots of XT1052 with update and shows that the above vulnerability is not fixed yet. It's the only one thats not fixed.
---------- Post added at 07:05 PM ---------- Previous post was at 07:02 PM ----------
CrashXXL said:
the project will be updated as long as I have moto phone x1
applications such as YouTube, Chrome, and others I can not fix, maybe, I do not have the source code of the product
Click to expand...
Click to collapse
I'm sorry... I dont understand... Do these apps not work right now???
I want to try this ROM to get back to stock... I do not have a system to flash the stock files...
Please help me understand.
XT1049 on C Spire?
Do you think this ROM will work on XT1049 from C Spire? I also would like to use a stock based ROM.
I do not change third-party applications, such as YouTube, Chrome, and other Google search, wait for the update application from the developers (Google)
Sorry, I meant to say if this rom will have xposed built in. Thank you so much crash by the way, I'm assuming this will eventually work for xt1058 with locked bootloaders?
what is that?
the gesture of the Jedi
what is that?
On kitkat you could have your hand in front of the screen and it would display moto display, since the lolipop update, you have to hold your hand directly over the light sensor for a few seconds.
THEAD HAS BEEN MOVED TO UNOFFICIAL SOURCE BUILT VERSION..
more stable and OTA supported...
Thread link := UNOFFICIAL RedWolf Recovery 3.2.1 santoni
Reserved
Working like a charm :good:
Oops one SS got wrong uploaded --"
Thanks Bro , great work. :good::good::good:. Downloading . :fingers-crossed:
Thanks bro, I was eagerly waiting for this, after my redmi note 3
UPDATE :
Encryption Fixed
Swapnil Soni said:
UPDATE :
Encryption Fixed
Click to expand...
Click to collapse
Any chance to receive it on 2 GB variant ??
Can I lock my bootloader so that no one can flash other recovery through fastboot, will I be able to unlock my bootloader in future, needs expert opinion.
Wasef x said:
Any chance to receive it on 2 GB variant ??
Click to expand...
Click to collapse
I dont have idea ask to ATG Droid ... He has issues too in mido variant. I have just ported it tho
himfa71 said:
Can I lock my bootloader so that no one can flash other recovery through fastboot, will I be able to unlock my bootloader in future, needs expert opinion.
Click to expand...
Click to collapse
I'd suggest you to do not lock bootloader.. because xiaomi is giving worst policy for unlocking bootloader if something will happen then you cant flash any stuff so better to stay unlocked.
Swapnil Soni said:
I'd suggest you to do not lock bootloader.. because xiaomi is giving worst policy for unlocking bootloader if something will happen then you cant flash any stuff so better to stay unlocked.
Click to expand...
Click to collapse
Then I think password is of no use, because any one can flash other recovery and password will be gone,
Swapnil Soni said:
I dont have idea ask to ATG Droid ... He has issues too in mido variant. I have just ported it tho
Click to expand...
Click to collapse
thanks for your response
Is this working on 2gb Ram variants ?
rkdok23 said:
Is this working on 2gb Ram variants ?
Click to expand...
Click to collapse
Read OP, man. It does not support 2GB variant.
Not working in 2gb variant
Swapnil Soni said:
Red Wolf Recovery is custom recovery based on TWRP source code however some things are working here slightly different then you might expected. The main objective of this project is to provide stable recovery with features which you have never seen before in a recovery and which have not been accepted for adding to the official source code of TWRP. This recovery is also first recovery on the world with password protection.
Based on TWRP version: 3.1.1-0
For device: santoni
Original Developer: ATG Droid
Ported to Santoni: Swapnil Soni
Thanks by ATG Droid: z31s1g (for the base of his theme), Ray Li (For his useful advice in the beginnings), osm0sis (for his image scripts), dadi11 (for his awesome kernel) etc.
Thanks: ATG Droid (for developing this), @avirk (for giving opportunity to port) @dineshthangavel47 for his hardwork to port for 3s and which helped me alot in porting ..
FEATURES:
Installation instructions:
1) Open this AFH Link.
2) Open Latest Version -> Download "RedWolf_3.1_santoni-XXXX.img" or "RedWolf_santoni_XXXX_XX_FLASH_SCRIPT.zip"
3.1) If you download ".img" file...
a) Flash it from your exiting TWRP by Rebooting to TWRP -> Install -> Select Image
b) Flash it using Flashify
c) Flash it using fastboot command fastboot flash recovery RedWolf_3.1_santoni-XXXX.img
3.2)If you download ".zip" file Extract it, Reboot your phone to fastboot mode. Run "Boot.bat" if you want to temporarily boot it or Run "Flash.bat" to flash the recovery.
Bugs:
- Flash light not working
- MIUI OTA Working if boot backup is taken for OTA survival...
- Not working on 2GB variants...
- Nothing Else...
Downloads:
RedWolf Santoni 3.1.x
Changelog for BETA 5.0:
- Fixed Fingerprint Error
- Removed unsupported Fingerprint & FGO Patch
- Fixed More Strings of Tamil Language (Not Complete Yet)
- Removed Flashlight Button as its broken
Screenshots
Contact Us
Contributors
ATG Droid,Swapnil Soni, @dineshthangavel47
Version Information
Status: Beta
Latest Version: 6.x
RedWolf Version: 3.1.1.X
TWRP Version: 3.1.1-0
Created 2017-11-04
Last Updated 2017-11-04
Click to expand...
Click to collapse
Please port it to 2GB variant too, i want to try this on my device nice work bro
yogasetyaadi said:
Please port it to 2GB variant too, i want to try this on my device nice work bro
Click to expand...
Click to collapse
If you see on mido and 3s xda thread .. none them have been working on 2GB variants so how do i port...
Swapnil Soni said:
If you see on mido and 3s xda thread .. none them have been working on 2GB variants so how do i port...
Click to expand...
Click to collapse
I cannot help you because i'm not understand the way to port. But I will be waiting patiently. I'm very glad to see your reply. Thanks a lot
I don't really understand how to make OTA working. Can you explain please ?
Updated on 17th March 2019
I am not responsible for brick your devices, Please flash at your own risk, but i tested, i can help you save brick devices also, can contact me anytime at hangouts.
Note:
I developed this ROM and tested as well,
Change log: 17/03/2019
1: Synced latest Source
2: Embedded March 05 Security patch
3: Minor fixes with Mokee device Trees
4: NFC (please Check and confirm)
What's not working:
Please tell.
Hey Folks:
Always bring something new and different for Victara device,
Lineage MOS. 8.1.0 Unofficial (STABLE VERSION) for Victara Moto x2 2014 Developed by weibo.com/diyroms
Lineage Unofficial 8.1.0, developed by Montana team. link: https://github.com/montanadevelopment
Credits: All Montana Development Team
Credits: Micheal Chen and team for MOS (Moonlight OS, Lineage 8.1.0)
Dated: 03rd June 2018
Battery life is very very good in this stable version
What's not working
1: Pattern lock late response first time.
2: HDR (waiting for Fix)
Other you can tell
What's Working:
1:Almost everything you need for daily use
2: Video recording working
Other you can check and report bugs for improvement
What you need:
MOTO X2 2014 Victara device
( Unlocked boot loader having TWRP 3.2.1.0 old versions won't work for 8.1)
[GUIDE] (Please Read after point 5 with concentration)
1: Download ROM and Unofficial 8.1 Gapps nano or as your taste from below links
2: Open TWRP and prepare all internal storage backup and your NANDROID backup.
3: Open Wipe, Advance Wipe and Change file system and Format Data, system, Cache with ext4
This will erase all your data (If you are already at ext4 then no need to wipe with ext4)
4: Now in TWRP connect device with PC or have a OTG USB with files and copy files in internal storage i.e. ROM zip and gapps zip
5: Now flash ROM zip and reboot system and setup everything in Lineage setup
6: You will see some Chinese apps, You can remove them by Root uninstaller, this ROM is rooted by default.
7: Go to setting, developer options and click advance reboot.
8: Now reboot to Recovery and go to gapps and flash then reboot. (You must have latest gapps from opengapps.org or you will need to update play services manually)
Here you done.
Source: https://github.com/LineageOS/android/tree/lineage-15.1
Kernel: https://github.com/zahidmgsk/android_kernel_motorola_msm8974
Device Trees: https://github.com/zahidmgsk/android_device_motorola_victara/tree/mko-mr1
Vendor: https://github.com/TheMuppets/proprietary_vendor_motorola/tree/lineage-15.1
If any issue please ask me at G+ anytime
Download Link Lineage 15.1 Unofficial Gdrive 11.04.2019
https://drive.google.com/file/d/1Ql5xw9I_UlGUC6gfOKI9it-N-e7hVmqV/view?usp=drivesdk
Download Link for MOS. Stable Version 5.0 Dated 12.11.2018
https://mega.nz/#!5j4iyQzT!21w7uH3OoldpEB68Sh7jLTWFLKDQdyg9JEZxZhC2i84
Version 5.0 updated on 12.11.2018
GAPPS Official 8.1.0: LINK
https://opengapps.org/
ALL DONE HERE
i have already tested this ROM Very good battery and smooth ROM... as far as will get next Update then share according...
SEE YA...
Reserved and SS @Archangel try this
Did the NFC work?
ColorfulNight said:
Did the NFC work?
Click to expand...
Click to collapse
I don't think so, because still there js no fix for victara 8.1,
zahidm said:
I don't think so, because still there js no fix for victara 8.1,
Click to expand...
Click to collapse
Nice to see an actual LOS build! thank you. Did you included patches for Camera HAL1? Will test on weekend when i find some time.
bejunk said:
Nice to see an actual LOS build! thank you. Did you included patches for Camera HAL1? Will test on weekend when i find some time.
Click to expand...
Click to collapse
I sent all data to Chen you can check and verify if not than i can ask him to add in next build.
what does MOS stand for? I know Lineage "OS" is Operating System
renzs said:
what does MOS stand for? I know Lineage "OS" is Operating System
Click to expand...
Click to collapse
After L there is M so we made it MOS ?
Always on display
Does it support Always on display, I mean is there any setting to set ambient display to always on?
What about pixel style navigation bars?
Nirmal Rai said:
Does it support Always on display, I mean is there any setting to set ambient display to always on?
What about pixel style navigation bars?
Click to expand...
Click to collapse
Yes there is always on setting, and this is actual lineage source so no pixel style navigation bar.
Battery
Battery life if always on display enabled?
Nirmal Rai said:
Battery life if always on display enabled?
Click to expand...
Click to collapse
Yes i am using user awake display and i got about 3 hours 25 min of screen on time.
Hello, could you please provide the link for the source code?
Won't support multilanguage...
jeferson1979 said:
Won't support multilanguage...
Click to expand...
Click to collapse
Yes it is, please follow procedure property
zahidm said:
Yes it is, please follow procedure property
Click to expand...
Click to collapse
Im using pico gapps, and done all the recommended, will try with nano or mini
jeferson1979 said:
Im using pico gapps, and done all the recommended, will try with nano or mini
Click to expand...
Click to collapse
So you have no multi language support? You flashed ROM and Gapps together?
InnerSanctum said:
Hello, could you please provide the link for the source code?
Click to expand...
Click to collapse
Hey it's really easy to download build sources, but huge files you tried a Git hub?
zahidm said:
So you have no multi language support? You flashed ROM and Gapps together?
Click to expand...
Click to collapse
Do it step by step. with stock gapps, same result, the rom only shows english and chinese, gapps are on pt-br, but system still as reported.
Sorry for my bad english
jeferson1979 said:
Do it step by step. with stock gapps, same result, the rom only shows english and chinese, gapps are on pt-br, but system still as reported.
Sorry for my bad english
Click to expand...
Click to collapse
After flashing go to system, language and add a language and tell me how many languages are there..
And also try these gapps in link below..
https://mega.nz/#!BuJx0CQT!dt5SKKnWT5aFkvYPUkcn5vPI2AW0zK47r479pkqmtWk
I didn't find anything about it, so I came to share
Pixel Experience 10.0 Beta
Device: Redmi Note 4/4X (Mido)
By AryanKendare
Link from Last Build:
https://androidfilehost.com/?fid=1899786940962588662
Link from All Builds:
https://androidfilehost.com/?w=files&flid=284464
is there a thread link so we can share and discuss with the OP ?
Please, don't do this, let the developer share when it's ready
Do you have his permission to share his work?
Aryan will self release it when it's ready for everyone.
It's in testing phase & already in discussion in pixel experience 9.0 official thread.
Sent from my mido using XDA Labs
Waiting for official
well, it is available for download...why not...
tenssa said:
well, it is available for download...why not...
Click to expand...
Click to collapse
Waiting for some noobie crybabies
Sent from my mido using XDA Labs
It's available on telegram
PixelExperience Unofficial is here by @aryankedare
Changelog:
- Fixed VOLTE
- Fixed BT CALLS
- Fixed Most Of the Minor Bugs
*BUGS :
- FPS
- qcrilmsgtunnel fc
- magisk
Link:- https://www.androidfilehost.com/?fid=1899786940962589829
Note:
Please Consider Contributing to Server expenses which will help me to keep pe alive for mido
Join for bug report @Pixelexperiencemido
System-as-root will be send to all devs and testers
i read once that to install android 10 we need a different version recovery,coz with pie recovery it won't work
joe170 said:
i read once that to install android 10 we need a different version recovery,coz with pie recovery it won't work
Click to expand...
Click to collapse
Yeah.. but this ROM can install normally
xene10 said:
Yeah.. but this ROM can install normally
Click to expand...
Click to collapse
did u try it bro? or anyone ?
New look
The ROM was smooth but had some issues like Vote was not working and calls not working..... I installed it yesterday but I can't use is daily driver..
My TWRP 3.3.1-0 work fine with this, but sadly magisk doesn't work...
for now i don't have any bugs, only lock screen....it's hard to unlock, you have to swipe trough whole screen to unlock...is it even bug or normal thing on pixel phones?
edit, i tried calls and it works fine, for now i will use this rom daily and i'll keep watching for bugs
tenssa said:
My TWRP 3.3.1-0 work fine with this, but sadly magisk doesn't work...
for now i don't have any bugs, only lock screen....it's hard to unlock, you have to swipe trough whole screen to unlock...is it even bug or normal thing on pixel phones?
edit, i tried calls and it works fine, for now i will use this rom daily and i'll keep watching for bugs
Click to expand...
Click to collapse
No its not normal thing but when pixel experience pie version is released for mido last year it had the same problem.
tenssa said:
My TWRP 3.3.1-0 work fine with this, but sadly magisk doesn't work...
Click to expand...
Click to collapse
Try flashing the latest magisk 19.4 which apparently supports Android 10.
https://******************/magisk-beta
BUG: version PixelExperience_mido-10.0-20190920 (and all Android 10 beta builds before this):
If connect to LAN or WebCloud services (Google Drive, etc.) with X-plore file browser and run apk file from this cloud (copying to temp for running) then no installing app (apk) but runing as instalator in randomly apps in SmartPhone.
vrij said:
Try flashing the latest magisk 19.4 which apparently supports Android 10.
https://******************/magisk-beta
Click to expand...
Click to collapse
I have installed that version and it doesn't work either, the phone does not start
At the moment it is not possible to root
Magisk - I think it only supports a/b partitioning for Android 10, not A only on 19.4 build at the moment, so since we are an A only style device, Magisk Android 10 support isn't working yet
BUG: version PixelExperience_mido-10.0-20190920 (and all Android 10 beta builds before this):
If booting OS (after show bootlogo Pixel) quietly clicks (hardware sound) camera (as click if opening Camera app).
Maybe initialization?
In older versions (Pie) booting no camera clicks.