I have just installed this unit to my VW. Everything is working well so far, the only problem I have is that when I switch the ignition off, a message pops up "shutting down," and the screen switches off but the unit does not fully power down, it goes into a sleep mode. When I turn on the ignition, the unit immediately 'wakes up', there is no start up. This would be fine, but I think it is draining the battery staying in this sleep mode.
I've read that you can change the shutdown timer settings in the factory settings menu but I have no option to do it. The only option regarding power I have is the power status option which can either be ON, OFF or LAST MEMORY. This seems to do nothing.
Does anybody have a fix or can tell me where to find the right settings?
Hi!
I'm considering to buy this model for my VW POLO 64 (2009)
Did you find the way to solve the power off problem?
Thank you!
I bought a Erisin head unit for my VW transporter and I had the same problem. I found with playing with the little dip switches at the back of the unit worked. I had 4 to play with : 1.Nc
2.Nc
3.ACC
4 REVERSE CAM
Sent from my A1601 using Tapatalk
wolfymozart said:
Hi!
I'm considering to buy this model for my VW POLO 64 (2009)
Did you find the way to solve the power off problem?
Thank you!
Click to expand...
Click to collapse
What kind of power off problem do you refer to?
Hi everybody, can someone with this unit es6405v to send me the backup from factory settings config file "mcu.cfg" ? Please! Big thanks.
Thank you @wolfymozart for the dmcu.cfg file backup, i wake up my headunit from deep sleep, you saved me.
Here's the file. Just in case you need it.
What kind of mcu is this?
Got the same problem with my erisin 3015.
Always on (auto sleep) if i set "none" to can bus in factory settings.
Always off (always boot up) if i set can bus to 01 VW
Use LM 2.52 mcu
Related
Hello guys!
I have Xtrons D714A with original ROM (4.4.4) and recently I installed Car Launcher on it. The next day when I powered up the unit again it showed a screen that I have to choose the default launcher for the unit. Anyway the problem is that the touch screen stopped working and I cannot choose anything. The strange thing is that the notification bar is working, I can even dial up the settings bar and enter in the menus, but once I enter there the touch screen does not work as well (it only works in the notification bar).
I tried to reset it trough the reset button but it only resets the settings, I need hard resset to erase Car Launcher. I also tried to turn on the unit while holding all kind of combinations of the hardware buttons but nothing happened - I think that the "power" button is not actually power button because when the unit was working the only thing it did is to get the unit in sleeping mode when I hold it.
I contacted Xtrons but no answer from them by now. Also I saw that I am not the first one with this problem :
http://forum.xtrons.co.uk/forum_posts.asp?TID=144139&PID=211052&title=problem-with-d714a
http://forum.xtrons.co.uk/forum_posts.asp?TID=143637&title=d714a-touchscreen-not-responding
Can someone help with this issue?
Thanks in advance!
Is there some script that I can upload on SD card and do a hard reset if I power up the unit with it? Or upload new ROM and install it from SD card by the same method, and if yes, can someone provide me ROM file?
@strballer try emailing Xtrons at: [email protected]. They usually reply within a day or two. They should send you a link with a firmware download as they did for my D717AL.
Thanks for your answer! I already contacted them and they suggested to turn off the main power for 15 minutes but as expected this done nothing but just reset the settings of the unit, not hard reset. Anyway I just managed to fix the problem. I connected USB keyboard and I was able then to dial the default home launcher. After that the touch screen was working again. Very strange bug...
zhekozhekov said:
@strballer try emailing Xtrons at: [email protected]. They usually reply within a day or two. They should send you a link with a firmware download as they did for my D717AL.
Click to expand...
Click to collapse
They told me there´s no firmware available. Did you mange to have Android 6 on your xtrons D717AL? Since it is sold with this now as far as I read somewhere. I stuck on 5.0
so i have a Chinese 8227L based touch only head unit, and as it is a chinese HU it comes with a custom rom.
i was wondering if the head unit can go to sleep mode instead of shutting down when shutting the car down.
just like our phones and tablets go into sleep mode.
i hate the wait for the unit to boot up, while it could be in sleep mode and just directly pop into live..
after asking the vendor for this option the simple answer was: no it is not possible since the HU does not have an internal battery.
but the HU is a part of my car, and my car has a big battery after all.. the HU has a constant 12V and a switched (acc) 12V..
so why can't it go to sleep (shut down screen, go into low power/hibernation and shut down power to usb) since it still has 12V power?
does anyone know of a rom/firmware that has this option for my 8772L unit?
specs:
model: 8227L
android version: 9 (haven't checked if that's actual android 9)
kernel version: 3.18.79 (gcc version6.3.1 20170404(linaro GCC 6.3-2017.05))
[email protected] #27
build number: full_8227L_demo-userdebug 9 011019 1550113051 userdebug
You have 3 power cable
Black is the ground
Red is the power
Yellow is the memory
I think that you have linked yellow and red
You need to find the same power cable on you car. If you link correctly the cable you will have the sleep of unit when you switch off your car
Inviato dal mio Mi 9T utilizzando Tapatalk
nokian95ita said:
You have 3 power cable
Black is the ground
Red is the power
Yellow is the memory
I think that you have linked yellow and red
You need to find the same power cable on you car. If you link correctly the cable you will have the sleep of unit when you switch off your car
Inviato dal mio Mi 9T utilizzando Tapatalk
Click to expand...
Click to collapse
thanks for your reply!
that's what i thought the first time it shut down..
so i swapped the wires..
it would shut down and loose all settings for the radio, the time and date, etc etc..
i think is a software setting that i can't set.
Accessibility > enable quickboot
shezi2243 said:
Accessibility > enable quickboot
Click to expand...
Click to collapse
thanks for your reply :good:
but i can;t find that setting..
dutchcommando said:
thanks for your reply :good:
but i can;t find that setting..
Click to expand...
Click to collapse
I went round and round with Pumpkin on their 8227 implementation. The only thing you can do is delay the shutoff from 0 to 120 minutes, with several different choices.
If you go past that clock time, it will reboot when you start up. Major design flaw.
bossman4 said:
I went round and round with Pumpkin on their 8227 implementation. The only thing you can do is delay the shutoff from 0 to 120 minutes, with several different choices.
If you go past that clock time, it will reboot when you start up. Major design flaw.
Click to expand...
Click to collapse
AH!
That is something i can work with! thanks..
or rather, not work with for longer than 120 minutes ..
but at least i can have stuff updated over wifi if the car parked near my house (wifi router) especially off line maps and such..
now i have to sit in the car with the keys in and wait for updates to finish..
btw: cpu-Z tells me it's a real android 9 pie, and not a spoofed 8 or 8.1 go android. :laugh:
Hi there,
After doing an upgrade my unit it stuck with a black screen and need to get into recovery mode in order to reload a working firmware.
Anyone any idea how to get there?
Tried the reset button for some time with and without home or on/off button and also removed the power source and pressed reset while putting power back but nothing seems to work
So i'm stuck for now :crying:
Any help?
Did you ever get your unit fixed? Did you try restarting with a USB plugged in with the firmware file on it?
No sorry... never got it working again. Had to send it back for a replacement unit.
I've been doing a lot of back and forth with their support on another issue and I've updated my MCU and software so many times now I thought maybe I'd be able to give you a hand.
Do you use any navigation apps on your Avant4? When I use ones that have voice navigation, the voice is getting truncated at the start and end of the directions. Some apps more than others and it seems to be related to those apps that use TTS (Text to Speech).
I'm using Waze via Android Auto. So i'm not having this problem.
So it runs from your phone and just displays on the Avant4? I have Waze running on the unit directly and it gets truncated.
I have al running on my phone and use a Android Auto box.
U can buy it from Avin USA. See website for all options on your Avant4.
wouterverboom said:
No sorry... never got it working again. Had to send it back for a replacement unit.
Click to expand...
Click to collapse
If you hold the volume knob until it starts blinking then let go and hold it down again it will boot the unit into recovery mode.
Hello guys. I picked up an A-Sure 9" touch screen head unit to put into my MK5 GTi. I got it as it was local and only 50 euro. Tested it at home, workes perfect, couldn't reset the system due to a password but little bit of googling got me 3368 code which worked!
Today I spent a good while downloading Spotify, Google Maps etc. To the unit. Set it up in the car, all going well. I had to turn the car key on/off a couple of times and the unit booted with the usual VW logo however a message underneath that said something like "system not started 3 times fully, will self-test and restar automaticallt". Aaaaand that's where I am now, can't get anything else out of it ?? Any help is apprreciated. Managed to get some screen when I held the vol up+down buttons, said API Active:3 and Intel Sofia 6 I believe? The wait here and nothing again.
What did reseller suggest to try and resolve?
Hello everyone,
I have a problem:
Out of nowhere, my Head Unit turn the music to the max volume, the button response after a maximum of 10 seconds, then I can turn down the volume. Also sometime, if I press anywhere on the screen, the radio turns off or restarts.
think is something related to the software.
Is there any update for this headunit? i attach some photos of the MCU and system version.
I tried to find the device's name/model and updates, but without success. (I've tried already factory reset).
thanks in advance for thinking along.
Greetz from Amsterdam
Hi, try first disconnecting canbus box if you have it at all on this device. Then start up head unit without canbus and wait for 30 sec then shut down headunit and car engine.
Connect canbus again on the back.
Start in contact mode of car, and as soon as unit starts start tapping on center of screen with all five fingers. When reovery mode activated it will proceed automatically and finish. (procedure will erase data and install again!)
Then try if errors and bugs are fixed.
Hello, just an update. Unfortunately this trick doesn't work. Is there a software update for it?
Ask your seller for solution, probably will be or you must do complete install / flash of ROM memory and install again everything.