Database Users

Time Out Option for "Device Lock" on Today Screen?

Is there a way to trigger the "Device Lock" applet on the Today screen after a fixed amount of time (like 30 - 60 seconds)? Most cell phones have this function in case you forget to lock the keypad.
Thanks.

I use to 'turn power off after x minutes' to lock my phone. One of the thing I found that seems to be totally useless if the lock phone feature of WM5.

Actually,
The phone lock feature is extremely useful. Especially if you use a Bluetooth headset.
How else are you going to answer your phone while it is in its belt clip, and not worry about your body pressing buttons?? Without the lock feature, you would have to take the phone out of the case, turn it off (to lock the keys), then put it back in the case. Even still, when you hang up your call, the phone would wake back up anyway!
Yes, I totally agree that we need some sort of delayed auto-lock.

No you don't
TheGadgetGuy said:
Actually,
The phone lock feature is extremely useful. Especially if you use a Bluetooth headset.
How else are you going to answer your phone while it is in its belt clip, and not worry about your body pressing buttons?? Without the lock feature, you would have to take the phone out of the case, turn it off (to lock the keys), then put it back in the case. Even still, when you hang up your call, the phone would wake back up anyway!
Yes, I totally agree that we need some sort of delayed auto-lock.
Click to expand...
Click to collapse
You do not need to touch the phone to answer it using a Bluetooth headset when it is in Standby mode.
Certainly not on my XDA Mini S - and it tell you this in the manual (which I believe is similar to the iMate manual.
All you need to do is use the BT headset button to answer, make a call using voice tags or end a call when the phone is in Standby mode.

Disable wake up for notifications?

I noticed that the 8525 does not wake for new email - just get audible alert. Any way to have it behave like this for other notifications such as new txt msg or incoming call? My device spends the majority of the day in my pocket.

After some further research I found some apps for Palm that appear to do this and an app for PPC called Pocket Guard that comes close. What I really want is to make it so that my device will not wake unless I press the power button. I just want audible or vibration alerts when the device is off. Any input is greatly appreciated.

I'm confused. Anyway, try Setting->S & Notification -> New email messages

I like the way it behaves with new email - I just get an audible alert and the device does not turn on. I want to setup all other notifications to behave this way including incoming calls. I wouldn't mind pressing the power button before answering a call. There are no notification settings to prevent wake.
All other PDAs I have used turned on when receiving new email. This leads me to believe that there might be a reg hack or something to disable wake with other notifications as well.

Me too. I'm bothered by my pda2k waking up when it's in my pocket (e.g. going in/out of bluetooth car kit range, receiving call, receiving sms). The screen can come on, but the screen and easy-to-bump buttons should remain locked until one of the firm buttons is pushed.
Do the designers actually use these devices?!

The program I mentioned above is actually called ScreenGuard (http://www.pocketmax.net/) and will probably do what you want. It will allow the screen to come on but all buttons and screen are locked. You have to enter a combination of 2 programmable keys to unlock. WM5 beta is available in the support forum. I believe that are still working Hermes support but you can check it out. It didn't fully lock everything when I tried it.
I am not interested in any locking security. Just wanting to keep it from waking when I don't want it to. You also cannot use the power button for ScreenGuard.

Key press (by mistake) on the case

When my device P3600 received call or sms, the device is powered up, and then all the keys are active. If the device in case some key can be press (by mistake) and activate a program on this situation.
Does any one have a solution for that?

Use the Device Lock Feature in your Today Screen.

I do not like to add one more line to the dotay screen
can I use it without add it to the dotay screen?

If you don't want an additional line on the today screen then the other option is to set the device to request a password after only one minute of inactivity (under "Settings", "Personal", "Lock").

anonimo said:
If you don't want an additional line on the today screen then the other option is to set the device to request a password after only one minute of inactivity (under "Settings", "Personal", "Lock").
Click to expand...
Click to collapse
10x, but this is not help, the lock is form power up the the device, and the device is automitly powered up when received call or sms

I use a program called "device lock" that can be mapped to one of the buttons, I use button one when you hold for a few seconds. The app locks the phone and turns off the screen, so when you recieve a call or sms the screen will turn back on but the phone will still be locked.
Have a search on the forums here for it, that where i got it from.
Cheers

iMike said:
I use a program called "device lock" that can be mapped to one of the buttons, I use button one when you hold for a few seconds. The app locks the phone and turns off the screen, so when you recieve a call or sms the screen will turn back on but the phone will still be locked.
Have a search on the forums here for it, that where i got it from.
Cheers
Click to expand...
Click to collapse
in this case you can not aswers a call, when received one - because when the device is lock there is no quick way to answer that call.
or I miss someting here.

Carmi said:
in this case you can not aswers a call, when received one - because when the device is lock there is no quick way to answer that call.
or I miss someting here.
Click to expand...
Click to collapse
Yes you can answer a call, the device lock only lets you use the power, answer, and hangup buttons. When the call is finished it is still locked, unless you unlock it.
I use this one. http://www.mr2-power.com/downloads/DeviceLock.CAB

10x, GREAT, this will do the job

it is work fine - 10x

Carmi said:
10x, but this is not help, the lock is form power up the the device, and the device is automitly powered up when received call or sms
Click to expand...
Click to collapse
I am glad you found a way to solve your problem but I don't understand why my suggestion should not work. If you set your device to request a pin after one minute of inactivity if you receive a message the keys will still be blocked until you enter your pin. (I am talking about device PIN not SIM PIN).
And if you receive a call the answer button works even without entering a PIN.

anonimo said:
I am glad you found a way to solve your problem but I don't understand why my suggestion should not work. If you set your device to request a pin after one minute of inactivity if you receive a message the keys will still be blocked until you enter your pin. (I am talking about device PIN not SIM PIN).
And if you receive a call the answer button works even without entering a PIN.
Click to expand...
Click to collapse
Your solution works too, the only thing is sometimes (for example) I'm sitting on the couch using my phone for email or surfing and watching a TV program. I stop to watch something interesting for 3 minutes and my phone has locked itself with the pin lock. I have to enter the code each time this happens. It can get annoying. If I use devicelock, I lock the keys when I need to, obviously when I'm at home and my phone is on the coffee table, it doesn't need to be locked. I set my device pin lock at 2 hours, that should give the phone enough time to lock itself if I loose it...hopefully.

yeah... but when you loose your phone the device lock doesn´t matter. only reinstall a Rom and your phone can be used.

dersvenni said:
yeah... but when you loose your phone the device lock doesn´t matter. only reinstall a Rom and your phone can be used.
Click to expand...
Click to collapse
Yes, very true, but at least they won't be able to see all my contacts, appointments, notes etc. That being said, I always use FlexWallet to encrypt all sensitive information which is synchronized to my laptop.

touch screen and buttons can be locked during a call?
I followed up this thread and found it very interesting. But it does't focus all the problem:
when call's come in, your solutions are ok.
But when I want to make a call, I found there is a nasty *****, clicking to call waiting or to head speaker on, opening a note or calling my voice box etc. etc.
Then I found that it was my ear or my fingers, clicking on the touch screen or my fingers clicking hardbuttons.
I think tat during a call on the normal speaker the only buttons to be active should be "hang on" and "loud speaker on". With loudspeaker or BT on, or call terminated,s screen and buttons should come back to full function.
Anybody knows a solution to this?
Regards, and keep on, its a great forum. i love it.

iMike said:
I use a program called "device lock" that can be mapped to one of the buttons, I use button one when you hold for a few seconds. The app locks the phone and turns off the screen, so when you recieve a call or sms the screen will turn back on but the phone will still be locked.
Have a search on the forums here for it, that where i got it from.
Cheers
Click to expand...
Click to collapse
Hmm this is just "device lock" that we can see in HTCplugin. In my case it does not turn off the screen. It just locks my device. Is everyone has "turn off the sreen" functionality?

> Karl der Käfer wrote:
>
> touch screen and buttons can be locked during a call?
I lastly tried the on-off button to block screen during outgoing calls.
I never did this before because I thought it would cancel the active call, but it doesn't.
Ok, I see it's more or less doing what I want. But it's very unconfortable. When I hit it bad, or don't hit it at all, or forget to press it?
Isn't there a posibility to have the screnn sensibility off, only sensibility, until the call is either ended, passed to outer speaker, headset or BT? or perhaps simply until I give it free manually?
It would improve safe usage of that phone remarkably, I think.
If not :-( , well, I allways can press the button ;-)
curious for what solutions you'll find on your problems with incoming calls. Perhaps that will give me an Idea.
Chears

I've complained about this on just about every major forum I have found. Hopefully, someone will eventually write an app to allow personalized device locking. I would set my trinity to not wake for ANYTHING and have ONLY the power button active. I would prefer to get audible alerts (or vibrate) to incoming calls, alarms and messages. Pressing power would be the only way to turn the device on. PIN features only annoy me. This would be very useful anytime I am not willing to immediately respond to a notification - driving, having dinner, in a meeting, etc. It could significantly improve battery life. I store mine in my pocket and accidental button press is a problem as well.

HD2 in-call lock needed (capacitive screen is too sensitive)

I've been using my HD2 since its release, so i can tell you i've gotten used to all sorts of habits in order to prevent accidental "touches" with either my cheek or my pocket when using a BT headset.
Yet, i still get them. Very often i manually lock the phone during calls, but not always.
I've tried smartlock to lock the phone automatically during calls. It works to some extent, but not always. The phone unlocks twice during call from BT headset, when dialing and when connected. Smartlock will very often fail to lock the phone the second time, locking incoming calls doesn't always work either (i'm guessing it's conflicting with the proximity sensor). Plus since the lock screen during calls is different, a slight rub in the middle of the screen will unlock it (no need to slide anything).
This issue was so bad that i found a way to override the in-call lockscreen with the regular slide-to-unlock lockscreen.
Anyway, after all these months i realized that the only times i completly trust my phone during calls is when i'm holding it in my hand or it's laying on the table while i talk.
I'm posting this to check if any of you found better solutions to this problem than what i mentioned.
Cheers

depending on the rom you are on, try using two fingers to tap the caller id pic, it locks the screen on later roms, then hard key to unlock.(but not end key, cos that still hangs up)

wingm4n said:
I've been using my HD2 since its release, so i can tell you i've gotten used to all sorts of habits in order to prevent accidental "touches" with either my cheek or my pocket when using a BT headset.
Yet, i still get them. Very often i manually lock the phone during calls, but not always.
I've tried smartlock to lock the phone automatically during calls. It works to some extent, but not always. The phone unlocks twice during call from BT headset, when dialing and when connected. Smartlock will very often fail to lock the phone the second time, locking incoming calls doesn't always work either (i'm guessing it's conflicting with the proximity sensor). Plus since the lock screen during calls is different, a slight rub in the middle of the screen will unlock it (no need to slide anything).
This issue was so bad that i found a way to override the in-call lockscreen with the regular slide-to-unlock lockscreen.
Anyway, after all these months i realized that the only times i completly trust my phone during calls is when i'm holding it in my hand or it's laying on the table while i talk.
I'm posting this to check if any of you found better solutions to this problem than what i mentioned.
Cheers
Click to expand...
Click to collapse
might want to check out s2u2. It is very good at locking the phone in call.
http://s2u2.ac-s2.com/

Hello, same thing happened to me, change to the 1.66 ROM and the problem was solved, maybe help you.

wingm4n said:
I've been using my HD2 since its release, so i can tell you i've gotten used to all sorts of habits in order to prevent accidental "touches" with either my cheek or my pocket when using a BT headset.
Yet, i still get them. Very often i manually lock the phone during calls, but not always.
I've tried smartlock to lock the phone automatically during calls. It works to some extent, but not always. The phone unlocks twice during call from BT headset, when dialing and when connected. Smartlock will very often fail to lock the phone the second time, locking incoming calls doesn't always work either (i'm guessing it's conflicting with the proximity sensor). Plus since the lock screen during calls is different, a slight rub in the middle of the screen will unlock it (no need to slide anything).
This issue was so bad that i found a way to override the in-call lockscreen with the regular slide-to-unlock lockscreen.
Anyway, after all these months i realized that the only times i completly trust my phone during calls is when i'm holding it in my hand or it's laying on the table while i talk.
I'm posting this to check if any of you found better solutions to this problem than what i mentioned.
Cheers
Click to expand...
Click to collapse
Try PocketShield
http://www.pocketshield.net/

Custom Tasker Profiles

I personally don't use it, but I know it is a powerful app and since it can be set up to do many things,, I was wondering what custom thing's users are doing with it.
I'll maybe jump on board as well.
List your favorite things you use Tasker for.

I use it to silence my phone whenever my calendar says i'm working. That's about it really. Some of the things I bought it for are built into Android now but I paid for it so I make myself use it lol

AndroidRaven said:
I personally don't use it, but I know it is a powerful app and since it can be set up to do many things,, I was wondering what custom thing's users are doing with it.
I'll maybe jump on board as well.
List your favorite things you use Tasker for.
Click to expand...
Click to collapse
I use it primarily to automate my phone's security.
When I'm home ---> phone connects to home wifi ---> tasker + secure settings turns off my pattern lock; turns bluetooth off and adjusts my volumes
When I leave home ---> phone disconnect from wifi ---> tasker turns my pattern lock back on; turns bluetooth on and adjusts my volumes
When I get in my car ---> phone connect to car's bluetooth ---> tasker + secure settings turns off my pattern lock; turns volumes all the way up
When I leave my car ---> phone disconnects from bluetooth ---> tasker turns my pattern lock back on; adjusts volume
When I get to work ---> phone connects to work wifi ---> tasker + secure settings turns off my pattern lock; turns bluetooth off and turns of vibration mode
When I leave work ---> phone disconnects from wifi ---> tasker turns my pattern lock back on; turns bluetooth back on
For me, this makes my phone secure when i need it to be and insecure when I know I'll be using it. At home, in my car and at work are all times that I have my phone on me and actively using it. I don't need a secure screen so I turn it off automatically with Tasker. When I'm away from any of these places I know I'll have a pattern lock in case I lose my phone. Piece of mind and very easy to set up.
I use tasker for a ton of other things (including quiet hours) but security is my most important use.

Here are some I have:
2 sound profiles to put the phone into silent mode at night and during work hours.
An auto off bluetooth profile that turns bluetooth off if it is disconnected for more than 15 minutes.'
3 music profiles all of which auto launch Google Music and auto play and set volumes depending on which bluetooth device or headset is connected. Line in headset also disables lockscreen, car bluetooth puts phone into landscape in the car dock, bluetooth headset disables lockscreen.
360 degree rotation when charging.
Overheating warning.

when it connects to my work wifi > adjust ringer volume to half
when i'm within 100m from the gym > turn BT on
when phone is docked/charging > turn BT on
that's all i've had a chance to dig into as of now. i know there are tons of other more advanced profiles to use/set up, but i haven't bothered with learning them.

1) turn pattern lock off when on home wifi
2) take a photo of anyone putting pattern lock in wrong (twice) and email me the photo
3) when closing the camera app,.look for all photos less than 15 minutes old and upload them using foldersync to my NAS via sftp
4) Schedule Nandroid backup every 4am on Saturday morning (ensure previous nandroid backup has been uploaded to NAS)
5) backup /sdcard every night to NAS
6) (Task only) - homescreen shortcut to flash all zips in alphabetical order in folder /sdcard/AFlash/zips
-----------------------
Sent via tapatalk.
I do NOT reply to support queries over PM. Please keep support queries to the Q&A section, so that others may benefit

I use a profile to turn off the lock when I'm home, and turn it back on when I'm away.
One to turn off the Wi-Fi when not home and back on when I get back home
And another to download the national geographic photo of the day and set it as the wallpaper every morning.
Sent from my Nexus 5

Launch car mode when plugged in and connected to my car's Bluetooth
Pattern lock when not home or in car
Quiet hours with emergency contact exceptions
Sent from my Nexus 5 using Tapatalk

AndrasLOHF said:
Here are some I have:
2 sound profiles to put the phone into silent mode at night and during work hours.
An auto off bluetooth profile that turns bluetooth off if it is disconnected for more than 15 minutes.'
3 music profiles all of which auto launch Google Music and auto play and set volumes depending on which bluetooth device or headset is connected. Line in headset also disables lockscreen, car bluetooth puts phone into landscape in the car dock, bluetooth headset disables lockscreen.
360 degree rotation when charging.
Overheating warning.
Click to expand...
Click to collapse
Do you mind sharing those so I can use them?
Sent from my Nexus 5 using Tapatalk

For those with Tasks relative to being in the car, how are you determining that location?
I've been using the invert of my Home location, but that's not quite refined enough.
Can Tasker detect the uConnect BT in my Jeep? Or maybe by detecting accelerometer motions?
Curious.

markp99 said:
For those with Tasks relative to being in the car, how are you determining that location?
I've been using the invert of my Home location, but that's not quite refined enough.
Can Tasker detect the uConnect BT in my Jeep? Or maybe by detecting accelerometer motions?
Curious.
Click to expand...
Click to collapse
Tasker can use your connect to BT to trigger actions.
You can have your device turn on BT (for a set number of minutes) when you disconnect from your Wifi. Then when it connects to your car via BT, it can turn off Wifi and/or open up your music player and increase the volume. Or do any number of things.

http://forum.xda-developers.com/showpost.php?p=23301459&postcount=3
That list is a bit old list but I'm always adding or trying differnet things. Starting to use Scenes more now. Like the Sleepy Time one is now a Notification that pops up only during certain time then when I click it there is a small Scene with simple buttons, see attached images.
Also use Tasker to give me info in DashClock. Using OpenMic+ to launch Tasker stuff will make for some fun stuff too.

i use nfc tags associated with my car and home stuff. a tag has a tasker task linked to it. I also use a gym task/profile where when i get within 300m of the gym it turns bluetooth on adjusts volumes etc.

sbenson1226 said:
I use it primarily to automate my phone's security.
When I'm home ---> phone connects to home wifi ---> tasker + secure settings turns off my pattern lock; turns bluetooth off and adjusts my volumes
When I leave home ---> phone disconnect from wifi ---> tasker turns my pattern lock back on; turns bluetooth on and adjusts my volumes
When I get in my car ---> phone connect to car's bluetooth ---> tasker + secure settings turns off my pattern lock; turns volumes all the way up
When I leave my car ---> phone disconnects from bluetooth ---> tasker turns my pattern lock back on; adjusts volume
When I get to work ---> phone connects to work wifi ---> tasker + secure settings turns off my pattern lock; turns bluetooth off and turns of vibration mode
When I leave work ---> phone disconnects from wifi ---> tasker turns my pattern lock back on; turns bluetooth back on
For me, this makes my phone secure when i need it to be and insecure when I know I'll be using it. At home, in my car and at work are all times that I have my phone on me and actively using it. I don't need a secure screen so I turn it off automatically with Tasker. When I'm away from any of these places I know I'll have a pattern lock in case I lose my phone. Piece of mind and very easy to set up.
I use tasker for a ton of other things (including quiet hours) but security is my most important use.
Click to expand...
Click to collapse
Hi,
how do you trigger the "quiet hours" setting with tasker? I want to have different startiing/ending times for quiet hours - including white list for calling. So I thought I try to find a way to trigger it from tasker.
Any ideas here?
cheers,
Tom