Is there a way to trigger the "Device Lock" applet on the Today screen after a fixed amount of time (like 30 - 60 seconds)? Most cell phones have this function in case you forget to lock the keypad.
Thanks.
I use to 'turn power off after x minutes' to lock my phone. One of the thing I found that seems to be totally useless if the lock phone feature of WM5.
Actually,
The phone lock feature is extremely useful. Especially if you use a Bluetooth headset.
How else are you going to answer your phone while it is in its belt clip, and not worry about your body pressing buttons?? Without the lock feature, you would have to take the phone out of the case, turn it off (to lock the keys), then put it back in the case. Even still, when you hang up your call, the phone would wake back up anyway!
Yes, I totally agree that we need some sort of delayed auto-lock.
No you don't
TheGadgetGuy said:
Actually,
The phone lock feature is extremely useful. Especially if you use a Bluetooth headset.
How else are you going to answer your phone while it is in its belt clip, and not worry about your body pressing buttons?? Without the lock feature, you would have to take the phone out of the case, turn it off (to lock the keys), then put it back in the case. Even still, when you hang up your call, the phone would wake back up anyway!
Yes, I totally agree that we need some sort of delayed auto-lock.
Click to expand...
Click to collapse
You do not need to touch the phone to answer it using a Bluetooth headset when it is in Standby mode.
Certainly not on my XDA Mini S - and it tell you this in the manual (which I believe is similar to the iMate manual.
All you need to do is use the BT headset button to answer, make a call using voice tags or end a call when the phone is in Standby mode.
Related
I use my 8525 in a side case and when the phone rings I usually pull out the phone to see who's calling to decide if i want to answer... though 9 out of 10 times i accidentally hit the answer button. I always lock my phone via device lock on today screen... is there a reg hack or setting which will allow me to disable or customize ALL the buttons (when in lock mode) on the 8525 so I don't accidentally answer. to me if i were to assign a button (ie power or ptt) to only be allowed to accept a call (when the phone is in lock mode) that'd be great. I'm tired of auto answering and what good does a device lock do if you can easily auto answer?
bumping this back up... Can I be the only one with this issue? If so how do you use your phone and not auto answer?
abricko said:
bumping this back up... Can I be the only one with this issue? If so how do you use your phone and not auto answer?
Click to expand...
Click to collapse
Sorry you're not getting replies and I have no solution of the type you are looking for sadly. I've tried to replicate what you say happens but it's not easy!!! My key is not that easily pressed and I always put the device back with screen towards my body - my fingers don't seem to get very close to the green button.
This is probably daft to suggest but have you checked the setting that lets you specify auto answer within X number of rings - just in case it's answering the call by itself!!. (apologies if you checked this setting already!!)
Mike
This may do what you want...
http://www.pocketmax.net/smf/index.php?PHPSESSID=da5459e6aadc9c38d5a74b0276782091&board=19.0
Auto Answer is not set... the problem is (and it's a problem with the phone design) when the phone is locked none of the buttons respond until you hit the power button and then unlock the phone via the screen (which is good).
However when there is an incoming call or reminder the screen turns on and then a few buttons are active on the phone (send, end and the two soft keys seem to be). So when a phone call comes in, if the phone is in your pocket or the hip case while reaching for the phone it's VERY easy to accidentally press any of the active buttons and then accidentally accept or reject that call.
I've searched everywhere I can think of and I find little mention of this problem and no mention of a fix, most screen lock replacements only do as much locking as the WM5 built in lock does. The button re-activation after an incoming call is probably something built into the hardware. That's all I can deduce from this.
Thanks for the responses I've received so far.
I am on my fourth PDA phone and have used both Win Mobile 2003 and WM5. They all behaved this way and it is one of my biggest complaints with the Windows OS. I have seen apps for Palm that solve the problem. How hard could it be to have the option to only wake with the press of the power button?!
not hard at all, but the again its M$, i am surprised these devices to have ctrl-alt-del keys.
When my device P3600 received call or sms, the device is powered up, and then all the keys are active. If the device in case some key can be press (by mistake) and activate a program on this situation.
Does any one have a solution for that?
Use the Device Lock Feature in your Today Screen.
I do not like to add one more line to the dotay screen
can I use it without add it to the dotay screen?
If you don't want an additional line on the today screen then the other option is to set the device to request a password after only one minute of inactivity (under "Settings", "Personal", "Lock").
anonimo said:
If you don't want an additional line on the today screen then the other option is to set the device to request a password after only one minute of inactivity (under "Settings", "Personal", "Lock").
Click to expand...
Click to collapse
10x, but this is not help, the lock is form power up the the device, and the device is automitly powered up when received call or sms
I use a program called "device lock" that can be mapped to one of the buttons, I use button one when you hold for a few seconds. The app locks the phone and turns off the screen, so when you recieve a call or sms the screen will turn back on but the phone will still be locked.
Have a search on the forums here for it, that where i got it from.
Cheers
iMike said:
I use a program called "device lock" that can be mapped to one of the buttons, I use button one when you hold for a few seconds. The app locks the phone and turns off the screen, so when you recieve a call or sms the screen will turn back on but the phone will still be locked.
Have a search on the forums here for it, that where i got it from.
Cheers
Click to expand...
Click to collapse
in this case you can not aswers a call, when received one - because when the device is lock there is no quick way to answer that call.
or I miss someting here.
Carmi said:
in this case you can not aswers a call, when received one - because when the device is lock there is no quick way to answer that call.
or I miss someting here.
Click to expand...
Click to collapse
Yes you can answer a call, the device lock only lets you use the power, answer, and hangup buttons. When the call is finished it is still locked, unless you unlock it.
I use this one. http://www.mr2-power.com/downloads/DeviceLock.CAB
10x, GREAT, this will do the job
it is work fine - 10x
Carmi said:
10x, but this is not help, the lock is form power up the the device, and the device is automitly powered up when received call or sms
Click to expand...
Click to collapse
I am glad you found a way to solve your problem but I don't understand why my suggestion should not work. If you set your device to request a pin after one minute of inactivity if you receive a message the keys will still be blocked until you enter your pin. (I am talking about device PIN not SIM PIN).
And if you receive a call the answer button works even without entering a PIN.
anonimo said:
I am glad you found a way to solve your problem but I don't understand why my suggestion should not work. If you set your device to request a pin after one minute of inactivity if you receive a message the keys will still be blocked until you enter your pin. (I am talking about device PIN not SIM PIN).
And if you receive a call the answer button works even without entering a PIN.
Click to expand...
Click to collapse
Your solution works too, the only thing is sometimes (for example) I'm sitting on the couch using my phone for email or surfing and watching a TV program. I stop to watch something interesting for 3 minutes and my phone has locked itself with the pin lock. I have to enter the code each time this happens. It can get annoying. If I use devicelock, I lock the keys when I need to, obviously when I'm at home and my phone is on the coffee table, it doesn't need to be locked. I set my device pin lock at 2 hours, that should give the phone enough time to lock itself if I loose it...hopefully.
yeah... but when you loose your phone the device lock doesn´t matter. only reinstall a Rom and your phone can be used.
dersvenni said:
yeah... but when you loose your phone the device lock doesn´t matter. only reinstall a Rom and your phone can be used.
Click to expand...
Click to collapse
Yes, very true, but at least they won't be able to see all my contacts, appointments, notes etc. That being said, I always use FlexWallet to encrypt all sensitive information which is synchronized to my laptop.
touch screen and buttons can be locked during a call?
I followed up this thread and found it very interesting. But it does't focus all the problem:
when call's come in, your solutions are ok.
But when I want to make a call, I found there is a nasty *****, clicking to call waiting or to head speaker on, opening a note or calling my voice box etc. etc.
Then I found that it was my ear or my fingers, clicking on the touch screen or my fingers clicking hardbuttons.
I think tat during a call on the normal speaker the only buttons to be active should be "hang on" and "loud speaker on". With loudspeaker or BT on, or call terminated,s screen and buttons should come back to full function.
Anybody knows a solution to this?
Regards, and keep on, its a great forum. i love it.
iMike said:
I use a program called "device lock" that can be mapped to one of the buttons, I use button one when you hold for a few seconds. The app locks the phone and turns off the screen, so when you recieve a call or sms the screen will turn back on but the phone will still be locked.
Have a search on the forums here for it, that where i got it from.
Cheers
Click to expand...
Click to collapse
Hmm this is just "device lock" that we can see in HTCplugin. In my case it does not turn off the screen. It just locks my device. Is everyone has "turn off the sreen" functionality?
> Karl der Käfer wrote:
>
> touch screen and buttons can be locked during a call?
I lastly tried the on-off button to block screen during outgoing calls.
I never did this before because I thought it would cancel the active call, but it doesn't.
Ok, I see it's more or less doing what I want. But it's very unconfortable. When I hit it bad, or don't hit it at all, or forget to press it?
Isn't there a posibility to have the screnn sensibility off, only sensibility, until the call is either ended, passed to outer speaker, headset or BT? or perhaps simply until I give it free manually?
It would improve safe usage of that phone remarkably, I think.
If not :-( , well, I allways can press the button ;-)
curious for what solutions you'll find on your problems with incoming calls. Perhaps that will give me an Idea.
Chears
I've complained about this on just about every major forum I have found. Hopefully, someone will eventually write an app to allow personalized device locking. I would set my trinity to not wake for ANYTHING and have ONLY the power button active. I would prefer to get audible alerts (or vibrate) to incoming calls, alarms and messages. Pressing power would be the only way to turn the device on. PIN features only annoy me. This would be very useful anytime I am not willing to immediately respond to a notification - driving, having dinner, in a meeting, etc. It could significantly improve battery life. I store mine in my pocket and accidental button press is a problem as well.
I love my Piel-Frama case. I got the cowskin in blue.
http://www.pielframa.com/menu_htc_tytn.htm
However, the cover activates the touch screen. I was talking to my boss while walking down the street, and it made a note the call history that looked like a hand giving him the finger.
How do you guys deal with covers that touch the touchscreen? If I have a bluetooth headset, I want to walk and talk but the screen goes crazy!
this can't be an unusual problem. i must be missing something easy and simple. If your case covers the screen of your phone, and you are walking and talkng on your bluetooth wireless headset, doesn't the touchscreen get activated by your case!??!
Lock the device before putting it in the case..
Locking the device involves a password. I toggle the device off with the off button (not completely off -screen off) but it must be that the off button gets activated by the case as well, cuz often when I open it back up I have flipped screens and drawn notes by walking...am I the only one with this problem?
twinpeaks said:
Locking the device involves a password. I toggle the device off with the off button (not completely off -screen off) but it must be that the off button gets activated by the case as well, cuz often when I open it back up I have flipped screens and drawn notes by walking...am I the only one with this problem?
Click to expand...
Click to collapse
Doesnt involve a password on my Hermes...
I got a lock button then i press the unlock softkey and tap the screen where it says unlock
twinpeaks said:
Locking the device involves a password. I toggle the device off with the off button (not completely off -screen off) but it must be that the off button gets activated by the case as well, cuz often when I open it back up I have flipped screens and drawn notes by walking...am I the only one with this problem?
Click to expand...
Click to collapse
Buddy, read your Tytn's manual. Nobody advises you to lock your device with a password/number combination. That would be time-based. Many people here including me don't just press the off button to switch the display off but use the default (or third party app) devicelock functionality. You can even use this as a today screen plugin. Press it and once off your device will only accept input via on-button and an unlock-button afterwards on the todayscreen.
Of course people prevent their phones from making accindental phonecalls etc. You should have noticed that function from beginning on however, because this is a default today plugin when you're using your device for the very first time.
Good luck
OK, i had a hard case for the last 8 months and switched to a soft one. At some point I had taken out that lock button thing. It's kind of small to activate, but, I'll live with it
Hi,
I love my new HD2, but i've got the following problem:
The proximity sensor works doesn't work 10% of the time and because the touchscreen is so sensitive, i end up pressing random buttons with my ear or face. I've been manually locking the screen during calls which:
- is really annoying
- doesn't really solve the problem, screen lock during calls does not require slider to unlock, just a regular button and also has a hang up button on it, so it's pretty much back to the original problem.
I know that there's many custom apps out there that can circumvent this issue but i like the stock lock screen (with slider), i don't need another one.
What i need is an app that automatically locks my screen using htc's "slide to unlock" screen after i accept incoming call or after my outgoing call is connected.
If anyone can help me with this i would apreciate it.
why not try s2u2
it has ability to lock after call is connected
do u have something in way of proximity sensor? case or screen protector? i had similar problem but after making bigger hole in screen protector it works 100%
@brkix: i would like a solution that uses the stock lock screen if possible
@lake: i have nothing of the sort, but i confirmed in several forums including this one that the proximity sensor is not 100% reliable
I exactly have the same problem. in my case I want to place a call then want to put the phone in its case while training or running whatsoever and I would really appreciate of being able to lock the keys in order to avoid accidental touching.
schlox said:
I exactly have the same problem. in my case I want to place a call then want to put the phone in its case while training or running whatsoever and I would really appreciate of being able to lock the keys in order to avoid accidental touching.
Click to expand...
Click to collapse
man said everything
+1
SmartLock, offers incall and outcall lock. This may be your best option.
This CAB will lock the hardware buttons when you are in a call if that helps
http://www.cabcache.com/cabs.asp?cab=29
Do you have hair covering your ear?
Without wearing any head wear my sensor works 100% perfect.
Per advice in the second post, I've yesterday installed s2u2. Mates, this program works really good and answers my necessities. All I had to do was to put a short cut of the application to my main screen. Then, I just lock the device by tapping the lock button during a call.
There's even an option existing to lock the phone automatically when the backlight is off and/or during a call directly.
wingm4n said:
Hi,
... I've been manually locking the screen during calls ...
Click to expand...
Click to collapse
Oh well! Please, tell me how you do it!
I'd pleased if at least I could manually deactivate the screen in order to avoid touching button with my cheek!
I've been trying to find an option to lock screen during a call without succeed.
Thanks,
Cheers!
I have the same problem. This part fails.
Sorry, but I insist... wingm4n: how do you lock the screen during calls?
I still haven't been able to find such option
Cheers,
Up....
Hit start then lock(at bottom left side of screen) after dialing or answering a call.
i have same issue...not with keylocks but with the screen!!!almost every time i make or receive a call with my phone in my pocket or by ear hd2 make itself an other call or push lots of function..and this is very annoying!!!i don't like s2u2...really doesn't any solution exist for solve this problem???
thank you!
Cheers!!
Smartlock
Take a look at this:
http://forum.xda-developers.com/showthread.php?t=505032
It locks the screen during calls, and has some other settings as well. I've been using it for a while and it seems to work just fine. And best of all, its free.
in s2u2 settings, just set: "lock on talk" and deselect "lock device". in this way...lock screen will work only in a call. that's it
I used to have such problem during my first uses with the HD2, I would realize because all of a sudden I heard keypad tones (and so did the other person ) while hitting the dialer with my cheek.
After that, I started noticing IF the proximity sensor triggered or not.
It's not really "idle", it's just very "picky", you actually need your ear to cover it, and not just your head being in its way... I took te habit of checking the phone display with the back of my eye to see if it's on while I answer a call, and if it is all I need to do is to move it on my ear so I touch the area with the proximity sensor the display turns off again. Works for me practically 100% of the times now.
How to turn this off
I have a HD2 running the energy rom and when a call is connected it locks the screen. But I use google voice and need to be able to enter my pin. Anyone know how to get the screen not to lock during a call.
I was wondering if there is a way to disable phone's screen when voice dialing number or when answering phone call.
I've an BT headset on my motorcycle helmet, the phone is in my pocket while riding ; the problem is that the screen is activated with every incoming/outgoing phone call and the screen is inadvertently pressed executing silly actions.
I'm looking for a solution without having to install a permanent screen lock as in all day life, having to switch on the screen and then having to unlock it every time I want to use my phone is boring.
So has anybody a solution ‘cause I’ve written a beautiful note during my last hand ree call.
Hi,
In S2U2 app there is option in power settings where phone locks up at talking when using BT.
I guess that it works for you.
Foo Bar said:
I was wondering if there is a way to disable phone's screen when voice dialing number or when answering phone call.
I've an BT headset on my motorcycle helmet, the phone is in my pocket while riding ; the problem is that the screen is activated with every incoming/outgoing phone call and the screen is inadvertently pressed executing silly actions.
I'm looking for a solution without having to install a permanent screen lock as in all day life, having to switch on the screen and then having to unlock it every time I want to use my phone is boring.
So has anybody a solution ‘cause I’ve written a beautiful note during my last hand ree call.
Click to expand...
Click to collapse
Maybe TouchIncallScreen
[user_99] said:
Maybe TouchIncallScreen
Click to expand...
Click to collapse
Just read TICST User Guide, I seems to exactly match with my needs with its 'switch off for BT' feature.
I'll give try it shortly.
Thanks