Hi,
When i am trying install custom ROM using TWRP in my redmi 2 prime phone ,it got strucked it between the process. So my phone got bricked.
So i tried to install via Mi flash tool with stable ROM of MIUI .But unfortunately there are many disk drives opened with the request to format drive when i am connecting my phone with Mi flash tool for the first time.
By mistake i have formatted one disk drive (which had 512 kb size) and it is successfully done
After formatting only i got to its something importent which is need not to be touched. Because my phone is totally dead after this format.
But now i can able to connect my phone using USB cable and the phone is detectable by computer in MI flash tool. But I am unable to flash the phone with stable ROM as the tool showing the error of "hello packet can not be reached". After the error msg the flashing has stopped .
Is there any experienced developers to help me to solve this issue and bring back my phone
Searching for your answers?
VenKat
Related
Hello friends,
I need help, I'm desperate.
My K3 note died for no reason, I was using it hung up and now will not turn over. When I turn on the charger it does not appear any LED on the phone
I was one month using a custom rom, and he was with root and TWRP Recovery.
I installed MTK SP FlashTools, downloaded the Stock ROM VIBEUI 6.0 and try to make the flash'm finding the following error: Error Brom: S_storage_not_match (3182). Already tried other Stock Roms and all have the same error.
What can I do my friends? I lost cell phone?
Thank you
That error means the tool detects a mismatch between rom and phone. Are you using the latest usb drivers? The com port on the lower right looks different. Usually it says preloader instead of MTK port. Try uninstalling the usb drivers and use a different one. Also, change the Firmware Upgrade option to Download Only. One other thing, try with another rom file, possibly and older version rom first and see if it works. Changing the usb cable and port used won't hurt either.
If nothing works, your phone's EMMC might be dead..
How recover emmc for lenovo k3 note
try this its work for me
in sp flash tool try delete all+dowmload option in the firmware upload its work but after this you will lost your imei and original mac address. after this youy need to recover imei but if you don't know your mac address you can't change your mac addresss. its change every time when you on your wifi.
hey guys today I am here to help you with your hard bricked beloved yu .when I got my device bricked(you yureka plus) I searched almost every corner on web to rectify the problem but every where I found words like"yu yureka hard bricked but can be detected by windows as Qualcomm hsb bulk ,fake guides on you tube some other guides which do not match peoples consequences
ANALYISING THE PROBLEM
this guide will work if you found following characteristics in your dead yu
1)its not detected in windows weather you put the PC on test or install the Qualcomm drivers
2)only a red led near the recover glow when you connect it to a power source
RECTIFYING YOUR PROBLEM
okay let's start first make a backup emmc image for yu which will send it to fastboot mode
fetch a memory card of 16gb format it in fat32 now using a IMG writing tool (I used win32 disk manager)write the emmc image on it(will take around 20mins)
I know some people has resource deficiency(like me) but get your yu's battery charged at least 40% now unscrew your you on the main board you will see six golden points now insert battery connect data cable to PC and phone(I had assumed here you have installed yu latest drivers in PC) you will see the red led glows again now press the vol up button and short the 2and 6 points on the main board (by a copper wire)pressing the power button
you will several colored lines come on screen and your device will connect as a verified USB device this is the fastboot mode in yu
Now the real works starts as some people still has locked bootloader I here use the official cyanogen as only stock ROM will automatically boot the device now download the requested files I had given the link viz official firmware for yu
The firmware zip contains ygdp tool open it(password 369) fill the CPB file click on start and done on the first boot several lines will appear they will vanish after you warm up your yu by playing games:laugh:
All credits for ygdp assembly tools goes to the coolpad corporation ,Android mtk for firmware files again coolpad for general coolpad drivers
sorry if you found a little tedious here its my first post by my revived you
Mind a little financial help
paytm no 7404034359(Rs 50 or 20 whatever you like)
Help.....
I have done the above steps and and the flashing of stock firmware is done successfully, but when i turn on the phone it always shows low battery. Is there a problem with my battery or Motherboard?
i had a friend's yureka with bootloop on YU logo,i flashed it using adb fastboot,the phone started vibrating and dint even turned on,only goes to fastboot mode after long pressing volume up and shows red light on connection.I also tried emmc image burning on sd card method but still in same condition.Please help
ygdp tool reference
iamtj said:
i had a friend's yureka with bootloop on YU logo,i flashed it using adb fastboot,the phone started vibrating and dint even turned on,only goes to fastboot mode after long pressing volume up and shows red light on connection.I also tried emmc image burning on sd card method but still in same condition.Please help
Click to expand...
Click to collapse
Bro try flashing stock ROM go to android mtk download from there drivers as well as rom
may be bad battery
davidchellappah said:
I have done the above steps and and the flashing of stock firmware is done successfully, but when i turn on the phone it always shows low battery. Is there a problem with my battery or Motherboard?
Click to expand...
Click to collapse
Bro after flashing stock ROM do it rebooted it self?
It worked dude...million thanks to you!!! Since i burned those emmc image to my brand new sandisk 16gb sd card...it is not formatting nor showing the correct size.. Nothing.... so can you tell me how to use the sd card normally again with detailed and 100%working steps. Thanks in advance!!!!
Harish Topgi said:
It worked dude...million thanks to you!!! Since i burned those emmc image to my brand new sandisk 16gb sd card...it is not formatting nor showing the correct size.. Nothing.... so can you tell me how to use the sd card normally again with detailed and 100%working steps. Thanks in advance!!!!
Click to expand...
Click to collapse
well you see the memory card used by me belonged to
one of my friend and i returned him as it is with image file
written on it. when i asked him how he got it normal he said that he put it in a net setter dongle and formatted by going in disk management but i think a simple card reader will do the job for you
Mosam panghal said:
well you see the memory card used by me belonged to
one of my friend and i returned him as it is with image file
written on it. when i asked him how he got it normal he said that he put it in a net setter dongle and formatted by going in disk management but i think a simple card reader will do the job for you
Click to expand...
Click to collapse
Yeah.. Formatting didn't seem to work so spending some time on internet I repartitioned the memory card using a software and I'm good to go now!!
I was trying to port a rom.. flashed it with something wrong in updater script and now
my asus zenfone max pro m1 is HARD BRICKED
tried all methods including the one on xda using QFIL but I get an error saying SAHARA FAILED...
is there any other way out?
Please help me in saving my device....
Hi did you manage to fix your phone? Mine also hard bricked..
Looks like you have to repartition the internal chip, then flash each partition via adb.
Also try to check if it gives red indicator when plugged in.
Hello, Dear XDA-Developers.
I was trying some custom ROMs but when I installed Viper4Android and flashed it using Magisk the phone stucks on boot
However I have another problem, I found out that the internal storage of my phone got too small after upgrading into another version of Android, so I wanted to get back to Android 5 stock firmware completed to format the internal storage and not partitioning it as I thought so I tried to flash it in TWRP recovery but sadly after that I bricked the bootloader and the recovery. Next, I decided to flash a board image ALE-L02&L21&L23_MAA001077_Board_Software_general_05021SJN using IMAGE Download Software - IDTML01Ver1001, Still, the process got interrupted maybe because the phone was restarting itself and now I'm getting a screen that shows error after showing Huawei Ascend logo. Is there any chance to fix this dead phone but consider that my pc is no longer detecting the driver that I used to flash the board image, and I can't even turn off the phone now except if I let the battery dies.
Notice: I don't dare to use test points if there is no other choice how much it usually costs to fix it?
Hey! I've got some real issues, please read my whole story and try to help me.
So, I've got Redmi 2 (wt80047) and I have installed an custom rom i.e..Atomic OS because that was the best of all, but I was facing issues of LTE network, it automatically disconnects, and then I have to restart my phone like 8-9 times to get the LTE network back , so I decided to switch back to stock ROM, and successfully I have re-installed my stock rom (MIUI8), afterwards I have downloaded some files like Magisk.zip and SuperSU.zip for rooting purpose, but I don't know what happened but my device was bricked, it was not openinig, it was stucked at logo, it was neither going in Fastboot mode nor my pc was detecting the device so I can flash again it with MI Flash tool. The only thing that was happening was that multiples drives were showing on my windows whenever I connect my Redmi 2 to pc like E: drive, F; drive, G, H, I: drive. So i have opened an application (Disk Partition Tool) and deleted all the drives. Then my device was ****ed x100. Now it is totally dead. No response, no powering on, no vibration, no fastboot mode, but now my PC and MI Flash Tool is recognizing it with COM6 (ports), so now whenever I try to flash it. it gives me error "Cannot receive hello packet" and sometimes "Ping target failed". Please Help Me, Pleasee!
Some Things that I have already tried:-
1.Tried every version of Mi Flash Tool
2. Tried chineese and global rom version both
3. Tried QFIL
4. Tried every ports on my cpu
5. Cannot flash it with cmd, coz adb and fastboot both does not recognize my device (Waiting for device...)
6. Pressed the Power button and then flashed it.
7. Remove the battery, short the EDL points, I have tried all the hardware stuff also.
I am stucked in this for like 1 month, and I have only this phone, my parents won't give me a new one.
Help!)
Looks to me the phone was connected to Windows computer in USB-MTP mode, so the computer believed the phone to be a portable media player and/or USB-drive. Deleting partitions always causes a complete data loss. Hence it's not wondering me that the phone actually is dead: you fully wiped it.
jwoegerbauer said:
Looks to me the phone was connected to Windows computer in USB-MTP mode, so the computer believed the phone to be a portable media player and/or USB-drive. Deleting partitions always causes a complete data loss. Hence it's not wondering me that the phone actually is dead: you fully wiped it.
Click to expand...
Click to collapse
so, is there anything that I can do now?
Thanks