Database Users

[FIRMWARE][MT7-L09] Huawei Ascend Mate 7 - B130 [official,russian]

Ascend Mate7 Firmware(MT7-L09,V100R001C00B130,Nonspecific(Russian),Channel-Others,Android 4.4.2,EMUI 3.0,05012PVA)
-> consumer.huawei.com/kz/support/downloads/detail/index.htm?id=34301

Who has the 127 on it can save them. No advantages.
For open boat loader, the recovery_h60.img work with it.

You mean
a) Ascend Mate7 Firmware(MT7-L09,V100R001C00B127,CEE&Nordic European,Channel-Others,Android 4.4.2,EMUI 3.0,05012PGF)
or
b) MT7-L09 Firmware(V100R001C00B127,Norwegian,Channel-Others,Android 4.4.2,EMUI 3.0)
or
c) something unofficial like "b127.zip"
I think official 130 is better than unofficial 127 for some people.
Of course if you nordic european is better stay on official Nordic European 127, if you installed it

Volgot said:
You mean
a) Ascend Mate7 Firmware(MT7-L09,V100R001C00B127,CEE&Nordic European,Channel-Others,Android 4.4.2,EMUI 3.0,05012PGF)
or
b) MT7-L09 Firmware(V100R001C00B127,Norwegian,Channel-Others,Android 4.4.2,EMUI 3.0)
or
c) something unofficial like "b127.zip"
I think official 130 is better than unofficial 127 for some people.
Of course if you nordic european is better stay on official Nordic European 127, if you installed it
Click to expand...
Click to collapse
I assume it's an UNOFFICIAL firmware, or al least not still tested and not officially release trough OTA update...the kernel is still "dirty" like in B127.
Can someone advice the differences in performance between B127 and B130, please?
By the way, any suggestion on how to re-turn kernel into "official" one and remove the "dirty" info on it?

tuddu said:
I assume it's an UNOFFICIAL firmware
Click to expand...
Click to collapse
Since it on official huawei web page "consumer.huawei.com" it was officially published for consumers in Kazahstan
tuddu said:
or al least not still tested
Click to expand...
Click to collapse
Maybe consumers in Kazahstan are testers?
tuddu said:
and not officially release trough OTA update...
Click to expand...
Click to collapse
Maybe because you are not in Kazahstan..
tuddu said:
the kernel is still "dirty" like in B127.
Click to expand...
Click to collapse
The whole android "is still dirty", it's not ios

Be aware:
a. Before upgrade, please guarantee the version you use is Huawei official version, or else it may upgrade failed or cause unknown problem.
b. Don’t try to upgrade software of other country or customization, or else it may upgrade failed or cause unknown problem.

Volgot said:
Be aware:
a.Before upgrade, please guarantee the version you use is Huawei official version, or else it may upgrade failed or cause unknown problem.
b.Don’t try to upgrade software of other country or customization, or else it may upgrade failed or cause unknown problem.
Click to expand...
Click to collapse
I upgraded from B127 without any problem

Volgot said:
Be aware:
a.Before upgrade, please guarantee the version you use is Huawei official version, or else it may upgrade failed or cause unknown problem.
b.Don’t try to upgrade software of other country or customization, or else it may upgrade failed or cause unknown problem.
Click to expand...
Click to collapse
Upgraded my german b120, no Problem. Why should an other country be a problem?
Be sure you have stock recovery (and of course stock huawei rom (no kangvip)) and there should be no problems.
I tested b130 and i'm back on b120. Bluetooth is still buggy for me, my swr10 smartband is disconnected randomly from time to time. Very annoying.

desmoloch said:
Upgraded my german b120, no Problem. Why should an other country be a problem?
Be sure you have stock recovery (and of course stock huawei rom (no kangvip)) and there should be no problems.
I tested b130 and i'm back on b120. Bluetooth is still buggy for me, my swr10 smartband is disconnected randomly from time to time. Very annoying.
Click to expand...
Click to collapse
I never had problem with blutooth (I use it in my car for hands free only)
Btw, I have no problem to install any rom with cwm recovery via 3 buttons method.
What country you are from? Have you original stock image? I had big problem after bloody rom from China, with "custom fail" on any rom installed after that (even on 120)

Volgot said:
I never had problem with blutooth (I use it in my car for hands free only)
Btw, I have no problem to install any rom with cwm recovery via 3 buttons method.
What country you are from? Have you original stock image? I had big problem after bloody rom from China, with "custom fail" on any rom installed after that (even on 120)
Click to expand...
Click to collapse
From germany, stock recovery and 120 Rom. Ah Ok i thought problems could only be if cwm is installed.
I upgraded with the huawei APP (upgrade in dload folder in SD card). That worked fine.
My bluetooth is working too, but 24/7 connection is a Problem. My smartband is connected all the time and i activated the "vibrate when out of range" Option. Randomly about every two hours my smartband vibrates even its in range. My mate shows disconnected, connected, disconnected... and so on. Thats why i am back on b120

desmoloch said:
From germany, stock recovery and 120 Rom. Ah Ok i thought problems could only be if cwm is installed.
I upgraded with the huawei APP (upgrade in dload folder in SD card). That worked fine.
My bluetooth is working too, but 24/7 connection is a Problem. My smartband is connected all the time and i activated the "vibrate when out of range" Option. Randomly about every two hours my smartband vibrates even its in range. My mate shows disconnected, connected, disconnected... and so on. Thats why i am back on b120
Click to expand...
Click to collapse
Hi, i have a smartband Sony too, i have the same problem. With the b120 version worls ok but now with b130 disconnected all the time. How can i go back to version b120?
Enviado desde mi HUAWEI MT7-L09 mediante Tapatalk

I'm in France now with a french version of mt7-l09, and I'm looking for a full french stock factory image (not just a rom update)

Volgot said:
I'm in France now with a french version of mt7-l09, and I'm looking for a full french stock factory image (not just a rom update)
Click to expand...
Click to collapse
Hi,
Just flash this mega.co.nz/#!SJJzlaIa!y8rWY2XEStae6psg7NI_B_beW_BIZIf5tmov5Bc11rQ (B120SP04) which is a full factory image, flashable just as a local update, within the system or with the stock recovery, HM7 comes with this version in France), and you'll have the Western-European HM7.
Don't worry, HM7 in France are MT7-L09 too, and comes with the above ROM.
This image contains everything : CUST, KERNEL, BASEBAND, SYSTEM partition etc...
Welcome to France!

Inxs05 said:
Hi, i have a smartband Sony too, i have the same problem. With the b120 version worls ok but now with b130 disconnected all the time. How can i go back to version b120?
Enviado desde mi HUAWEI MT7-L09 mediante Tapatalk
Click to expand...
Click to collapse
Can anybody help me?
Enviado desde mi HUAWEI MT7-L09 mediante Tapatalk

I was on 127 with CWM recovery and root, flashed stock recovery and flashed local update 130 today. Everything is working fine, I flashed it because newer kernel in this version.

Inxs05 said:
Hi, i have a smartband Sony too, i have the same problem. With the b120 version worls ok but now with b130 disconnected all the time. How can i go back to version b120?
Enviado desde mi HUAWEI MT7-L09 mediante Tapatalk
Click to expand...
Click to collapse
Thank you!! Thats means i am not the only one
Back to b120 is the same as upgrade: place the b120 update.app in the folder dload on your SD card and update with huawai update APP (local update)

desmoloch said:
Thank you!! Thats means i am not the only one
Back to b120 is the same as upgrade: place the b120 update.app in the folder dload on your SD card and update with huawai update APP (local update)
Click to expand...
Click to collapse
Ok, then this is the only version that works with our smartband, no?
Enviado desde mi HUAWEI MT7-L09 mediante Tapatalk
---------- Post added at 11:41 PM ---------- Previous post was at 11:08 PM ----------
Anybody can tell me the link with the version B120? Thanks

Inxs05 said:
Ok, then this is the only version that works with our smartband, no?
Enviado desde mi HUAWEI MT7-L09 mediante Tapatalk
---------- Post added at 11:41 PM ---------- Previous post was at 11:08 PM ----------
Anybody can tell me the link with the version B120? Thanks
Click to expand...
Click to collapse
yes b120 is the only one i tried b127 and b130. Both have problems with 24/7 bluetooth connection. Random disconnects...
Link for b120: https://mega.co.nz/#!RsEVTAqb!aoyRaSbyzF1b7sLr8gAWsXfjVdk_6DCneSWcWmkzE3k

What does this B130 change?
Is there anyone flashed it?

Cooper100 said:
Hi,
Just flash this mega.co.nz/#!SJJzlaIa!y8rWY2XEStae6psg7NI_B_beW_BIZIf5tmov5Bc11rQ (B120SP04) which is a full factory image, flashable just as a local update, within the system or with the stock recovery, HM7 comes with this version in France), and you'll have the Western-European HM7.
Don't worry, HM7 in France are MT7-L09 too, and comes with the above ROM.
This image contains everything : CUST, KERNEL, BASEBAND, SYSTEM partition etc...
Welcome to France!
Click to expand...
Click to collapse
Thank you (downloaded) it's exactly the same (western european) I have allready from Huawei Italy consumer web page.. Unfortunately, I have "cust fail" at the end on every update with every rom via all three methods (local update, three buttons, hisuite) As a result, everything works but without "cust***" version in "about phone" and without some other (not critical) things.. (and no french apps installed by default) I've tried all roms (so I found this b130)..
HK_Jason_L said:
What does this B130 change?
Is there anyone flashed it?
Click to expand...
Click to collapse
feels like 127, with some russian apps (ivi, yandex search, etc)

Introducing FunkyHuawei - Flash any official firmware on your Mate 9, BL Lock OK!

Check the details in post #2.

---AS OF JANUARY 26, 2017 (JAPAN TIME)---
I want to thank all the users of the original FunkyHuawei. I have decided to expand FunkyHuawei to be useful to even more people, by supporting all recent Huawei phones, adding automation to find and add the latest firmware, and so on. Because of this, I can no longer offer FunkyHuawei as a donation-based program. I will be happy to continue to provide technical support on XDA, if it's welcome here. Feel free to get in touch if you have any questions.
FunkyHuawei 2.0 is now live at
Instructions are available at
You can check supported models at:
Some of the supported models include:
GR5 2017
Honor 6x
Mediapad M3
Y6 II
Nova
P9
Honor8
Honor V8
Honor8 Note
Mate 9 Pro/Porsche
Mate 9
Nova Plus
Honor 5c
GT3
Mate 8
P9 Plus
P9 Lite
(Others)

Well done, brother :highfive:.

opasha said:
Well done, brother :highfive:.
Click to expand...
Click to collapse
BTW, your transaction ID from the previous donation you made is in the database, so feel free to use it.

duraaraa said:
BTW, your transaction ID from the previous donation you made is in the database, so feel free to use it.
Click to expand...
Click to collapse
Awesome, thank you! Getting ready to finally open up my phone today and request the bootloader unlock by calling Huawei as @Tkkg1994 suggested. Going to install TWRP and root (the big thing I was waiting for - once you root, it's hard to go back to stock, lol). I hope we get xposed soon...I read in the recent xda article that it's almost there for Nougat.

opasha said:
Awesome, thank you! Getting ready to finally open up my phone today and request the bootloader unlock by calling Huawei as @Tkkg1994 suggested. Going to install TWRP and root (the big thing I was waiting for - once you root, it's hard to go back to stock, lol). I hope we get xposed soon...I read in the recent xda article that it's almost there for Nougat.
Click to expand...
Click to collapse
Yes. If you have unlocked bootloader and this tool, you can do anything

I am a complete newbie in this so I have a question:
my unit is model mha-al00 ...its bought in china.
my question is, is it possible to flash it with south east asian firmware I.e. singaporean firmware, and if so, which firmware number is that and is it available on Duaraa server?
if not, then if I flash with european firmware, will all functionality and software features of the phone work without problem?
thanks and sorry if I asked stupid questions.
---------- Post added at 02:54 PM ---------- Previous post was at 02:51 PM ----------
one more question, is there such thing as international firmware? is that the same as european firmware?
---------- Post added at 03:08 PM ---------- Previous post was at 02:54 PM ----------
so by flashing non chinese firmware, can someone confirm that app twin will allow using double whatsapp account instead of wechat?

ewijaya74 said:
I am a complete newbie in this so I have a question:
my unit is model mha-al00 ...its bought in china.
my question is, is it possible to flash it with south east asian firmware I.e. singaporean firmware, and if so, which firmware number is that and is it available on Duaraa server?
if not, then if I flash with european firmware, will all functionality and software features of the phone work without problem?
thanks and sorry if I asked stupid questions.
---------- Post added at 02:54 PM ---------- Previous post was at 02:51 PM ----------
one more question, is there such thing as international firmware? is that the same as european firmware?
---------- Post added at 03:08 PM ---------- Previous post was at 02:54 PM ----------
so by flashing non chinese firmware, can someone confirm that app twin will allow using double whatsapp account instead of wechat?
Click to expand...
Click to collapse
Yes, European firmware is basically international firmware. It's actually updated more quickly than south asia region firmware. You should try and flash it and see if you like it. Basically, the firmware is all either Chinese or non-Chinese. The non-Chinese firmwares are more or less the same.
You will lose some functionality here and there. Themes will not work any more, for example. Your biggest gain will be better google integration. Please try it and see. Should you want to, you can always flash back to Chinese firmware afterwards.
App twin will not work with WhatsApp unless you unlock your bootloader and flash a non-Chinese oeminfo. I have done that, but you need to get the unlock code from Huawei.

Since I'm on MHA-L29 C636b110 South Asian firmware and want to be up to date:
1) Should I just change my dns to your recommended dns in the B126 thread as @alexhee did and update via OTA before unlocking my bootloader and proceeding to install twrp and root?
OR
2) Should I use this thread's method, permanently change my oeminfo to non-chinese C432, update to latest B126 via OTA, unlock my bootloader, and proceed to install twrp and root?
**Should my bootloader be unlocked before any of the two methods above?**
Really appreciate any help and advice on BEST method to keep all functionality.

opasha said:
Since I'm on MHA-L29 C636b110 South Asian firmware and want to be up to date:
1) Should I just change my dns to your recommended dns in the B126 thread as @alexhee did and update via OTA before unlocking my bootloader and proceeding to install twrp and root?
OR
2) Should I use this thread's method, permanently change my oeminfo to non-chinese C432, update to latest B126 via OTA, unlock my bootloader, and proceed to install twrp and root?
**Should my bootloader be unlocked before any of the two methods above?**
Really appreciate any help and advice on BEST method to keep all functionality.
Click to expand...
Click to collapse
Because you have the South Asian firmware, I may have to make modifications to support your device on this server.
Please give it a try using the free code, and see if it works.

duraaraa said:
Because you have the South Asian firmware, I may have to make modifications to support your device on this server.
Please give it a try using the free code, and see if it works.
Click to expand...
Click to collapse
Ok will do, thanks. So, it's better to change my oeminfo by doing your FunkyHuawei method as opposed to changing the DNS on the router and downloading the B126 OTA via system update as @alexhee did? http://forum.xda-developers.com/mate-9/how-to/ota-b126-available-france-t3514682/page3

duraaraa said:
Because you have the South Asian firmware, I may have to make modifications to support your device on this server.
Please give it a try using the free code, and see if it works.
Click to expand...
Click to collapse
As I understand until now, you only support Chinese and European phone version, and convert the firmware between this two, right?
So if I have C185B110, I can't flash with your method?

dancrow said:
As I understand until now, you only support Chinese and European phone version, and convert the firmware between this two, right?
So if I have C185B110, I can't flash with your method?
Click to expand...
Click to collapse
You should be able to flash any of the European firmwares using the HiSuite method. eRecovery method will not work unless I customize a version for your phone.

I've just tested the method (China => EU) works flawlessly. Thanks a lot

opasha said:
Ok will do, thanks. So, it's better to change my oeminfo by doing your FunkyHuawei method as opposed to changing the DNS on the router and downloading the B126 OTA via system update as @alexhee did? http://forum.xda-developers.com/mate-9/how-to/ota-b126-available-france-t3514682/page3
Click to expand...
Click to collapse
If you're going to change oeminfo, my FunkyHuawei method will be a portion of what you do, but you'll also need BL unlock and TWRP to completely change oeminfo. Basically, what you should do is PM me for more information once your BL is unlocked, and I'll walk you through it step by step because it's a delicate process and I don't want you to get a brick.

duraaraa said:
If you're going to change oeminfo, my FunkyHuawei method will be a portion of what you do, but you'll also need BL unlock and TWRP to completely change oeminfo. Basically, what you should do is PM me for more information once your BL is unlocked, and I'll walk you through it step by step because it's a delicate process and I don't want you to get a brick.
Click to expand...
Click to collapse
Thanks. I'll do that once I get my BL unlock. Have to wait for Huawei China to open in 8 hours in order to call because Huawei UK won't unlock it since the phone is Asia Pacific region.

duraaraa said:
------------------------------
2. HiSuite
------------------------------
This is where things get a little bit complicated. We use HiSuite to install non-authorized ROMs. For example, betas, or other ROMs that Huawei does not want people to install. From FunkyHuawei, you will see a link of a tool to download. You must download this tool if you wish to use the HiSuite installation method.
Click to expand...
Click to collapse
Sorry for this, but I can't find/see the link for the tool on your site. Can you tell how can I download FunkyHisuite.exe app?
Thanks

Latest firmware?
How do I know which firmware is the latest ??
I have the duo sim EU version.
With yesterday the OTA 126 downloaded...
I saw on YouTube a 135 firmware..?
Thanx!!

Installation error (CHINA-TO-EURO)
I've set DNS correctly (verified by successfully getting to www dot funky huawei dot com. I requested the CHINA-TO-EURO firmware (and got "request successful), entered eRecovery on the phone, and went to download. As expected, firmware name was "FunkyHuawei". It gets all the way through the download process, but then at about 81% of installation, I get "Recovery failed" with an exclamation mark.
My phone is a MHA-AL00 running Chinese firmware.
Any ideas?

Does your tool supports the huawei mate 9 pro?

Need of Huawei Y5 (2017)'s Custom Recovery

Friends, I just got a Huawei Y5 (2017)...
and I need a custom recovery for it to install Supersu ( I do not want to install any other root options )...
I searched Custom Recovery for this phone in Google...but I didn't find any...
So If you can just help me out...
Model Number - MYA-U29
Build Number - Maya-U29C636B106
EMUI Version - EMUI 4.1
Android Version - 6.0

http://www.modaco.com/forums/topic/376807-recovery-twrp-302-0-for-huawei-y5/
Sent from the beige bra section at Target.

i am in grave need of custom recovery for huawei y5 2017 mya u29
plz stok recovery will also do.
helppppp

did you find the firmware?
Xitiz1 said:
i am in grave need of custom recovery for huawei y5 2017 mya u29
plz stok recovery will also do.
helppppp
Click to expand...
Click to collapse
did you find the firmware?

hello
i flashed huawei y5 2017 twrp and wanted back to stock recovery tried with adb , now i have no android os neither twrp , phone just shows huawei logo and restarts itself again and again, cant turn on or off , no vol up/down and power buttons work , can anyone help ? is there way to restore or isntall stock rom in this situation or phone is junk now ? (just showing huawei logo and keeps restarting itself) thank you
its huawei y5 2017 mya-L22

Found twrp for Huawei y5 2017 MYA-L22
I found twrp recovery and successfully installed it on my Huawei y5 2017 MYA-L22.

kkboss said:
I found twrp recovery and successfully installed it on my Huawei y5 2017 MYA-L22.
Click to expand...
Click to collapse
Care to tell us which version?. I can't seem to find one that works.

raffieltiger said:
Care to tell us which version?. I can't seem to find one that works.
Click to expand...
Click to collapse
I found it on romprovider(dot)com
Sorry, I couldn't post outside links.
Its twrp 3.1
---------- Post added at 05:15 AM ---------- Previous post was at 05:13 AM ----------
Aleko91 said:
i flashed huawei y5 2017 twrp and wanted back to stock recovery tried with adb , now i have no android os neither twrp , phone just shows huawei logo and restarts itself again and again, cant turn on or off , no vol up/down and power buttons work , can anyone help ? is there way to restore or isntall stock rom in this situation or phone is junk now ? (just showing huawei logo and keeps restarting itself) thank you
its huawei y5 2017 mya-L22
Click to expand...
Click to collapse
I have the same problem. Did you find a solution?

kkboss said:
I found it on romprovider(dot)com
Sorry, I couldn't post outside links.
Its twrp 3.1
Click to expand...
Click to collapse
Found it but the download link isn't available. Can you please attach it to a post so that I may try it?.

raffieltiger said:
Found it but the download link isn't available. Can you please attach it to a post so that I may try it?.
Click to expand...
Click to collapse
https://androidfilehost.com/?fid=673791459329051922

kkboss said:
I found it on romprovider(dot)com
Sorry, I couldn't post outside links.
Its twrp 3.1
---------- Post added at 05:15 AM ---------- Previous post was at 05:13 AM ----------
I have the same problem. Did you find a solution?
Click to expand...
Click to collapse
solution was repair motherboard , now i flashed twrp again and works well
https://ufile.io/06kfy
twrp 3.2.1 for huawei y5 2017 4g myaL22

kkboss said:
I found twrp recovery and successfully installed it on my Huawei y5 2017 MYA-L22.
Click to expand...
Click to collapse
i'm stucked on the swipe screen of the twrp..have you faced this problem??

kodo2010 said:
i'm stucked on the swipe screen of the twrp..have you faced this problem??
Click to expand...
Click to collapse
me too,have u solve it ???
---------- Post added at 06:52 AM ---------- Previous post was at 06:36 AM ----------
Aleko91 said:
solution was repair motherboard , now i flashed twrp again and works well
https://ufile.io/06kfy
twrp 3.2.1 for huawei y5 2017 4g myaL22
Click to expand...
Click to collapse
could you link the recovery again as it require payment :crying:

bishoy ashraf said:
me too, have u solve it ???
---------- Post added at 06:52 AM ---------- Previous post was at 06:36 AM ----------
could you link the recovery again as it requires payment: crying:
Click to expand...
Click to collapse
yeah it was easy to fix
just press with two fingers on the screen while waiting for twrp to open
that would fix the bug
hope it works

kodo2010 said:
yeah it was easy to fix
just press with two fingers on the screen while waiting for twrp to open
that would fix the bug
hope it works
Click to expand...
Click to collapse
thanks man I appreciate it ???

Mya-u29 fw SPFT
Need firmware for MYA-U29 for SPFT. The phone reacts only to PC connection. sees COM port MTK. ty

For those who tried to download this TWRP, its in Russian Language. (yes, the TWRP is in RUS lang).
Sadly, I cannot give link to translate the TWRP.
For those who need the translated TWRP, please search through Google
"TWRP Translate from Chinese to English"
It works.

Update problem.

Hi everyone. Im having a problem and im losing my mind and getting so confused that I have to ask you for help. I have a Huawei mate 8 nxt-l29 with software versión nxt-l29c900b156 and im not getting the update for nougat. I've read that its because my cust versión and that I should change it. Is there a way or can anyone guide me though with which software versión should I install? I dont know what else to do, everyone says to install different versions to get the official OTA. which one should I use and how can I do it? Thanks!!

there is a guide using dc phoenix but you pay 15 euros to install nougat you change region to debrend l29 version and after you get all the updates together first all marshmallow fixes and after all nougat versions from b560 to b582
---------- Post added at 05:15 AM ---------- Previous post was at 05:13 AM ----------
i was having same rom as you it easy put you pay one time there is a guide here on this forum of mate 8 how to do it

nikolas60 said:
there is a guide using dc phoenix but you pay 15 euros to install nougat you change region to debrend l29 version and after you get all the updates together first all marshmallow fixes and after all nougat versions from b560 to b582
---------- Post added at 05:15 AM ---------- Previous post was at 05:13 AM ----------
i was having same rom as you it easy put you pay one time there is a guide here on this forum of mate 8 how to do it
Click to expand...
Click to collapse
yea i could do that but im an enthusiast and i like a lot to change and experiment roms,i just need a guide of how to do it,that's how i always did it with all my phones,pay for someone to do it would not be very nice,but if that's the last option and nobody can help me then there will be no choice haha.thank you very much for you reply!!

lvrksn said:
yea i could do that but im an enthusiast and i like a lot to change and experiment roms,i just need a guide of how to do it,that's how i always did it with all my phones,pay for someone to do it would not be very nice,but if that's the last option and nobody can help me then there will be no choice haha.thank you very much for you reply!!
Click to expand...
Click to collapse
Use SRK tools, see videos on how to do with that. All is available here. You will be able to do easily yourself.
For dual SIM and better battery and a few added functionalities, go for Chinese ROM. DL will be perfect. AL is for single SIM.

apat26 said:
Use SRK tools, see videos on how to do with that. All is available here. You will be able to do easily yourself.
For dual SIM and better battery and a few added functionalities, go for Chinese ROM. DL will be perfect. AL is for single SIM.
Click to expand...
Click to collapse
the thing is this. in the back of the phone the model is nxt-tl00 but the rom versión has been changed to nxt-l29c900b156, I think this is the international version, I dunno how they did that because the phone came factory sealed. so I have this versión that I think is Chinese with this european rom, that's why im a little confused, can I directly install another european versión that allow me to get the update directly? I will see later how to unlock the bootloader that I've read that I need to do it first to install any rom. thank you very much for replying

lvrksn said:
the thing is this. in the back of the phone the model is nxt-tl00 but the rom versión has been changed to nxt-l29c900b156, I think this is the international version, I dunno how they did that because the phone came factory sealed. so I have this versión that I think is Chinese with this european rom, that's why im a little confused, can I directly install another european versión that allow me to get the update directly? I will see later how to unlock the bootloader that I've read that I need to do it first to install any rom. thank you very much for replying
Click to expand...
Click to collapse
Process is same whether you convert to another European or to Chinese. And it does not make any difference if your printed model is TL and you change to another version..
To get updates, after changing the version,you need to factory reset, lock bootloader, and put Stock recovery again. In most cases, you will get this all by default once you change your version and then when you upgrade from MM to Nougat.

Root for Huawei P9 Lite mini

Is it possible to root P9 Lite mini in the same way as P9 lite?

no! i use same metod with twrp for p9 lite...now im stuck in bootloop
can anyone help me with stock recovery? and mode to connect to pc?

Hi you all,
I've already tried to flash various ports of the official TWRP: prague, berlin, hi6250, duk, frd, vtr, greatslon, elite, meticulus etc. None seems to run, each one makes the phone stuck in a bootloop.
Does anyone know which the right one is?

I found this...
I found this but it did not adapt to the version of our team (In my case SLA-l03) you can try it and comment how it has gone
goo.gl / VGD9S2 Apparently the device has more than 3 names

Bolt00012 said:
I found this but it did not adapt to the version of our team (In my case SLA-l03) you can try it and comment how it has gone
goo.gl / VGD9S2 Apparently the device has more than 3 names
Click to expand...
Click to collapse
is yours maybe a Nova Lite 2017? If so, can you post here a link to direct download?
Is your phone a dual-SIM or a single-SIM?
Yours might be the right one.
I really appreciate all the help you can give me.
Thanks
---------- Post added at 10:13 PM ---------- Previous post was at 09:42 PM ----------
If I have understood correctly, SLA-L02 and SLA-L03 are single-SIM models.
SLA-L22 and SLA-L23 are dual-SIM models.
So yours should be good for mine, too.
As I don't know Russian, so I ask you to post a link to download it directly.
Thanks

Good news
The device has names like Nova Lite 2017, Huawei Enjoy 7, Y6 Pro 2017 and P9 Lite Mini.
That may be the case, SLA-L02 and SLA-L03 are unique SIM models.
SLA-L22 and SLA-L23 are dual SIM models. (In my case SLA-l03)
Good news, apparently the Russian friends have managed to release root on our device, only the SLA-L22 version, for those who do not want to risk the device it is not recommended to use the method.
- TRANSLATED BY ME, I FEEL IT FOR BAD TRANSLATIONS--
STEPS.
1.- you must unlock the boot manager. (There are already methods) (there will be a typical warning notification every time you turn on your smartphone)
2.- Say the post, you must have the SLA-L22C10B120 or SLA-L22C10B130 patch.
3.- Use of the ADB tools and flash boot.img
If you want to restore your original boot.img, I leave them both (Root and Original) (maybe the system language is in Russian)
Mention: Maybe it works in SLA-TL10 or SLA-AL00
I can not put direct links, delete spaces:
Link: med ia fire com
/file/plfbe6ly67upepb/SLA-22_and_TL00_AaL00.zip
---------- Post added at 03:41 AM ---------- Previous post was at 03:31 AM ----------
The Chinese version is SLA-TL10 and SLA-AL00.
The name changes at will to versions of the world, same firmware, different name SLA-22

Thanks.
Unfortunately, the build name installed on my device is SLA-L02C432B133.
As you can see, we have different region codes. So I can't install the patched boot image you suggested.
There are no Russian firmwares neither here nor here. As I can't find and flash any Russian firmware, so I can't flash this patched boot image.
European region code is C432 and Russian region code is C10.
What do you think about flashing this boot image file? Is it worth it? Did you try it on your device? Does it work?
Let me know

Bolt00012
Click to expand...
Click to collapse
I flashed the patched boot image file, but... Nothing happens, all remains the same.
It seems to be not pre-rooted. What do I have to do now?

SOLVED!
First, I installed Magisk Manager, then i flashed the prerooted patched_boot.img file. Now I have root permission.

breathislava said:
SOLVED!
First, I installed Magisk Manager, then i flashed the prerooted patched_boot.img file. Now I have root permission.
Click to expand...
Click to collapse
can confirm this is working, thank you!

Can I ask where did you get the original prerooted boot.img? thanks

breathislava said:
SOLVED!
First, I installed Magisk Manager, then i flashed the prerooted patched_boot.img file. Now I have root permission.
Click to expand...
Click to collapse
txmt5 said:
can confirm this is working, thank you!
Click to expand...
Click to collapse
Could you guys please make a guide ? Or at least give me PM

I wrote a guide to root this device here. Really hope it helps someone.

csrcelsorin said:
no! i use same metod with twrp for p9 lite...now im stuck in bootloop
can anyone help me with stock recovery? and mode to connect to pc?
Click to expand...
Click to collapse
model number and compilation number to help you

How can i do root on my SLA-L03?