Database Users

[SOLVED] My Samsung Galaxy Y GT-S5360 won't start

Hello everybody
My friend has a Samsung Galaxy Y GT-S5360 and since yesterday it won't start. It shows "Samsung Galaxy Y young" and doesn't start. So I decided to try to root it and install Jellyblast v3 but it's the same problem. I followed a tutorial and tried to wipe cache and data but still the same problem. So now I read that the people who had the same problem as me, resolved their problem by flashing the stock rom with odin. But I saw that we needed some information like PDA, PHONE and CSC but I can't have these informations as the phone won't start So I am going to follow a tutorial to flash it with odin. But I'm worried about bricking definitely her phone :s So I want to know if there is no risk to brick her phone if I try to flash a stock rom without knowing these information (PDA PHONE CSC).
Thanks for your help and sorry for my bad english °° !!

please look in my signature for easy flashguide,there is all info you need.its very newby friendly and believe me thats no problem,you just stuck on boot,its not so bad and easy to solve,you only need a uauable brain an eyes.i know u can do it.good luck

-CALIBAN666- said:
please look in my signature for easy flashguide,there is all info you need.its very newby friendly and believe me thats no problem,you just stuck on boot,its not so bad and easy to solve,you only need a uauable brain an eyes.i know u can do it.good luck
Click to expand...
Click to collapse
Thanks for your answer
I downloaded a package and indeed there are 3 files into the zip. But these file are PDA / CSC / MODEM and in your guide you mention a PHONE file, is that the MODEM file ?
EDIT: Sorry I found my answer ^^"

Maws59 said:
Thanks for your answer
I downloaded a package and indeed there are 3 files into the zip. But these file are PDA / CSC / MODEM and in your guide you mention a PHONE file, is that the MODEM file ?
EDIT: Sorry I found my answer ^^"
Click to expand...
Click to collapse
Don't say thanks buddy,,,,there is a thanks button already ,just press it to appriciate OP for the usefull post..:thumbup:
:thumbup: DON'T FORGET TO PRESS THANKS BUTTON IF I HAVE A BIT SUCCESS TO HELP YOU :thumbup:

Hello
We managed to install a package but there are no french language in the one we installed. But we have these information now:
PDA: S5360DXKJ3
PHONE: S5360DXKJ1
CSC : S5360OLBKJ2
Could you tell me which package we must install to have the french language please ?
Thanks a lot for your help !!
EDIT : If you saw my last edit I did a mistake when telling informations x)
EDIT : Problem solved : http://forum.xda-developers.com/picture.php?albumid=8046&pictureid=28987

problem persists
TECHNO_THUNDER said:
Don't say thanks buddy,,,,there is a thanks button already ,just press it to appriciate OP for the usefull post..:thumbup:
:thumbup: DON'T FORGET TO PRESS THANKS BUTTON IF I HAVE A BIT SUCCESS TO HELP YOU :thumbup:
Click to expand...
Click to collapse
odin doesnt show a yellow bar while i connect my device in download mode. what to do??
odin id not detecting my device

aditya22u said:
odin doesnt show a yellow bar while i connect my device in download mode. what to do??
odin id not detecting my device
Click to expand...
Click to collapse
try install sgy drivers http://forum.xda-developers.com/showthread.php?t=2327476 .

aditya22u said:
odin doesnt show a yellow bar while i connect my device in download mode. what to do??
odin id not detecting my device
Click to expand...
Click to collapse
You should install SGY driver first

gts5360
my phone is not starting after install cwm just showing samsung logo
help me i tryed to connect odin but not connect

heart428 said:
my phone is not starting after install cwm just showing samsung logo
help me i tryed to connect odin but not connect
Click to expand...
Click to collapse
you installed cwm how?
there is only to types of cwm for galaxy y
1 - tempory cwm zip - flashed in stock recovery to give you cwm - this zip must be flashed each time you enter recovery to bring up cwm
2 - perminant cwm - this is included in a custom kernel and replaces stock kernel and stock recovery with a custom kernel and recovery
if you flashed a kernel state which one it was
to use odin
download odin 3.07
download and install samsung usb drivers
put phone in download mode by pressing vol down home button power button until download screen appears
connect phone to pc via usb cable
press vol up to begin connection
wait for drivers to install
open odin
on the left hand side it should say under com:id com then a number in a coloured box if connected
then put
pda in pda
modem in phone
csc in csc
then start

Samsung Galaxy wont Start and cant acces the System recovery
Hi ! my Samsung Galaxy y young GT-s5360 wont start after my friend tried to Upgrade it,
After i've tried to open my phone, its Stuck on the Logo "Samsung Galaxy Y young GT-S5360"
i've tried to wait of almost 10 minutes but my phone still Freeze,I've also tried to Access the Samsung Sytem recovery but it wont appear on my Screen
pls. Help me

pls. Help me
Click to expand...
Click to collapse
u phone got brick. please read previous post. u problem can be solved by use Odin.

You can flash stock rom without odin..but you need CWM

shyamSGY said:
You can flash stock rom without odin..but you need CWM
Click to expand...
Click to collapse
no you cant flash stock "firmware" without odin
if you flash a so called stock firmware via cwm all you are doing is flashing a custom rom with no modifications - slight technically difference

marcussmith2626 said:
no you cant flash stock "firmware" without odin
if you flash a so called stock firmware via cwm all you are doing is flashing a custom rom with no modifications - slight technically difference
Click to expand...
Click to collapse
By keeping a Nandroid backup in sdcard and restoring with Cwm..
I have ddle1 backup

shyamSGY said:
By keeping a Nandroid backup in sdcard and restoring with Cwm..
I have ddle1 backup
Click to expand...
Click to collapse
wouldnt work though if you changed your file system to ext to use cm7/9/cyanmobile/pa
you can only restore a nandroid backup fully if you restore it on the kernel on which it was made and you are on the same file system as it was made although you can advanced restore if on different kernel and should work if it can verify md5 sum

hemmm
marcussmith2626 said:
you installed cwm how?
there is only to types of cwm for galaxy y
1 - tempory cwm zip - flashed in stock recovery to give you cwm - this zip must be flashed each time you enter recovery to bring up cwm
2 - perminant cwm - this is included in a custom kernel and replaces stock kernel and stock recovery with a custom kernel and recovery
if you flashed a kernel state which one it was
to use odin
download odin 3.07
download and install samsung usb drivers
put phone in download mode by pressing vol down home button power button until download screen appears
connect phone to pc via usb cable
press vol up to begin connection
wait for drivers to install
open odin
on the left hand side it should say under com:id com then a number in a coloured box if connected
then put
pda in pda
modem in phone
csc in csc
then start
Click to expand...
Click to collapse
what i should put at those pda,phone and csc ? sorry, i'm newbie

IsyrafSan said:
what i should put at those pda,phone and csc ? sorry, i'm newbie
Click to expand...
Click to collapse
Don't understand the question sorry
Like I said - download the firmware from my firmware thread & follow all the instructions
Pda goes in pda
Modem goes in phone
CSC goes in csc
Please follow all instructions on my firmware thread - links in signature

Need help flashing phone back to stock

Hi guys,
My S4 i9505 is currently flashed to Omega ROM and I want to flash it back to stock.
I have checked samfirmware but I can't locate firmware for my region/network (EE/United Kingdom).
Can anyone explain to me how I can get back to stock?
Cheers

What?.Im running the software and I got it from sammobile.
EVR or BTU take your pick...

cined said:
Hi guys,
My S4 i9505 is currently flashed to Omega ROM and I want to flash it back to stock.
I have checked samfirmware but I can't locate firmware for my region/network (EE/United Kingdom).
Can anyone explain to me how I can get back to stock?
Cheers
Click to expand...
Click to collapse
Here you go mate EE/UK or this Tera but the download is slow Have a nice day.

Repulsa said:
Here you go mate EE/UK or this Tera but the download is slow Have a nice day.
Click to expand...
Click to collapse
Thanks mate much appreciated.
Which option do I flash it under in Odin? I forgot. :silly:

cined said:
Thanks mate much appreciated.
Which option do I flash it under in Odin? I forgot. :silly:
Click to expand...
Click to collapse
No problem. open odin and select PDA/AP. and flash away, or follow this instruction. have a nice day
Instructions For Flashing Firmware:
- Extract (unzip) the firmware file
- Download Odin3 v3.09
- Extract Odin .ZIP file
- Open Odin3 v3.09
- Restart phone in download mode (Press and hold Power + Volume down buttons)
- Connect phone and wait until you get a blue sign in Odin
- Add the file you download in to AP
- Make sure re-partition is NOT ticked
- Click start button, sit back and wait a few minutes.
- If you encounter any issues with the firmware (Any FC, Bootloop etc)
- Boot into recovery mode (Home+power+vol up)
- Choose to wipe/factory reset. (THIS WILL ERASE ALL OF YOUR DATA INCLUDING YOUR INTERNAL SD CARD!)
- Then choose reboot and you should be good to go!

Repulsa said:
No problem. open odin and select PDA/AP. and flash away, or follow this instruction. have a nice day
Instructions For Flashing Firmware:
- Extract (unzip) the firmware file
- Download Odin3 v3.09
- Extract Odin .ZIP file
- Open Odin3 v3.09
- Restart phone in download mode (Press and hold Power + Volume down buttons)
- Connect phone and wait until you get a blue sign in Odin
- Add the file you download in to AP
- Make sure re-partition is NOT ticked
- Click start button, sit back and wait a few minutes.
- If you encounter any issues with the firmware (Any FC, Bootloop etc)
- Boot into recovery mode (Home+power+vol up)
- Choose to wipe/factory reset. (THIS WILL ERASE ALL OF YOUR DATA INCLUDING YOUR INTERNAL SD CARD!)
- Then choose reboot and you should be good to go!
Click to expand...
Click to collapse
Thanks for the help guys but on that linked ROM I think I might be getting a bit of battery drain?
Is there another stock rom I could try?
Cheers

cined said:
Thanks for the help guys but on that linked ROM I think I might be getting a bit of battery drain?
Is there another stock rom I could try?
Cheers
Click to expand...
Click to collapse
boot into recovery and Wipe cache/Factory reset then boot into download mode and reflash the stock rom again Via odin , Here you can find any stock rom from samsung base in your country http://www.sammobile.com/firmwares/2/ . have a nice day.

[Q]Can't install custom recovery on s4

Hi, i have a problem when i try to install the custom recovery of philz. (The latest one for s4 6.53.9)
I have a samsung s4 black edition. I did all the steps on the guide, but when i install the custom recovery i only get "reset" on odin and nothing happened on the phone. On download mode it say that i have a custom firmware but the knox warranty flag has not tripped.
If anyone have an answer please help.

TenshiSenpai said:
Hi, i have a problem when i try to install the custom recovery of philz. (The latest one for s4 6.53.9)
I have a samsung s4 black edition. I did all the steps on the guide, but when i install the custom recovery i only get "reset" on odin and nothing happened on the phone. On download mode it say that i have a custom firmware but the knox warranty flag has not tripped.
If anyone have an answer please help.
Click to expand...
Click to collapse
Can you please link the guide you have followed?
What black edition version do you have? I9500 or I9505, i understand there are 2 versions depending on region.
Is the bootloader unlocked?
What version Odin are you using?
Remember to reboot into recovery by holding volume up while turning power on after flashing.
Holding volume down gives you download mode.
Did you put the recovery package in the PDA tab?

I use odin 3.07 and used the guide of philz. I tryed with auto reboot and without auto reboot on odin, i put the tar.md5 file on pda without anything else. The only other option ticked was f.reset time.
Sent from my GT-I9505 using XDA Free mobile app

Bump

Noone knows anything? Please help, I can't do anything with the phone in this state. I can't install the official firmware nor the recovery too.

Uncheck auto-reboot in Odin.
if problem persists:
Different usb cable
Different usb port
Make sure Kies is not running in the background.

Already done all that stuff,
Any other suggestions?

TenshiSenpai said:
Already done all that stuff,
Any other suggestions?
Click to expand...
Click to collapse
Hi,
You are using Odin 3.07 try with Odin 3.09
Download tar file again or a different one , is a new one for the I9505
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/jflte/philz_touch_6.55.0-jflte.zip.md5/

MAX 404 said:
Hi,
You are using Odin 3.07 try with Odin 3.09
Download tar file again or a different one , is a new one for the I9505
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/jflte/philz_touch_6.55.0-jflte.zip.md5/
Click to expand...
Click to collapse
In odin 3.07 I was putting the tar.md5 in PDA, where should I put it now? Because your file is in .zip.md5 and I can't put it in any slot.

TenshiSenpai said:
In odin 3.07 I was putting the tar.md5 in PDA, where should I put it now? Because your file is in .zip.md5 and I can't put it in any slot.
Click to expand...
Click to collapse
Hi,
Sorry that was the zip version , this is the tar version
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/jflte/philz_touch_6.53.9-jflte.tar.md5/
for I9505 international
Better use odin 3.09

MAX 404 said:
Hi,
Sorry that was the zip version , this is the tar version
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/jflte/philz_touch_6.53.9-jflte.tar.md5/
for I9505 international
Better use odin 3.09
Click to expand...
Click to collapse
I put it in Ap slot and then started but when it finish shows only reset and after few minutes without touching anything it change on Passed!
Then I unplugged the pone and tried home+vol up + power but it doesn't go in the recovery sistem menu

TenshiSenpai said:
I put it in Ap slot and then started but when it finish shows only reset and after few minutes without touching anything it change on Passed!
Then I unplugged the pone and tried home+vol up + power but it doesn't go in the recovery sistem menu
Click to expand...
Click to collapse
Remember to release the 3 button combination after the samsung logo shows up

MAX 404 said:
Remember to release the 3 button combination after the samsung logo shows up
Click to expand...
Click to collapse
thank you so much i tried to remove the outo reboot on odin and it worked, really thanks! just another information: with this recovery can i backup all my phone or i need to install another version?

TenshiSenpai said:
thank you so much i tried to remove the outo reboot on odin and it worked, really thanks! just another information: with this recovery can i backup all my phone or i need to install another version?
Click to expand...
Click to collapse
Glad is working
Yes you can make a nandroid , go to backup and restore choose your backup destination ( recommend external SD)

XEF MM firmware image [Google Drive]

Couldn't find anyone else having posted this.
Here's a Google Drive link to the XEF MM firmware
G920FXXU3DPAD_G920FOXA3DPAE_G920FXXU3DPAD

thanks man, i am rooted and custom rom on 5.1.1 G920F (unlocked) and i don't live in europe,
can i flash this rom? or should i wait for UK or UAE for example??
will i be able to root it in the future?
and can you please give me a small tutorial on how to flash it?
im sorry for a lot of questions

esist said:
Couldn't find anyone else having posted this.
Here's a Google Drive link to the XEF MM firmware
G920FXXU3DPAD_G920FOXA3DPAE_G920FXXU3DPAD
Click to expand...
Click to collapse
Do you need to flash any bootloader or can you just flash it with odin

What is the build date?

the tech blog on insta said:
Do you need to flash any bootloader or can you just flash it with odin
Click to expand...
Click to collapse
You can flash with Odin.
Build date is 22 January

how to flash it man?

mzatari said:
how to flash it man?
Click to expand...
Click to collapse
1.Extract (unzip) the firmware file
2.Download Odin v3.10.7
3.Extract Odin ZIP file
4.Open Odin v3.10.7
5.Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
6.Connect phone and wait until you get a blue sign in Odin
7.Add the firmware file to AP / PDA
8.Make sure re-partition is NOT ticked
9.Click the start button, sit back and wait few minutes

Is there a way to root this version?

Do you have the pit file to make the repartition with this firm?
Thanks a lot.

fifthelement said:
1.Extract (unzip) the firmware file
2.Download Odin v3.10.7
3.Extract Odin ZIP file
4.Open Odin v3.10.7
5.Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
6.Connect phone and wait until you get a blue sign in Odin
7.Add the firmware file to AP / PDA
8.Make sure re-partition is NOT ticked
9.Click the start button, sit back and wait few minutes
Click to expand...
Click to collapse
Thanks man, without any modems or any additional files?
Im on rooted 5.1.1 G920F

erchewy said:
Do you have the pit file to make the repartition with this firm?
Thanks a lot.
Click to expand...
Click to collapse
I flashed this without flashing any pit on 5.1.1 XSG and it worked perfectly. I dont know why people flash pits !

erchewy said:
Do you have the pit file to make the repartition with this firm?
Thanks a lot.
Click to expand...
Click to collapse
I'd also like to know this. What PIT file should we use? It doesn't work for me without a PIT file atleast.

mzatari said:
Thanks man, without any modems or any additional files?
Im on rooted 5.1.1 G920F
Click to expand...
Click to collapse
Yes.
---------- Post added at 02:27 PM ---------- Previous post was at 02:27 PM ----------
Powerpuffman said:
I'd also like to know this. What PIT file should we use? It doesn't work for me without a PIT file atleast.
Click to expand...
Click to collapse
What error message do you get ? I flashed this without any pit from 5.1.1 stock XSG.

Is this operation wipe internal storage ? Thanks

fifthelement said:
1.Extract (unzip) the firmware file
2.Download Odin v3.10.7
3.Extract Odin ZIP file
4.Open Odin v3.10.7
5.Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
6.Connect phone and wait until you get a blue sign in Odin
7.Add the firmware file to AP / PDA
8.Make sure re-partition is NOT ticked
9.Click the start button, sit back and wait few minutes
Click to expand...
Click to collapse
it gives me "fail" everytime

Worked first time Thanks.

fifthelement said:
1.Extract (unzip) the firmware file
2.Download Odin v3.10.7
3.Extract Odin ZIP file
4.Open Odin v3.10.7
5.Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
6.Connect phone and wait until you get a blue sign in Odin
7.Add the firmware file to AP / PDA
8.Make sure re-partition is NOT ticked
9.Click the start button, sit back and wait few minutes
Click to expand...
Click to collapse
does that trigger knox? I am on DBT firmware ( German )

flex420 said:
does that trigger knox? I am on DBT firmware ( German )
Click to expand...
Click to collapse
No doesn't trip knox, as it is still official firmware. I just installed XEF in my PHN and have done this many times, as long as official, it will not trip knox.
Sent from my iPhone using Tapatalk

will this work on 920I?

Dancube said:
will this work on 920I?
Click to expand...
Click to collapse
No... we still have to wait.

[Help Thread] S8 Stuck in Bootloop And Stock ROM won't flash

https://forum.xda-developers.com/galaxy-s8/how-to/guide-how-to-install-twrp-root-galaxy-t3752480/
I have the G950f and I have enabled OEM Unlock and USB Debugging
When following this tutorial I ended up with a bootloop after flashing twrp (step 7) I got stuck at the samsung screen, but can access the download menu (I can't get into TWRP however). Trying to fix this, I downloaded the stock rom, selected all the files and clicked start but instead of flashing it went straight to pass (it says 0:02 next to it) . I am using the Home_CSC as detailed in the tutorial I followed. I have tried both Prince Comsy and regular Odin run as regular user and as admin. Since I cannot find a sollution on my own, I would appreciate your help. Thanks in advance!
Acclaiming

Try to download rom trough SamFirm
Extract what u get
Now copy the CSC File
Change .md5 to .rar
Extract .pit
Now Set everything in odin and check:
Auto reeboot
Re-Partition
F.reset time
Connect phone in download mode and hit start
Should work

Gruglu said:
Try to download rom trough SamFirm
Extract what u get
Now copy the CSC File
Change .md5 to .rar
Extract .pit
Now Set everything in odin and check:
Auto reeboot
Re-Partition
F.reset time
Connect phone in download mode and hit start
Should work
Click to expand...
Click to collapse
The home_csc or regular CSC?

If your flashing your rom use latest Odin 3.13.1
https://odindownloader.com/download/odin3-v3-13-1
Home CSC - keep user data
CSC - clean install - wipes user data
Try this thread instead for installing trwp
https://forum.xda-developers.com/ga...pment/recovery-twrp-galaxy-s8-exynos-t3595102
Use latest twrp 3.2.3.0
https://dl.twrp.me/dreamlte/

Acclaiming said:
The home_csc or regular CSC?
Click to expand...
Click to collapse
Regular. Worked for me. Had same problem

Gruglu said:
Regular. Worked for me. Had same problem
Click to expand...
Click to collapse
My phone ran out of battery overnight (I fell asleep on my desk) and now it won't turn on. Reddit says contact support, so I sent an email. Big L

Thank youuu
Gruglu said:
Try to download rom trough SamFirm
Extract what u get
Now copy the CSC File
Change .md5 to .rar
Extract .pit
Now Set everything in odin and check:
Auto reeboot
Re-Partition
F.reset time
Connect phone in download mode and hit start
Should work
Click to expand...
Click to collapse
THANK YOUUUU :good: :good: :good: :good:

Blooshie said:
THANK YOUUUU :good: :good: :good: :good:
Click to expand...
Click to collapse
No problem. Click Thanks btw
Had same problem and this worked for me