Database Users

How to restore back to stock kernel in galaxy y ? :( please help :( ?

i installed merruk technology kernel pre 2.0 final ... and now want to restore back to default kernel(stock) .. i have ddle1 stock rom running....
i tried restoring to stock kernel provided there on merruk kernels page but the kernel wont remove help me please
if i could get boot.img from ddle1 rom i would be greatful ...
or can someone tell me how to extract it from .md5 flashable rom i have ( through odin )
and when i try to flash a stock rom (ddle1 for instance ) through odin it shows this error.. the picture is attached below

chotu222 said:
i installed merruk technology kernel pre 2.0 final ... and now want to restore back to default kernel(stock) .. i have ddle1 stock rom running....
i tried restoring to stock kernel provided there on merruk kernels page but the kernel wont remove help me please
if i could get boot.img from ddle1 rom i would be greatful ...
or can someone tell me how to extract it from .md5 flashable rom i have ( through odin )
and when i try to flash a stock rom (ddle1 for instance ) through odin it shows this error.. the picture is attached below
Click to expand...
Click to collapse
You have to select Modem and CSC files too I guess

avinash9441 said:
You have to select Modem and CSC files too I guess
Click to expand...
Click to collapse
I tried with MODEM and CSC also i got FAIL !!!!! at top left box :crying::crying::crying:
here plz help

you sure you picked all 3 files? shud be ok by then .
Sent from my GT-S5360 using xda app-developers app

chotu222 said:
I tried with MODEM and CSC also i got FAIL !!!!! at top left box :crying::crying::crying:
here plz help
Click to expand...
Click to collapse
Download and flash through odin DDLC2_ODDLA2_DDLC2 or DDLE1_DDLD1_DDLE1. Even I had problem with DDLA3_DDLA2_DDLA2.
Hope it works now.

hmmm
Im really confused, because if you flashed merruk kernel and it did not work then just download recovery kernel..
put phone in download mode (power+home+volume down)
plug phone to pc while odin is open
choose recovery kernel on PDA option (don't check or uncheck anything)
flash it and it should work... lol
Stock : http://www.mediafire.com/?dzfcrhb8fj3s40x
Terma Kernel ; http://www.mediafire.com/?81d1acx1c19m9k5
Test Kernel ; http://www.mediafire.com/?0j6guwgg60opj7y
-----------------------------
iplaygalaxyy for android

chotu222 said:
i installed merruk technology kernel pre 2.0 final ... and now want to restore back to default kernel(stock) .. i have ddle1 stock rom running....
i tried restoring to stock kernel provided there on merruk kernels page but the kernel wont remove help me please
if i could get boot.img from ddle1 rom i would be greatful ...
or can someone tell me how to extract it from .md5 flashable rom i have ( through odin )
and when i try to flash a stock rom (ddle1 for instance ) through odin it shows this error.. the picture is attached below
Click to expand...
Click to collapse
It was happened to me before.. I have no choice but to flash to a fresh STOCK ROM with stock Kernel.
The SOLUTION would be ODIN. Go to Doky's thread and select the latest version of your firmware based on your country - download and extract.
Here's his thread : http://forum.xda-developers.com/showthread.php?t=1465800
Now, download ODIN if you're not having it yet. here's the thread - credits to OP : http://forum.xda-developers.com/showthread.php?t=1464775
Here's the instruction on how to flash to STOCK ROM and Kernel. http://forum.xda-developers.com/showpost.php?p=21846668&postcount=2
I did formatted my sd card extent that time too hope it helps.

anyone can help

Restore to Stock Kernel
Download the stock kernel ...
In Odin choose PDA and select the kernel
Flash it in Download Mode....

guys
i can only give you my solution....i was on hells kernel #50 and i wanted to revert to stock.....
i tried DOKY73 sirs stock roms but they didnt work.
thus, my and my friend YASH 98 modded it and now it works perfectly....
simply use these instead of the stock on DOKY73s thread.
http://d-h.st/tjd
[ Tested ] [ worked when sir dokys failed ]

how to remove meruuk kernel from g s5360[[[[[[samsung glaxy y]]]]]]]]
my build is GINGERBREAD.DDLF2
BASEBAND version isS5360DDLF1
KERNEL IS 2.6.35.7 Merruk [email protected]
I want to revert back to my stock kernel.please tell me how to do this.
I can't update my phone because of it.

Flash stock rom via odin. U can get all the requirements at sir doky73's thread.
What u need :
1. Odin
2. Your own country's firmware and totoro_0623.pit ( find it on the web. )
3. Usb drivers
4. A pc
5. Samsung usb cable
Extract the zip file u downloaded of your country's firmware. Open the odin.exe on your pc (windows ), then pit option choose totoro.pit, boot option choose boot, phone choose modem file, pda choose pda.
Finished press volume down + home button + power button to download mode on samsung galaxy y. Then screen turns on press volume up again. Connect the usb cable to your phone to pc.
Then odin recognises your phone and shows a yellow thing on the top. Then press start and wait for it to boot up !
Remember to press thanks ya !
Sent from my GT-S5360 using xda app-developers app

That ,or you can flash stock kernel via flashable zip. I remember seeing one in hells fusion thread.

A_Reloaded said:
That ,or you can flash stock kernel via flashable zip. I remember seeing one in hells fusion thread.
Click to expand...
Click to collapse
from where can i get a flashable zip of stock kernel??????

Idk. Search...
Try to get a boot.img of stock kernel.
Then search for Sgybicwm.zip in general section. Put the stock boot.img in root of your sdcard and flash sgybicwm.zip via cwm. You are done.
Any other boot.img flasher like faqbly wont work. I just tried it with hells fusion 50. it has a stock kernels boot.img inside stock folder of the kernels zip. Get that and sgybicwm.zip

[Bruce Wayne] said:
Idk. Search...
Try to get a boot.img of stock kernel.
Then search for Sgybicwm.zip in general section. Put the stock boot.img in root of your sdcard and flash sgybicwm.zip via cwm. You are done.
Any other boot.img flasher like faqbly wont work. I just tried it with hells fusion 50. it has a stock kernels boot.img inside stock folder of the kernels zip. Get that and sgybicwm.zip
Click to expand...
Click to collapse
PLEASE HELP ME. I TRIED TO INSTALL STOCK KENEL BY APPLYING ZIP IN CLOCKORKMOD.
THE SITE WAS GALAXY4GAMING.COM. IT TOLD ME TO WIPE DATA AND CACHE AND THEN INSTAAL ZIP. I DO THAT.IT SAYS INSTALLATION IS ABORTED. I GET BORED AND REBOOT MY PHONE. WHEN I REBOOT IT ,,IT ONLY SHOWS A BLOCK ELCOME SCREEN WIH GALAXY Y WRITTEN ON IT AND DOES NOT DO ANYHING.IT SHOWS IT FOR HOURS AND HOURS.PLESE HELP AND TELL ME WHAT TO DO.:crying::crying::crying:

YES He is right this is a good method of flashing the stock kernel instead of flashing the whole firmware again.
GT S5360
Rom - Jelly Blast v4.0.5
Kernel - Marroc v2.0 Final
Overclocked - 1.2 GHz
Undervolted - -100 mV
Battery - 3200 mAh
SD Card - 32 GB class 10
Swap - 256 MB
SD / EXT - 2 GB ext 3

apoorva.97 said:
PLEASE HELP ME. I TRIED TO INSTALL STOCK KENEL BY APPLYING ZIP IN CLOCKORKMOD.
THE SITE WAS GALAXY4GAMING.COM. IT TOLD ME TO WIPE DATA AND CACHE AND THEN INSTAAL ZIP. I DO THAT.IT SAYS INSTALLATION IS ABORTED. I GET BORED AND REBOOT MY PHONE. WHEN I REBOOT IT ,,IT ONLY SHOWS A BLOCK ELCOME SCREEN WIH GALAXY Y WRITTEN ON IT AND DOES NOT DO ANYHING.IT SHOWS IT FOR HOURS AND HOURS.PLESE HELP AND TELL ME WHAT TO DO.:crying::crying::crying:
Click to expand...
Click to collapse
Stop using all caps mate.
Keep kalm and use odin.
Can you go to recovery mode?
And download mode?
Try to give as much info as you can. So that people here can assist you better.

[Bruce Wayne] said:
Stop using all caps mate.
Keep kalm and use odin.
Can you go to recovery mode?
And download mode?
Try to give as much info as you can. So that people here can assist you better.
Click to expand...
Click to collapse
i dont know what is download mode. i cant go in recovery mode too. its my fisrtt mobile.only passed 3 months with it . o god i am crying:crying::crying::crying::crying::crying::crying:

Ok.
Here is what you need to do.
Download a stock rom from dock73's thread from dev section (its a sticky one, so no trouble in finding it).
Then download odin3 v1.85 from same thread.
Get samsung mobile device drivers.
Install drivers first.
Then extract all those zips (rom and odin ) in a separate folder.
Open odin.exe.
Then switch off your phone (pull battery if nothing works).
Press Volume down + Power + Home Buttons All at same time
You will be I'm download mode.
Press volume up and connect your phone to pc with data cable.
You will see a yellow signal on odin screen. Dont change anything and just add those files from the firmwares you extracted in the folder.
Csc.tar.md5 for csc
Modem.tar.md5 for phone
And
pda.tar.md5 for pda
Click on start and it will show a pass to you when completed.
Hope that complets all for you.
If you still dont get head over to docky thread.
And see 2nd post.

Galaxy S3 i9300 Unbrick [restore to stock rom] [noobs][easy]

Hi guys! This is a noob-proof guide on how to flash stock samsung firmware on your i9300. Whether you have bricked it or just want the stock firmware back. Here's how to do it (detailed explaination)
WARNING! : This is only for the GT i9300 (international version) , Check your device before proceeding. Also you might lose all your data. So backup! i am not responsible if you brick your phone(although very unlikely) by not following the guide properly
Also you will lose your custom recovery, Custom ROM and will not longer have root
Ok lets begin!
1. Make sure you have the samsung drivers installed on your pc (http://bit.ly/SDaIIE)
2. Your device should have at least 80% battery left
3. Enable USB Debugging by going to Settings>Developer Options>Tick the Usb debugging tick box!
Files needed :
1. Android 4.1.2 I9300XXEMC3 for Galaxy S3 I9300 - http://www.hotfile.com/dl/202240205/4dcf384/I9300XXEMC3_I9300NEEEMC1_NEE.zip.html
2. Odin 3.07 - http://bit.ly/16aRzF4
Extract The firmware Zip file until you get a file with a .tar extension and some other files. Do not extract furthur
Extract odin zip file till you get Odin3 v3.07.exe
Now here comes the actual flashing part
1. Power off your smartphone. Wait 5-6 seconds for vibration to confirm complete switch off.
2. Now, get into Download Mode by pressing and holding Volume Down, Home and Power button simultaneously until Samsung Galaxy logo appears in phone screen. Wait few seconds and your phone will be in download mode.
3.Open odin as administrator and connect your s3 to your computer with usb cable
4. You will get a message "Added" in the message box in odin and You should also see COM port with a number in Yellow if you successfully added your device.
if you don't get this , try another usb port.. if it still doesn't come , reinstall drivers.
5. Select these files from I9300XXEMC3 folder in Odin at respective buttons:
Click the PDA Button, and select the .tar.md5 file here with *code* appearing in its name
Click the Phone Button, and select file with *modem* in its name (leave if there is no such file)
Click the CSC Button, and select file with *csc* in its name (leave if there is no such file)
Click the PIT Button, and select the .pit file. Use only if you got it while extracting , otherwise ignore it.
6. make sure Auto Reboot and F. Reset Time checkboxes are selected. Also, make sure that Re-Partition checkbox is selected, only if you are using a .pit file
7. Double check everything above and hit start!
8. once flashing is complete the phone will reboot automatically and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can then unplug the USB cable to disconnect your device from computer.
After completing these steps, Make sure to wipe the cache and do a factory reset in clockworkmod recovery if you do happen to find yourself in a bootloop (phone rebooting continuously) Or just do it anyways to prevent a bootloop from occurring.
congrats! , you have just restored your i9300!
If this has helped you make sure to hit the thanks button!

should be in General

We already have this exact same topic posted .
jje

Deleted OS
Please Help me this is important i had Galaxy s3 cyanogen mod 10.1 and i wanted to get back to stoke firmware i get to CWM and i did this:
wiped cash
wiped divlyk
format system
format data
actually i format the phone to Zero i tried to flash stoke firmware with odin but it's not installing it get to NAND Write Start!!
and stop please help me !!!!

Great simple procedure.. it seems as I never tried... I entered Android world recently..
Just wanted to know few things..
I bought S3 with ICS. upgraded to 4.1.2 but I feels some lagging after upgrade.
So questions are :
1. Can I get back to ICS without voiding my warranty?
2. Can I use this method to install 4.1.2 which may have no lagging issues.?
Help much appreciated..!
Thank you in advance..!

Thread Moved to General.

Bad_boy46 said:
Please Help me this is important i had Galaxy s3 cyanogen mod 10.1 and i wanted to get back to stoke firmware i get to CWM and i did this:
wiped cash
wiped divlyk
format system
format data
actually i format the phone to Zero i tried to flash stoke firmware with odin but it's not installing it get to NAND Write Start!!
and stop please help me !!!!
Click to expand...
Click to collapse
Make sure you don't attach the USB cable into a hub.
Sent from Hell thanks to Android
---------- Post added at 01:41 PM ---------- Previous post was at 01:39 PM ----------
amit3880 said:
Great simple procedure.. it seems as I never tried... I entered Android world recently..
Just wanted to know few things..
I bought S3 with ICS. upgraded to 4.1.2 but I feels some lagging after upgrade.
So questions are :
1. Can I get back to ICS without voiding my warranty?
2. Can I use this method to install 4.1.2 which may have no lagging issues.?
Help much appreciated..!
Thank you in advance..!
Click to expand...
Click to collapse
Yes and no... You must reformat partitions and upload an ICS bootloader. Not for the regular user i'm afraid
Sent from Hell thanks to Android

amit3880 said:
Great simple procedure.. it seems as I never tried... I entered Android world recently..
Just wanted to know few things..
I bought S3 with ICS. upgraded to 4.1.2 but I feels some lagging after upgrade.
So questions are :
1. Can I get back to ICS without voiding my warranty?
2. Can I use this method to install 4.1.2 which may have no lagging issues.?
Help much appreciated..!
Thank you in advance..!
Click to expand...
Click to collapse
Yup you can use this method to restore to ICS...
Download ICS Firmware - Click here
Now flash this firmware...
Hit Thanks if i helped

Bad_boy46 said:
Please Help me this is important i had Galaxy s3 cyanogen mod 10.1 and i wanted to get back to stoke firmware i get to CWM and i did this:
wiped cash
wiped divlyk
format system
format data
actually i format the phone to Zero i tried to flash stoke firmware with odin but it's not installing it get to NAND Write Start!!
and stop please help me !!!!
Click to expand...
Click to collapse
This normally happens when the partitions on the embedded multi media card gets corrupted for whatever reason, also known as the emmc.
The phone can be revived by flashing a pit file to repartition the emmc in order so it can be written to.
Download and unzip this file and you will have a .pit file which you put in the tab marked PIT in Odin
GT-I9300_mx_20120220.pit = Galaxy S3 of 16 Gb
GT-I9300_mx_20120322.pit = Galaxy S3 of 32 Gb
GT-I9300_mx_20120329.pit = Galaxy S3 of 64 Gb
(Just google the one that you need and download it)
Next make sure > r partition, f /reset, and auto reboot are ticked in options in Odin.
Next put the stock rom in the tab marked PDA, if flashing a custom rom then flash a rooted kernel first in PDA together with the pit file, hit start and start the flashing process, afterwards this will also give you the option of flashing the rom from recovery, next, flash the custom rom from Odin or from recovery
When finished the phone should reboot and start up.
Hit the thanks button if i helped

TechMasta said:
This normally happens when the partitions on the embedded multi media card gets corrupted for whatever reason, also known as the emmc.
The phone can be revived by flashing a pit file to repartition the emmc in order so it can be written to.
Download and unzip this file and you will have a .pit file which you put in the tab marked PIT in Odin
GT-I9300_mx_20120220.pit = Galaxy S3 of 16 Gb
GT-I9300_mx_20120322.pit = Galaxy S3 of 32 Gb
GT-I9300_mx_20120329.pit = Galaxy S3 of 64 Gb
(Just google the one that you need and download it)
Next make sure > r partition, f /reset, and auto reboot are ticked in options in Odin.
Next put the stock rom in the tab marked PDA, if flashing a custom rom then flash a rooted kernel first in PDA together with the pit file, hit start and start the flashing process, afterwards this will also give you the option of flashing the rom from recovery, next, flash the custom rom from Odin or from recovery
When finished the phone should reboot and start up.
Hit the thanks button if i helped
Click to expand...
Click to collapse
Thanks my friend But it still have the same problem It's get to NAND Write Start!!! and on my s3 the blue line in download mod freeze i still can get to CWM i tried to install cyanogen mod rom Zip file but it's not booting please any Other ideas

Enabling USB debugging is completely useless and a waste of time

Bad_boy46 said:
Thanks my friend But it still have the same problem It's get to NAND Write Start!!! and on my s3 the blue line in download mod freeze i still can get to CWM i tried to install cyanogen mod rom Zip file but it's not booting please any Other ideas
Click to expand...
Click to collapse
Try Re-partitioning your phone.. Put the .pit file in the repartition section , Tick that re-partition checkbox in odin and hit start.. after re-partition try to flash the .tar file again :good:
Hit thanks if i helped

TechMasta said:
Yup you can use this method to restore to ICS...
Download ICS Firmware - Click here[/URL]
Now flash this firmware...
Hit Thanks if i helped
Click to expand...
Click to collapse
Thanks for replying!
Last question.. does flashing the stock ICS firmware voids my warranty??

Thx

If it is an official ROM package, it shouldn't trigger yellow triangle.
Even in that case, you can use Triangle Away app from Chainfire and see how it comes to zero
Sent from Hell thanks to Android

Glebun said:
Enabling USB debugging is completely useless and a waste of time
Click to expand...
Click to collapse
EXACTLY, Ho coulld you do that when you have a bricked phone.

it doesn't matter if you can do it - it's as useless as changing the wallpaper before flashing

TechMasta said:
Try Re-partitioning your phone.. Put the .pit file in the repartition section , Tick that re-partition checkbox in odin and hit start.. after re-partition try to flash the .tar file again :good:
Hit thanks if i helped
Click to expand...
Click to collapse
i did flash the GT-I9300_mx_20120220.pit file but same problem but when i flash it the CWM goes from the phone so i tried to flash the cf-root file but it stop at NAND write start!!! so i flashed the mx.pit file and after that i tried to flash the cf-root file and i managed to flash it and my custom binary Counter Increases but when i try for the firmware it get stuck in NAND write start!!! (im GONE crazy)

guys please i need help where are the developers ?!

I don't know much of what you two talked about because i am a noob too. You should make a topic about it man!

[Q] i9505x live demo unit

Hello please help me i followed these instructions on how to make i9505x work like normal phone but i got stucked and now i probably bricked my phone
1 - Download Odin, TWRP recovery, Stock I9505 Rom (?) and Adam's kernel ( you can find link for all on this thread )
2 - Boot the device on dowload mode (push volume down, home and power button until the device vibrate)
3 - Flash the TWRP recovery, and wait for Odin return Sucess message.
4 - Copy the Adam's kernel .zip and Stock Rom file in the device ( sdcard root or what you want )
5 - flash the kernel with "Install" recovery option
6 - after that Wipe and Format every thing you can! (system, cache, etc...)
7 - Flash the stock Rom ( may have some error for the modem.bin but no matter )
8 - This may work now!
Click to expand...
Click to collapse
i ended on step 7, when i install stock rom my odin just say false or fail .
Please help me

If you will flash normal firmware on I9505x, odin will stop at flashing modem... Demo units don't have modem hardware, so you need firmware without modem, or just download a pre rooted firmware.
1. Rename it by removing .md5 extension, so you'll have i9505XXXX.tar.
2. Open it with 7-zip, delete NON-HLOS.bin and modem.bin and flash it.

Hi thanks for reply but 7zip tells me that he ecant open tar files.

Please help me

Lancerlover said:
Hi thanks for reply but 7zip tells me that he ecant open tar files.
Click to expand...
Click to collapse
7-zip can open .TAR files -> Read HERE (The main features of 7-Zip)

Lancerlover said:
Hello please help me i followed these instructions on how to make i9505x work like normal phone but i got stucked and now i probably bricked my phone
i ended on step 7, when i install stock rom my odin just say false or fail .
Please help me
Click to expand...
Click to collapse
Dont forget u will not get any signal at all I9505X doesnt have RF section

i know that i cant call from that phone anytime .
Can i download somewhere the editet stock rom or can you please edit it for me ? i need czech version,
Thanks for reply

Please i need immediately help, i need to get phone back to live demo it doesnt work it is stuck after the procedure on samsung screen please i need to repair it really fast.

Sorry for spam but i need help PLEASE help me.

[Q]Can't install custom recovery on s4

Hi, i have a problem when i try to install the custom recovery of philz. (The latest one for s4 6.53.9)
I have a samsung s4 black edition. I did all the steps on the guide, but when i install the custom recovery i only get "reset" on odin and nothing happened on the phone. On download mode it say that i have a custom firmware but the knox warranty flag has not tripped.
If anyone have an answer please help.

TenshiSenpai said:
Hi, i have a problem when i try to install the custom recovery of philz. (The latest one for s4 6.53.9)
I have a samsung s4 black edition. I did all the steps on the guide, but when i install the custom recovery i only get "reset" on odin and nothing happened on the phone. On download mode it say that i have a custom firmware but the knox warranty flag has not tripped.
If anyone have an answer please help.
Click to expand...
Click to collapse
Can you please link the guide you have followed?
What black edition version do you have? I9500 or I9505, i understand there are 2 versions depending on region.
Is the bootloader unlocked?
What version Odin are you using?
Remember to reboot into recovery by holding volume up while turning power on after flashing.
Holding volume down gives you download mode.
Did you put the recovery package in the PDA tab?

I use odin 3.07 and used the guide of philz. I tryed with auto reboot and without auto reboot on odin, i put the tar.md5 file on pda without anything else. The only other option ticked was f.reset time.
Sent from my GT-I9505 using XDA Free mobile app

Bump

Noone knows anything? Please help, I can't do anything with the phone in this state. I can't install the official firmware nor the recovery too.

Uncheck auto-reboot in Odin.
if problem persists:
Different usb cable
Different usb port
Make sure Kies is not running in the background.

Already done all that stuff,
Any other suggestions?

TenshiSenpai said:
Already done all that stuff,
Any other suggestions?
Click to expand...
Click to collapse
Hi,
You are using Odin 3.07 try with Odin 3.09
Download tar file again or a different one , is a new one for the I9505
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/jflte/philz_touch_6.55.0-jflte.zip.md5/

MAX 404 said:
Hi,
You are using Odin 3.07 try with Odin 3.09
Download tar file again or a different one , is a new one for the I9505
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/jflte/philz_touch_6.55.0-jflte.zip.md5/
Click to expand...
Click to collapse
In odin 3.07 I was putting the tar.md5 in PDA, where should I put it now? Because your file is in .zip.md5 and I can't put it in any slot.

TenshiSenpai said:
In odin 3.07 I was putting the tar.md5 in PDA, where should I put it now? Because your file is in .zip.md5 and I can't put it in any slot.
Click to expand...
Click to collapse
Hi,
Sorry that was the zip version , this is the tar version
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/jflte/philz_touch_6.53.9-jflte.tar.md5/
for I9505 international
Better use odin 3.09

MAX 404 said:
Hi,
Sorry that was the zip version , this is the tar version
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/jflte/philz_touch_6.53.9-jflte.tar.md5/
for I9505 international
Better use odin 3.09
Click to expand...
Click to collapse
I put it in Ap slot and then started but when it finish shows only reset and after few minutes without touching anything it change on Passed!
Then I unplugged the pone and tried home+vol up + power but it doesn't go in the recovery sistem menu

TenshiSenpai said:
I put it in Ap slot and then started but when it finish shows only reset and after few minutes without touching anything it change on Passed!
Then I unplugged the pone and tried home+vol up + power but it doesn't go in the recovery sistem menu
Click to expand...
Click to collapse
Remember to release the 3 button combination after the samsung logo shows up

MAX 404 said:
Remember to release the 3 button combination after the samsung logo shows up
Click to expand...
Click to collapse
thank you so much i tried to remove the outo reboot on odin and it worked, really thanks! just another information: with this recovery can i backup all my phone or i need to install another version?

TenshiSenpai said:
thank you so much i tried to remove the outo reboot on odin and it worked, really thanks! just another information: with this recovery can i backup all my phone or i need to install another version?
Click to expand...
Click to collapse
Glad is working
Yes you can make a nandroid , go to backup and restore choose your backup destination ( recommend external SD)

Half bricked galaxy s5! G900h

So the situation is that my phone is not booting up not in recovery mode and not in normal mode BUT it is however BOOTING INTO DOWNLOAD MODE .
now i thought maybe i will just reinstall the stock file and get back to business but it is still not booting up after flashing stock file properly as well in odin it goes as pass 100% but it does not boot back .
SINCE RECOVERY mode is not working i could not flash a custom rom
all this happened when i installed a boot logo changer zip from here https://forum.xda-developers.com/showpost.php?p=65599504&postcount=22 , after that it hasnt been working !
please help @yash92duster or anyone else with such knowledge!

yogesh.kalyana said:
So the situation is that my phone is not booting up not in recovery mode and not in normal mode BUT it is however BOOTING INTO DOWNLOAD MODE .
now i thought maybe i will just reinstall the stock file and get back to business but it is still not booting up after flashing stock file properly as well in odin it goes as pass 100% but it does not boot back .
SINCE RECOVERY mode is not working i could not flash a custom rom
all this happened when i installed a boot logo changer zip from here https://forum.xda-developers.com/showpost.php?p=65599504&postcount=22 , after that it hasnt been working !
please help @yash92duster or anyone else with such knowledge!
Click to expand...
Click to collapse
That link you attached is good
its the one many G900H users using
no one else faced the issue of bricking the device
maybe you must have dirty flashed several roms so it must have bricked
Try repartition with PIT
no other way i think

Keeps failing
yash92duster said:
That link you attached is good
its the one many G900H users using
no one else faced the issue of bricking the device
maybe you must have dirty flashed several roms so it must have bricked
Try repartition with PIT
no other way i think
Click to expand...
Click to collapse
repartition just keeps failing. Gonna try again will try and find a way.

yogesh.kalyana said:
Departing just keeps failing. Gonna try again will try and find a way.
Click to expand...
Click to collapse
use KITKAT Repair Firmware and try along with PIT
it should work

Thanks bro
yash92duster said:
use KITKAT Repair Firmware and try along with PIT
it should work
Click to expand...
Click to collapse
I think my pit file is corrupted do I have the correct one or maybe a link to it. I am gonna try with initial firmware of KitKat S5 came up with.

yogesh.kalyana said:
I think my pit file is corrupted do I have the correct one or maybe a link to it. I am gonna try with initial firmware of KitKat S5 came up with.
Click to expand...
Click to collapse
after flashing stock can u boot into stock recovery, if yes wipe caches and reset to factory

nope
vincom said:
after flashing stock can u boot into stock recovery, if yes wipe caches and reset to factory
Click to expand...
Click to collapse
no recoveries at all.
only download mode

nah bro!
yash92duster said:
use KITKAT Repair Firmware and try along with PIT
it should work
Click to expand...
Click to collapse
it did not work !
it is still not booting up but i can boot it into download mode

yogesh.kalyana said:
no recoveries at all.
only download mode
Click to expand...
Click to collapse
if odin flashed fw ok then upon reboot did you see samsung logo, how many screens came up after reboot from odin, 1 or 2. reboot pc and try odin again or another fw, LL or MM
what happens when trying recovery mode.
keep trying to get into recovery, remove battery for 10secs first b4 trying to get into recovery and w/out cable plugged in

yogesh.kalyana said:
it did not work !
it is still not booting up but i can boot it into download mode
Click to expand...
Click to collapse
What rom were you using before crash
What did you do at last
Post all details

yash92duster said:
What rom were you using before crash
What did you do at last
Post all details
Click to expand...
Click to collapse
your nemesis rom

yogesh.kalyana said:
your nemesis rom
Click to expand...
Click to collapse
Answer both questions

vincom said:
if odin flashed fw ok then upon reboot did you see samsung logo, how many screens came up after reboot from odin, 1 or 2. reboot pc and try odin again or another fw, LL or MM
what happens when trying recovery mode.
keep trying to get into recovery, remove battery for 10secs first b4 trying to get into recovery and w/out cable plugged in
Click to expand...
Click to collapse
after odin gives a successful flash phone does not boots up at all. no screens come up and i cannot enter recovery mode
and it does not work with any firmwares in odin mode system status says custom where current binary says official

yash92duster said:
Answer both questions
Click to expand...
Click to collapse
I was on nemesis rom and i flashed that logo changer zip as i mentioned in OP and after it hasnt booted up

if fw flashed w/out errors and odin is set to auto reboot and it doesnt, u could be sol.
try diff fw, reboot pc and/or try diff pc, cables.
theres also ways to repartition but idk about those methods

yogesh.kalyana said:
I was on nemesis rom and i flashed that logo changer zip as i mentioned in OP and after it hasnt booted up
Click to expand...
Click to collapse
do this
use laptop ( shutdown once and turn it back on and use )
use different usb 2.0 cable
use new odin application
Use New MM based Firmware
if it doesnt boot
then flash PIT alone in odin
then if stock recovery comes clear data and cache
and then install twrp and flash new roms
if not work i dont have any other solutions
:good::good:
good luck

tried but no show!
yash92duster said:
do this
use laptop ( shutdown once and turn it back on and use )
use different usb 2.0 cable
use new odin application
Use New MM based Firmware
if it doesnt boot
then flash PIT alone in odin
then if stock recovery comes clear data and cache
and then install twrp and flash new roms
if not work i dont have any other solutions
:good::good:
good luck
Click to expand...
Click to collapse
i tried it but it did not work
looks like the guy is dead !
any idea on how much it could cost me ?

if it has any sign of life its ususally recoverable .
links to fw u have tried, were they for the g900h?
which odin ver did u try
pull battery for long time, say 10mins b4 going into dl mode.
just flash bl and modem, search xda for howto.
did u try kies?
u can try usb jig or jtag as last resort

vincom said:
if it has any sign of life its ususally recoverable .
links to fw u have tried, were they for the g900h?
which odin ver did u try
pull battery for long time, say 10mins b4 going into dl mode.
just flash bl and modem, search xda for howto.
did u try kies?
u can try usb jig or jtag as last resort
Click to expand...
Click to collapse
all firmwares i have tried are from sammobile and odin version i tried are odin 3.11.1
i tried leaving it for an hour as well.
i have tried bl and modem too along pit file
i have not tried kies
i am going to try usb jig or jtag as last rersort

yogesh.kalyana said:
all firmwares i have tried are from sammobile and odin version i tried are odin 3.11.1
i tried leaving it for an hour as well.
i have tried bl and modem too along pit file
i have not tried kies
i am going to try usb jig or jtag as last rersort
Click to expand...
Click to collapse
give kies a shot and/or try both odin 3.09 and 3.10