Hello!
I'm new Android User coming from iOS. I rooted my SM-J510FN and by mistake I unchecked the OEM lock so I can't run Android now.
It shows me Custom binary blocked by FAP. Secure Fail: Kernel.
I've looked for some solutions on YTube and Google, and all say I have to reinstall the ROM Stock. I tried to do this, but when I'm going to Start on Odin it gives me the next error. FAIL. In the device SW REV CHECK FAIL [aboot] Fused 2 > binary 1 and I'm not able to fix it.
Anyone could help me, please?
Thanks in advance!
Khronzz said:
Hello!
I'm new Android User coming from iOS. I rooted my SM-J510FN and by mistake I unchecked the OEM lock so I can't run Android now.
It shows me Custom binary blocked by FAP. Secure Fail: Kernel.
I've looked for some solutions on YTube and Google, and all say I have to reinstall the ROM Stock. I tried to do this, but when I'm going to Start on Odin it gives me the next error. FAIL. In the device SW REV CHECK FAIL [aboot] Fused 2 > binary 1 and I'm not able to fix it.
Anyone could help me, please?
Thanks in advance!
Click to expand...
Click to collapse
If you can boot it in download mode (volume down, home and power for a few seconds while smartphone off), i recomend you to install smart swich on your pc and use its recovery tools.
Related
Hello everyone!
I need a little advice to fix my softbricked note 4
So here are the facts:
I boght a bricked N910F i tryed different roms from sammobile using odin and twre, more than 7 to be specific, and most of them did t work as it shoul. My imei was the same as on the case but i noticed SN was different in system and knox 0x1.... I got a version of android 6.0.1 to work but there were different little, big problems like not rememering wi fi passwords, fingerprint not working version :null in testing, and often restarts and bootloops after installing different aplications. i tryed many things even repartition with proper pit file, i still had back-up of my efs but considering the serial number was screwed up i gave up trying anything else. I tryed rooting with different methods but everything failed.
I boght another N910F with screen broken but working mainboard and knox 0x0
Swaped the mainboard, tryed samsung kies 1, entered serial and model and it gave me the fw i needed to flash. Tryed flashing with kies and at the middle of transfer it said failed and phone froze, didnt even power on for a while. Tryed again after a few howrs, same rezult with message emmc read fail, and at the bottom emmc write fail.
kies said i need PDAG2/CSCE2 / PHONEE3 CNX
Now, later in the evening i managed to power it on agan and i dont know what to try so i dont screw up with knox
Here are some pictures of my current status:
Current status: cant post picture...
ODIN MODE (HIGH SPEED)
PRODUCT NAME SM-N910F
CURRENT BINARY Samsung Official
System Status Official
REACTIVATION LOCK OFF
Knox 0x0
qualcomm secureboot enable csb
RP SWREV S1 T1 R1 A1 P1
secure download enable
UDC STAR
"Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again"
What should i try next?
Thanks
Later Edit:
looked up on youtube and found that smart switch can do the work, tryed it and seems it went all the way and installed proper rom without fail. LOL
Morning edit:
So everything worked perfect last night so i left it on fastcharger. In the morning i found it in download mode with dii emmc read fail, could not do normal boot.... After this i have to let it rest a bit without battery, then it boots up ok, works a few minutes then it shuts down and never wake up
faurionutz said:
eMMC from phone is damaged harware
Click to expand...
Click to collapse
I found the only way to keep it working is by preventing it to go into sleep mode. Play music on repeat muted keeps it working
Lucky i have fast chargers and 3 battery
i tried different keep alive apps but they eventually fail and phone dies
A while back my friend gave me his tablet to try and fix. He was screwing around in odin and did a nand erase. From my research it seemed I needed a pitfile to fix it. This weekend I was clearing out some junk and found the tablet so decided to give it another try. I was actually able to finally find the pit file, so I downloaded odin, the pitfile, and the newest lollipop. In odin, I loaded the pit and selected repartition. Odin goes through the process, reboots the tablet to the little android guy it loads then reboots again and it hangs on the Samsung Galaxy Tab 4 screen and won't go any further. I can access recovery and download mode still and according to the recovery logs the OS installed and is there, it's like this thing isn't setting the boot partition correctly or something. Anyone have any experience with this, or able to tell me if I'm doing something wrong.
Sm-t337v band gone
Hi I too click the nand in odin and now I can't get it pass the Samsung galaxy tab icon.
I have gotten a put file and did that it passed tried to do a stock firmware it won't go passed the incon
I am attaching pics of what it says please help
It wont let me attach them here is what it says
Odin mode
Product name SM-T337V
Current binary Samsung official
System status official
Reactivation lock off
Qualcomm secure boot enable (csb)
Rp serve s1 t1 r1 a3 p1
Secure download enable
Udc start that's the safe mode I think
But I also can get in to recovery mode as well it also says mutil csc?any thoughts
tammster37601 said:
Sm-t337v band gone
Hi I too click the nand in odin and now I can't get it pass the Samsung galaxy tab icon.
I have gotten a put file and did that it passed tried to do a stock firmware it won't go passed the incon
I am attaching pics of what it says please help
It wont let me attach them here is what it says
Odin mode
Product name SM-T337V
Current binary Samsung official
System status official
Reactivation lock off
Qualcomm secure boot enable (csb)
Rp serve s1 t1 r1 a3 p1
Secure download enable
Udc start that's the safe mode I think
But I also can get in to recovery mode as well it also says mutil csc?any thoughts
Click to expand...
Click to collapse
get rid of it and get a t377p you be alot happier
Hello Everyone. I have Samsung On7 (SM-G600FY) but after rebooting it a message appear " Custom Binary Blocked by FRP Secure Fail: Kernel" then i tried flashing the stock rom but stucked on system.img.ext4 then failed. when i opened my phone a message appear "An error occurred while updating the device software. Use the emergency recovery function in the smart switch pc software. I tried kies and smart witch but both failed. Can anyone help me with my problem? Thanks in advance
RafaelAdan05 said:
Hello Everyone. I have Samsung On7 (SM-G600FY) but after rebooting it a message appear " Custom Binary Blocked by FRP Secure Fail: Kernel" then i tried flashing the stock rom but stucked on system.img.ext4 then failed. when i opened my phone a message appear "An error occurred while updating the device software. Use the emergency recovery function in the smart switch pc software. I tried kies and smart witch but both failed. Can anyone help me with my problem? Thanks in advance
Click to expand...
Click to collapse
What did you do before the phone gave you the first error " Custom Binary Blocked by FRP Secure Fail:Kernel"?
Augustoandro said:
What did you do before the phone gave you the first error " Custom Binary Blocked by FRP Secure Fail:Kernel"?
Click to expand...
Click to collapse
I just plugged it in my laptop and used the app called mirrorgo then after my phone reboot it already shows the message
RafaelAdan05 said:
I just plugged it in my laptop and used the app called mirrorgo then after my phone reboot it already shows the message
Click to expand...
Click to collapse
Is your phone booting in normal mode after showing the message?
It's working now i just bought a new usb cable then flash complete but thanks for your advices and efforts
Use Stock Rom Flash it via Odin
Code:
FRP IS TRIGGERED WHENEVER OEM IS UNLOCKED IN DEVELOPER OPTIONS
Now you need to use stock ropm and flash it via using only
If you mess up and point fingers at me I will laugh at you:laugh:
If so you hard brick your Samsung then u must try Samsung z3x pro tool hanging out bye need anything just reply me .
RafaelAdan05 said:
Hello Everyone. I have Samsung On7 (SM-G600FY) but after rebooting it a message appear " Custom Binary Blocked by FRP Secure Fail: Kernel" then i tried flashing the stock rom but stucked on system.img.ext4 then failed. when i opened my phone a message appear "An error occurred while updating the device software. Use the emergency recovery function in the smart switch pc software. I tried kies and smart witch but both failed. Can anyone help me with my problem? Thanks in advance
Click to expand...
Click to collapse
Hello everyone !
I have a serious problem on my cell phone and I am desperate to solve it, I am even willing to reward for help (I mean it).
I have a Galaxy S8 (SM-G950U1 SnapDragon), I bought it at BestBuy Mobile and unfortunately do not know which carrier it is.
I was trying to do Root in it, but it was giving failure, it appeared the following message:
Error SW CHECK CHECK FAIL: [aboot] Fused 5> Binary 1
From what I understand I'm trying to flash an AP / PDA / Firmware in a different version, but how can I find out which version to download the correct firmware?
Thank you !!!
Hello everyone !
I have a serious problem on my cell phone and I am desperate to solve it, I am even willing to reward for help (I mean it).
I have a Galaxy S8 (SM-G950U1 SnapDragon), I bought it at BestBuy Mobile and unfortunately do not know which carrier it is.
I was trying to do Root in it, but it was giving failure, it appeared the following message:
Error SW CHECK CHECK FAIL: [aboot] Fused 5> Binary 1
From what I understand I'm trying to flash an AP / PDA / Firmware in a different version, but how can I find out which version to download the correct firmware?
Thank you !!!