Database Users

[Q] I get error while flashing!

i have E400f . i downloaded orginal kernel file! and tried with KDZ uploader but it gives error message
Upgrade Error
w param :100
L param : 6 ??? what to do?

N910P HS-USB QDLoader 9008 question

Hello community,
Does anyone was able to flash prog_emmc_firehose_8936.mbn through QFIL to n910p?
I've tried several times since yesterday to unbrick the phone itself, but keep receiving next message:
PHP:
Start Download
Program Path:C:\Users\JHome\Desktop\samsung\8675_W00\prog_emmc_firehose_8936.mbn
COM Port number:3
Sahara Connecting ...
Sahara Version:2
Start Sending Programmer
Download Fail:System.Exception: Unable to download Flash Programmer using Sahara Protocol
at QC.QMSLPhone.Phone.QPHONEMS_SaharaArmPrgDownload(String sFileName)
at QC.SwDownloadDLL.SwDownload.QPHONEMSSaharaDownloadArmPrg(UInt64& version, String armPrgPath)
Download Fail:Sahara FailSahara Fail
Finish Download
Seems the problem is in prog_emmc_firehose_8936.mbn
Please someone share necessary .mbn file id any.
Thanx,

me too
help me
Tks all

Qualcomm HS-USB QDloader 9008 HARD BRICK , how to fix?

Hi, i have G530FZ model, i tried this guide: www[dot]droidsavvy[dot]com/unbrick-qualcomm-mobiles/
using QFIL tool but i get this error:
Download Fail:System.Exception: Unable to download Flash Programmer using Sahara Protocol
at QC.QMSLPhone.Phone.QPHONEMS_SaharaArmPrgDownload(String sFileName)
at QC.SwDownloadDLL.SwDownload.QPHONEMSSaharaDownloadArmPrg(UInt64& version, String armPrgPath)
Download Fail:Sahara FailSahara Fail
how can i fix it?
is there another method without jtag , ATF Box etc..?
Thanks

Bricked Coolpad Cool1

Hi guys years ago i switch the rom from my coolpad to cuoco92 and it showed many bugs with apps, i tried to update the rom to a newer version but i didn't know that you must update twrp for that to. So i literally bricked my phone... and now there's no much help in internet like was back them.
I tried to unbrick with flash tool but it need scatter rom (i don't know where i can get those roms),
On coolpad pst but it shows an error "check thread the version of cpb don't support been downloaded.
I tried with qgdp and ygdp but i only got the same error over and over saying the following messages...
13:49:32 CELL2: V3.2.6.0
13:49:32 CELL2: Cell 2 USB address is: 6&5FCEF7&0&1
13:49:34 CELL2: Download Started...
13:49:34 CELL2: Downloading CPB:
13:49:34 CELL2: Init DownQueue...
13:49:34 CELL2: Device connected, start to download ...
13:49:34 CELL2: Get bootloader information ...
13:49:34 CELL2: Bootloader will not use CRC while system img!
13:49:34 CELL2: Bootloader does not support querying CID !
13:49:34 CELL2: Bootloader does not support querying Secure !
13:49:34 CELL2: Check device ...
13:49:34 CELL2: Check phone name fail, The phone name 'C106' not contained in 'C1'
13:49:34 CELL2: Check phone name fail, Please check the 'ProductName' in the PhoneInfo.yl
13:49:34 CELL2: Check phone name fail !, msg:C106_P4
13:49:34 CELL2: Download failed,please try again!!
13:49:34 CELL2: Total download time elapsed: 0 min : 0 sec
13:49:34 CELL2: Downloading all files: Failed!
I tried to rename the command line with the name of phone but it doens't work too... Now i don't know what else i can do...
Help me please! =´[

I think it'll better to try flash using QPST/QFIL tool or Miflash tool . Reboot phone to EDL mode , hold down all three buttons until led blinks.

Trying to root my ZTE ZMax Pro (Z981) from MetroPCS, keep getting stuck on Sahara error in the QFIL

Hi all,
I've been trying to root my ZTE phone for a couple of days now (using this guide: https://androidforums.com/threads/new-root-method-for-z981-zmax-pro.1284305/) but when I try to flash (?) using the QFIL, I keep getting this error:
ERROR: function: sahara_rx_data:277 Unable to read packet header. Only read 0 bytes.
ERROR: function: sahara_main:983 Sahara protocol error
ERROR: function: main:320 Uploading Image using Sahara protocol failed
Download Fail: Sahara Fail:QSaharaServer Fail: Process fail
I've tried getting the most recent version of QFIL I could find, I've tried allowing unsigned drivers, I've tried finding a new programmer file, updating the Qualcomm drivers but I keep getting the same error.
I'm using QFIL 2.0.2.3 and the ZTE is running Android 6.0.1
If anyone could help me out that'd be greatly appreciated, and if there's a piece of info that I need to provide just reply and I'll edit it in.
Thanks in advance!