ZTE S7 Blade --- working TWRP Recovery! - Blade General

Hello,
thanks to Sattarvoybek from 4pda we've got a working TWRP for the S7!!!
Install it by dd if=/sdcard/recovery.img of=/dev/block/bootdevice/by-name/recovery
or Flashify ...
(only if u've got root! )
https://4pda.ru/forum/index.php?showtopic=697227&st=340
Download: https://drive.google.com/open?id=0B4Ya5mT9NhjqUUZyVTFDT18xQlU

can you please elaborate on how to install it? and did you test this?

Scepterus said:
can you please elaborate on how to install it? and did you test this?
Click to expand...
Click to collapse
Yes ... it's confirmed to work! ... installed it on my S7 ...
1st: root your phone ... best way from my point of view ... kingo 4.8 (oldie but goldie ... working!) + 'kingo to supersu 1.3' (Alternative: Replace_Kinguser_with_SuperSU-v2.0) - you will need adb-access for this ...
2nd: Install it by dd if=/sdcard/recovery.img of=/dev/block/bootdevice/by-name/recovery (adb again, su mode)
(See attachments)
Regards

i rooted with kingroot, so what? i connect it to the pc, and just type these commands in a cmd? do i need special drivers or something?

Scepterus said:
i rooted with kingroot, so what? i connect it to the pc, and just type these commands in a cmd? do i need special drivers or something?
Click to expand...
Click to collapse
1. activate dev.options by tapping 'build no' (about this phone) 7x ...
2. inside dev.options activate usb debugging/adb
3. install: https://forum.xda-developers.com/showthread.php?t=2588979
4. connect your phone and open a cmd prompt/terminal
5. adb shell ... then u enter ur phone and can do funny things in there
More detailed tutorials are around ... but ... are u sure, that u need a recovery?! - what's ur plan?

hey, it would not hurt to have a recovery that isn't the basic one.
as for what i need it for, the basics, flashing apps that won't install and stuff like that. also backing up the phone if i need.

Scepterus said:
hey, it would not hurt to have a recovery that isn't the basic one.
as for what i need it for, the basics, flashing apps that won't install and stuff like that. also backing up the phone if i need.
Click to expand...
Click to collapse
Read more at: https://www.viraltecho.com/replace-kingoroot-with-supersu/
The short process is:
root - change to supersu (the howto is inside the zip) - download the recovery and save the file to ur sd - execute the dd copy without!!! typos ... (check it twice)
Try 'Replace_Kinguser_with_SuperSU-v2.0.zip' first ... there's some memory that this on was easier ...
adb reboot recovery (inside a cmd/terminal - phone connected)
should show the magic ...

deadmind said:
Read more at: https://www.viraltecho.com/replace-kingoroot-with-supersu/
The short process is:
root - change to supersu (the howto is inside the zip) - download the recovery and save the file to ur sd - execute the dd copy without!!! typos ... (check it twice)
Try 'Replace_Kinguser_with_SuperSU-v2.0.zip' first ... there's some memory that this on was easier ...
adb reboot recovery (inside a cmd/terminal - phone connected)
should show the magic ...
Click to expand...
Click to collapse
why would i switch from kingroot? it's better than SuperSu.

Scepterus said:
why would i switch from kingroot? it's better than SuperSu.
Click to expand...
Click to collapse
It has many restrictions, installs a lot of crap to ur phone and many root-dependant programs will ask for supersu to work ... beside that I'm not sure, that u will be able to flash the recovery with this 'limited' root (maybe someone has some experience?!)
Beside that u could circumvent the dd -thing and check if kingo is 'enough'/capable by using Flashify + the recovery.img.
Never tested it ... but it's supposed to work (no warranty!)

it's not kingo root. it's kingroot. from the guys who created purify. i saw no restrictions, and i'll try to flash the recovery and let you know.

Scepterus said:
it's not kingo root. it's kingroot. from the guys who created purify. i saw no restrictions, and i'll try to flash the recovery and let you know.
Click to expand...
Click to collapse
Let's say that 'there's one ring to rule them all' ... and it's called 'chainfire supersu' ... which became kind of a standard and many apps especially ask for it (foldermount f.e.).
Kingroot has kind of some funny effects (google it) - that's one of the reasons most people like to change it to supersu - on the other hand kingroot does a great job for rooting phones ... that's the reason many people get into using it ...
Anyway ... please let me know, if flashify manages the installation of the recovery!

deadmind said:
Let's say that 'there's one ring to rule them all' ... and it's called 'chainfire supersu' ... which became kind of a standard and many apps especially ask for it (foldermount f.e.).
Kingroot has kind of some funny effects (google it) - that's one of the reasons most people like to change it to supersu - on the other hand kingroot does a great job for rooting phones ... that's the reason many people get into using it ...
Anyway ... please let me know, if flashify manages the installation of the recovery!
Click to expand...
Click to collapse
flashed with flashify, works like a charm.

Scepterus said:
flashed with flashify, works like a charm.
Click to expand...
Click to collapse
just started my phone from a shutdown, and i'm stuck in a bootloop of android is starting optimizing app.

Scepterus said:
just started my phone from a shutdown, and i'm stuck in a bootloop of android is starting optimizing app.
Click to expand...
Click to collapse
Try to wipe the cache & dalvik cache from the recovery (enter by vol up + power when the phone is shut down), then reboot and wait the optimization to complete.

tried that, even tried a complete wipe. when i do a complete wipe i reach the initial setup, but my default keyboard keeps crashing so i can't get past it.
i contacted ZTE to get the full rom so i may be able to flash it and fix my keyboard.
also when i reboot after i reach that screen, it goes into the optimization loop again...

I can give u a link to the full rom ...
But first try to
- wipe data
- wipe cache
- wipe dalvik
reboot and wait for like 10 min.
By the way .. i've got a recovery-backup in here ... entering adb (recovery) and executing dd if= should do the trick ... and permit u to installl the original recovery and the zte update.zip ...

tried those, like i said the only thing i got was the setup wizard but my keyboard crashes. where did you get the rom? i only found the update zip on their site.
it's a shame there's no custom rom for this device...

Inside the update.zip there's a full rom! ... as long u r on a stock recovery the procedure is:
copy the (maybe 1x extracted?!?) update.zip on ur sdcard ... enter the stock recovery ... wipe all ... install update ... 10 min later ur S7 should be back to stock ...
The stock recovery:
https://drive.google.com/open?id=0B4Ya5mT9NhjqNUkwbmY5cHNOb2M
Download, copy it (recovery) to your sdcard ... and then
Install it by dd if=/sdcard/recovery.img of=/dev/block/bootdevice/by-name/recovery
(if= INPUT FILE --- the file u wanna flash --- of= OUTPUT FILE --- the 'destination' ... keep this path as it is!!!)
After that ur normal recovery should be alive ... and u can install any update.zip which was made for the S7.
https://forum.xda-developers.com/zte-blade/general/help-zte-blade-s7-t920-firmware-t3414420
This should bring ur S7 back to life ...

how can i send the commands if the phone won't boot into settings? do i need to put it into download mode? or what?

Scepterus said:
how can i send the commands if the phone won't boot into settings? do i need to put it into download mode? or what?
Click to expand...
Click to collapse
The twrp -recovery supports mtp (file transfer) + adb commands ... - so just enter the recovery and start the procedure ...
(Windows - cmd / osx - terminal --- adb and drivers need to be installed ... )
https://forum.xda-developers.com/showthread.php?t=2588979

Related

[Q] Braincapped

Hey guys i have this old HTC Tattoo i would like to use for a while i need to test things on.
HTC Tattoo (Orange)
S-on
1.6.61.43 custom firmware
rooted
But i have a problem, i need to get a custom ROM on it.
so far:
1. Would not accept sim unlock code
1. Rooted it once
2. used RUU_Click_Orange_UK_1.67.61.43_release_signed_NoDriver becouse it was needed to accept the simunlock code
3. Lost root, rooted it again with Universal root becouse old method didn't work anymore.
4. Everytime i tried to open recovery menu, it shows a picture with a orange triangle and the phone next to it
5. Installed ROM manager and put Clockwork, nothing.
6. Tried to back up, install rom from ROM Manager, still nothing =(
HELP D:!
Question: How do i fix it so i don't get this trinagle thing and i can go into the recovery menu
EDIT: I forgot to add, i THINK i made the SDCard a Goldcard, but i'm not sure... how do i cheak?
still no reply? kay:
I am going to help you
I am going to help you when I come home from school I know what you have to do and how.
Shaumaaa said:
I am going to help you when I come home from school I know what you have to do and how.
Click to expand...
Click to collapse
=0 i'm back from school
Shaumaaa said:
I am going to help you when I come home from school I know what you have to do and how.
Click to expand...
Click to collapse
Are you back D: ? i still need help
answer
1. That triangle is stock recovery which isn't useful for installing custom roms.
2. You need custom recovery.
3. You need adb.
4 You can install recovery like this one click http://forum.xda-developers.com/showthread.php?t=950759 or manualy using cmd(adb needed).
If installing manualy: You need flash_image and recovery.img .
For cmd, commands are:
adb push recovery.img /sdcard/recovery.img
adb shell
su
flash_image recovery /sdcard/recovery.img
exit
exit
Hope this was helpful for you
Sorry if you waited too much, I didn't have time to answer you.
Shaumaaa said:
1. That triangle is stock recovery which isn't useful for installing custom roms.
2. You need custom recovery.
3. You need adb.
4 You can install recovery like this one click http://forum.xda-developers.com/showthread.php?t=950759 or manualy using cmd(adb needed).
If installing manualy: You need flash_image and recovery.img .
For cmd, commands are:
adb push recovery.img /sdcard/recovery.img
adb shell
su
flash_image recovery /sdcard/recovery.img
exit
exit
Hope this was helpful for you
Sorry if you waited too much, I didn't have time to answer you.
Click to expand...
Click to collapse
I followed the instructions it didn't help, still same problem
no errors with the .exe, but no dice either
flashpermission denied with manual cmd
not enough memory on the device
in rom manager it says i have clockworkmod 5.0.2.0, might be the the problem that my phone is on orange or that it is S-on ? becouse i'm pretty sure it has custom recovery and it is rooted
i was able to root with this method before i used "RUU_Click_Orange_UK_1.67.61.43_release_signed_NoDriver" update
Now i am not able to use that root method, maybe it would have worked before i used it...
How do i downgrade or whatever from this RUU ?
Adb
Do you have adb drivers installed?
Shaumaaa said:
Do you have adb drivers installed?
Click to expand...
Click to collapse
Yes
Don't know then, I had site with better commands which helped me but it's dead now so I can't access them..

[TF300TG] For all who had received a brick after updating on the last firmware

For all, who have a brick.
To solve the problem, you should do next:
1. Download the original file of firmware.
2. Get out from the archives the BLOB file.
3. Put it in the directory with adb and fastboot.
Next, there are few solutions to the problem.
The first way:
1. Boot into recovery or bootloader (if you can)
2. If you can't boot into bootloader, boot in it with command
Code:
adb reboot bootloader
3. Now you should install firmware. When you are in BOOTLOADER you can do this command
Code:
fastboot -i 0x0b05 flash staging blob
Now, even after command line say @ok, DON'T reboot your tablet. You must wait until you see progressbar on the screen and in will be 100%.
4. Next you shoul flash recovery. DOWNLOAD Flash it with command
Code:
fastboot -i 0x0b05 flash recovery twrp.blob
after that you will see msgs like "sending..." and "writing.." wait about 10 minutes after last msg. And reboot your tablet in bootloader with VOLUME DOWN + POWER
5. See in recovery if partitions are mounted and have or not zero sized internal memory.
Thats all. GL. Maby write smth else in this thread.
do you mean 100% written within the progress bar ?, cuz all i have is a filled progressbar with nothing within it , i've been waiting for about 10 mins , how long does it usually take ?
ningen90 said:
do you mean 100% written within the progress bar ?, cuz all i have is a filled progressbar with nothing within it , i've been waiting for about 10 mins , how long does it usually take ?
Click to expand...
Click to collapse
if you have fully filled progressbag - that's i mean 100%
it's good and ok
do next steps.
aLkRicha said:
For all, who have a brick.
To solve the problem, you should do next:
1. Download the original file of firmware.
2. Get out from the archives the BLOB file.
3. Put it in the directory with adb and fastboot.
Next, there are few solutions to the problem.
The first way:
1. Boot into recovery or bootloader (if you can)
2. If you can't boot into bootloader, boot in it with command
Code:
adb reboot bootloader
3. Now you should install firmware. When you are in BOOTLOADER you can do this command
Code:
fastboot -i 0x0b05 flash staging blob
Now, even after command line say @ok, DON'T reboot your tablet. You must wait until you see progressbar on the screen and in will be 100%.
4. Next you shoul flash recovery. DOWNLOADFlash it with command
Code:
fastboot -i 0x0b05 flash recovery twrp.blob
after that you will see msgs like "sending..." and "writing.." wait about 10 minutes after last msg. And reboot your tablet in bootloader with VOLUME DOWN + POWER
5. See in recovery if partitions are mounted and have or not zero sized internal memory.
Thats all. GL. Maby write smth else in this thread.
Click to expand...
Click to collapse
This should really be in the general section. Still a good find though.
Sent from my SGH-T999 using Tapatalk 2
aLkRicha said:
if you have fully filled progressbag - that's i mean 100%
it's good and ok
do next steps.
Click to expand...
Click to collapse
On my bootloader there is no USB icon there are only 3 icons,,,,it is jb 4.2.1 boot loader,,,,i am running energy 4.2.1 themed rom....what to do now??
jaffer707 said:
On my bootloader there is no USB icon there are only 3 icons,,,,it is jb 4.2.1 boot loader,,,,i am running energy 4.2.1 themed rom....what to do now??
Click to expand...
Click to collapse
i also haven't USB icon. It's normal, go to the next steps.
still bootlooping , same thing as yesterday , twrp recovery is working , all the partition and data are there , tried restoring my Nand backup ,again ! , bootlooping.
everything was working fine before , except for some of the sensors, (only affected some games like temple run 2 ) , so i said "hey , i have some free time , let's revert back to stock to see if i can get those sensors back on, WHAT COULD GO WRONG ! " , and here i am, wasted a day and a half trying to fix it , and now i'm really tempted to buy a sledgehammer. anyways thanks for your help : ) , you've been more helpful than others.
jaffer707 said:
On my bootloader there is no USB icon there are only 3 icons,,,,it is jb 4.2.1 boot loader,,,,i am running energy 4.2.1 themed rom....what to do now??
Click to expand...
Click to collapse
Fastboot protocol will start automatically when you connect your TF300 to your pc through usb cable when in bootloader :good: its the property of 4.2 bootloader
ningen90 said:
still bootlooping , same thing as yesterday , twrp recovery is working , all the partition and data are there , tried restoring my Nand backup ,again ! , bootlooping.
everything was working fine before , except for some of the sensors, (only affected some games like temple run 2 ) , so i said "hey , i have some free time , let's revert back to stock to see if i can get those sensors back on, WHAT COULD GO WRONG ! " , and here i am, wasted a day and a half trying to fix it , and now i'm really tempted to buy a sledgehammer. anyways thanks for your help : ) , you've been more helpful than others.
Click to expand...
Click to collapse
so.. if all your partitions are working now, why you don't flash rom from recovery. and did you do HARD formating of all partitions??
Ti2 said:
Fastboot protocol will start automatically when you connect your TF300 to your pc through usb cable when in bootloader :good: its the property of 4.2 bootloader
Click to expand...
Click to collapse
That's right!
aLkRicha said:
so.. if all your partitions are working now, why you don't flash rom from recovery. and did you do HARD formating of all partitions??
Click to expand...
Click to collapse
i did try that , tried flashing cm 10.1 , tried restoring my previous Nandbackup , nothing , with those custom roms , the tab doesnt go beyond the boot screen (with nividia logo) , with the official firmware it goes beyond that to the silver asus logo and the rotating circle
ningen90 said:
i did try that , tried flashing cm 10.1 , tried restoring my previous Nandbackup , nothing , with those custom roms , the tab doesnt go beyond the boot screen (with nividia logo) , with the official firmware it goes beyond that to the silver asus logo and the rotating circle
Click to expand...
Click to collapse
and what is after roating sircle? Try to do all points from the 1st post.
nothing , it's been stuck on this screen for more than half an hour , i did all the steps exactly like the first post(which i already did yesterday , but i did it again anyway ). btw on the boot screen , in the upper left corner , it says "keydriver is not found , booting os " what does it mean ?
ningen90 said:
nothing , it's been stuck on this screen for more than half an hour , i did all the steps exactly like the first post(which i already did yesterday , but i did it again anyway ). btw on the boot screen , in the upper left corner , it says "keydriver is not found , booting os " what does it mean ?
Click to expand...
Click to collapse
khm... try this:
go in recovery, run adb. paste
Code:
adb shell
next, if this command is successful paste
Code:
dd if=/dev/zero of=/dev/block/mmcblk0p4 bs=100 count=1
and
Code:
dd if=/dev/zero of=/dev/block/mmcblk0p3 bs=16 count=1
and go on 1st post. if it's good it is good if not.. go to the recovery and download in in your adb folder. Perform 4 and 5 or 6 points, and perform 1st post
after give it
Code:
fastboot reboot
, in the terminal i have this response
Code:
ERROR: could not clear input pipe; result e00002ed, ignoring...
ERROR: could not clear output pipe; result e00002ed, ignoring....
rebooting...
and tablet is freeze. Any solution ?
it booted , IT BOOTED !!!!!!!!!!!!!!
---------- Post added at 10:03 PM ---------- Previous post was at 09:59 PM ----------
i'm not sure why , but apparently it's related to root , whenever i tried to reboot from recovery ,it would ask me if i want to install superSU but i always chose to not install it , this try i decided to install it , and Viola ! , it booted
ningen90 said:
it booted , IT BOOTED !!!!!!!!!!!!!!
---------- Post added at 10:03 PM ---------- Previous post was at 09:59 PM ----------
i'm not sure why , but apparently it's related to root , whenever i tried to reboot from recovery ,it would ask me if i want to install superSU but i always chose to not install it , this try i decided to install it , and Viola ! , it booted
Click to expand...
Click to collapse
If i help you, i am happy for you :highfive:
riderskull said:
after give it
Code:
fastboot reboot
, in the terminal i have this response
Code:
ERROR: could not clear input pipe; result e00002ed, ignoring...
ERROR: could not clear output pipe; result e00002ed, ignoring....
rebooting...
and tablet is freeze. Any solution ?
Click to expand...
Click to collapse
i don't tell you do this comman. Wait for progress bar
thank you very much ! , (though the commands and executable didn't exactly work. adb isn't properly installed, so it's on my end ) but nonetheless , thanks , i probably wouldn't have done it if i weren't on this thread , btw , will be safe to flash a custom rom now ? , the last 2 days were excruciating , so i just want to be sure. are custom roms compatible with the new bootloader ? , i now this probably should be asked in the specific rom thread , but hey ! , it never hurts to ask
ningen90 said:
thank you very much ! , (though the commands and executable didn't exactly work. adb isn't properly installed, so it's on my end ) but nonetheless , thanks , i probably wouldn't have done it if i weren't on this thread , btw , will be safe to flash a custom rom now ? , the last 2 days were excruciating , so i just want to be sure. are custom roms compatible with the new bootloader ? , i now this probably should be asked in the specific rom thread , but hey ! , it never hurts to ask
Click to expand...
Click to collapse
I dont know. I try to flash DEODEX rom, but it isnt started.. custom roms i dont try to flash. So, i decidet to stay on the original firmware with root.

Serious issue

i urgently need help
I got some update from lg and after i agreed to install
phone doesn't boot
it goes into TWRP recovery
i tried putting it on download mode but its not happening
I tried hard resetting too
i deleted data and hence i dont have any files on my internal storage
I dont have a OTG cable .
pls help me out
i cant use terminal command also because there are no files in recovery folder
digkong said:
i urgently need help
I got some update from lg and after i agreed to install
phone doesn't boot
it goes into TWRP recovery
i tried putting it on download mode but its not happening
I tried hard resetting too
i deleted data and hence i dont have any files on my internal storage
I dont have a OTG cable .
pls help me out
i cant use terminal command also because there are no files in recovery folder
Click to expand...
Click to collapse
whether you can get into recovery and give you the download mode?Do you sec when starting up the phone LG logo?
Open LG supotr tool, connect your phone in download mode the tool detects the phone click on the option (top right corner) select upgrade recovery. PC will begin to download your original SW. wait and let the tool after the download and install SW (about 1 hour)
-installed drivers needed
-charged battery (90-100%)
Keep calm, pal !
Boot in TWRP, then "Advanced", then "Terminal Command" !
COPY THE FOLLOWING LINE VERY CAREFULLY : NO MISTAKE ALLOWED !
Code:
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota
Then reboot, it should work !
And remember : NO update from LG via OTA when rooted on the G2 !
rohecla said:
And remember : NEVER take OTA update when rooted on any phone!
Click to expand...
Click to collapse
Fixed.

[Q} Is there a Root for P8 Max?

Hi Guys.
Does anyone know if it is possible to root the P8 Max.
Thanks in advance.
I am also interested in this
+1
Not yet
I saw some guy posting in his blog on howto root p8 max
http://blog.livedoor.jp/cn221283/archives/51190024.html
Can somebody help to translate this, using google map doesnt help hehe..
dodzs said:
I saw some guy posting in his blog on howto root p8 max
http://blog.livedoor.jp/cn221283/archives/51190024.html
Can somebody help to translate this, using google map doesnt help hehe..
Click to expand...
Click to collapse
* i meant google translate
dodzs said:
* i meant google translate
Click to expand...
Click to collapse
The method only applies to P8 and the author says it might not be applicable to Max as the recovery is P8.
However, just for the record
1. Unlock the bootloader
http://emui.huawei.com/en/plugin.php?id=unlock&mod=detail
2. Fastbboot custom recovery *Need to create a TWRP recovery for the P8 Max
3. Root
https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip
4. Profit!
Leechoonhwee said:
The method only applies to P8 and the author says it might not be applicable to Max as the recovery is P8.
However, just for the record
1. Unlock the bootloader
http://emui.huawei.com/en/plugin.php?id=unlock&mod=detail
2. Fastbboot custom recovery *Need to create a TWRP recovery for the P8 Max
3. Root
https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip
4. Profit!
Click to expand...
Click to collapse
Managed to root my phone.. even when I have updated the EMUI to B018, but there was an issue.. I tell you below
Step I follow from Chinese Forum below...
Preparation step :
1. download the tools from
https://www.mediafire.com/?9drsdo2f6hn4j34
2. Extract the content to your local. Note there are two folders :
- Folder 1 is for the tool that contains the TWRP recovery.img and the adb/fastboot tool,
- Folder 2 is for the original recovery
3. Copy the SuperSU zip to your phone (either in internal or external memory of your phone)
Installation step :
Step 0, unlock your bootloader (search around on how to do it)
1. Since I am using mac, somehow I don't need to install any driver, but if you using windows, install all the driver yourself
2. Enable the developer mode in your phone, and after that enable the usb debugging
3. Turn off your phone, and boot to fastboot (in off mode, connect the phone with your PC then press Volume Up and Power Button together)
4. Since now your phone has been connected to the PC, go to that Tool folder in respective of your OS, then overwrite the recovery with TWRP with fastboot command (install custom recovery) *note : for mac just add "./" in every command
- check the whether its connected : fastboot devices
- install TWRP : fastboot flash recovery recovery.img
5. Restart your phone and boot to recovery
- restart : fastboot reboot
- after reboot, turn off your phone
- reboot to recovery : turn on your phone by holding Volume Down with Power button
- Now you are at TWRP
6. Install SuperSU (root)
- Install SuperSU zip that has already been copied to your phone using TWRP (use the Install mode)
7. Reboot the phone
- Use reboot function in twrp
8. Profit
Theoritically the above things works but I have some issues following the above :
- After step 4, after recovery being flashed with TWRP seems like my phone Boot Partition is being overwritten too
- So when I rebooted the phone, it boot to TWRP instead
- So I tried to re-flashed the recovery with the original EMUI rom recovery (go to the folder "2.P8Max_Official_Recovery(For_restoration)" to find the original recovery.img). Also note that in the this folder, the adb and fastboot is only for mac. The one for windows use it in the tools
- This is done by going to fastboot again, then do command : fastboot flash recovery recovery.img
- This time using the original recovery
- Now when I rebooted the phone, it goes to EMUI recovery, then I just clicked restart to system or something
- After this, everything fixed, and I have SuperSU install and phone rooted
You can follow the above, but do it at your own risk, I am not responsible if your phone brick hehehe..
Original chinese forum is here : http://cn.club.vmall.com/thread-4919441-1-1.html
dodzs said:
Managed to root my phone.. even when I have updated the EMUI to B018, but there was an issue.. I tell you below
Step I follow from Chinese Forum below...
Preparation step :
1. download the tools from
https://www.mediafire.com/?9drsdo2f6hn4j34
2. Extract the content to your local. Note there are two folders :
- Folder 1 is for the tool that contains the TWRP recovery.img and the adb/fastboot tool,
- Folder 2 is for the original recovery
3. Copy the SuperSU zip to your phone (either in internal or external memory of your phone)
Installation step :
Step 0, unlock your bootloader (search around on how to do it)
1. Since I am using mac, somehow I don't need to install any driver, but if you using windows, install all the driver yourself
2. Enable the developer mode in your phone, and after that enable the usb debugging
3. Turn off your phone, and boot to fastboot (in off mode, connect the phone with your PC then press Volume Up and Power Button together)
4. Since now your phone has been connected to the PC, go to that Tool folder in respective of your OS, then overwrite the recovery with TWRP with fastboot command (install custom recovery) *note : for mac just add "./" in every command
- check the whether its connected : fastboot devices
- install TWRP : fastboot flash recovery recovery.img
5. Restart your phone and boot to recovery
- restart : fastboot reboot
- after reboot, turn off your phone
- reboot to recovery : turn on your phone by holding Volume Down with Power button
- Now you are at TWRP
6. Install SuperSU (root)
- Install SuperSU zip that has already been copied to your phone using TWRP (use the Install mode)
7. Reboot the phone
- Use reboot function in twrp
8. Profit
Theoritically the above things works but I have some issues following the above :
- After step 4, after recovery being flashed with TWRP seems like my phone Boot Partition is being overwritten too
- So when I rebooted the phone, it boot to TWRP instead
- So I tried to re-flashed the recovery with the original EMUI rom recovery (go to the folder "2.P8Max_Official_Recovery(For_restoration)" to find the original recovery.img). Also note that in the this folder, the adb and fastboot is only for mac. The one for windows use it in the tools
- This is done by going to fastboot again, then do command : fastboot flash recovery recovery.img
- This time using the original recovery
- Now when I rebooted the phone, it goes to EMUI recovery, then I just clicked restart to system or something
- After this, everything fixed, and I have SuperSU install and phone rooted
You can follow the above, but do it at your own risk, I am not responsible if your phone brick hehehe..
Original chinese forum is here : http://cn.club.vmall.com/thread-4919441-1-1.html
Click to expand...
Click to collapse
So you mean that you can't enter system wile twrp is flashed??weard
rowihel2012 said:
So you mean that you can't enter system wile twrp is flashed??weard
Click to expand...
Click to collapse
Yap.. like i said, seems like the boot partition is overwritten with twrp.. so i got sort of twrp bootloop.... but after i reflash the original recovery.img using fastboot... then launch the recovery and click boot to system or sumthin.. everything back to normal...
weird... but i am no expert here... just lucky enough to not brick the phone
dodzs said:
Yap.. like i said, seems like the boot partition is overwritten with twrp.. so i got sort of twrp bootloop.... but after i reflash the original recovery.img using fastboot... then launch the recovery and click boot to system or sumthin.. everything back to normal...
weird... but i am no expert here... just lucky enough to not brick the phone
Click to expand...
Click to collapse
ok we just have to wait for twrp recovery worknig well with max
is the speaker really good?do you like it?
dodzs said:
Yap.. like i said, seems like the boot partition is overwritten with twrp.. so i got sort of twrp bootloop.... but after i reflash the original recovery.img using fastboot... then launch the recovery and click boot to system or sumthin.. everything back to normal...
weird... but i am no expert here... just lucky enough to not brick the phone
Click to expand...
Click to collapse
Instead of flashing the recovery to the phone you can just boot it one time. Just use fastboot boot recovery.img instead. This will load twrp and not flash it.
Sent from my C6806_GPe using Tapatalk
rowihel2012 said:
ok we just have to wait for twrp recovery worknig well with max
is the speaker really good?do you like it?
Click to expand...
Click to collapse
Speaker is damn good... but when playing games or watching movie, it is covered by the hand... so it would be better if the speaker is front facing..
otherwise it's good... but I do hate EMUI though... its making the experience sluggish...
Im try to unlock my p8max, when using Huawei unlock site dont allow unclock because log in by email account, they requested register with phone number, but im not in listed countries for receive a confirmation code by phone.
Who have registered Huawei account by phone please share,
Thanks
quynh2v said:
Im try to unlock my p8max, when using Huawei unlock site dont allow unclock because log in by email account, they requested register with phone number, but im not in listed countries for receive a confirmation code by phone.
Who have registered Huawei account by phone please share,
Thanks
Click to expand...
Click to collapse
Send an email to [email protected], with this in the mail :
Hello Huawei,
I would like to request the bootloader unlock code for my Huawei <phone version>
IMEI : xxxxxxxxxxxxxx
S/N : xxxxxxxxxxxxxxx
Product-ID : xxxxxxxxxxx
Regards, xxxxxxxxxxxxx
Click to expand...
Click to collapse
dodzs said:
Yap.. like i said, seems like the boot partition is overwritten with twrp.. so i got sort of twrp bootloop.... but after i reflash the original recovery.img using fastboot... then launch the recovery and click boot to system or sumthin.. everything back to normal...
weird... but i am no expert here... just lucky enough to not brick the phone
Click to expand...
Click to collapse
the stock recovery located in folder is chines how can we make it english?
rowihel2012 said:
the stock recovery located in folder is chines how can we make it english?
Click to expand...
Click to collapse
The stock recovery when it's launched, it's in English, dun worry I have re-flashed it as I mentioned in the prev post..
Anyway the stock recovery is extracted from the current available ROM for P8 Max, which is in chinese. There is no international ROM available yet for this phone.
dodzs said:
The stock recovery when it's launched, it's in English, dun worry I have re-flashed it as I mentioned in the prev post..
Anyway the stock recovery is extracted from the current available ROM for P8 Max, which is in chinese. There is no international ROM available yet for this phone.
Click to expand...
Click to collapse
so did you find working twrp recovery? i managed to flash it and install root and boot only one time
i could not boot so system again so i flashed the stock
is this a hoax?
http://www.guruswizard.com/2015/06/how-to-root-huawei-p8-max.html
BTW, I can't get fastboot working on my PC. When I put the phone in fastboot mode, my pc cant detect the device.
Root Huawei P8 Max 5.1.1
hi,
So, what is the real WORKING procedure to root our Huawei P8 Max with android version 5.1.1 ?
Thank you in advance for answering.

tb-7104f root?

Any hope in getting root for this model? from my research it seems to be rootable, but I can't find any rom or anything for it, even here in xda.
Any kind of help is greatly appreciated
IT IS NOT THAT MUCH HARD
i found a way to do it
>>First download latest magisk apk
Link - https://www.google.com/url?sa=t&sou...FjAAegQIAxAC&usg=AOvVaw2Xrf3Ndu6oqxqBK9TKilSx
>>Then download stock rom here
Link - https://www.google.com/url?sa=t&sou...AhWCbysKHUiHBUsQFjAAegQIAxAC&usg=AOvVaw3XrjI-
Sog1qkyLy9lXieK2vR&ampcf=1&cshid=1621397379367
[Sorry but u cant use latest firmware cuz its not available]
>>Then extract it and get boot.img
>>Patch it using latest magisk manager
Now lets go to install it
U can use pc if u have but if u dont then follow these steps
Share firmware file and patched boot file to other device and install bugajear app on other device [link- https://play.google.com/store/apps/details?id=eu.sisik.hackendebug]
>>Then open ur tab go to settings enable developer option and then enable oem unlocking and usb debugging on it
>>Enable usb debugging on other device also
>> Connect both through otg and then allow permission then reboot ur tab to bootloader [power+volume up button] u can use app also for that
NOW LETS UNLOCK BOOTLOADER FIRST [it will eras ur data take a backup]
>>Open bugajear after u boot into bootloader
>>Go on last option with sign of electricity and press on [<>] bottom right of ur other device
>>Type [fastboot flashing unlock] then run it
>>Choose yes on ur device with volume buttons [ sometime u press right volume button but it doesn't work then try other]
>>It will erase ur device but ur bootloader is now unlocked now just reboot to bootloader again
>> Now type [ fastboot flash boot ] click on embed sign on top right corner and then link ur file and run it
>>Now just extract ur firmware on other device too and get these files
System.img
Vendor.img
And flash them this is really needed or u end up in bootloop
And tada ur all set just reboot ur device and ur rooted
I am also tryibg to get twrp but it will take sometime
Thank you @Aks BRAR SOTHA.
I was stuck for so long because of the bootloader being locked.
But this...
Aks BRAR SOTHA said:
[ sometime u press right volume button but it doesn't work then try other]
Click to expand...
Click to collapse
Enoh_ said:
Thank you @Aks BRAR SOTHA.
I was stuck for so long because of the bootloader being locked.
But this...
Click to expand...
Click to collapse
Ur most welcome i got twrp also if u want i can upload it also
Aks BRAR SOTHA said:
Ur most welcome i got twrp also if u want i can upload it also
Click to expand...
Click to collapse
My main goal is to use the tablet as an LCD display for my PC sensors.
I need root to auto enable tethering on usb plug.
Device is still rebooting from the flash for now, but I think it should have done the trick for my purpose.
@Aks BRAR SOTHA Did you manage to prevent Android from updating ?
It tries to update and update fails. Then try again and again..
Edit: For my purpose, I can just disable WiFi, and no more update. But this is not the elegant way :/
Enoh_ said:
@Aks BRAR SOTHA Did you manage to prevent Android from updating ?
It tries to update and update fails. Then try again and again..
Edit: For my purpose, I can just disable WiFi, and no more update. But this is not the elegant way :/
Click to expand...
Click to collapse
Thats the big problem preventing it is not possible
If u are using internet from other device u can shift from wifi hotspot to bluetooth hotspot
I dont know any other way
Enoh_ said:
My main goal is to use the tablet as an LCD display for my PC sensors.
I need root to auto enable tethering on usb plug.
Device is still rebooting from the flash for now, but I think it should have done the trick for my purpose.
Click to expand...
Click to collapse
I got all type of recovery for our device
Twrp
Pbrp
Orangefox
Shrp
If u want any u can contact me
Aks BRAR SOTHA said:
I got all type of recovery for our device
Twrp
Pbrp
Orangefox
Shrp
If u want any u can contact me
Click to expand...
Click to collapse
Can you share the 4 recovery img please? Im looking for a Rom too.
Thanks in advance
angelote33 said:
Can you share the 4 recovery img please? Im looking for a Rom too.
Thanks in advance
Click to expand...
Click to collapse
Sure
angelote33 said:
Can you share the 4 recovery img please? Im looking for a Rom too.
Thanks in advance
Click to expand...
Click to collapse
This is my number
Ouiquqywyt
O-9 and u-7 decode this i cant share straight msg me here on instagram. I used letters according to numbers on qwerty keyboard
I just found this thread and thanks for the instructions. I was able to successfully root my tablet using this method. Of course it kept wanting to update and failed during the process so I thought I would try to get the update patched...
with the device rooted (with the old firmware) allow the update to download
get a shell with `adb shell` and then `su -` (approve the root request on the device)
the zip file is located in `data/data/com.lenovo.ota/fileslenovoota` unzip it and copy boot.img to somewhere the magisk app can find (I used `/sdcard/Download/`)
patch the boot.img with magisk
use adb pull to get the patched img onto your computer
boot into fastboot and flash the original boot.img, system.img, vendor.img from the zip provided above (in the original instructions)
reboot the tablet. The update should now be able to complete
once complete, reboot into fastboot again and flash the updated patched boot.img
reboot and you should be on the latest version and be rooted.
I've also attached the patched boot.img from the update

Categories

Resources