So. I was unrooting my phone to get the B574 but it failed. Its still on Android 5.0.1 but the wifi connection doesnt work. Is there any way to fix it? Ive been searching for hours but i just cant find something. Please help me.
EDIT: After doing a factory reset, which hasnt helped in any way, i found a solution by myself. There is no real thread about it i think so ill explain it here and hope i can help someone.
If its stuck on 'connecting...' and switches to 'Avoided poor connection' after 1-2 minutes all you need to do is:
Forget Network -> Click on it -> Show advanced options -> IP Settings: Static IP and retype everything what is given.
This will let you connect again.
Related
So as I was en route to completing a full flash of my Droid X onto Cricket I couldn't get my web working. Two things I hadn't done were my autosh files and my NVRAM from whiterabbit.org I got my NVRAM file from whiterabbit and wrote it to the phone. it wrote. I restarted the phone and everytime it starts it goes to 1x , then up to 3g, then restarts. everytime. Just enough time to allow me to put it into airplane mode so that I can try to fix it. I didn't backup my NVram sadly so if anyone has a backup please send it my direction. It would be greatly appreciated. this is fixable since i can access my phone still.
-Update today-
Not sure if it means anything but i went into QPST and switched my Mobile IP behavior from mob+simp f/back to simple ip only and it and now it doesnt constantly restart i switched it to mobile ip only, same result, but data still isnt working yet. switching back to mob+simp f/back makes it restart it seems.n
Also noticed that when I turn on my wifi and I switch it to simple IP only it still puts me in a reset loop.
furikazashi said:
So as I was en route to completing a full flash of my Droid X onto Cricket I couldn't get my web working. Two things I hadn't done were my autosh files and my NVRAM from whiterabbit.org I got my NVRAM file from whiterabbit and wrote it to the phone. it wrote. I restarted the phone and everytime it starts it goes to 1x , then up to 3g, then restarts. everytime. Just enough time to allow me to put it into airplane mode so that I can try to fix it. I didn't backup my NVram sadly so if anyone has a backup please send it my direction. It would be greatly appreciated. this is fixable since i can access my phone still.
-Update today-
Not sure if it means anything but i went into QPST and switched my Mobile IP behavior from mob+simp f/back to simple ip only and it and now it doesnt constantly restart i switched it to mobile ip only, same result, but data still isnt working yet. switching back to mob+simp f/back makes it restart it seems.n
Also noticed that when I turn on my wifi and I switch it to simple IP only it still puts me in a reset loop.
Click to expand...
Click to collapse
Did you also write the PRL to the phone after writing the NVRAM? Your PRL should be version 49027. mob+simp f/back will need to be enabled.
If you want to start over, you can SBF to .340 or use the maderstcok zip .340 and your DX will be up to date and fully stock.
I've used bootstrap and rom manager to go back to stock before altering web so that isn't an issue anymore. I've stopped trying the nvram. Everytime I enter the proxy info fully inthe phone manually the phone does the 1x 3g then reset loop. Im guessing something is forcing a reset but can't figure it out. I went into test mode once to force 1x only and keep out 3g but alas it still looped. Ideas? Im also installing log cat to see if maybe a log.can tell me why the phone soft resets during the.loop
Sent from my DROIDX using XDA App
Im using prl 49027. I've narrowed it down to possible glitch. Upon entering the info for the proxy manually it goes into 1x then 3g then reader loop. Ivebeen using a stock backup to revert to prior tweaking so I can keep trying to figure this out if u have a exact method u use im all ears. Or just ideas. Im running out lol
Also one more thing, ive just entered in the proxy information manually via the cell phone and the phone hasnt given me a boot loop like it used to, still the internet isnt working yet so im going to go into QPST and see if just changing the mobile IP setting throws me into the loop again...EDIT: it sends me into a soft restart loop since its on mob+simp f/back again... catlog didnt show anything that i can see sadly. the soft restart forces the log to stop and doesnt show why it did.switched it back to mobile ip only and stopped the reboot cycle but no data at all ugh...
EDIT: used my backup again after the reboot cycle issue , found out that after i end up using a NVRAM i get the boot loop again...so in other words i unfortunately have to factory reset because i used the NVRAM addon, one thing i noticed was it updated 11 things, not 12. not sure why. moving on..
furikazashi said:
Im using prl 49027. I've narrowed it down to possible glitch. Upon entering the info for the proxy manually it goes into 1x then 3g then reader loop. Ivebeen using a stock backup to revert to prior tweaking so I can keep trying to figure this out if u have a exact method u use im all ears. Or just ideas. Im running out lol
Also one more thing, ive just entered in the proxy information manually via the cell phone and the phone hasnt given me a boot loop like it used to, still the internet isnt working yet so im going to go into QPST and see if just changing the mobile IP setting throws me into the loop again...EDIT: it sends me into a soft restart loop since its on mob+simp f/back again... catlog didnt show anything that i can see sadly. the soft restart forces the log to stop and doesnt show why it did.switched it back to mobile ip only and stopped the reboot cycle but no data at all ugh...
EDIT: used my backup again after the reboot cycle issue , found out that after i end up using a NVRAM i get the boot loop again...so in other words i unfortunately have to factory reset because i used the NVRAM addon, one thing i noticed was it updated 11 things, not 12. not sure why. moving on..
Click to expand...
Click to collapse
So you did this in QPST:
-----NV items from http://www.whiterabbit.org/android (you must generate this uniquely for your phone, go to the link enter [email protected] replace x's with your 10 digit phone number, make sure 2.7 is selected and download the file)
----Now go to the Memory tab. Under NV Items click Write. Browse and select
the NV Item file you generated earlier. Once its done it will say 12 NV
Items were successfully written to the phone
-----I used the PRL attached to do the OTA. (CricketEVDO_38515.prl). I had to put .zip at the end to upload it, so just rename it to CricketEVDO_38515.prl.
-----Now go to the Other tab. Under PRL click Write and browse to the destination you saved the attached file.
Let me know if this helps at all.
I sent NV items from the whiterabbit but this time it updated 12 items, not sure why it did 11 the first time. i also updated the prl to 38515 still no internet though, going into pst to see if the mobile ip behavior is the way its supposed to, update in a sec
UPDATE: phone was set to mobile ip only switched back to mob + simp f/back. and VOILA. 4:28am two weeks later and BAM internet and voice I will be writing a tutorial basing what ive learned into a stable 99% success rate for flashing droid x to cricket, ive only seen a handful out there and im sure i can hepl someone the way everyne has assisted me. thank you everyone. also just upgraded to 49027 prl for 3g and works great not enough 1x coverage where i live sadly.
Hi all, I'm new to the forum and need some help. I have an MF3 rooted GS4. Last night I did a factory reset and after going through the process, I received a message that said com.android.phone process stopped working. I tried to make a call and had no issues. I was also connected to home wifi so no data issues. Today I added ATT visual voicemail (worked before the reset) and couldn't get an authentication and it said check APN. I go into that and notice the settings are gone and there is no option for Phone or ATT - I also can't access any 4G LTE data. I found some APN settings, entered and then it worked. I then did one more reset to ensure all was well and start from scratch and the processed stopped message showed up again.
Edit: this also shows up each time I restart the phone. Eventually goes away and LTE Data shows up.
Why does the process show up after reboot? Is there anything I can do to make the error go away? Anything wrong with using the APN manually entered if it works?
Thanks for any help you can provide
So I found out that the APN settings stick and I have LTE, but the error shows up twice on each reboot. Hoping someone can help me to get this fixed.
HELP,
My S5 forgets wifi passwords when wifi is disconnected... HELP ME please...
I have the last rom G900FXXU1ANG9.
My S5 doesn't have the problem you cite.
We can't see your phone though and you didn't provide any meaningful amount of information to help us narrow anything down. You should describe, step by step and in detail how you are connecting to wifi. And provide a description or at least screen shot of your wifi settings. Without that critical information it's rather hard for anyone to tell if you are missing any steps or doing something that has this effect.
.
SG5 Lost Wifi Passwords
Here is my dilemma. I've rooted the phone and looked at the wpa_supplicant.conf file with Root Explorer. Now when I connect to my router the network shows up fine. The psk number is not the correct number/password that I put in.
The line says: psk- 5391587b25ee56324ed273114c137303. When ever I put the correct password in this is what shows up.
When I reboot the phone I have to enter the correct password and it connects but doesn't save it in the psk I believe. It just shows up with a number like above.
I also have an Lg 8" tablet that I've rooted and when I look at the same file it shows the correct password.
Any help would be appreciated.
BTW when I disconnect from the router and leave the house and return the phone will connect to the router of course the wifi is on. When I turn the wifi off then back on or when I turn the phone off and reboot the next day I have to put the password in. When I looked at the psk again I get the above number.
Thanks in advance.
Afrosheen said:
Here is my dilemma. I've rooted the phone and looked at the wpa_supplicant.conf file with Root Explorer. Now when I connect to my router the network shows up fine. The psk number is not the correct number/password that I put in.
...
Thanks in advance.
Click to expand...
Click to collapse
I don't have any additional info except to report that I have run into the same problem, wifi passwords forgotten when wifi turned off and then back on. I am running rooted NE9 under Safestrap.
-fjb3
I have the same issue, everytime i want to connect to my wi-fi, at home or at the office, i have to enter the password.
Sent from my SM-G901F using XDA Free mobile app
Trie to clear cache and dalvick and if dont work trie to install a New firmwere.
Hello guys,im expiriencing strange issue with wifi in last couple of weeks.Im sorry if someone already posted thread with this issue,i couldnt find it anywhere on XDA.
Here is the problem:
i have sm n9005 and i was using stock 5.0 first,and then decided to try some custom roms.It was all good,and i changed couple of those.
At one point,i did firmware/bootloader update for some of the roms,i cant remember which one exactly,and phone started to act strange.
It could only see and connect known wifi networks (my home and work ones) and as much scanning i used,it simply can not see/scan other
networks in the area.Its really annoying.When i do factory reset/data on any rom,its all good for some time,sometimes like few hours,sometimes
few days,but it all gets f_____ up again,and i can only use networks i already used in the beggining.I tried few times to flash stock rom via Odin,
it was all good,but after some time (as i said,sometimes less sometimes more time) its acting strange again.Maybe im flashing wrong stock rom
in Odin,i cant really tell whats going on.Current baseband version is n9005xxugpof3,if anyone knows how to solve this,please help,i will provide
any data needed in order to solve this annoying problem.Thank you in advance and God bless you!
p.s.
here is the version of stock rom i flashed,its N9005XXUGBOA5_N9005XEOGBOA4_N9005XXUGBOA1_HOME.tar and i think its Poland version
or something like that.
update:
tried to flash original italian ITV stock rom,all worked fine for a day or so,and it all went back wrong again :/
Phone is not showing any WIFI network,but when i add it manualy,which i tried with my home network,
it works well.Also,its sending me notification when available networks are on,but when i enter wifi
section,list is empty again : / Mac adress in my wifi options is ok,and IP adress is unknown.
Any ideas,guys,i would really appreciate any sort of help?Thanks!
Guys I'm not able to use my WiFi anywhere. Its been irritating from when it stopped connecting.I have been trying changing different ROMs,different wipes and stuff but still I can see no change. I can see that there is blank IP address and when ever I go to WiFi section I just keeps loading and doesn't show up any networks. Please help
zeeshanalpha said:
Guys I'm not able to use my WiFi anywhere. Its been irritating from when it stopped connecting.I have been trying changing different ROMs,different wipes and stuff but still I can see no change. I can see that there is blank IP address and when ever I go to WiFi section I just keeps loading and doesn't show up any networks. Please help
Click to expand...
Click to collapse
Flash latest factory image via fastboot which will completely wipe your phone, backup your important stuff to PC .