Related
I have an s7 edge sm-g935w8 (Canadian) model and I've heard on the firmware ending with APD has a battery drain bug and I'm thinking about downgrading the stock ROM to the rom ending in APB. I downloaded the ROM but the site didn't specify which carrier it is for. I am on Rogers but I'm wondering if it turns out to be a bell ROM it would still work. I compared a rogers ROM and bell ROM and they have the exact file name. So can anyone confirm its OK to flash? I don't want to brick it. I read somewhere that all the Canadian Roms are the same.
orlans21 said:
I have an s7 edge sm-g935w8 (Canadian) model and I've heard on the firmware ending with APD has a battery drain bug and I'm thinking about downgrading the stock ROM to the rom ending in APB. I downloaded the ROM but the site didn't specify which carrier it is for. I am on Rogers but I'm wondering if it turns out to be a bell ROM it would still work. I compared a rogers ROM and bell ROM and they have the exact file name. So can anyone confirm its OK to flash? I don't want to brick it. I read somewhere that all the Canadian Roms are the same.
Click to expand...
Click to collapse
Take a look over here:
http://forum.xda-developers.com/showthread.php?t=3335065
Sent from my SM-G935F using XDA-Developers mobile app
eRPeeX said:
Take a look over here:
http://forum.xda-developers.com/showthread.php?t=3335065
Sent from my SM-G935F using XDA-Developers mobile app
Click to expand...
Click to collapse
I posted in there then someone else told me to start my own topic.
eRPeeX said:
Take a look over here:
http://forum.xda-developers.com/showthread.php?t=3335065
Sent from my SM-G935F using XDA-Developers mobile app
Click to expand...
Click to collapse
That topic is about the European S7Edge (SM-G910F), NOT the Canadian one (a whole different firmware!)...
Here's the APB firmware for Rogers
http://forum.youmobile.org/downloads/?sa=view&down=15060
lazard said:
Here's the APB firmware for Rogers
http://forum.youmobile.org/downloads/?sa=view&down=15060
Click to expand...
Click to collapse
Thank you very much but I have downloaded the firmware already but I'm just not sure if its rogers or bell. What were to happen if I flashed it and it was bell and it didn't work? Soft brick? I would be able to go into stock recovery and factory reset if anything.
Haha nevermind I realized it was the wind mobile carrier version that I downloaded.
Hey XDA,
I just recently purchased a AT&T S7 (SM-G930A). I also just recently found out that AT&T doesn't push updates to non AT&T network phones. I am using the phone with T-Mobile and I was wondering if it was possible to flash the T-Mobile stock rom without tripping Knox or anything of that sort. I remember being able to do this to my AT&T Note 2 back in the day. If it is possible, can someone kindly link me to the file and instructions on how to flash the stock ROM from T-Mobile? Thanks!
You can, however once you do you can't go back. It may be possible in the future, but Tmobile has a v3 bootloader, and AT&T is still on v2 bootloader.
Sent from my SAMSUNG-SM-G935A using XDA-Developers mobile app
highaltitude said:
You can, however once you do you can't go back. It may be possible in the future, but Tmobile has a v3 bootloader, and AT&T is still on v2 bootloader.
Sent from my SAMSUNG-SM-G935A using XDA-Developers mobile app
Click to expand...
Click to collapse
Thank you! One more question, I have the stock T-Mobile ROM and for the CSC, there are two files:
CSC and HOME_CSC
Which one do I choose in Odin for the CSC option?
Thanks
When attempting to flash using Odin 3.12.3, I get this error in the log:
FAIL! SHA256 is invalid
This seems to be because of a corrupt file?
I downloaded the ROM from two different sources now and still I get the same error.
Thanks
IbbiAnsi said:
When attempting to flash using Odin 3.12.3, I get this error in the log:
FAIL! SHA256 is invalid
This seems to be because of a corrupt file?
I downloaded the ROM from two different sources now and still I get the same error.
Thanks
Click to expand...
Click to collapse
use different version ODIN available in root guide in Verizon thread
kuduku said:
use different version ODIN available in root guide in Verizon thread
Click to expand...
Click to collapse
Thank you so much!! This worked!
And I figured ou the difference between HOME_CSC and CSC:
HOME_CSC keeps your data while CSC wipes it
Thanks so much
IbbiAnsi said:
Thank you so much!! This worked!
And I figured ou the difference between HOME_CSC and CSC:
HOME_CSC keeps your data while CSC wipes it
Thanks so much
Click to expand...
Click to collapse
So TMobile ROM on 930A . Any issues ? Did you try going back to AT&T ROM
All that talk out bootloader versions and not able to restore back to AT&T ROM
Can you odin Unlocked 930U version ?
I'm using Cricket on AT&T S7 variant and I couldn't get any update from AT&T, which pissed me off. So I decided to flash G930U firmware and I succeeded. But unfortunately, there isn't a single G930U update been released so far, which is quite surprising.
Other than the update, I'm extremely satisfied with the new firmware. It's so fast and clean comparing to my previous bloated AT&T firmware, free of all kinds of overheating, battery dropping, slowing down, crashing, auto-restarting, bugs and lags (Just so you know, my G930A firmware was the newest. I had to take my phone to Best Buy to update. And I used PDP to disable bloatwares). I highly recommend everyone to flash G930U. The new firmware also has an APP called Samsung+. It's very useful and it tells you if it detected slow charging, or reminds you to restart your phone if it hasn't been restarted for a while, etc.
I'm still wondering if I can receive OTA after flashing anther variant firmware, but I can't confirm since there's no update for G930U yet. I'm curious to know if OP could receive any T-Mobile update after flashing.
kuduku said:
So TMobile ROM on 930A . Any issues ? Did you try going back to AT&T ROM
All that talk out bootloader versions and not able to restore back to AT&T ROM
Can you odin Unlocked 930U version ?
Click to expand...
Click to collapse
No issues at all so far. Works perfectly. I don't really want to go back to the stock ATT ROM because I don't need it.
Sent from my SM-G930T using Tapatalk
hugeadrian said:
I'm using Cricket on AT&T S7 variant and I couldn't get any update from AT&T, which pissed me off. So I decided to flash G930U firmware and I succeeded. But unfortunately, there isn't a single G930U update been released so far, which is quite surprising.
Other than the update, I'm extremely satisfied with the new firmware. It's so fast and clean comparing to my previous bloated AT&T firmware, free of all kinds of overheating, battery dropping, slowing down, crashing, auto-restarting, bugs and lags (Just so you know, my G930A firmware was the newest. I had to take my phone to Best Buy to update. And I used PDP to disable bloatwares). I highly recommend everyone to flash G930U. The new firmware also has an APP called Samsung+. It's very useful and it tells you if it detected slow charging, or reminds you to restart your phone if it hasn't been restarted for a while, etc.
I'm still wondering if I can receive OTA after flashing anther variant firmware, but I can't confirm since there's no update for G930U yet. I'm curious to know if OP could receive any T-Mobile update after flashing.
Click to expand...
Click to collapse
I flashed to the latest update of the ROM so I can't prove it works. But from what I've heard, after flashing the ROM you need to factory reset the phone so it can unregister from att and register to whatever carrier you are using it on. I am not sure how true this is but I read it somewhere and it seems to make sense.
Sent from my SM-G930T using Tapatalk
IbbiAnsi said:
No issues at all so far. Works perfectly. I don't really want to go back to the stock ATT ROM because I don't need it.
Sent from my SM-G930T using Tapatalk
Click to expand...
Click to collapse
if you ever switch ROMs please check about the issue of bootloader version and not able to revert back .
Not able to revert back is the only issue keeping me from odin to T mobile ROM
If bootloader version is a problem then you cannot flash 930U firmware also
Is that so ?
kuduku said:
if you ever switch ROMs please check about the issue of bootloader version and not able to revert back .
Not able to revert back is the only issue keeping me from odin to T mobile ROM
If bootloader version is a problem then you cannot flash 930U firmware also
Is that so ?
Click to expand...
Click to collapse
I'm not sure what bootloader the G930U has. The att ROM has v2. If it's newer than that, then downgrading isn't possible. Is its the same, then it should be fine.
Sent from my SM-G930T using Tapatalk
Wonder if wifi calling works using a TMobile firmware with att service
joe3681 said:
Wonder if wifi calling works using a TMobile firmware with att service
Click to expand...
Click to collapse
T-mobile WiFi calling works fine on the T-mobile ROM.
Sent from my SM-G930T using Tapatalk
IbbiAnsi said:
I'm not sure what bootloader the G930U has. The att ROM has v2. If it's newer than that, then downgrading isn't possible. Is its the same, then it should be fine.
Sent from my SM-G930T using Tapatalk
Click to expand...
Click to collapse
930A and 930U both have to be similar bootloader , thats why we could change ROMs
kuduku said:
930A and 930U both have to be similar bootloader , thats why we could change ROMs
Click to expand...
Click to collapse
If they are the same, then switching between them should be fine.
Sent from my SM-G930T using Tapatalk
IbbiAnsi said:
No issues at all so far. Works perfectly. I don't really want to go back to the stock ATT ROM because I don't need it.
Could you please check for me if T-Mobile ROM has portuguese language?
Thank you
Click to expand...
Click to collapse
IbbiAnsi said:
If they are the same, then switching between them should be fine.
Sent from my SM-G930T using Tapatalk
Click to expand...
Click to collapse
query is switching from T mobile ROM back to AT&T . Please update if and when you do it
kuduku said:
query is switching from T mobile ROM back to AT&T . Please update if and when you do it
Click to expand...
Click to collapse
This won't be possible until ATT decides to update to bootloader V3
Sent from my SM-G930T using Tapatalk
I was also able to flash the 930T on my 930A. I saw there was a Note 7 port but you need root and TWRP. Haven't tried flashing back to 930U yet, but thinking about it.
I have an s7 edge (G935W8) which is from canada. I am using it in india right now. I want to get volte working on my device which from searches i've found that i need to have indian firmware installed on my phone.
So i tried several firmwares, MM and N also, but no luck with odin. It is giving errors straight away ( repartition operation failed and oltht). Tried different firmwares, only ap and csc, repartition ticked and unticked and all the stuff that i've founded on the internet.
I don't want to root, i want only official Indian firmware on my S7 EDGE from CANADA (SM-G935W8).
Please guys help me out with that. I want it done.
ajay.chopra312 said:
I have an s7 edge (G935W8) which is from canada. I am using it in india right now. I want to get volte working on my device which from searches i've found that i need to have indian firmware installed on my phone.
So i tried several firmwares, MM and N also, but no luck with odin. It is giving errors straight away ( repartition operation failed and oltht). Tried different firmwares, only ap and csc, repartition ticked and unticked and all the stuff that i've founded on the internet.
I don't want to root, i want only official Indian firmware on my S7 EDGE from CANADA (SM-G935W8).
Please guys help me out with that. I want it done.
Click to expand...
Click to collapse
There is no indian firmware for canadian version
matthew2man said:
There is no indian firmware for canadian version
Click to expand...
Click to collapse
So many videos out there for the other countries for changing the csc. Why not for canadian one?
because G935W8 have csc for canadian carriers, not same csc as G935F the international one
matthew2man said:
because G935W8 have csc for canadian carriers, not same csc as G935F the international one
Click to expand...
Click to collapse
That means i can't get volte in any manner?
ajay.chopra312 said:
That means i can't get volte in any manner?
Click to expand...
Click to collapse
Don't think you can do it unless you can flash indian bp/cp
HeavenlyFall said:
Don't think you can do it unless you can flash indian bp/cp
Click to expand...
Click to collapse
And i want instructions on the same. Please guide me with that.
Edit : if i root my device and install custom rom, can i be able to get back to stock indian firmware?
ajay.chopra312 said:
And i want instructions on the same. Please guide me with that.
Edit : if i root my device and install custom rom, can i be able to get back to stock indian firmware?
Click to expand...
Click to collapse
Yes, you can get back to the stock firmware from custom ROM. All of the stock firmwares/os are here: https://www.sammobile.com/firmwares/ and can be flashed with odin, resetting the phone to factory default state, i.e. as you buy it now and without any info on it. No matter if it was custom ROM or not before that.
high_voltage said:
Yes, you can get back to the stock firmware from custom ROM. All of the stock firmwares/os are here: https://www.sammobile.com/firmwares/ and can be flashed with odin, resetting the phone to factory default state, i.e. as you buy it now and without any info on it. No matter if it was custom ROM or not before that.
Click to expand...
Click to collapse
I was looking forward for getting to indian firmware on my canadian edge
ajay.chopra312 said:
I was looking forward for getting to indian firmware on my canadian edge
Click to expand...
Click to collapse
Depends on the model. If on the site there is canadian firmware for that model of the s7 - can be done via odin. If the phone is specific and there is no canadian firmware - can't be done.
high_voltage said:
Depends on the model. If on the site there is canadian firmware for that model of the s7 - can be done via odin. If the phone is specific and there is no canadian firmware - can't be done.
Click to expand...
Click to collapse
I think only the F model can have firmware from other countries flashed onto it.
Sent from my SM-G935F using Tapatalk
daniel4653 said:
I think only the F model can have firmware from other countries flashed onto it.
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
Any candian csc which could support volte from jio in india?
Have a question here, we get a lot of US imported phones here in Pakistan, mostly AT&T and Verizon S7 edge phones.
They've got carrier bloat and whatnot, I remember reading people flashing Verizon ROMs to get that to work properly on their AT&T phone and flashing AT&T on a T-Mobile phone to get that to work properly, so if one flashes a G935U firmware on a G935V, is it expected to work fine and act as an ordinary Snapdragon 820 S7 edge with no carrier bloat or anything?
All replies will be appreciated.
Thanks
murtaza02
Sent from my SM-G955F
I tried flashing G930U on my G930V through odin but it failed. It appears that I can't flash anything using odin. The only way by which I was able to install a firmware manually was through stock recovery by Applying update from sd card.
Sent from my SM-G930V using Tapatalk
https://forum.xda-developers.com/att-s7-edge/how-to/samsung-sm-935u-firmware-install-guide-t3411451
Have u checked this thread ...
Sent from my ONEPLUS A3010 using Tapatalk
sirius_gamer said:
I tried flashing G930U on my G930V through odin but it failed. It appears that I can't flash anything using odin. The only way by which I was able to install a firmware manually was through stock recovery by Applying update from sd card.
Sent from my SM-G930V using Tapatalk
Click to expand...
Click to collapse
What version of Odin did you try to use and which particular 930U firmware?
babarasghar said:
https://forum.xda-developers.com/att-s7-edge/how-to/samsung-sm-935u-firmware-install-guide-t3411451
Have u checked this thread ...
Sent from my ONEPLUS A3010 using Tapatalk
Click to expand...
Click to collapse
I have, but there have been reports of it not working for some people as well, so I wanted to know if it's a legit method or if it's trial and error and it works for some and it doesn't work for others, because if it does work officially, then it'd solve a huge headache on choosing US variant phones here and we can all relax since the 935U firmware can be flashed on carrier branded phones.
Now, I need to get my hands on an American S7 edge to test this out myself.
Off course without testing nothing can be confirmed ... But most people r too faint hearted to try it
Sent from my ONEPLUS A3010 using Tapatalk
murtaza02 said:
What version of Odin did you try to use and which particular 930U firmware?
Click to expand...
Click to collapse
Odin version: 3.10.7
Firmware: G930UUEU4APL2
sirius_gamer said:
Odin version: 3.10.7
Firmware: G930UUEU4APL2
Click to expand...
Click to collapse
Try Odin 3.12.3 and the latest Nougat firmware for the G930U with the XAA (unlocked) CSC.
murtaza02 said:
Try Odin 3.12.3 and the latest Nougat firmware for the G930U with the XAA (unlocked) CSC.
Click to expand...
Click to collapse
Btw which files (AP, BL, CSC etc) I need to flash through odin? As I have noted that flashing CSC renders non-verizon sim unusable.
Sent from my SM-G930V using Tapatalk
sirius_gamer said:
Btw which files (AP, BL, CSC etc) I need to flash through odin? As I have noted that flashing CSC renders non-verizon sim unusable.
Sent from my SM-G930V using Tapatalk
Click to expand...
Click to collapse
All of them. AP includes the system, recovery and cache, CP includes modem, BL includes bootloader, and CSC includes sales code.
The ROMs for S7 usually come with CSC and HOME_CSC, the latter will not wipe your device and keep the Verizon CSC which may cause issues and require you to factory reset your phone, the normal CSC files wipes the data and switches your CSC to the new one you're trying to flash.
Choose whichever one you want but I'd suggest the normal CSC just to be safe.
Sent from my SM-G955F
murtaza02 said:
All of them. AP includes the system, recovery and cache, CP includes modem, BL includes bootloader, and CSC includes sales code.
The ROMs for S7 usually come with CSC and HOME_CSC, the latter will not wipe your device and keep the Verizon CSC which may cause issues and require you to factory reset your phone, the normal CSC files wipes the data and switches your CSC to the new one you're trying to flash.
Choose whichever one you want but I'd suggest the normal CSC just to be safe.
Sent from my SM-G955F
Click to expand...
Click to collapse
Apparently I was using older version of Odin. The version you told worked for me and now I have installed G930U firmware
Sent from my SM-G930U using Tapatalk
sirius_gamer said:
Apparently I was using older version of Odin. The version you told worked for me and now I have installed G930U firmware
Sent from my SM-G930U using Tapatalk
Click to expand...
Click to collapse
Hows it working for you?
Sent from my SM-G955F
murtaza02 said:
Hows it working for you?
Sent from my SM-G955F
Click to expand...
Click to collapse
The main issue with me was poor battery life which was resolved when I reverted back to marshmallow. But I have yet to test the battery life on nougat. Other than this, phone is running smoothly and it feels light now due to no bloatware.
Sent from my SM-G930U using Tapatalk
sirius_gamer said:
The main issue with me was poor battery life which was resolved when I reverted back to marshmallow. But I have yet to test the battery life on nougat. Other than this, phone is running smoothly and it feels light now due to no bloatware.
Sent from my SM-G930U using Tapatalk
Click to expand...
Click to collapse
Thanks for testing out and giving feedback.
Sent from my SM-G955F
id like to know can i flash the 930u on a metropcs 930t1
Have been trying all day to load 935u on my sprint phone and it loads but it just boots into the same sprint firmware, anyway for me to change this?
Just tried to redo this, so maybe i was mistaken that it loaded....FAILS at installing boot.
jmaloy5365 said:
Have been trying all day to load 935u on my sprint phone and it loads but it just boots into the same sprint firmware, anyway for me to change this?
Just tried to redo this, so maybe i was mistaken that it loaded....FAILS at installing boot.
Click to expand...
Click to collapse
What firmware are you using and what version of Odin?
Sent from my SM-G955F
eljefe0000 said:
id like to know can i flash the 930u on a metropcs 930t1
Click to expand...
Click to collapse
You probably can, try it out, worst case scenario it fails and you'll just boot back into your normal MetroPCS firmware.
Sent from my SM-G955F
murtaza02 said:
What firmware are you using and what version of Odin?
Sent from my SM-G955F
Click to expand...
Click to collapse
It was me, I was loading the wrong firmware. The 935U firmware will load onto Sprint phone and am using it on Straight Talk.
Which Firmware did you use ?
sirius_gamer said:
Apparently I was using older version of Odin. The version you told worked for me and now I have installed G930U firmware
Sent from my SM-G930U using Tapatalk
Click to expand...
Click to collapse
Hi can you please tell which firmware did you use. There are many options under the locations Tab which one should i Use ?
I am searching on SAMMOBILE when i search SM-G935U. On the the first page i select US (T-Mobile)
On the second page, in the countries TAB which option i need to select ?
---------- Post added at 02:25 PM ---------- Previous post was at 01:55 PM ----------
jmaloy5365 said:
It was me, I was loading the wrong firmware. The 935U firmware will load onto Sprint phone and am using it on Straight Talk.
Click to expand...
Click to collapse
Hi how are you.
Can you please let me know which country did you use while downloding the U firmware ? I have a t-mobile s7 edge
False Alert
Check out post #42
https://forum.xda-developers.com/showthread.php?p=75423115
"After being tested by XDA Senior member me2151, it turns out cross region flashing does work. Prince Comsy Odin is working, but we can not test if the factory binary flashing will hard brick your phone. So flashing US unlocked onto a US carrier device should work."
Source: https://www.xda-developers.com/samsung-galaxy-s8-note8-bootloader-odin/
Credits to @mweinbach for updating the news post and @me2151 for testing the brick
Oh, so Verizon to T-Mobile swap is fine.
Thanks for the heads up!
Whilst your post is is informative, I hope you will excuse me being a little pedantic, if the phone is "hard bricked" it can't be fixed and conversely if it cab be fixed then generally that would be considered "soft bricked".
Sent from my [device_name] using XDA-Developers Legacy app
paul_59 said:
Whilst your post is is informative, I hope you will excuse me being a little pedantic, if the phone is "hard bricked" it can't be fixed and conversely if it cab be fixed then generally that would be considered "soft bricked".
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
So far it CAN'T be fixed, so for now consider it a hard brick.
And stop arguing semantics when we are trying to actually help people and warn them before they brick their phones.
Very scary. Prevents Comsey ODIN from working?
Source : Portal of XDA
https://www.xda-developers.com/samsung-galaxy-s8-note8-bootloader-odin/
So does it apply to the international model too? If I get a G955F from Germany and flash a XEU firmware, it will brick?
I Have a doubt here. I am in a unlocked tmobile firmware on oreo beta. I was planning to flash unlocked firmware to it. so my question is
1) If i flashed unlocked US firmware G955U1 to G955U now, will it hardbrick after BLv3 update.
2)If i flashed now and updated to Blv3 after G955U1 will it be stuck to that firmware forever?
Thanks
xdanilva said:
This applies to all American/Snapdragon and Exynos S8, S8+ and Note 8 models once BLv3 comes out for those models.
If you flashed a out of region firmware such as G955W, G955F, G955FD etc.
Flash back to your original model firmware or you'll be hard bricked. I'll post updates about the hard brick part. There's some news developing about how to fix the hard brick.
Credits to @FatalONEM8 and @me2151 for figuring this out
~PSA by xdanilva
Click to expand...
Click to collapse
How to find out the Bootloader Version?
If it says 3 before your baseband number. Example from note 8 3BRA8. The note 8 already got patched.
Sent from my SM-G955U using Tapatalk
TheLastSidekick said:
Very scary. Prevents Comsey ODIN from working?
Source : Portal of XDA
https://www.xda-developers.com/samsung-galaxy-s8-note8-bootloader-odin/
Click to expand...
Click to collapse
Yep
Sent from my SM-G955U using Tapatalk
jaison thomas said:
I Have a doubt here. I am in a unlocked tmobile firmware on oreo beta. I was planning to flash unlocked firmware to it. so my question is
1) If i flashed unlocked US firmware G955U1 to G955U now, will it hardbrick after BLv3 update.
2)If i flashed now and updated to Blv3 after G955U1 will it be stuck to that firmware forever?
Thanks
Click to expand...
Click to collapse
1.) Yes
2.) You would get a non standard hardbrick. You would be stuck in Emergency Download Mode. You can't flash back to g955u even with standard Odin.
Sent from my SM-G955U using Tapatalk
sherlock5545 said:
So does it apply to the international model too? If I get a G955F from Germany and flash a XEU firmware, it will brick?
Click to expand...
Click to collapse
You can flash a different carrier firmware you can't flash a firmware from a different phone model.
Sent from my SM-G955U using Tapatalk
Another question please.
I have 955FD model and i have flashed DBT 955F firmware.
As i can see in sammobile there is 955FD firmware and it's the same as 955F.
I will be ok or not?
Στάλθηκε από το SM-G955F μου χρησιμοποιώντας Tapatalk
Does this only affect U.S. models or will this affect all models? Also, does this mean there will be no more rooting these devices or can you still root them as long as your phone didn't originally have v3? I.e., the modders can still build versions of the new modified firmware with v3 replaced with the old one? Or will those of us who want to keep our root have to just never ever update (through flashing)?
I'm sorry... this means we can't install custom firmware after this ? what i can do now to prevent this ? i have 955FD and not installed custom firmware or root yet... i want to be able to install custom firmware ... what can i do ?
Seems that Samsung reads XDA as well.... Targeted "security patch"... ?
Sent from my SM-G955W ??
What could be the reasons for anyone to flash another region firmware / ROM? Just curious.
Anyway im safe because i use G955F ROMs (my device is G955F) from the beginning and plan to do so in future, right?
Good Bye Sammy!!
@xdanilva
Thank you for letting us know.
This news made my mind up and just sold my S8+F!
samteeee said:
@xdanilva
Thank you for letting us know.
This news made my mind up and just sold my S8+F!
Click to expand...
Click to collapse
I would recommend getting a oneplus 5t as your next phone
xdanilva said:
I would recommend getting a oneplus 5t as your next phone
Click to expand...
Click to collapse
Although an excellent choice, but I bought a Pixel 2 XL from Google.