Database Users

Screen glitches/freezes (To do with magnetic case)

Hello from down-under ,
I've come to put forward a problem myself and a few others are having over at the Mtekk forums. I currently just purchased an I-Mate JasJam on Telstras' new NextG network and have been using it for about a week and a half. As this fantastic piece of equipment is a little on the expensive side, I wanted to make sure it was kept safe all the time, so I began to use (no matter how silly it made me look ) the I-Mate supplied Pouch, little did I know it did more damage then not using it...
After investigating over the last few days, It was concluded that the magnetic found in the supplied Pouch had some diverse effect on the switching on Landscape to Portrait mode when removing the JasJam from the Pouch to answer/make a call, play a game or send a text message; often resulting in a 'bugged' or 'glitched' screen, stuck between either Landscape or Portrait etc (I fixed by removing the JasJam and sliding out the Keyboard and back in).
After I few days I thought that this couldn't be right for a brand new machine and took my problem to the Internet in which I found others with the same problem. Since then I have stopped using the supplied Pouch and am now looking at purchasing the Krussel Orbit Pouch as a magnetic-less replacement (any users with one, I'd love your feedback). I am making this thread to see if any users of the XDA-Developers board have faced this issue and ask one further question:
1. Since I stopped using the Pouch I can only find one annoying trait left, whenever I switch the Screen back on from 'Standby' mode I seem to receive a small 'glitch' in the Today Screen if the device has been locked, if the device has been left unlocked the Screen can be switched on/off with no issue - does anyone else have this problem, I'm concerned that the magnetic pouch has caused some internal damage...
Thanks,
Elite_Gamer04

Hi, there is a bit more about this problem in the accessories thread, I noticed the magnet causing issues and wondered about internal damage as you did, even possibly causing the align issues, but a few people reported back they had been using the case from day 1 and while it affected the landscape/portrait, they had no align issues or any other problems, so I don't suspect that there is any internal damage occurring..I do wonder about your screen glitch but without actually seein it..I haven't a clue, also do you have a lot of today plugins?..could possibly be one of them is buggy..I'm not sure, but the case does certainly suck, I was immediately concerned with the magnet strength, off topic..but on my device if my thumb is a bit damp or any metal touches the aluminum bezel around the ear piece of the phone..the screen will flicker.

Thanks for your reply Chaotic, My device is in the same state as when it come out of the box, so this isn't a 3rd party issue. I have tried removing/adding the default Today Screen icons to see if it makes an issue to the 'glitching' of my screen when it on/off and it makes no difference, only thing I can see that makes it not happen *sometimes* is when the device is not locked.
Well thats one user without my issue, hoping someone will report it, or I'm going to get a replacement.
*If your testing to see if you have the same issue as me, simply hold your device in your hand (try both with it Locked and Unlocked) and push the top right-hand side button which should switch your screen off, press it again for it to come on. If you see a sort of 'glitch' of white on your Today Screen and then it fixes itself (I'm talkin 1-2 seconds) you have the same as me.*

Hi chaps,
I've used the magnetic pouch from day one with my UK T-Mobile Vario II and am still yet to see the landscape/portrait switching issue when removing the Vario II to answer a call.
I had a theory about this, and it's probably going to get shot down in flames for it's obviousness, but I'll mention it anyway... Could the problem be down to the machine being powered down (manually or automatically) while in Landscape mode... then when switching on automatically when a phone call is received, the phone tries to switch back to portrait mode but gets stuck?
I have road tested this theory on my own Vario II and have not seen the problem at all, but my ROM may handle things differently to yours? Apologies again if this suggestion is obvious.

elite_gamer04 said:
Thanks for your reply Chaotic, My device is in the same state as when it come out of the box, so this isn't a 3rd party issue. I have tried removing/adding the default Today Screen icons to see if it makes an issue to the 'glitching' of my screen when it on/off and it makes no difference, only thing I can see that makes it not happen *sometimes* is when the device is not locked.
Well thats one user without my issue, hoping someone will report it, or I'm going to get a replacement.
*If your testing to see if you have the same issue as me, simply hold your device in your hand (try both with it Locked and Unlocked) and push the top right-hand side button which should switch your screen off, press it again for it to come on. If you see a sort of 'glitch' of white on your Today Screen and then it fixes itself (I'm talkin 1-2 seconds) you have the same as me.*
Click to expand...
Click to collapse
I assume you are referring to the lock/unlock option found on the Today screen? I also see a short white screen delay when using this Today screen option.
I also see an even longer delay when using the password/pin lock option. Probably something to do with the locking program checking to see if the preset time delay for locking and requesting the password/pin has passed.
Disabling both options makes starting up a lot faster, although you may of course need these options enabled. I'm sure it's something that will be resolved by the manufacturer in time.

elite_gamer04, I hadn't ever used the lock on my device, so I enabled it just to test, and there wasn't any differences, I also wasn't sure of what the actual glitch was, but since you mentioned it I did some further investigating, I do notice a white screen when coming back from standby, but it lasts no longer than half a second..definitely not 2 seconds.
g00nerz, its all good, all info around here is appreciated, but there is definitely an issue with the case magnet, I don't have a single landscape/portrait issue unless I put it in the bundle case..I use a modded aluminum case at the moment..but if I switch back it happens, I'm pretty sure the words "bundle case" are in the title of the post with others with this issue if you want to check it out.
I have read where some people were discussing that they thought some had different screens..that could be why you haven't had this issue or maybe it is ROM related, but from what I understand its been a variety of brands with this issue...now that I think about it..I wonder if all the brands bundle cases are the same?
I think its Mike(I hope I got that right) that has tore one of these apart..few posts about it with pics on the forum he might know, but anyhow I wonder if theres actually a hardware switch that triggers the switch from portrait/landscape when the slide out kb is opened, and the magnet is affecting that..could also be it was revised on some models.
I'm just speculating/guessin on what might be causing it, I really haven't any solid info other than some people definitely have an issue with the case, including me.

I also see a short white screen delay when using this Today screen option
Click to expand...
Click to collapse
I <3 you hehe. Thank god its not just me . Yes I was referring to the 'Device Lock' and 'Device Unlock' function on the Today Screen. When it is Unlocked and I switch on/off the screen I see no 'lag' or 'white glitch' but with it on I see a small 1-2 sec lag. Anyways as you have confirmed it also I don't have to worry about returning mine and will get on with my new Krussel case I'm about to order.
Thanks
P.S If others are having this issue, or know of how to fix, don't hesitate to post.

Please consider that the use of wifi may drasticely slow down the device's power up. I do use the default case with the strong magnet, and when I power up my device with the wifi enabled it takes a while until he completely awake; the wifi plus the switch landscape => portrait (thanks HTC case) slow it down.
I am also experiencing the "auto answer" issue; from time to time when I put my device off its case it answer to the incoming phone call, but till now I was not sure that the case could be involved; are you sure about this? I tried to give some testing but I was not able to reproduce it; it only happen when it is not expected to happen

elite_gamer04 said:
Hello from down-under ,
As this fantastic piece of equipment ......the I-Mate supplied Pouch, little did I know it did more damage then not using it.........I switch the Screen back on from 'Standby' mode I seem to receive a small 'glitch' in the Today Screen if the device has been locked, ....
Click to expand...
Click to collapse
Hi elite_gamer04, As you had rightly mentioned this is really a fantastic device and no doubt about it.....like you I had the same problem when I bought it around 2 months back.
I was breaking my head as to why its happening, it looked for me as if the device hangs on and off...but did not notice keenly the instances when it happened as removing it out of the pouch was too normal a thing that did not hint me that it has something to do with the issue...But I was totally broken and disturbed and decided somehow I am going to get a replacement. I took it to the service centre and the guy there (very smart) as soon as I mentioned about the problem ( I went there thinking that it has something to do with the sliding mechanism) responded spontaneously taking the pouch opened the flap and took the magnet side over the screen and showed it to me....wow yes...its the pouch which was the culprit as we noticed the screen going crazy....Anyway I was relaxed but from that instance I kept aside the pouch that came with the pack and I am currently using a different one from the stores. Till now I have noticed no glitches and am happy I own a real amazing fast device.
About the other glitch you mentioned when the phone is locked yes I tried and it is there even for me but I dont think its a major issue for you to replace the device as its something to do with the screen refresh rate and memory which am sure would be fixed by new ROM upgrades in the days to come...but relax rest assured you own a fantastic device.
All the best

Thanks for posting this about the screen - I thought I was going nuts. I bought a replacement pouch that has a belt loop - so slightly more secure than the clip. But when i started using it - it always switches to landscape mode.
I'll have to find one without a magnet i guess!

Krusell Quick Mounter

Hi Guys,
I bought one of these and as "good" as it may seem, just warning you off, or at least giving you notice.
The magnet affects the phone and operates the screen by it's self.
Well, that's a little miss leading. What it does is I think, is tell the phone that you have opened the slide.
So depending on your settings, whenever you attach the phone it will either unlock it, open the dialer, read your sms messages or start pressing the soft keys.
Apart from the ridiculously poor delivery (1st class postage arrive 7 days after shipping. A parcel from US came quicker" ) that I don't know whether to blame on them or Royal Mail, I must of got the one adapter with no bloody adhesive on the back! Industrial sticky tape needed, that's if I decide I can live with the unlocking!
*mods* Really sorry, I didn't notice the "accessories" thread. I only hang out in this one, I've only just noticed it.

Sorry to hear you are not very happy with this, i've had one for a while and i reckon its one of the best i've had. as well as being small and discreet the magnet holds the pda even when driving down dirt tracks and over speed bumps.
The magnet does occasionally set off the quick list but it has already been mentioned on this forum that it is activated by magnet it just depends where you put the adapter

i dont know about you guys but im keeping magnets well away from my device.

kerrance76 said:
The magnet does occasionally set off the quick list but it has already been mentioned on this forum that it is activated by magnet it just depends where you put the adapter
Click to expand...
Click to collapse
Do you have a Dual then? Where is your strip to attached the magnet?

After a bit of experimentation, if you place the strip horizontal just underneath the camera (in the center) then the magnet wont set off the phone!
Now I've fixed it with my own tape I'm really happy with it!

i've got mine right in the middle, covering the orange logo, after playi g with it a bit last night it seems to depend a lot on how quickly you move the dual towards the magnet and whether you go staraight towards it or come in from an angle. one thing i havent tried is disabling the quick menu, will give it a go later as i never use it anyway

[Q] Bottom half of screen not responding to touch

I had an exam and removed the battery for my phone for the duration. When I put it back in, the bottom half of my screen stopped responding to touch. The screen itself is unharmed and uncracked. The S Pen still works flawlessly. However, the bottom half of the screen ("above" about 890 pixels on the Y axis) simply does not respond to normal touch. In addition, the volume buttons no longer change my notification volume. They still work for music volume, just not touch volume. When I long-press the power button, the power menu sits at the very top of the screen and has black covering the whole bottom of the screen for some reason. When I receive calls, the buttons are right at the top. Because of this, this seems to be some sort of software issue, but I have no idea what would cause it. Has anyone with more experience with Samsung devices seen this before? Multiple restarts and battery pulls have done nothing.
EDIT: In case anyone else encounters this, it had something to do with my case. I think my phone thought it was a smart cover for some reason. I enabled and disabled smart cover and then removed and replaced the case. It's working fine now.
EDIT: Never mind, that was a coincidence. The issue is DEFINITELY that the phone thinks it has a smart cover on it, but it has nothing to do with my own case.

gilros said:
I had an exam and removed the battery for my phone for the duration. When I put it back in, the bottom half of my screen stopped responding to touch. The screen itself is unharmed and uncracked. The S Pen still works flawlessly. However, the bottom half of the screen ("above" about 890 pixels on the Y axis) simply does not respond to normal touch. In addition, the volume buttons no longer change my notification volume. They still work for music volume, just not touch volume. When I long-press the power button, the power menu sits at the very top of the screen and has black covering the whole bottom of the screen for some reason. When I receive calls, the buttons are right at the top. Because of this, this seems to be some sort of software issue, but I have no idea what would cause it. Has anyone with more experience with Samsung devices seen this before? Multiple restarts and battery pulls have done nothing.
EDIT: In case anyone else encounters this, it had something to do with my case. I think my phone thought it was a smart cover for some reason. I enabled and disabled smart cover and then removed and replaced the case. It's working fine now.
Click to expand...
Click to collapse
I've had much the same problem. While the S-Pen was able to make selections that the touchscreen wouldn't, other S-Pen functions such as Air Command and being able to start an Action Memo wouldn't work. Waiting for an extended period of time (like 24 hours) and all of a sudden it started working again. However, while I was waiting, rebooting - even performing a factory reset - didn't' fix it! I just now rebooted it and it's not working again, and it's not in a case.
Where do you find the option to enable and disable Smart Cover? On the Note 2, it was (apparently) under Security / Device Administrators, but I don't find it there. The only option I could find was in Accessories / S View Cover / Automatic Unlock but changing this setting (including rebooting between settings) hasn't solved it.

hiroller173 said:
I've had much the same problem. While the S-Pen was able to make selections that the touchscreen wouldn't, other S-Pen functions such as Air Command and being able to start an Action Memo wouldn't work. Waiting for an extended period of time (like 24 hours) and all of a sudden it started working again. However, while I was waiting, rebooting - even performing a factory reset - didn't' fix it! I just now rebooted it and it's not working again, and it's not in a case.
Where do you find the option to enable and disable Smart Cover? On the Note 2, it was (apparently) under Security / Device Administrators, but I don't find it there. The only option I could find was in Accessories / S View Cover / Automatic Unlock but changing this setting (including rebooting between settings) hasn't solved it.
Click to expand...
Click to collapse
Sadly, it was just coincidence that it randomly stopped happening when I enabled and disabled the auto-unlock feature with Smart Cover. My phone started doing it again and I've been unable to repair it. I went to Verizon and they wiped my phone before telling me I'll just have to get it replaced with a refurbished one. Very frustrated. Shame there aren't any AOSP based ROMs yet (like CyanogenMod)-- they'd probably fix it since the cover thing wouldn't be a feature.

Bump.
Anyone know of the APK which would handle S View Cover behavior? If we were to disable that I imagine the problem would go away. I'm still not totally sure of the origin of the issue, but it seems to come from a combination of hardware and software problems. The hardware sensor thinks I have the case on, so the software changes things around. When I call people, I get the S View Cover style call screen. If I change the toggle in accessory settings to automatically unlock the phone when opening the cover, hitting the lock button automatically unlocks the phone as though I had no lockscreen. However, when this is disabled, the lock screen is NOT in the S View Cover form-- it looks stock. This confuses me.
Any ideas from anyone else getting the issue?

Same experience
Just to add my experience as I go. This afternoon I received an error that my SMS data could not be downloaded. Upon sliding down the notifications I was unable to control much. I ripped the majority of my hair out over this.... My pen works flawlessly everywhere though. I eventually discovered it works fine on the bottom half as you described. I have to run to some appointments, but I'll touch back after I try a few things.
gilros said:
Bump.
Anyone know of the APK which would handle S View Cover behavior? If we were to disable that I imagine the problem would go away. I'm still not totally sure of the origin of the issue, but it seems to come from a combination of hardware and software problems. The hardware sensor thinks I have the case on, so the software changes things around. When I call people, I get the S View Cover style call screen. If I change the toggle in accessory settings to automatically unlock the phone when opening the cover, hitting the lock button automatically unlocks the phone as though I had no lockscreen. However, when this is disabled, the lock screen is NOT in the S View Cover form-- it looks stock. This confuses me.
Any ideas from anyone else getting the issue?
Click to expand...
Click to collapse

gilros said:
Any ideas from anyone else getting the issue?
Click to expand...
Click to collapse
Maybe it was caused by the battery insertion or backplate replacement. Perhaps too much pressure or an uneven pressure damaged the circuitry, which is now loose and causing the intermittent error.
Or perhaps it was a static discharge from the battery.
Both cases seem to me to be warrenty items.
SGH-I717/SM-N900V/XDA Premium

Uh oh... I'm rooted and on Verizon. There isn't a way to unroot yet is there?
Frank Westlake said:
Maybe it was caused by the battery insertion or backplate replacement. Perhaps too much pressure or an uneven pressure damaged the circuitry, which is now loose and causing the intermittent error.
Or perhaps it was a static discharge from the battery.
Both cases seem to me to be warrenty items.
SGH-I717/SM-N900V/XDA Premium
Click to expand...
Click to collapse

thematt917 said:
Uh oh... I'm rooted and on Verizon. There isn't a way to unroot yet is there?
Click to expand...
Click to collapse
I thought the only thing necessary to unroot is to flash the stock ROM. The download is linked from the de la Vega post.
SGH-I717/SM-N900V/XDA Premium

I realized had about 3 days left on my Best Buy (elite+) 45 day return. Swapped for a brand new one :good: with no issues!
Frank Westlake said:
I thought the only thing necessary to unroot is to flash the stock ROM. The download is linked from the de la Vega post.
SGH-I717/SM-N900V/XDA Premium
Click to expand...
Click to collapse

gilros said:
I had an exam and removed the battery for my phone for the duration. When I put it back in, the bottom half of my screen stopped responding to touch. The screen itself is unharmed and uncracked. The S Pen still works flawlessly. However, the bottom half of the screen ("above" about 890 pixels on the Y axis) simply does not respond to normal touch. In addition, the volume buttons no longer change my notification volume. They still work for music volume, just not touch volume. When I long-press the power button, the power menu sits at the very top of the screen and has black covering the whole bottom of the screen for some reason. When I receive calls, the buttons are right at the top. Because of this, this seems to be some sort of software issue, but I have no idea what would cause it. Has anyone with more experience with Samsung devices seen this before? Multiple restarts and battery pulls have done nothing.
EDIT: In case anyone else encounters this, it had something to do with my case. I think my phone thought it was a smart cover for some reason. I enabled and disabled smart cover and then removed and replaced the case. It's working fine now.
EDIT: Never mind, that was a coincidence. The issue is DEFINITELY that the phone thinks it has a smart cover on it, but it has nothing to do with my own case.
Click to expand...
Click to collapse
I have the same issue. I ve been trying to understand why this happened but no luck. I tried everything from updating to reseting. I first noticed it when i took the battery out as well. but the problem kinda fixed it self so i thought the phone has a spaz or something. but when i removed the battery again it happened again.
I took it to the people i bought it from and all they can say is cause there were a couple of scratches on the side of the case that it may not fall under warranty...
i was pretty angry cause its only two months old and the warranty is for a year. and the problem started happening while i was overseas so its been like that for almost a month. hopefully the sales guy is just talk cause its not up to him its just his "opinion" as he put it.
Did they explain to you why this happened? or if this is a common issue?
Hope your new phone is ok

I have this problem intermittently also. Exactly as described above.
Sent from my SM-N900V using Tapatalk

any updates on this? im having the same problem now with my tmobile version. it fell facedown and the extended battery i had it in fell out. im going to try putting an aosp rom on it when i get home from work.

Timely post! I gave up. Verizon sending me a warranty replacement to arrive today.
Sent from my SM-N900V using Tapatalk

I have the solution!
Please. Let me know it worked for you, so people that doesn´t like to post and only read can solve this problem.
The Problem:
The half bottom screen is not working. Including the back button, the option button and the home buttom. they only work if you use the S Pen. Except for the home button. The volumes button do not work either. So the Solution is this..
take off the battery while the phone is on. YES, do not turn off the telephone and the take off the battery. Just take off the battery while the phone is on. It should work. I hope this is the solution.
One more thing. Do not allow your phone to dried up the battery completly so this wont happen again. It is better to turn it off before it dries up.!
Please let me know if it worked for you! I will let you know if this problems start again and if was only an coincidence.Hopes it not!
This tough me a good lesson! never buy a Phone from not trusted retailer, it is better to pay the full price a good store. The people that sold me the phone has a crappy warrraty like if the screen it cellphone is complete off they wont allow me to use the warranty and my phone had faulty battery conecction so it was off. then I paid 100 dollars to be repaired then this problem.
Ok, guys please let us know if it worked so people start saving their phone

Just happened to mine as well
Hard reset didn't work, on the phone with support trying to request a replacement now.

Finally Solved!
Hi
I had same problem
I did everything u said like:
mega wipe and changing rom
custom roms
taking out battery when it's on ( I Did this but I don't know It had any effects on my phone or not!)
taking out external card
But I still Had the Problem
Solution:
But I had a flip cover and I separated that from phone and thanks God,surprisingly It's Fixed and it works like a charm!!! after that I used my original cover and there is no problem till now.
Good Luck

Had the same problem of touch not working.
I tried everything as suggested by the members but my Note 3 is still not working right.Touch not responding all of a sudden in the bottom part of screen after i removed the battery for sim change. Please suggest something.

luas_13 said:
I tried everything as suggested by the members but my Note 3 is still not working right.Touch not responding all of a sudden in the bottom part of screen after i removed the battery for sim change. Please suggest something.
Click to expand...
Click to collapse
I haven't gone back to refresh my memory but it seems to me that all these occurrances were caused by removing the back cover. Try removing it and the battery and firmly press on every spot with your thumb. First place the device face down on table padded with a single layer of a blanket. Remove the SIM and SD card and firmly reinsert. Press the back cover on and try it, then return it for warranty if it is still bad.
Frank

I also was faced with this issue today at the start of my morning BUT I FOUND A SOLUTION
I have a Sprint Galaxy Note 3 N900P Stock ROM/ no root, no mods/custom kernels/boots etc...
My device side effects were
The bottom half of my screen was not responding to my fingers,
When you press the Power Button, The options appeared on the top section of the screen instead of being the center
When I press the volume up/down keys, The volume would raise and lower, But the screen that pops up and shows you the volume had increased or decreased didnt show up
Only way to use device was with S Pen
Basically all the issues everyone listed, I had them.
Now my solution; if the issue is a hardware issue.
After dissembling my phone to see what each hardware part of the phone controls, I've come to the conclusion that there was an issue with my USB Dock Connector section of the phone. I uploaded a image pointing which connector controls it. I tried to just wipe and clean it up a bit because mines had some residue on the underneath of it. Then I plugged it back in and it started back to work %100. After I tried restarting it a few times and shaking the device up, it still works; Although I am still going to order a replacement USB Charging Port with flex cable just in case.

fixed.
This is the definitely the hardware problem.
most likely happen if u ever dropped ur phone to the ground ----------- and reboot ur phone some what later time. (can be days or months).
Temp Solution to this problem is...
face down your phone to the flat floor or a table, gently hit the back, strong enough to shock the devide, but not that strong to crack your screen.
one other simple way is to drop your phone to the floor, screen is facing down, from about 30 cm high from the floor.
"simply, hit your device like you used to fix your ur old TV. "
that is just a temp. GL.

Case that turns screen on automatically

I have this case that somehow, when opened, turns the screen on automatically.
This is the case: STILGUT - ULTRASLIM CASE MADE FROM LEATHER FOR LG G2 (sorry, can't post links, new user restriction, Google it)
I thought it was an LG G2 feature but then I bought another cheaper case and with the new case the screen doesn't turn on and off automatically when the case is opened or closed.
I don't understand what it could be - how does this case work?

There's a small magnet on the inside of the flap of the case, this activates a sensor in the phone to shut the screen off when closed

meangreenie said:
There's a small magnet on the inside of the flap of the case, this activates a sensor in the phone to shut the screen off when closed
Click to expand...
Click to collapse
Really? That's awesome.
I find it weird that I couldn't find this specification on their website. It was a huge surprise when I started using it and never knew why, and it was also a huge disappointment when the new one didn't work the same. Damn.
Anyone knows of any other cases that can do this? I think this feature is very, very helpful and again, like I said, I find it odd it's not one of the key selling points of the case on their website.

Screen turning on and off by itself

Hi,
My Nexus 6P started to act weirdly 3 days ago. Sometimes when I use it the screen turn off just by moving it a little bit. When it do it it it's only after a few second otherwise it works totally fine. Sometimes I use it in my hand and just putting it in my table or in any flat surfaces turn the screen off and grabing the phone again turn the screen on again... Is there a bad contact or a broken power button ? It feels like shaking the phone a little bit often help. I'm on the latest official Oreo, I have no special app installed and Ambiant Display and this kind of kinds are all disabled, I can only turn the screen on by power button.I have no boot-loop or problems like that. And it seems like it never turn on and off in my pocket.
Do you have an idea what could be the problem ?

Sebacestmoi said:
Hi,
My Nexus 6P started to act weirdly 3 days ago. Sometimes when I use it the screen turn off just by moving it a little bit. When it do it it it's only after a few second otherwise it works totally fine. Sometimes I use it in my hand and just putting it in my table or in any flat surfaces turn the screen off and grabing the phone again turn the screen on again... Is there a bad contact or a broken power button ? It feels like shaking the phone a little bit often help. I'm on the latest official Oreo, I have no special app installed and Ambiant Display and this kind of kinds are all disabled, I can only turn the screen on by power button.I have no boot-loop or problems like that. And it seems like it never turn on and off in my pocket. Do you have an idea what could be the problem ?
Click to expand...
Click to collapse
I don't want to be an alarmist, but it doesn't sound good. Check your battery capacity with the Accubattery app. Just in case I would make sure your photos are being auto-backed up to the cloud and do a full backup of the phone, storing it on your PC. Enable usb debugging and allow oem unlock under dev settings. If your screen does die completely, you won't be able to get into your phone to do this. If you enable usb debugging, at least you will be able to adb pull any files you need off the phone. Check that battery health.

v12xke said:
I don't want to be an alarmist, but it doesn't sound good. Check your battery capacity with the Accubattery app. Just in case I would make sure your photos are being auto-backed up to the cloud and do a full backup of the phone, storing it on your PC. Enable usb debugging and allow oem unlock under dev settings. If your screen does die completely, you won't be able to get into your phone to do this. If you enable usb debugging, at least you will be able to adb pull any files you need off the phone. Check that battery health.
Click to expand...
Click to collapse
Yeah thank you buddy ! Don't worry, I do a full TWRP backup of my phone every week. Battery is working great, I don't have the below X% shuting down bug, no bootloop bug and I can do a whole day without charging (except if I play on my phone, which is normal). I'm thinking more about a bad contact of the screen connector or the power button.

[FONT=&quot]I found that it was the magnetic sensor used for the flip cover that cause this Strange behavior. I have a pouch that close with a magnet and it randomly interact with the phone. Is it possible to disable the lock and unlocking by magnet sensor?[/FONT]

Sebacestmoi said:
[FONT=&quot]I found that it was the magnetic sensor used for the flip cover that cause this Strange behavior. I have a pouch that close with a magnet and it randomly interact with the phone. Is it possible to disable the lock and unlocking by magnet sensor?[/FONT]
Click to expand...
Click to collapse
The N6P has a magnetic sensor to turn off the screen with Folio case. My Nexus 7 has this feature and I can use my kernel (EX Kernel Manager) to enable/disable it. It is an option to toggle on or off under Settings>>Miscellaneous. That setting is not there for the N6P, but shouldn't be that difficult to implement if you are using EX kernel. I'd ask over in the dedicated EX Kernel thread. Maybe Flar2 can hook you up.

v12xke said:
The N6P has a magnetic sensor to turn off the screen with Folio case. My Nexus 7 has this feature and I can use my kernel (EX Kernel Manager) to enable/disable it. It is an option to toggle on or off under Settings>>Miscellaneous. That setting is not there for the N6P, but shouldn't be that difficult to implement if you are using EX kernel. I'd ask over in the dedicated EX Kernel thread. Maybe Flar2 can hook you up.
Click to expand...
Click to collapse
Thank you, I will ask !