My power button won't work on X8... Please help...
Take it to a service point/service center after you reflashed it.
flash it with seus, it doesnt need the power button, just the back. ( i hope you know how to flash your phone with seus, if you dont, install a seus, and follow the instructions, everything is written there).
if you cant flash it because flash mode doesnt work, that is sucks, you need to bring your phone to service, but if you have a custom rom on your phone , start to pray, that they repair it to you for free.
[email protected] said:
Take it to a service point/service center after you reflashed it.
Click to expand...
Click to collapse
+1 ...realy ...don't baypass flash step...
Hi. I have bought used P8 lite and im wondering if there is any way to check if bootloader was unlocked ? I mean seller could just lock the bootloader for sell and i want to check is the warranty still working. Any ideas ?
Shavo6 said:
Hi. I have bought used P8 lite and im wondering if there is any way to check if bootloader was unlocked ? I mean seller could just lock the bootloader for sell and i want to check is the warranty still working. Any ideas ?
Click to expand...
Click to collapse
Use hi care app to check the warranty status.
You can boot into fastboot & rescue mode (turn it off, press power + vol - button (i think)) and at the bottom of the screen it should say either:
Unlocked
or
Locked
I have unlock the bootloader of my zte axon 7 A2017U and during the process it was bricked
now i am in EDL mode, bootloader unlocked, the phone won't turn on, no rom, idk if there is a recovery, fastboot & adb won't recognize the phone, from what i have understand i need to install qualcomm drivers and idk how to do that pls help!!
i just want to get to "brand new phone" state
thank you for future help :fingers-crossed::fingers-crossed:
Just press and hold power till turns back on
DrakenFX said:
Just press and hold power till turns back on
Click to expand...
Click to collapse
The phone dosn't turn on i have pressed for over a minuite now.. again there is no rom ,maybe no recovery and need to flash qualcomm's drivers
erano067 said:
I have unlock the bootloader of my zte axon 7 A2017U and during the process it was bricked
now i am in EDL mode, bootloader unlocked, the phone won't turn on, no rom, idk if there is a recovery, fastboot & adb won't recognize the phone, from what i have understand i need to install qualcomm drivers and idk how to do that pls help!!
i just want to get to "brand new phone" state
thank you for future help :fingers-crossed::fingers-crossed:
Click to expand...
Click to collapse
Can't you use this http://forum.xda-developers.com/axon-7/development/wip-axon-7-root-bootloader-unlokced-t3441204 to get TWRP running and then use http://forum.xda-developers.com/axon-7/development/rom-guide-updates-to-stock-files-via-t3469484 to get the rom back?
tabletalker7 said:
Can't you use this http://forum.xda-developers.com/axon-7/development/wip-axon-7-root-bootloader-unlokced-t3441204 to get TWRP running and then use http://forum.xda-developers.com/axon-7/development/rom-guide-updates-to-stock-files-via-t3469484 to get the rom back?
Click to expand...
Click to collapse
I have tried that, and it won't go to twrp, although this is the result from cmd:
D:\Downloads\New folder>axon7root.exe -p COM3 -b -r
Copyright @tenfar [email protected]
Version 1.10
Sengding the horse
Waiting the horse to alive
boot = D:\Downloads\New folder\boot.img
recovery = D:\Downloads\New folder\recovery.img
Connected to device, rooting
Writing boot.img success
Writing recovery.img success
Device Rooted!
Hold Volume Up + Power key to reboot to the twrp recovery
Hold Power key to reboot to the system,but twrp will be restore to stock.
So recommanded to boot into twrp first
Program close countdown:10 9 8 7 6 5 4 3 2 1
erano067 said:
I have tried that, and it won't go to twrp, although this is the result from cmd:
D:\Downloads\New folder>axon7root.exe -p COM3 -b -r
Copyright @tenfar [email protected]
Version 1.10
Sengding the horse
Waiting the horse to alive
boot = D:\Downloads\New folder\boot.img
recovery = D:\Downloads\New folder\recovery.img
Connected to device, rooting
Writing boot.img success
Writing recovery.img success
Device Rooted!
Hold Volume Up + Power key to reboot to the twrp recovery
Hold Power key to reboot to the system,but twrp will be restore to stock.
So recommanded to boot into twrp first
Program close countdown:10 9 8 7 6 5 4 3 2 1
Click to expand...
Click to collapse
Hold on there,
- When you unplug your device and press & hold Power it does NOT turn on? and still just black screen?
- Only Turns on straight to EDL when you plug it in using your PC/Laptop
if both are correct you better off, doing a RMA, why that's my final answer?, cuz i had the same problem and couldn't fix it and there's NO tool yet to fix for this type of brick.
Sorry pal,
DrakenFX said:
Hold on there,
- When you unplug your device and press & hold Power it does NOT turn on? and still just black screen?
- Only Turns on straight to EDL when you plug it in using your PC/Laptop
if both are correct you better off, doing a RMA, why that's my final answer?, cuz i had the same problem and couldn't fix it and there's NO tool yet to fix for this type of brick.
Sorry pal,
Click to expand...
Click to collapse
It have a black screen all the time(pluged to laptop,pressed power button no matter what i do) even no vibration, pls think of something else!:fingers-crossed::fingers-crossed:
erano067 said:
It have a black screen all the time(pluged to laptop,pressed power button no matter what i do) even no vibration, pls think of something else!:fingers-crossed::fingers-crossed:
Click to expand...
Click to collapse
sorry pal, like i said before you need to send to ZTE for repair (RMA) you have ZTE Passport Warranty , do a RMA is the only way for now to get it fix.
erano067 said:
It have a black screen all the time(pluged to laptop,pressed power button no matter what i do) even no vibration, pls think of something else!:fingers-crossed::fingers-crossed:
Click to expand...
Click to collapse
Same thing happened to me a little over a month ago - must send it back to ZTE. RMA is the only way
tabletalker7 said:
Same thing happened to me a little over a month ago - must send it back to ZTE. RMA is the only way
Click to expand...
Click to collapse
Did they charge you for it? and if so how much?
erano067 said:
Did they charge you for it? and if so how much?
Click to expand...
Click to collapse
I made sure I had my backups restored (stock boot and stock recovery from axon7backup) and I only paid ten bucks for an upgrade to express return shipping
erano067 said:
I have tried that, and it won't go to twrp, although this is the result from cmd:
D:\Downloads\New folder>axon7root.exe -p COM3 -b -r
Copyright @tenfar [email protected]
Version 1.10
Sengding the horse
Waiting the horse to alive
boot = D:\Downloads\New folder\boot.img
recovery = D:\Downloads\New folder\recovery.img
Connected to device, rooting
Writing boot.img success
Writing recovery.img success
Device Rooted!
Hold Volume Up + Power key to reboot to the twrp recovery
Hold Power key to reboot to the system,but twrp will be restore to stock.
So recommanded to boot into twrp first
Program close countdown:10 9 8 7 6 5 4 3 2 1
Click to expand...
Click to collapse
Sound like the bootloader is hosed. And i am going to assume you have the A2017U (US version) since u still end up in EDL and not DFU? How did you unlock you BL or how did it fail?
peramikic said:
Sound like the bootloader is hosed. And i am going to assume you have the A2017U (US version) since u still end up in EDL and not DFU? How did you unlock you BL or how did it fail?
Click to expand...
Click to collapse
I ended up in a black screen and the phone won't turn on, i assume i'm in EDL mode, i was able to unlock the bootloader soccessfully but after messing around a little too mouch it has come to this state..
erano067 said:
I ended up in a black screen and the phone won't turn on, i assume i'm in EDL mode, i was able to unlock the bootloader soccessfully but after messing around a little too mouch it has come to this state..
Click to expand...
Click to collapse
you unlocked the bootloader? I doubt you can make a RMA claim now
tabletalker7 said:
you unlocked the bootloader? I doubt you can make a RMA claim now
Click to expand...
Click to collapse
if he did an UNOFFICIAL Unlock he can, there is no way for them to check if bootloader was unlock...specially if the device is in the condition it is now.
DrakenFX said:
if he did an UNOFFICIAL Unlock he can, there is no way for them to check if bootloader was unlock...specially if the device is in the condition it is now.
Click to expand...
Click to collapse
You know ...... They never figured out what happened to mine - after two days they gave up and replaced the phone.
hold down power and volume down button at same time for a few seconds...
Guys this happened to me and I called ZTE and made a repair claim I did not unlock bootloader so I hope I'm ok and they can replace it
Jocutz1987 said:
Guys this happened to me and I called ZTE and made a repair claim I did not unlock bootloader so I hope I'm ok and they can replace it
Click to expand...
Click to collapse
It would be beneficial to know what steps lead up to this failure.
I'm considering importing this phone and to RMA could be quiet costly (delivery costs).
tmxda said:
It would be beneficial to know what steps lead up to this failure.
I'm considering importing this phone and to RMA could be quiet costly (delivery costs).
Click to expand...
Click to collapse
I said there was a failure when it was updating software I got soft brick but no unlock bootloader they pay for shipping read the warranty passport 2.0 when you have a chance but short info it has to meet warranty criteria and if it's repairs you have to pay for repair cost if you Dont want to pay for repair cost they will send it back the way they received it. It take about two weeks for the process and they're in Dallas tx.
Hi, my screen doesn't seems to work. I wanted to downgrade from Nougat, so i flashed oeminfo and then rebooted and installed b130 l-21 firmware. Installation reached 100% but then it tell an error and i there was just a button to reboot, so i pressed it and after that, black screen. Charging led not working too. By the way, i don't know why, but my phone is booting only in fastboot mode, even if i force reboot by holding power button, the device is rebooting in fastboot. I re-unlocked the bootloader and then tried to flash b160, but it seems like it din't flash nothing, because when i type "fastboot getvar rescue_phoneinfo" it says that i'm on B130. Any idea?
Edit: DC-Phoenix unlocker says that "battery state: 0" is this ok?
xDavi01 said:
Hi, my screen doesn't seems to work. I wanted to downgrade from Nougat, so i flashed oeminfo and then rebooted and installed b130 l-21 firmware. Installation reached 100% but then it tell an error and i there was just a button to reboot, so i pressed it and after that, black screen. Charging led not working too. By the way, i don't know why, but my phone is booting only in fastboot mode, even if i force reboot by holding power button, the device is rebooting in fastboot. I re-unlocked the bootloader and then tried to flash b160, but it seems like it din't flash nothing, because when i type "fastboot getvar rescue_phoneinfo" it says that i'm on B130. Any idea?
Edit: DC-Phoenix unlocker says that "battery state: 0" is this ok?
Click to expand...
Click to collapse
Disconnect the cable, after Dload b130, b160 or b.... then press volume + and power.
No longer hold power when the screen starts.
Recovery huawei wipe factory rest and wipe cache reboot.
Chisetdel31260 said:
Disconnect the cable, after Dload b130, b160 or b.... then press volume + and power.
No longer hold power when the screen starts.
Recovery huawei wipe factory rest and wipe cache reboot.
Click to expand...
Click to collapse
Thank you, but if i try to install with 3 button method i can't see if it's actually installing because the screen is black.
xDavi01 said:
Thank you, but if i try to install with 3 button method i can't see if it's actually installing because the screen is black.
Click to expand...
Click to collapse
How old is your phone and we're you from ?
Kcetin20 said:
How old is your phone and we're you from ?
Click to expand...
Click to collapse
I bought it about 1 month ago, and i'm from Italy.
xDavi01 said:
I bought it about 1 month ago, and i'm from Italy.
Click to expand...
Click to collapse
http://consumer.huawei.com/minisite/it/vipservice/index.html
Call huawei and ask for Huawei VIP they will pickup the phone and return it back.
Since you're under warranty its for free. i just sended my phone today was also black screen.
Kcetin20 said:
http://consumer.huawei.com/minisite/it/vipservice/index.html
Call huawei and ask for Huawei VIP they will pickup the phone and return it back.
Since you're under warranty its for free. i just sended my phone today was also black screen.
Click to expand...
Click to collapse
Even if i have unlocked bootloader? Or do i need to relock it?
xDavi01 said:
Even if i have unlocked bootloader? Or do i need to relock it?
Click to expand...
Click to collapse
push stock recovery and relock it and call them
Kcetin20 said:
push stock recovery and relock it and call them
Click to expand...
Click to collapse
Thank you, i'll try to call this service and then i'll let you know how's gone
xDavi01 said:
Thank you, i'll try to call this service and then i'll let you know how's gone
Click to expand...
Click to collapse
You're wellcome good luck.
xDavi01 said:
Thank you, i'll try to call this service and then i'll let you know how's gone
Click to expand...
Click to collapse
Any news from your device ? My device is repaired no funds or payments...monday i will receive it
Kcetin20 said:
Any news from your device ? My device is repaired no funds or payments...monday i will receive it
Click to expand...
Click to collapse
Oh, yea, i finally got my device working again without using warranty, but i had to pay 15€ for the DC-Phoenix flash service. With that service i could flash any file that is into an .app instead of just flash system, boot and recovery with classic fastboot method. So i downloaded b161, flashed it and my screen came back again!
I'm returning a my tablet which is still under warranty and looking for a way to re-lock the bootloader. All the tutos I find are for unlocking it. Does anyone now the procedure for re-locking it?
Thanks
korr.gm said:
I'm returning a my tablet which is still under warranty and looking for a way to re-lock the bootloader. All the tutos I find are for unlocking it. Does anyone now the procedure for re-locking it?
Thanks
Click to expand...
Click to collapse
That is because you re-lock it the same way you unlock it. Be sure to flash the latest stock ROM via Odin before re-locking it. Then, with the tablet off, and the USB cable plugged into the PC only, while holding both vol up and down and plug the cable into the tablet.. When the screen appears, release both buttons and then long press the vol up and you'll get the screen to re-lock.