Hello everyone,
I have problem with my LG G2. I tried to install new rom to my phone and I didnt check all steps and its stoping at LG logo.
I tried to install this rom: https://forum.xda-developers.com/lg-g2/development/rom-cloudyg2-t3006744.
After installing the phone stop to work and I tried back to my previous rom which is: https://forum.xda-developers.com/showthread.php?t=2783192.
I wiped all and pushed it by adb sideload, it install normal but after that is same problem like with 3.3 rom.
If there is thread with same problem I am sorry :|
Hope someone could help. Thanks.
I solved problem by myself I pushed KK_Baseband_D802.zip by adb sideload from this thread https://forum.xda-developers.com/showthread.php?t=2680745 and it works .
Related
I tried to load old stock of LG E400, however, it gave me some error at final stages. Now, the phone is working except two issues:
1: The USB is not working at all, neither for charging not for data transfer i.e. the phone is not detected on computer.
2: The graphics are not good as it should be. I guess its operating at 8bits or so.
I tried Voume Down, Home key and power, but no help by resetting it to default.
I tried Volume Up, Home and power, but i don't know how to proceed once it shows notice screen. I am not sure how to proceed or restore a new stock ROM or load a custom ROM since the recovery is not installed nor the device is rooted.
The current ROM is V10b.
Please help!
amjadakmal said:
I tried to load old stock of LG E400, however, it gave me some error at final stages. Now, the phone is working except two issues:
1: The USB is not working at all, neither for charging not for data transfer i.e. the phone is not detected on computer.
2: The graphics are not good as it should be. I guess its operating at 8bits or so.
I tried Voume Down, Home key and power, but no help by resetting it to default.
I tried Volume Up, Home and power, but i don't know how to proceed once it shows notice screen. I am not sure how to proceed or restore a new stock ROM or load a custom ROM since the recovery is not installed nor the device is rooted.
The current ROM is V10b.
Please help!
Click to expand...
Click to collapse
graphic error is sometimes because of firmware incompatibility with new released phone if im not mistaken
about your phone not detected
have you ever tried to uninstall the driver then reinstall and make sure that you enable usb debbuging
and if the debbuging works then i suggest you upgrade to other latest firmware because v10b is too old
Thank you for replying. I did tried uninstalling and installing, it did not help. However, I tried flashing 10E and it helped in fixing the USB issues. However, my graphics still not fixed, even i tried installing a custom ROM but still graphics are not fixed
EDIT: V10F fixed the graphics problem in the stock ROM however, in the custom Rom, its still not working. Trying V10H stockrom and trying to install the custom ROM to verify.
jsarunotres said:
graphic error is sometimes because of firmware incompatibility with new released phone if im not mistaken
about your phone not detected
have you ever tried to uninstall the driver then reinstall and make sure that you enable usb debbuging
and if the debbuging works then i suggest you upgrade to other latest firmware because v10b is too old
Click to expand...
Click to collapse
The spectrum and other rooting hacks for LG - E400 only works upto V10C stock rom.
amjadakmal said:
The spectrum and other rooting hacks for LG - E400 only works upto V10C stock rom.
Click to expand...
Click to collapse
you should trying with v10n t-mobile
htn2205 said:
you should trying with v10n t-mobile
Click to expand...
Click to collapse
May I get the link for the v10n, please.
amjadakmal said:
The spectrum and other rooting hacks for LG - E400 only works upto V10C stock rom.
Click to expand...
Click to collapse
I have LG-E400f-V10f as a baseband version, and I rooted successfully with spectrum.
@amjadakmal, what error did you receive in the final stage of KDZ-Flasher?
What version of KDZ-Flasher are you using?
Hello, Xda friends.
I'm a new user of LG G2 and I've been using the cloudyflex ROM for about 2 months but today really need your help to fix my lg g2, I don't know what is going on with it and I tried everything I learn't to fix it but didn't work out. Hope you guys can help me. :crying:
On june 17th I flashed on my LG G2 the cloudyFLEX 2.4 and enjoyed a lot, but I also wanted to try the CyanogemMOD to choose which one I would preffer. I created a backup , flashed the cyanogemMOD and Gapps. It worked well but I decided to restore the Cloudyflex 2.4 because I like all the features like multitasking and the 4K camera.After restoring I restarted the phone and it worked really well. Then I turned it off and went to bed.
In the morning I turned it on to listen to music while going to university and I wasn't working anymore, it says "com.android.systemui stopped" I'm not sure if it says like this in the phone because I'm Brazillian and my phone is in Portuguese.
I tried to hardreset it but it simply doesn't work. When I do that sequence to start the hard reset the mobile restarts instead of getting in this mode.
So I realized i could get in the download mode, so I tried to upgrade the mobile but when it finishes the problem continues.
I also tried to to the Offline update but when I press "normal web upgrade test" and "upgrade start" I receive a message saying " Install CSMG B2C cleint tool" but there is no step asking me to install it (Also checked the xda thread when people had this problem)
And then when I start the LG tool it says I'm not connected to the internet, but it's not true...
PS: I can access my internal storage when the phone is on and connected to the PC.
With all this information, does anyone know how to fix this and make my phone work again?
My phone is a LG G2 D802 and It seems I lost the root and TWRP because of this.
----------------------------------------------------
Guys I bring you some news
I tried on another PC and know I started recovering it, but noow it says my smartphone is not connected on PC but it is, I tried on download mode and turned on but failed on both situations.. Can anyone help me??
THX a lot guys.
That's ok guys, I just fixed the Phone
LeoStark said:
That's ok guys, I just fixed the Phone
Click to expand...
Click to collapse
HOWWWWW PLEAS HELP SAME PROBLEM HERE :crying::crying::crying::crying:
Stef_xXxzg said:
HOWWWWW PLEAS HELP SAME PROBLEM HERE :crying::crying::crying::crying:
Click to expand...
Click to collapse
I don't remember how i fixed it. even because now I have the LG G3. But everytime Iget stuck in things like this and the hardreset doesn't work, I try to install the KDZ file using the Flashtools.It may work for you too.
Hello all.
I have an LG E610 L5 and was trying to update my CM11 9.1 to 9.3 (per the three-step instruction at http://forum.xda-developers.com/showthread.php?t=2519448). After installing the latest beta with CWM and all going smoothly, when the phone finally boots up the touchscreen doesn't seem to work. In other words, I can't get past the SIM lock.
Tried wiping cache, but it didn't help.
I had the same problem with TeamOPTIMA's CM port, but PecanCM's 9.1 was usable. Does anyone have any ideas what I could try to get it to work?
addendum edit: downgraded back to 9.1 backup, touchscreen works again. Either I do something wrong while updating (followed the instructions in the linked thread), some app is going haywire or my E610 has some strange issues with 9.3...
Hi Guys
i have installed this rom for my phone:
http://forum.xda-developers.com/s6-edge-plus/development/rom-crisscross-rom-v1-0-t3263963
And i did every thing right but after installing the rom my phone is not working any more!
i can not install a new rom becouse when i opening the installation menu (choosing language, wifi pass.) he reseting him self in 5-6 seconds i can do nothing pls help me guys ow can i fix this i have not found any ROM or Stock ROM to installing with ODIN
Sorry for my english PLS HELP GUYS
I Can not reinstall the rom from the start beccouse i have wiped every thign for fixing but it have not worked too :'(
BianosBenkei said:
Hi Guys
i have installed this rom for my phone:
http://forum.xda-developers.com/s6-edge-plus/development/rom-crisscross-rom-v1-0-t3263963
And i did every thing right but after installing the rom my phone is not working any more!
i can not install a new rom becouse when i opening the installation menu (choosing language, wifi pass.) he reseting him self in 5-6 seconds i can do nothing pls help me guys ow can i fix this i have not found any ROM or Stock ROM to installing with ODIN
Sorry for my english PLS HELP GUYS
I Can not reinstall the rom from the start beccouse i have wiped every thign for fixing but it have not worked too :'(
Click to expand...
Click to collapse
try to boot to recovery and perform factory reset
or flash stock firmware using odin, download stock firmware in samobile
yes sure....flash with odin firmware stock
Hello guys, I hope you can help me.
I bought my zuk z1 from a website called "notebooksbilliger.de" and it had stock Cyanogen OS installed.
I had no problems to install all updates up to the version 12.1-YOG4PAS3OH.
Today I recieved a new update and a can't install it. My phone restarts, vibrate and reboot without installing any update.
I also can't boot manual into the recovery mode, it just reboots..
I hope you guys can help me!
Thanks !!
you can do like that
http://4pda.ru/forum/index.php?showtopic=701320&st=2880#entry47573182