Database Users

My U8800 pro Bricked

Hi i tried to install custom rom so renamed recovery.img to icsrecovery.img and put Custom roms recovery .img and restarted the phone . But now my phone is gone . It showing
"
Image signature verify fail!
Your boot/recovery image may have an incorrect signature.
Please update your image to a signature official one.
You can remove battery for power down."
Please help me :crying:

Gajanana said:
Hi i tried to install custom rom so renamed recovery.img to icsrecovery.img and put Custom roms recovery .img and restarted the phone . But now my phone is gone . It showing
"
Image signature verify fail!
Your boot/recovery image may have an incorrect signature.
Please update your image to a signature official one.
You can remove battery for power down."
Please help me :crying:
Click to expand...
Click to collapse
This is a problem I had once too and I was like "OMG I [email protected] up my phone!!!" but it's not a big deal fixing it at all. Just go to huaweidevice.com download official ICS from there and then format your sd card. Open the rar file you downloaded and copy the dload folder that you will find in folder step 1. Put your sd card on your phone, connect it to your charger and press vol + vol- and power button at the same time. When update complete(step one takes 4-5 seconds) format your sd card again and do the same with step 2 and step 3. Step 2 takes about 5 minutes so no need to worry. Let the recovery wipe cache when you finish step 3 and then it will reboot 2-3 times. Then go to official ICS thread by pikachukaki and unlock pink screen. Through pink screen replace the recovery.img with the recovery made by ivan or geno and then reboot your phone. Flash a custom rom of your liking doing wipe cache, format factory reset, wipe dalvik, format system and install zip from sd card. PROFIT :good:

Thank you my phone worked fine . Only step2 is enough. But to unlock pinkscreen only pow+vol++vol- is enough or anything more to do. Coz my pc is not detecting any media in pinkscreen.pls post the link if u have:thumbup:
Sent from my U8800Pro using xda premium

hi
SvTeam said:
This is a problem I had once too and I was like "OMG I [email protected] up my phone!!!" but it's not a big deal fixing it at all. Just go to huaweidevice.com download official ICS from there and then format your sd card. Open the rar file you downloaded and copy the dload folder that you will find in folder step 1. Put your sd card on your phone, connect it to your charger and press vol + vol- and power button at the same time. When update complete(step one takes 4-5 seconds) format your sd card again and do the same with step 2 and step 3. Step 2 takes about 5 minutes so no need to worry. Let the recovery wipe cache when you finish step 3 and then it will reboot 2-3 times. Then go to official ICS thread by pikachukaki and unlock pink screen. Through pink screen replace the recovery.img with the recovery made by ivan or geno and then reboot your phone. Flash a custom rom of your liking doing wipe cache, format factory reset, wipe dalvik, format system and install zip from sd card. PROFIT :good:
Click to expand...
Click to collapse
I was trying to follow your steps beacose i have the same problem but i dont know how to format and how to find my sd card how that is posible to find it ? when i start my phone i find only 1 folder that name is (Image) that's all :/ and inside of this file i have only 1 file that name is (recovery.img) any way plis help me how to find or open my sd card???

signature verification failed
pls ....say how to unbrick...my u8800 pro also....it also show signature verification failed....

[fix] Huawei Honor 4x (CHE-L04) stucked at Honor logo { RECOVERY FIX FOR HONOR 4X }

Recently there was an issue with Honor 4x users who updated from KitKat (emui 3.0) --> Lollipop (emui 3.1) version due to some server issues(might be too many downloads at same time because of many many users of Honor4X in India) This is actually due to a corrupted recovery and flashing a new recovery might solve the issue.
To solve the issue HONOR 4X stucked at Honor logo ,i have an easy solution for all those users: Please download and extract the software package from below official path(around 35MB file)
https://drive.google.com/folder/d/0ByJkSOohdNz_Wnd6cVQ3Nlh1am8/edit
Requirements:
1) Make sure that the Micro SD card is available with enough free space(atleast 200MB) and can be read and write. It is recommended that The Micro SD card is made by Sandisk, Kingstone, or Kingmax.
2) Make sure that the power of the battery is enough to run the process. It is recommended that the power of the battery is more than 50%.
Procedure:
Step 1. Format the Micro SD card (This operation is OPTIONAL ).
Step 2. Copy the entire dload folder (with UPDATE.APP in it) contained in the file we downloaded to the root directory of the Micro SD card.
Step 3. Shut down the phone.
Step 4. Press the VOLUME UP + VOLUME DOWN + POWER Key(simultaneously for few seconds) to power on the phone and enter the Software Upgrade Mode begins automatically. This will start the FIX process on your device.
Step 5. When the progress bar stops(100% upgrade successful), the phone will automatically power OFF and restart.
:fingers-crossed::good: Your device should be working fine now. :good::fingers-crossed:

software upgrade mode not working
my software upgrade mode does not working, it always goes straight to the TWRP recovery mode

Ruisu23 said:
my software upgrade mode does not working, it always goes straight to the TWRP recovery mode
Click to expand...
Click to collapse
Upgrade needs stock recovery to be installed and I don't think tha TWRP is stock

booted to twrp instead of the stock emergency recovery? try using huawei update extractor and get all the .img files and fastboot flash all the .img files. the method is pretty much the same as fixing my own Che2-L11. once you flashed all the .img files, yes. it will not boot. but, you can access the emergency recovery menu (the menu that allows you to scan and would allow reparing via wifi). IF you can get to this menu, then youre ok good to go for forced upgrade via microsd. just make sure you are using the latest version available your your region. IF it didnt work, you have to fallback by fastboot flash the kitkat version of update.app and force upgrade with that kitkat update.app file. then when its fully booted to language screen, proceed normally as you would a hard reset all phone, then use the usual lolipop, next mellow official update.app file. then, your typical twrp, magisk, and more.

honor_ninja95 said:
Recently there was an issue with Honor 4x users who updated from KitKat (emui 3.0) --> Lollipop (emui 3.1) version due to some server issues(might be too many downloads at same time because of many many users of Honor4X in India) This is actually due to a corrupted recovery and flashing a new recovery might solve the issue.
To solve the issue HONOR 4X stucked at Honor logo ,i have an easy solution for all those users: Please download and extract the software package from below official path(around 35MB file)
https://drive.google.com/folder/d/0ByJkSOohdNz_Wnd6cVQ3Nlh1am8/edit
Requirements:
1) Make sure that the Micro SD card is available with enough free space(atleast 200MB) and can be read and write. It is recommended that The Micro SD card is made by Sandisk, Kingstone, or Kingmax.
2) Make sure that the power of the battery is enough to run the process. It is recommended that the power of the battery is more than 50%.
Procedure:
Step 1. Format the Micro SD card (This operation is OPTIONAL ).
Step 2. Copy the entire dload folder (with UPDATE.APP in it) contained in the file we downloaded to the root directory of the Micro SD card.
Step 3. Shut down the phone.
Step 4. Press the VOLUME UP + VOLUME DOWN + POWER Key(simultaneously for few seconds) to power on the phone and enter the Software Upgrade Mode begins automatically. This will start the FIX process on your device.
Step 5. When the progress bar stops(100% upgrade successful), the phone will automatically power OFF and restart.
:fingers-crossed::good: Your device should be working fine now. :good::fingers-crossed:
Click to expand...
Click to collapse
plz resend link

[FIX] HUAWEI HONOR 4X (CHE-L04 indian edition) STUCKED AT HONOR LOGO

If your device is stucked at honor recovery logo or in a boot loop it is because the recovery of the device is corrupted. You can fix it easily by doing as follows which is very simple.
Procedure:
Step 1. Download the file from here .
HONOR 4X RECOVERY GOOGLE DRIVE DOWNLOAD
Step 2. Extract the downloaded file and copy the entire dload folder (with UPDATE.APP in it) contained in the file we downloaded to the root directory of the Micro SD card.
Step 3. Shut down the phone.
Step 4. Press the VOLUME UP + VOLUME DOWN + POWER Key(simultaneously for few seconds) to power on the phone and enter the Software Upgrade Mode begins automatically. This will start the FIX process on your device.
Step 5. When the progress bar stops(100% upgrade successful), the phone will automatically power OFF and restart.
Thats all.. You have flashed Fresh stock recovery on your Honor 4x.

Has anyone tried this? I am asking this because I have already wasted much data over this and my phone is still stuck on welcome logo only.

honor 4x stuck at fastboot mode
dear sir i have tried your method but its not working i own a honor 4x che1 L04 and while i was flashing it for custom recovery my phone struck at fast boot mode i have been to honor service center but they are unable to solve my problem my contact no is 7379515262 i am really in great problem plzz help me out plzz contact as soon as possible i will be highly grateful to you for your consideration

For CHE1-L04
Dear all,
My honor 4x was stuck in fastboot mode as I was flashing custom Rom in it, so I tried to flash stock rom but it always showed errors, then I went through this site and downloaded this Indonesian stock rom and bingo! My phone is now working normally like before. So maybe flipkart send me the Indonesian honor 4x phone to me labelling che1-L04 or it was my luck.
So go to this site called gizrom dot com
And download the Indonesian stock rom
And follow the steps shown above
This will surely help u guys,
Thank you,
Yogesh Gujarathi

Please provide a working download link.
Thanks.

Hi,
I tried with dload, but no luck... the update got hung at 5%. Please help me

HelpGT-I9300I odin theres no partition ,mmc write fail.Only start in dowloading mode

Good evening,
This is the first time I post here and my GT- I9300I was working but the battery had just quickly ( 1 hour use at most , heated machine ) and my IMEI was null \ null. I bought the unit secondhand but I was trying to solve these problems by odin , I backup the efs folder and etc ... But to try at Odin in any version flash the device came across the error " There's no partition pit ", and in so downloading the message : " mmc write fail" . Soon after I tried to restore the cell the way recovery along with the sd card but without success . I then decided to take a cw and flashing by cell own which caused the device now only is in downloading mode and I can not put him or download mode or turn it again. It already starts in recovery mode! If you can help me thank you !!

* I tried to flash the cw to fix the recovery mode problem that was not able to format the memory card

anyone ? my error is stupid ?

samsung s4 mini GT-I9195 LTE dead phone

hello guys
i need help about flashing my 2 dead phone GT-I9195.
in my laptop it shown : Qualcomm HS-USB QDLoader 9008 .
i know we can't use qpst so sad .
i'm searching for solution without the z3x box or any other items.
First i follow this guide :
LINK (
[HARD BRICK ?] - I919x - Make your debrick.img and have it on extSdCard by security
Hi People We all must have the debrick.img on our extSdCard by security. If we have a Hard Brick we can make like this examples solved whit success. See two HARD BRICK's solved. I have sending them the debrick.img: This whit a Guide...
forum.xda-developers.com
)
debrick.img 4.4.2 -> LINK (https://mega.nz/#!T9hxAJQC!e74HQeHhU66fmPFVFOLdxTtFyR-fxntfc37qFb22oRA)
i use Win32DiskImager to flash the debrick.img in 16GB Sd card
i put sd card in the phone.
the phone boot to T-flash(Odin) .
i use the CSB_signed_SERRANOLTE_ONEPIT_OPEN_130523.pit and then i flash I9195XXUCQL2_I9195XXUCQL2.tar from TRWP guide : LINK (
[RECOVERY][OFFICIAL] TWRP 3.5.2_9-0 [I9190][I9192][I9195][L520]
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and...
forum.xda-developers.com
)
i tried TRWP , CWM recovery.img and both worked.
in TRWP only focused on the internal Storage and it is 0 MB , can not wipe or mount or do anythink , i want to change TRWP to see the SD CARD.
so with CWM i can use adb sideload to falsh zip file.
i try cm-13.0-20161219-NIGHTLY-serranoltexx.zip with adb : not work ,no system shown.
when i change the phone to download mode i flashed :
I9195XXUCQL2_I9195TMZCQL2_I9195XXUCQL2_HOME.tar ,
I9195XXUCPB1_I9195ITVCPB2_I9195XXUCPB1_HOME.tar ,
I9195XXUCNH5_I9195OJVCNH1_I9195XXUCNH5_HOME.tar.md5 ,
I9195UBUCOH1_I9195ZVVCNI1_I9195UBUCOH1_HOME.tar.md5.
no system shown , and the phone back to the T-flash and i do the same reflash CSB_signed_SERRANOLTE_ONEPIT_OPEN_130523.pit and I9195XXUCQL2_I9195XXUCQL2.tar to can boot to download mode.
The big problem is there is no system. only i can use download mode and recovery mode(TRWP , CWM).
I want the phone to have system
please anyone can help me , i'll do my best in research.

chakroun saifallah said:
hello guys
i need help about flashing my 2 dead phone GT-I9195.
in my laptop it shown : Qualcomm HS-USB QDLoader 9008 .
i know we can't use qpst so sad .
i'm searching for solution without the z3x box or any other items.
First i follow this guide :
LINK (
[HARD BRICK ?] - I919x - Make your debrick.img and have it on extSdCard by security
Hi People We all must have the debrick.img on our extSdCard by security. If we have a Hard Brick we can make like this examples solved whit success. See two HARD BRICK's solved. I have sending them the debrick.img: This whit a Guide...
forum.xda-developers.com
)
debrick.img 4.4.2 -> LINK (https://mega.nz/#!T9hxAJQC!e74HQeHhU66fmPFVFOLdxTtFyR-fxntfc37qFb22oRA)
i use Win32DiskImager to flash the debrick.img in 16GB Sd card
i put sd card in the phone.
the phone boot to T-flash(Odin) .
i use the CSB_signed_SERRANOLTE_ONEPIT_OPEN_130523.pit and then i flash I9195XXUCQL2_I9195XXUCQL2.tar from TRWP guide : LINK (
[RECOVERY][OFFICIAL] TWRP 3.5.2_9-0 [I9190][I9192][I9195][L520]
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and...
forum.xda-developers.com
)
i tried TRWP , CWM recovery.img and both worked.
in TRWP only focused on the internal Storage and it is 0 MB , can not wipe or mount or do anythink , i want to change TRWP to see the SD CARD.
so with CWM i can use adb sideload to falsh zip file.
i try cm-13.0-20161219-NIGHTLY-serranoltexx.zip with adb : not work ,no system shown.
when i change the phone to download mode i flashed :
I9195XXUCQL2_I9195TMZCQL2_I9195XXUCQL2_HOME.tar ,
I9195XXUCPB1_I9195ITVCPB2_I9195XXUCPB1_HOME.tar ,
I9195XXUCNH5_I9195OJVCNH1_I9195XXUCNH5_HOME.tar.md5 ,
I9195UBUCOH1_I9195ZVVCNI1_I9195UBUCOH1_HOME.tar.md5.
no system shown , and the phone back to the T-flash and i do the same reflash CSB_signed_SERRANOLTE_ONEPIT_OPEN_130523.pit and I9195XXUCQL2_I9195XXUCQL2.tar to can boot to download mode.
The big problem is there is no system. only i can use download mode and recovery mode(TRWP , CWM).
I want the phone to have system
please anyone can help me , i'll do my best in research.
Click to expand...
Click to collapse
Hello , i think you wiped your system you have to install another one. Try Lineage Os

If it does not work try shutting down the phone, remove battery and hold power button for 30 seconds.

Zac C4rter said:
If it does not work try shutting down the phone, remove battery and hold power button for 30 seconds.
Click to expand...
Click to collapse
remember i can't control the internal storage because the phone is dead , i only have the files and partitions in the SD card(external Storage) .
i already tried Lineage Os . the CWM say
+ can't mount /cache/system , mount : failed .... and long message.
it show erreur then installation aborted.
all this because the partition is in /storage/sdcard1.
so how i should redirect the installation ?

chakroun saifallah said:
remember i can't control the internal storage because the phone is dead , i only have the files and partitions in the SD card(external Storage) .
i already tried Lineage Os . the CWM say
+ can't mount /cache/system , mount : failed .... and long message.
it show erreur then installation aborted.
all this because the partition is in /storage/sdcard1.
so how i should redirect the installation ?
Click to expand...
Click to collapse
Try switching to Ext4
:Edit
Also Check Here https://appuals.com/how-to-fix-twrp-unable-to-mount-storage-internal-storage-0mb/

Zac C4rter said:
Try switching to Ext4
:Edit
Also Check Here https://appuals.com/how-to-fix-twrp-unable-to-mount-storage-internal-storage-0mb/
Click to expand...
Click to collapse
i have tried it all the 11 steps and not work. internal storage is 0 MB
i'm using trwp 3.5.0_9.0
after i flashed the SD card with Win32DiskImager and with the debrick.img , everythink now is in the external storage, my problem is i can't access to it, or install zip file with trwp or cmw because i can't mount the partitions in trwp or cwm.
i only can use download mode to flash files by odin
i want to know if i can do it manuelly by termianl commends in trwp .
but how i can know the places of the unmounted partitions ?