Database Users

[help me pls] bricked gt-i9505, only download mode and can not write nand memory.

Hi to all of you guys, first of all, XDA forever... in secundis, sorry for my bad english
And now let's start explain...
i'm too sad cause thanks to the life savings i could buy a GS4 GT-I9505 that i bricked the last evening.
I were on a phoenix rom v9.4, when i decides to install AEL kernel stable version 6B. At the boot all the main processes could not startup and they crashes
Since i had not the rom in the sdcard to re-flash, i flashed a 4.4.2 stock rom hoping that would work. But it doesn't..........
I can only go in download, no recovery, with the typical image smartphone - pc with a triangle between them and the phrase "firmware upgrade encountered an issue......." and bla bla bla
when i flash something with odin it gives me this:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUGNG8_I9505ITVGNG1_I9505XXUGNG8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Added!!
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> SingleDownload.
<ID:0/010> sbl1.mbn
<ID:0/010> NAND Write Start!!
<ID:0/010> sbl2.mbn
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/010> Removed!!
<ID:0/010> Added!!
Please help me as you can !

Note 4 SMN-910G (Need advice pls....)

Hi,
I am not sure if I have posted to the right section in the forum. I need help pertaining to flashing original firmware to my note 4 SM-N910G. I have used Odin v3.10.6 and have encountered the below error:
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910GDTU1COL2_N910GOLB1COL3_N910GDTU1COJ4_HOME.tar .md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin engine v(ID:3.1005)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> SingleDownload.
<ID:0/010> aboot.mbn
<ID:0/010> NAND Write Start!!
<ID:0/010> sbl1.mbn
<ID:0/010> FAIL!
<ID:0/010>
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed )
Can anyone please advise me what is wrong with my flashing and why does it fail? I need to flash original firmware as my note 4 has blank screen issue. I am not able to factory reset my note 4 as I cannot go into that mode to do so. I am able to go into Odin Mode so I thought to flash original firmware to save my note 4.
I did try using SmartSwitch to update my rooted note 4 but it did not manage to update. No errors shown, just mentioned that update is not successful. Please help as I am totally lost on what to do.... Thanks in advance. Will appreciate step by step guide as I am not a Pro in this area. Sorry about that. You can also email me at [email protected]
Regards,
Wendy

desperate for some help with a sm-900f

Hi,
I wouldnt say im a complete novice, i've rooted lots of devices without a hitch in the past. But after a day of trying I have to concede now that I am not as good as i thought. I can't load a rom onto my already (well was) rooted galaxy s5. It seemed a simple task, I downloaded the Marshmallow rom from sammobile for my right carrier, region etc I wanted to upgrade lollipop i had on it. Unfortunately it kept failing in odin 11. Made sure I copied the file to AP etc but wouldn't load.
Long story short I did manage to load a custom rom Galaxy S5 CM14 (CyanogenMod 14, Nougat ROM but I couldn't really get on with it so attempted to reinstall the official rom. I did also load twerp which I cant do and now with a firmware called philztouch which is the only thing I can seem to flash now. Unfortunately everytime I go into download mode and attempt a rom install it doesnt work.
This is what it is outputting attempting the official marshmallow rom below.... Any help much appreciated.
:crying:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900FXXU1CPFA_G900FEVR1CPF1_G900FXXU1CPE6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Removed!!
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1

fatfei said:
Hi,
I wouldnt say im a complete novice, i've rooted lots of devices without a hitch in the past. But after a day of trying I have to concede now that I am not as good as i thought. I can't load a rom onto my already (well was) rooted galaxy s5. It seemed a simple task, I downloaded the Marshmallow rom from sammobile for my right carrier, region etc I wanted to upgrade lollipop i had on it. Unfortunately it kept failing in odin 11. Made sure I copied the file to AP etc but wouldn't load.
Long story short I did manage to load a custom rom Galaxy S5 CM14 (CyanogenMod 14, Nougat ROM but I couldn't really get on with it so attempted to reinstall the official rom. I did also load twerp which I cant do and now with a firmware called philztouch which is the only thing I can seem to flash now. Unfortunately everytime I go into download mode and attempt a rom install it doesnt work.
This is what it is outputting attempting the official marshmallow rom below.... Any help much appreciated.
:crying:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900FXXU1CPFA_G900FEVR1CPF1_G900FXXU1CPE6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Removed!!
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1
Click to expand...
Click to collapse
Just an update, i have loaded twrp on there but too scared to touch anything else pending help

Hi try this guide find a g900f pit file or if you have made a backup of your own and flash it via odin then try again to flash stock
Url : forum.xda-developers.com/showthread.php?t=2659635

Unfortunately I now get this error on Odin
D:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin engine v(ID:3.1205)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Set PIT file..
<ID:0/010> DO NOT TURN OFF TARGET!!
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> SingleDownload.
<ID:0/010> aboot.mbn
<ID:0/010> sbl1.mbn
<ID:0/010> rpm.mbn
<ID:0/010> tz.mbn
<ID:0/010> sdi.mbn
<ID:0/010> NON-HLOS.bin
<ID:0/010> boot.img
<ID:0/010> recovery.img
<ID:0/010> system.img.ext4
<ID:0/010> modem.bin
<ID:0/010> cache.img.ext4
<ID:0/010> hidden.img.ext4
<ID:0/010> FAIL! (Size)
<ID:0/010>
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

force alarm, i was just being impatient. all working. Thank you very much for the help

No problem mate ?

S7 edge SM-G935F blocked on TWRP

Hi guys help pls
I will be brief, my smartphone s7 SM-G935F he's stuck on TWRP... I wanted to install this firmware with ODIN
but impossible I have this message
<ID:0/010> Added!!
<ID:0/010> Removed!!
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin engine v(ID:3.1301)..
<ID:0/010> File analysis..
<ID:0/010> Total Binary size: 3914 M
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> NAND Write Start!!
<ID:0/010> SingleDownload.
<ID:0/010> boot.img
<ID:0/010> recovery.img
<ID:0/010> FAIL!
<ID:0/010>
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
help pls guys
TY

what do you mean stuck? does it hang on TWRP logo and not moving? Or you want to install some other recovery or stock firmware.
Ps. if you are stock firmware, i hope its latest as you might have updated your bootloader or modem bec of some custom roms.

SM-T580 Soft bricked

A friend of mine recently handed me a SM-T580 (Nordic variant) with Android 7.0(I believe).
The tablet was used and I ended up flashing TWRP and that did not go well. I had some weird vertical blue and red lines and the tablet is not booting. The problem got worse when I tried flashing the factory firmware (T580XXU2BRB2_T580ATO2BRA1_ATO). Now the tablet does not show anything on the screen all after the "Samsung galaxy tab A6" splash screen. When I attempt to flash the above file, I get the following error on the tablet:
Code:
ODIN MODE
DOWNLOAD SPEED: FAST
PRODUCT NAME: SM-T580
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: CUSTOM
FRP LOCK: OFF
SECURE DOWNLOAD: ENABLED
WARRANTY VOID: 1 (OXO30C)
RP SWREV: B:4 K:1S:2
SW REV CHECK FAIL. DEVICE: 4. BINARY: 2
On Odin 3.12.10 I get:
Code:
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin engine v(ID:3.1301)..
<ID:0/010> File analysis..
<ID:0/010> Total Binary size: 3107 M
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> NAND Write Start!!
<ID:0/010> SingleDownload.
<ID:0/010> boot.img
<ID:0/010> recovery.img
<ID:0/010> FAIL!
<ID:0/010>
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/010> Removed!!
<ID:0/011> Added!!
<ID:0/011> Removed!!
<ID:0/011> Added!!
<ID:0/011> Removed!!
<ID:0/011> Added!!
<ID:0/011> Removed!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Added!!
<ID:0/010> Odin engine v(ID:3.1301)..
<ID:0/010> File analysis..
<ID:0/010> Total Binary size: 3112 M
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> NAND Write Start!!
<ID:0/010> SingleDownload.
<ID:0/010> sboot.bin
<ID:0/010> param.bin
<ID:0/010> FAIL!
<ID:0/010>
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've tried older versions of Odin and I still get the same error.
I've tried other factory firmware images and I still get the same errors.
I tinkered with various settings in Odin such as: disabling/enabling auto reboot, Nand erase, re-partition and reset time.
I've also tried loading the BL and AP files individually or even together and same results.
I've also tried using different cables and tried this on different two different laptops and one desktop as well.
I don't know what else to do.

justindroid64 said:
A friend of mine recently handed me a SM-T580 (Nordic variant) with Android 7.0(I believe).
The tablet was used and I ended up flashing TWRP and that did not go well. I had some weird vertical blue and red lines and the tablet is not booting. The problem got worse when I tried flashing the factory firmware (T580XXU2BRB2_T580ATO2BRA1_ATO). Now the tablet does not show anything on the screen all after the "Samsung galaxy tab A6" splash screen. When I attempt to flash the above file, I get the following error on the tablet:
On Odin 3.12.10 I get:
I've tried older versions of Odin and I still get the same error.
I've tried other factory firmware images and I still get the same errors.
I tinkered with various settings in Odin such as: disabling/enabling auto reboot, Nand erase, re-partition and reset time.
I've also tried loading the BL and AP files individually or even together and same results.
I've also tried using different cables and tried this on different two different laptops and one desktop as well.
I don't know what else to do.
Click to expand...
Click to collapse
You need an XXU4 firmware not XXU2.

ashyx said:
You need an XXU4 firmware not XXU2.
Click to expand...
Click to collapse
Thank you!
Problem fixed!