Database Users

[Q] Huawei U8800 Pro Hard Brick

Hello, Guys, Its my first post here, so i allready sorry for my bad English.
I have a big problem with my phone, the this is that when i try to turn it on huawei logo appears and after ~5 seconds it dissapears and nothing happens, phone just turns off. I also cant get acces to CMW. Al i can do is to go to pink screen mode. I also tyed to put dload folder with updates to sdhc card, but when i am trying to load i with 3 buttons combination (VOL +- + power on button), pink screen appears... What should i do in this situation? Maybe anyone had faced this problem, and how have you solved it?
Again sorry for my poor English , and thanks for your help

Looks like your boot and recovery partitions were messed up
Can u access ur fastboot mode?
If u can, try to flash a cwm recovery image using fastboot mode
Sent from my HAL

I cant acces anything exept pink screen. When i put dload folder to sd card update also doesnt start. Is there any way to acces internal memoty through pink screen?

Fastboot (or bootloader mode) is the one that stays (in ur case) at the huawey logo until it receives a command to reboot. Using it, adb and a pc, u can flash img's to the internal memory (among other things)
Try pressing and holding for 2/3 seconds this combo
Hang up button + power
Sent from my HAL

As i said before it doesnt help. I cant acces CWM. (bootloader)

Sorry, i was thinking on other phone. The pink screen is ur bootloader
Try this
" Installing ClockworkMod on the Huawei U8800
1) Extract the recovery.img from the zip file. 2) Turn on your phone while holding VOL+ and VOL- (should come up with pink/purple screen) 3) Connect to computer. 4) Go to My Computer and Browse your phone to find the folder with recovery.img in. 5) Replace the recovery.img with the one you extracted from the zip file.
Or this onehttp://forum.xda-developers.com/showthread.php?p=14870348
Sent from my HAL

Tryed both. Same problem persists

just in case you can´t get it fixed,
see my sig.....

i do have the same issue, please someone help me

Help bricked my p8 lite

i tried rooting my phone huawei p8 lite but got stuck at installing super su now i cannot start my device ..i cannot boot into flash mode or recovery ..i need help ...it wont even charge

pepeline said:
i tried rooting my phone huawei p8 lite but got stuck at installing super su now i cannot start my device ..i cannot boot into flash mode or recovery ..i need help ...it wont even charge
Click to expand...
Click to collapse
What's your build number what version of supersu did you try to flash?
Shutdown your device, put your current build onto 'dload' folder in the sdcard and press the following key combo: POWER, VOL-UP & VOL-DOWN, it should enable automatic update process

amageek said:
What's your build number what version of supersu did you try to flash?
Shutdown your device, put your current build onto 'dload' folder in the sdcard and press the following key combo: POWER, VOL-UP & VOL-DOWN, it should enable automatic update process
Click to expand...
Click to collapse
My phone restarts right at the logo when i press power vol up and vol down

pepeline said:
My phone restarts right at the logo when i press power vol up and vol down
Click to expand...
Click to collapse
Shut it down amd press those 3 keys combo.. upon seeing Huawei Logo and vibration, release the Power key while holding the other 2... That ought to do it

Man, your phone is badly bricked. If you don't have at least access to fastboot, then you're screwed.

Good for me to I have the same problem. I was trying to get to stock ( I have made it several times), but the last time was a fail... The whole process of sending firmware was ok. then a reboot and brick.
Now the huawei screen and the short vibration appears and shutdown.
I was trying everything.
In device manager the phone is displayed as mobile devices \ volume f:\ (drive letter)
in connected devices the phone is detected as
hi6210sft
Phone is not detected in fastboot or ADB.

I met this problem yesterday(I hope the identical ). Because I have two booting animations, one from Vodafone, I guess I shutdown early during installation. It just froze. Then it didn't boot and stock recovery didn't help
My solution needs some recovery software like twrp. Press three buttons at the same time until twrp mode. Copy zip file for SuperSU to phone or sdcard, then flash it. After that my phone works again.
You mentioned that you cannot start recovery. Try more. After installing twrp, starting it is quite annoying. Sometimes it just doesn't start or stock recovery starts. An alternative way is to go to whatever mode, and try adb or fast boot to reboot to recovery. Pressing button requires techniques which j don't have

I can't enter TWRP non combination is working for me. Installing firmware using dload from sd card also.

okay if non of these worked you can try flashing the whole update.app file by fastboot..
tools you will need
1- download the official huawei firmware from the official site
2- download Huawei Update Extractor
3- download minimal adb and fastboot
check the unbricking chapter of this thread
Note: to get in fastboot make sure you connected your phone to computer and press the vol down and power down buttons.. if none of these worked your phone is hard bricked .-. .. try opening the phone and reconnecting the battery worked with someone
if you need any help just pm me or replay on this thread hope that help you

Ok thx. I have already opened the phone to reconnect the battery
And then I was trying the combinations;
Battery connected vol- +power - Huawei logo and vibration and shutdown, no fastboot
Battery disconnected, vol-+power and connecting cable to phone - the same
Battery disconnected combination vol + vol - + ppwer, with sd card dload, the same
Battery connected combination vol + vol - power, sd card dload, the same
Any other suggestions?
The phone is recognized in Windows in device manager as mobile device as volume with a letter, I cant change the drivers to the right ones. I can't enter the storage it's unrecognized format.

Any other suggestions?

mercom said:
Any other suggestions?
Click to expand...
Click to collapse
it is easy to suggest others.. I too advised you.. but today i am facing the same problem...
what I tried:
Reinstalling the same ROM using dload method
Upgrading to other ROM (using both dload and flashing 4 image method)
Downgrading
Restoring from the backup
At one point, the phone booted up all well except the Wifi Module... So I flashed another ROM and stuck again...

the worst thing that I don't have any connection to fastboot Each firmware installation method fails

mercom said:
the worst thing that I don't have any connection to fastboot Each firmware installation method fails
Click to expand...
Click to collapse
yes, mine too... or I could say flashing succeeds but there's some problem with the boot partition... will get my phone today from the Customer Care and try again (if they can't repair).
you can try removing the back cover and unplugging the battery... that is one of the few things I will do today as I get my phone back..

mercom said:
the worst thing that I don't have any connection to fastboot Each firmware installation method fails
Click to expand...
Click to collapse
ok made it back.. just flashed the boot.img from b594 (the one I was using when my mobile got bricked)... somehow made it back. But now I am having a problem with the battery. It doesn't charge when the device is switched on, only when the device is switched off... will see for few days, if there's problem will take it back to service centre again

I have already removed back cover and was trying to reconnect the battery to do clear run. But the only thing is discovered in windows is a driver for storage and I can't change the driver to ADB or FASTBOOT
Now I have connected phone w PC on adb devices I see only emulator-5554 device. In Device manager I see the storage as a Mobile Device.
Nope it was Bluestacks

mercom said:
I have already removed back cover and was trying to reconnect the battery to do clear run. But the only thing is discovered in windows is a driver for storage and I can't change the driver to ADB or FASTBOOT
Now I have connected phone w PC on adb devices I see only emulator-5554 device. In Device manager I see the storage as a Mobile Device.
Nope it was Bluestacks
Click to expand...
Click to collapse
Switch off your device and then connect it to PC but just hold the volume- key.. that should get you in fastboot mode... I did that and then flashed the boot.img of the current ROM. This should boot it up...

Nope it doesn't work I was trying it already

P9 Lite VNS-L31 bootloop, no recovery, no twrp , no bootloader

hello,
after install some rom, my p9 lite get bootloop. I manage to enter fastboot but phone was locked, so to install twrp i unlocked it.
After unlock i can't enter fastboot.
Screen "your devices has been unlocked and can't be trusted" appears, vol up+- power, nothing happens phone vibe 2 times and back to screen "your devices...".
My bootloader is unlock, can i flash twrp without bootloader screen on phone ? My phone is connected to PC but no device detected. Maybe at linux i can do something more than windows ?
Maybe i need to go to fastboot some different way ? i try to push 3 button after fist vibe and 2nd. Nothing work for me :crying:
i tried to past b130 to sd card in dload, vol+- power, nothing not even update screen, same "your devices"....,
now downloading b151

dragon218 said:
hello,
after install some rom, my p9 lite get bootloop. I manage to enter fastboot but phone was locked, so to install twrp i unlocked it.
After unlock i can't enter fastboot.
Screen "your devices has been unlocked and can't be trusted" appears, vol up+- power, nothing happens phone vibe 2 times and back to screen "your devices...".
My bootloader is unlock, can i flash twrp without bootloader screen on phone ? My phone is connected to PC but no device detected. Maybe at linux i can do something more than windows ?
Maybe i need to go to fastboot some different way ? i try to push 3 button after fist vibe and 2nd. Nothing work for me :crying:
i tried to past b130 to sd card in dload, vol+- power, nothing not even update screen, same "your devices"....,
now downloading b151
Click to expand...
Click to collapse
For fastbooting u need to use volume down and power in the same time and the phone needs to be connected to PC, and for entering to recovery u only need to press volume up and power key.

robi10101298 said:
For fastbooting u need to use volume down and power in the same time and the phone needs to be connected to PC, and for entering to recovery u only need to press volume up and power key.
Click to expand...
Click to collapse
phone is connected to pc. screen is on "your device..." i push vol down + power. screen going black vibe 2 times, 1 sec huawei logo and back to "your device..". I don't know why after unlock phone i can't go to fastboot
i it possible to erase fastboot ??!!

dragon218 said:
phone is connected to pc. screen is on "your device..." i push vol down + power. screen going black vibe 2 times, 1 sec huawei logo and back to "your device..". I don't know why after unlock phone i can't go to fastboot
Click to expand...
Click to collapse
Disconnect the phone from PC. Make sure it's powered off. Plug in USB cable at the same time while holding volume down.

zgomot said:
Disconnect the phone from PC. Make sure it's powered off. Plug in USB cable at the same time while holding volume down.
Click to expand...
Click to collapse
don't work, after power on still going to "your devices". Even change pc and usb cable
I can belived that i can open fastboot when phone was lock, after unlock fastboot vanished
dc-phoenix can help if pc dont see device ?

dragon218 said:
don't work, after power on still going to "your devices". Even change pc and usb cable
I can belived that i can open fastboot when phone was lock, after unlock fastboot vanished
dc-phoenix can help if pc dont see device ?
Click to expand...
Click to collapse
Don't work, after power on......why power on?
Disconnect from PC. Power of the phone.
Press and hold only vol down, with pressing vol down connect with PC. Device should be start on fastboot mode.
Sent from my NEM-L21 using Tapatalk

Anonda said:
Don't work, after power on......why power on?
Disconnect from PC. Power of the phone.
Press and hold only vol down, with pressing vol down connect with PC. Device should be start on fastboot mode.
Sent from my NEM-L21 using Tapatalk
Click to expand...
Click to collapse
in 5 min i will send video i think i'm doing everything right
if u can look at it
http://sendvid.com/svihvenb

No compatible source was found this video
Sent from my NEM-L21 using Tapatalk

Anonda said:
No compatible source was found this video
Sent from my NEM-L21 using Tapatalk
Click to expand...
Click to collapse
try this from yt
https://youtu.be/K36zMsaP4As

try putting update.app file into dload folder on your sdcard and updating via three button method.

sirjohnrl said:
try putting update.app file into dload folder on your sdcard and updating via three button method.
Click to expand...
Click to collapse
Try with b130 and b161 for region c432 nothing happened. 2 days ago i change region from c185 to c432 now i think maybe i need to past c185b161 to work ?
update doesn't start either, losing hope some one have any other ideas ?

dragon218 said:
try this from yt
https://youtu.be/K36zMsaP4As
Click to expand...
Click to collapse
On the starting, your phone is on.
Then you shutdown? How?
After power off
Press and hold only vol down, connect with pc.
Hi suit installed on your PC?
Sent from my NEM-L21 using Tapatalk

Anonda said:
On the starting, your phone is on.
Then you shutdown? How?
After power off
Press and hold only vol down, connect with pc.
Hi suit installed on your PC?
Sent from my NEM-L21 using Tapatalk
Click to expand...
Click to collapse
i hold power button, if phone isn't connected to pc he is going off. Think is because battery is very low, led is blinking in red.
Then I hold vol down and connect usb cable, but how u can see on video phone weak up and go to booting.
I have hi suit last night as i mention fastboot works, but need to unlock phone. After that "your devices" screen came out and can't fastboot anymore
When i turning off phone with connected usb i can't turn phone off. After a second phone power on by his own.
If phone is disconnected longer than 5 min, then i push vol down and connect usb only red lightening shows up. I need to wait a while to phone start.

dragon218 said:
i hold power button, if phone isn't connected to pc he is going off. Think is because battery is very low, led is blinking in red.
Then I hold vol down and connect usb cable, but how u can see on video phone weak up and go to booting.
I have hi suit last night as i mention fastboot works, but need to unlock phone. After that "your devices" screen came out and can't fastboot anymore
When i turning off phone with connected usb i can't turn phone off. After a second phone power on by his own.
If phone is disconnected longer than 5 min, then i push vol down and connect usb only red lightening shows up. I need to wait a while to phone start.
Click to expand...
Click to collapse
OK. When phone is off, if you connect with PC, phone should be start, but this is only for charging. May be, you don't have charge, so phone is not going to fastboot mode with vol down?
Now just connect the phone with PC for full charge.
You don't have any recovery? Custom or stock?
It can be happen?
Sent from my NEM-L21 using Tapatalk

Anonda said:
OK. When phone is off, if you connect with PC, phone should be start, but this is only for charging. May be, you don't have charge, so phone is not going to fastboot mode with vol down?
Now just connect the phone with PC for full charge.
You don't have any recovery? Custom or stock?
It can be happen?
Sent from my NEM-L21 using Tapatalk
Click to expand...
Click to collapse
When i start charge phone blinking red in led, after while phone vibe 1 time and go to booting now, but led don't stop blinking. I will try to charge it, but because of working screen, phone heat a lot i don't wanna burn it.
Before i made rollback and something gone very bad, emui update after 100 % phone don't boot up. Without usb cable i wasn't able to go recovery or fastboot. So i think i don't have any recovery i made backup of files with twrp but now i can't flash it.

after night without power, phone drain all of battery. Now i understood better what is going on. when i plugged usb cable, phone don't start bye it own, only red lighting flash for second .
I disconnect cable and connect it with vol down button how all of here wrote. Phone immediately weak up an go to "your device has been..".
It's look like after i unlock phone (bootloader) somehow i was able to corrupt bootloader files or even delete it. Some one can confirm that it is possible to crash bootloader ?

dragon218 said:
after night without power, phone drain all of battery. Now i understood better what is going on. when i plugged usb cable, phone don't start bye it own, only red lighting flash for second .
I disconnect cable and connect it with vol down button how all of here wrote. Phone immediately weak up an go to "your device has been..".
It's look like after i unlock phone (bootloader) somehow i was able to corrupt bootloader files or even delete it. Some one can confirm that it is possible to crash bootloader ?
Click to expand...
Click to collapse
I have the same situation. I tried everything, Three button method, letting the battery run out completely, Vol+ and Power, Vol- and Power, connected to PC, not connected to PC. Every time I disconnect the charger, and reconnect it starts from 0. I read some other people here have the same problem. Send it to warranty and explain your rollback process unlocked the bootloader somehow (I mean the phone does do a lot of sh*ty sh*t, so this shouldn't seem very odd as well!!!) and hope that you get a repair/replacement and after that sell it on ebay hoping some stupid people like us in the first place will buy it and spend your money on a phone more reliable!

I managed to access the fastboot using the 3 button method in cold boot. Hold the Power key until the screen goes off and then release and hold down the Vol- key and immideately connect the usb cable to PC right before it vibrates or exactly when it vibrates (it's a matter of timing), and bingo you are in fastboot and you can flash system.img, recovery.img, cust.img, cache.img and boot.img from there, but this is not how I revived my phone. I used the 3 button method again when the phone was charged for like half an hour or so and the did the same cold boot trick and I could boot into the force upgrade environment (strangely this still didn't work whitout connecting the usb cable to PC), but it somehow didn't want to read the UPDATE.APP that I had in dload folder on my SD card and wanted to have it from my PC (I just felt it nad there was no indication of it ) so then I installed the DC Phoenix tool and payed 15 euros to be able to inject the complete UPDATE.APP to my bricked phone and the installation went well to 99% and failed, but I rebooted the phone and I could boot normally. Just to make sure I did a factory reset afterwards. Hope this helps.

bahador_b_92 said:
I managed to access the fastboot using the 3 button method in cold boot. Hold the Power key until the screen goes off and then release and hold down the Vol- key and immideately connect the usb cable to PC right before it vibrates or exactly when it vibrates (it's a matter of timing), and bingo you are in fastboot and you can flash system.img, recovery.img, cust.img, cache.img and boot.img from there, but this is not how I revived my phone. I used the 3 button method again when the phone was charged for like half an hour or so and the did the same cold boot trick and I could boot into the force upgrade environment (strangely this still didn't work whitout connecting the usb cable to PC), but it somehow didn't want to read the UPDATE.APP that I had in dload folder on my SD card and wanted to have it from my PC (I just felt it nad there was no indication of it ) so then I installed the DC Phoenix tool and payed 15 euros to be able to inject the complete UPDATE.APP to my bricked phone and the installation went well to 99% and failed, but I rebooted the phone and I could boot normally. Just to make sure I did a factory reset afterwards. Hope this helps.
Click to expand...
Click to collapse
Now your phone is OK?
Sent from my NEM-L21 using Tapatalk

Anonda said:
Now your phone is OK?
Sent from my NEM-L21 using Tapatalk
Click to expand...
Click to collapse
Yes. I am actually writing this from my Huawei P9 Lite now. This phone is really a nightmare for modifying and customization. I'm not sure if I'm going to resell it or just wait a reasonable amount of time until some reviews from the next update come out and see if I might wanna take the risk and update my phone again.

Deleted everything in TWRP. And after a few tries to fix it, TWRP has gone too!

I have no android, and twrp seems to have been overridden by the stock thing. Which only has the options to restore to factory settings(that's not gonna help!) and clear partition. (did it but it didn't help).
When turning it on, it goes from the Huawei logo to the "your device has been unlocked and can't be trusted", which it gets stuck on if I don't do anything. Then if i hold vol up and power, it restarts, and does it again. Though if i do it faster I can get to the recover that has the two options.
There's also another screen it goes to which has reboot, shutdown, and download latest version and recovery. The download latest version and recovery makes me connect to wifi then says "retrieving package" but then says failed.
I'm not tech savy, and only started doing all this rooting/going under the hood. Because I'm trying to fix the play store/anything google related not working. Now I appear to have softbricked(hard?) the phone. If I take it to a chop shop do you think they'll be able to fix it? Or do you know what I can do?

What's ur device number? This happened to me and i managed to dload stock firmware and restore device.

Plug in USB
Boot into bootloader
Fire up a terminal
$ fastboot flash recovery ~/TWRP.img
Unplug device and boot into recovery
Reflash ROM

shayaanshaikh1 said:
What's ur device number? This happened to me and i managed to dload stock firmware and restore device.
Click to expand...
Click to collapse
Can't check device number right now, because I can't access anything in the phone. Any other way to check?

Carlyle_f said:
Plug in USB
Boot into bootloader
Fire up a terminal
$ fastboot flash recovery ~/TWRP.img
Unplug device and boot into recovery
Reflash ROM
Click to expand...
Click to collapse
Hmm... I'll try this soon, though I don't think my computer detects my device anymore...

I had that problem along with a few of my friends, turns out the standard cable is pretty ****ty, try another

Do u remember ur build number?
It should say if it is vns l31 or l21 on the box

shayaanshaikh1 said:
Do u remember ur build number?
Click to expand...
Click to collapse
He doesn't need this, download c432 OEMINFO and flash it, it'll lock your bootloader, unlock it again and reflash TWRP via fastboot (bootloader) then download and flash C432B370 update + data and flash it then reboot. Any other C432 ROM will work too

it was vns l31

I already unlocked my bootloader before though. I also rooted it.

Do you have a link to a rom I can download?
will one of these work?
https://forum.xda-developers.com/hu...huawei-p9-lite-firmware-compilations-t3517124
I'm in europe do I download VNS-L31C432B151 - Full Europe?

Ok, I've booted into bootloader.
The screen has a circle with EMUI inside.
And 3 options
"Reboot system now"
"Wipe data/factory reset"
"wipe cache partition"
I plugged in a usb cable, and heard the connected sound. So my computer detects it.(yay!)
by terminal you mean cmd, right? I'll do that now.
EDIT
Typed "fastboot flash recovery recovery_twrp.img"
it said waiting for any device...
So my computer doesn't detect the phone, I quit cmd and it an error came up saying "couldn't mount file the disc image is corrupted".
I'm scared I've bricked my phone. What If I put android on an sd card, and press vol up, vol down, and the power button. To get it to update? Will that fix this?
EDIT 2
by pressing power and vol down. i can get to a fastbot and rescue mode. Will this help me? It says connect usb cable to computer, and open hisuite... device still not listed under cmd though.
EDIT 3
Hisuite opens everytime I plug my phone in, but it doesn't say a device is connected. Can't do anything to it in cmd, because it's not recognised. No android, no twrp, no connection to computer...
If I put a rom on the an sd card, and put it in my phone, will I be able to install/flash it?

Are you certain your bootloader is unlocked? Just double check by trying to unlock it.

I unlocked my bootloader a few days ago. When I turn on my device it says it's been unlocked and can't be trusted. Now that android has been deleted I can't try to unlock it again. And I'm pretty sure it's already unlocked.

I just need some help on how I can make this device usable again. There's no OS, no TWRP, and it isn't detected by my computer. I think my only option is putting android on an sd card. Will that work?

TheFunkyChickenWing said:
I just need some help on how I can make this device usable again. There's no OS, no TWRP, and it isn't detected by my computer. I think my only option is putting android on an sd card. Will that work?
Click to expand...
Click to collapse
Yes it will, as long as it's the same region Cxxx

region Cxxx? Sorry still new...
EDIT
oooh, region Cxxx was the thing before the Bxxx. Damn I didn't save it and can't check because android is gone. I remember the first number being a 4 though. I think.
Also after I've put it on the SD card. I just have to press power, vol up, and vol down. To install it, right?

TheFunkyChickenWing said:
region Cxxx? Sorry still new...
EDIT
oooh, region Cxxx was the thing before the Bxxx. Damn I didn't save it and can't check because android is gone. I remember the first number being a 4 though. I think.
Also after I've put it on the SD card. I just have to press power, vol up, and vol down. To install it, right?
Click to expand...
Click to collapse
Yes it was most likely c432

"EDIT 2
by pressing power and vol down. i can get to a fastbot and rescue mode. Will this help me? It says connect usb cable to computer, and open hisuite... device still not listed under cmd though."
this is where you want to be.
in fastboot mode. connected to the computer, then use this tool to flash twrp
https://forum.xda-developers.com/hu...nt/europe-vns-l31-toolkit-bootloader-t3432873
then, boot into twrp by rebooting with power+ vol+
then mount the sd card in twrp and create a "dload" folder then copy an update.app file for your phone into it and
theeeen boot with power+ vol+ +vol- and it will write your rom
easy peasy.

Thanks velles2003! I'll try it shortly

Bricked :(

I think I may have bricked by M3 . Willing to paypal someone for a solution. Am unable to get into fastboot and it hangs at "your device is booting now...." no matter what button combo I press.
Have tried battery drain trick as well.

Have you tried creating a dload folder on your internal storage or sd card? Put the update.app for your model in there and then press power and up and down volume buttons at the same time.

Probably the only solution is to use an older version of ROM even if for Europe or whatever. Put in dload folder. Follow regular directions for that (two files). Get that older version working. Then unlock bootloader, install TWRP, then try upgrade again. I think I had to install TWRP 5 before it could be used for the upgrade to current ROM (EMUI 5).

I'm having the same problem as OP. The dload folder in the sd card method is apparently not an option as volume up + down + power doesn't enter the recovery mode. It either will just hang at "your device is booting now...." or it will flash the red charging symbol.

jasondf said:
I'm having the same problem as OP. The dload folder in the sd card method is apparently not an option as volume up + down + power doesn't enter the recovery mode. It either will just hang at "your device is booting now...." or it will flash the red charging symbol.
Click to expand...
Click to collapse
I have unfortunally exactly same problem.

When trying the button combo to enter recovery have you got the usb cable plugged in to your tablet?

Are you trying a non 5.0 build? Mine did what yours did and won't build with a 5.0 build. Try a 4.1(?) build and it should eventually boot (after a good while).

I have the same symptoms.
How did you solve it?

dinkmack said:
When trying the button combo to enter recovery have you got the usb cable plugged in to your phone?
Click to expand...
Click to collapse
yes.
If the cable is not connected, the power will not turn on because it is discharged..
Is there a way to solve this problem?

Try connecting it to a PC and use ADB to get into fastboot.

dinkmack said:
Try connecting it to a PC and use ADB to get into fastboot.
Click to expand...
Click to collapse
"Device is now booting." It stops here.
And is not recognized by the PC.
There is no driver problem.
ㅜ..ㅜ

baekidoo said:
"Device is now booting." It stops here.
And is not recognized by the PC.
There is no driver problem.
ㅜ..ㅜ
Click to expand...
Click to collapse
Probably a stupid question but have you tried the button combo to get it into recovery whilst it's connected to the PC? Your PC probably isn't recognising it because it's stuck on device is booting now.

dinkmack said:
Probably a stupid question but have you tried the button combo to get it into recovery whilst it's connected to the PC? Your PC probably isn't recognising it because it's stuck on device is booting now.
Click to expand...
Click to collapse
Volume Up + Power, Volume Down + Power, Volume Up + Power and all combinations.
However, the same screen is repeated.
Recovery mode, fast boot mode, and erase mode can not be entered in any mode.

nostep said:
Probably the only solution is to use an older version of ROM even if for Europe or whatever. Put in dload folder. Follow regular directions for that (two files). Get that older version working. Then unlock bootloader, install TWRP, then try upgrade again. I think I had to install TWRP 5 before it could be used for the upgrade to current ROM (EMUI 5).
Click to expand...
Click to collapse
baekidoo said:
Volume Up + Power, Volume Down + Power, Volume Up + Power and all combinations.
However, the same screen is repeated.
Recovery mode, fast boot mode, and erase mode can not be entered in any mode.
Click to expand...
Click to collapse
You said there isn't a driver problem. Have you installed hisuite?

dinkmack said:
You said there isn't a driver problem. Have you installed hisuite?
Click to expand...
Click to collapse
Yes. The high suit is installed on the PC.
However, it is useless because the PC does not recognize the mediapad.