Database Users

Can't get in clockwork mod help please

Hello friends first of all sorry for my english ( iam still learning ) my problem is i just bought a ideos x5 and i root it. Then i open it with recovery mod and replace clockwork recovery.img with original. But now i cant get it recovery mod i am holding power and volume key appear ideos and its restarting clockwork mod not appearing what can i do to fix this iam really need a custom rom for overclocking.
Regards...

Ok, So what you have to do is download clockwork recovery.img, copy that and replace it on the phone. Boot your phone, hold volume up + power and it will work.
If I were you I would download clockwork again.. probably it is corrupted.

Tcm9669 said:
Ok, So what you have to do is download clockwork recovery.img, copy that and replace it on the phone. Boot your phone, hold volume up + power and it will work.
If I were you I would download clockwork again.. probably it is corrupted.
Click to expand...
Click to collapse
Its my problem. How can i replace recovery.img again i cant reach the cust_backup directory

Please tell us again what you did, your first post does not explain that clearly.
Once again for copying a different recovery.img: Turn off the device; hold both the + and the - buttons and turn it on. Keep holding + and -, wait a few secs until the screen becomes purple. Then plug in the usb-cable.
Does the purple screen show up? Can you start Android with the stock-ROM that is installed now?
If the purple screen shows up and you get stuck there, try it out on another pc.

XphX said:
Please tell us again what you did, your first post does not explain that clearly.
Once again for copying a different recovery.img: Turn off the device; hold both the + and the - buttons and turn it on. Keep holding + and -, wait a few secs until the screen becomes purple. Then plug in the usb-cable.
Does the purple screen show up? Can you start Android with the stock-ROM that is installed now?
If the purple screen shows up and you get stuck there, try it out on another pc.
Click to expand...
Click to collapse
No there is no purple screen because i change original recovery.img with clockwork img. Yes i can start Android with stock rom i cant install new rom because i cant run clockwork mod. I Think my clockwork recovery.img is corrupted or something.

The purple screen should be displayed even if you deleted the recovery.img-file. If you can't reach that screen at all flash an official huawei-ROM, that should bring back the original recovery.img-file.
Please wait for another opinion before you install another ROM.

Yes, when you replace the img.. you will still have the purple screen available!!

[HELP] Restoring of brick Huawei U8800

Restoring of brick Huawei U8800.
All do at your own risk! I am not responsible for your machines!
Today I was able to magically (just wonderful, because it found the time at which there is a chance to run the update) to recovery from a brick Huawei U8800 (corrupted bootloader + recovery not run + in a pink screen not mounted hard drive + when trying to update the written Update failed! I spoke to a service center, they said the warranty is not the case and we must change the motherboard (the cost of 3-4 million BYR, new at the MTS salon cost 2.9 million BYR )
What and how I did:
1) To restore I'am using the firmware B162 Android.
2) Format the micro SD card that was clean (I was 8 gb, 2 class and be sure to FAT 32) and unpack "dload" folder and ".txt" file(with a strange name) from the downloaded archive to sdcard.
P.S. I say that not all flash drives can operate restore, I have like three went, normally only one.
3) Insert the micro SD into the phone and pull out the battery.
4) Hold down the Volume (+) and power up, hold and connect the phone via cable to your PC, your phone will be switched on and the logo appear, then turned off my phone (missing logo). So, when the logo will disappear (ie the phone will turn off) and immediately hold down the volume (-) the volume (+) and power up.Main that the updating process can start only one time after the logo was gone, if after a few times in a row press both the volume keys and power up, updating does not start, it is necessary to re-clamp the volume (+) and the power up, after the disappearance of the logo, both the volume and the power up of ... I have to go to the upgrade process if you wrote "Update failed!", try again (I went with 2 times).
5) After a successful update, the phone will reboot, on reboot he should loaded the standard blue recovery.
6) Turn off the phone from the computer, insert the battery, hold down the volume (-) the volume (+) and turn on, wait until you get a pink screen, release the button and connect it to your computer. You should see a new device and to define a disk drive with a folder "image". If we define - rejoice!) If not, then you need to install the driver on the internet enough to the driver, as well as the wood in my going to the Android SDK, not sure ...
7) Thus, we can assume the phone repaired) Download recovery 4.0.0.5 and unpack the archive and copy the file "recovery.img" to a folder "image" with the replacement. A man does not 4.0.0.5 recovery loaded, it is strange, but recovery 5.0.2.7 normally loaded
8.) Disconnect the phone from the computer, pull out / insert the battery and try to enter the recovery (volume (+) and power up).
9) If set, then everything is OK and can now be sewing. I still put 2.2 Geno v8.4 + software package from Google, but I recommend again read all instructions on the firmware, to avoid problems!
Good luck, hope that helped someone, he sat on the forums more than one day, but have not found a solution.
If someone has turned out, a sign of gratitude you can throw money on my phone +375297176005 (MTS, Belarus), would be very grateful
P.S.
Instructions is my and it's my first, that do not copy and paste, you can search the Internet. Do not judge strictly, if something is not designed ...
If there are people who helped, I think you can throw his hat in the description. My message is also present in our 4pda.
Hope springs eternal
Sorry for my english, I'm from Belarus and bad know it

Before the restoration, can you open your phone? Mine was completly down. I can't power on or go to recovery or install any official roms.

Özgürce said:
Before the restoration, can you open your phone? Mine was completly down. I can't power on or go to recovery or install any official roms.
Click to expand...
Click to collapse
my phone is also not included, only in
a pink boot screen, but on the computer the drive was
not detected

Please, if someone came to restore, write

greeshan said:
Please, if someone came to restore, write
Click to expand...
Click to collapse
omg, this looks so sad, I guess we are in the same page. BRICK phone. no power, no screen no nothing... well, actually no, it vibrates when battery is inserted or cable is connected, but, other than that, niente.

I had follow all ur instruction but when i press volume up + power with usb connected it goes to the CWM...so i just press vol up + down + power...It goes PINK SCREEN...Any more solution please?

i did it! but after 5 times i see this message: "update failed"

i have the same problem

r0y123 said:
i have the same problem
Click to expand...
Click to collapse
Hello, I have a problem after changing recovery.img. Now after power on only error message: Image signature verify fail. Your boot/recovery image may have an incorrect signature. Please update your image to a signature official one. You can remove battery for power down.
When I get to pink screen - no disk appears in my PC. Please, what can I do now?

greeshan said:
Please, if someone came to restore, write
Click to expand...
Click to collapse
My update process stops at 1/4 of the bar.What can i do?

greeshan said:
my phone is also not included, only in
a pink boot screen, but on the computer the drive was
not detected
Click to expand...
Click to collapse
Just thought I would mention it, if you connect the pink screen to Ubuntu/Linux, it will most likely mount.

Just tried this recovery method on a bricked U8800. Didn't do anything at all. Must admit that it was bricked in a way that i didn't see anything at all on the screen. Neither did i notice anything in dmesg on a linux machine.

Help
Hello.my huawei u8800pro v.2.3.5 brick after install official ice cream sandwich.I followed the procedure and now I have a new removable but I can't go to recovery mode!!can I install a new rom?

[Q] Hard Brick - Phone Dosn't turns on

Hello Guys!
My girlfriend's brother bricked me girl's U8800, and now i'm trying to solve the problem.
I searched all the forum for someone with the same problem, but i couldn't find one with the same problem.
The phone absolutely dosn't turn on, not even a logo, screen brightness, pink/blue screen, nothing.
Does someone have a possible solution for that (I am thinking in pushing the sistem over ADB, but dont know how), or the phone is dead?

Hi, you can try pull out the battery and connect the phone to pc via usb. maybe phone turn on.
sorry for my bad english.

Not dead!!! download b518 gb or froyo stock rom. extract zip or rar. "dload" put mount sdcard. pres volume down volume up power key automatic install. you must flash custom roms because have touch screen issue.FOR B518 Gingerbread: download u8800 usb driver in computer and install driver. download 5.5.0.4 recovery.img from computer 1 out sdcard. 2 out battery, again put battery.now again pres volume down volume up power key for pink screen. Usb capable put computer and put u8800. on computer move recovery.img put folders in "cust-backup". out usb capable. again out battery and put battery.now pres volume up and power button for recovery screen. again put sdcard. copy custom roms in sd card. yeah now you can flash custom roms
sorry for my bad english

cobramax said:
Not dead!!! download b518 gb or froyo stock rom. extract zip or rar. "dload" put mount sdcard. pres volume down volume up power key automatic install. you must flash custom roms because have touch screen issue.FOR B518 Gingerbread: download u8800 usb driver in computer and install driver. download 5.5.0.4 recovery.img from computer 1 out sdcard. 2 out battery, again put battery.now again pres volume down volume up power key for pink screen. Usb capable put computer and put u8800. on computer move recovery.img put folders in "cust-backup". out usb capable. again out battery and put battery.now pres volume up and power button for recovery screen. again put sdcard. copy custom roms in sd card. yeah now you can flash custom roms
sorry for my bad english
Click to expand...
Click to collapse
The phone absolutely dosn't turn on

Ax1qwer said:
The phone absolutely dosn't turn on
Click to expand...
Click to collapse
Hmmmm jtag required or usb jıg

maybe this help you : http://forum.xda-developers.com/showthread.php?t=1705996

So could anyone recover their phones from hard brick?

luis_decker said:
Hello Guys!
My girlfriend's brother bricked me girl's U8800, and now i'm trying to solve the problem.
I searched all the forum for someone with the same problem, but i couldn't find one with the same problem.
The phone absolutely dosn't turn on, not even a logo, screen brightness, pink/blue screen, nothing.
Does someone have a possible solution for that (I am thinking in pushing the sistem over ADB, but dont know how), or the phone is dead?
Click to expand...
Click to collapse
It seemed perfectly dead.
How about consult to huawai or buy newer one.

[Q] Unbricking Zte Blade 3

First of all thanks for not caring. I spend days on Internet trying to find a solution. I have Blade which I bricked thanks to my noob skills with flashing and similiar ****. I just want my normal phone back. Couldn't give a **** bout roms anymore. Sorry for the lang but Im mad. When I boot it up it just sits there on green android logo not going past. I can enter download mode if it matters. As soon as I back it up Im getting rid of cwm mode and bull****. I use my sister phone to transfer files on my sd card. I cant enter my recovery mode since I installed that **** of cwm.When I try the key combo-android logo stuck with red light on. My phone has 90-100% battery Im sure. I need a solution where I can do something from pc with download mode or something that will automatecly start when I boot up my phone that I transfered on my SD card. Please guys let me have some sleep. I've been staying all night long just to unbrick it. Dont mention any flashing rooting ****ing...I developed alergy to those words. I want it simple ..please...any help is appreciated. And sorry for my language.

Solution.
I Love The Register Video said:
First of all thanks for not caring. I spend days on Internet trying to find a solution. I have Blade which I bricked thanks to my noob skills with flashing and similiar ****. I just want my normal phone back. Couldn't give a **** bout roms anymore. Sorry for the lang but Im mad. When I boot it up it just sits there on green android logo not going past. I can enter download mode if it matters. As soon as I back it up Im getting rid of cwm mode and bull****. I use my sister phone to transfer files on my sd card. I cant enter my recovery mode since I installed that **** of cwm.When I try the key combo-android logo stuck with red light on. My phone has 90-100% battery Im sure. I need a solution where I can do something from pc with download mode or something that will automatecly start when I boot up my phone that I transfered on my SD card. Please guys let me have some sleep. I've been staying all night long just to unbrick it. Dont mention any flashing rooting ****ing...I developed alergy to those words. I want it simple ..please...any help is appreciated. And sorry for my language.
Click to expand...
Click to collapse
Calm down dude. If you can get in Download Mode , you are lucky. I even know people who had not get to Download Mode and had began to cry , cause the phones were only 3-4 Weeks old. Back to your problem.]First download here the stock rom.[/URL]
Then you need the Android SDK and the platform-tools from Google , so download it , cause you need ADB. Click here to get Android SDK.Then you need the ZTE drivers. Click here to get the drivers.Now get into download mode and connect the device via USB to your PC. Copy the boot.img (or recovery.img if it is in the ZIP package) and flash it via Fastboot (command: fastboot recovery.img) . Now you got the stock recovery. Now push the FULL update.zip at your sdcard , and now go to recovery , and update from sdcard , choose the update.zip ... Flashing takes a while. DO NOT WIPE ANYTHING BEFORE OR AFTER CHOOSING "UPDATE.ZIP" . Now your Phone should fully works normally

Hello, I have also bricked ZTE BLADE 3(I flashed a wrong kernel....). It only turns the red light on when i turn it on and blank screen, does not respond to vol + and vol - key, no android logo, but when I connect it to the computer via usb in Device Manager a COM port opens with the name ZTE DFU(Diagnostic interface). If anyone has experience of reviving this device from this mess? Thank you for your time

Zmaj5 said:
Hello, I have also bricked ZTE BLADE 3(I flashed a wrong kernel....). It only turns the red light on when i turn it on and blank screen, does not respond to vol + and vol - key, no android logo, but when I connect it to the computer via usb in Device Manager a COM port opens with the name ZTE DFU(Diagnostic interface). If anyone has experience of reviving this device from this mess? Thank you for your time
Click to expand...
Click to collapse
Your download screen is destroyed , but you are still able to get into it.
Try to get into it and flash the kernel with fastboot , the screen will bug during fastboot procedure.

My screen is completely blank and black, just the red light showing when i turn it on and it is always on. It does not respond on power button + vol. down, power button + vol. up, power button + vol. down + vol. up. When I connect it to the computer it does not show me a usb flash drive although I have the zte drivers installed and another sd card inside, but in Device Manager I can see it as a COM port(DFU) Diagnostic Interface. I tried accessing the bootloader via adb but it doesnt even list it with command "adb devices". I also tried flashing the recovery image via "fastboot recovery recovery.img" and "fastboot recovery.img" and still no luck, it just hangs at "waiting for device"...

Zmaj5 said:
My screen is completely blank and black, just the red light showing when i turn it on and it is always on. It does not respond on power button + vol. down, power button + vol. up, power button + vol. down + vol. up. When I connect it to the computer it does not show me a usb flash drive although I have the zte drivers installed and another sd card inside, but in Device Manager I can see it as a COM port(DFU) Diagnostic Interface. I tried accessing the bootloader via adb but it doesnt even list it with command "adb devices". I also tried flashing the recovery image via "fastboot recovery recovery.img" and "fastboot recovery.img" and still no luck, it just hangs at "waiting for device"...
Click to expand...
Click to collapse
When the red light still comes up , you still got chances to get it fixed...

I think so too.. but how? The only method left is JTAG... I saw a thread about using a TPT image to flash low level firmware using ZTEflash.exe but that thread was for ZTE Skate I think, I could not find the tpt.img file for zte blade 3.... Is there any other method via usb cable? Or send it to the shop?

Well, here is my situation:
Got a BLADE III Pro
Tried to root it and i played with few tools found on xda and other places (android forums). No luck at all. Tried to flash a CWM and NO LUCK neither. Tried to go back to flash stock CWM (as i was afraid of bricking it), searched for stock cwm and there is my BRICKED phone. When trying to hold volume down and power botton (both for over 20 seconds even) it will show a green android and its stuck there for hours. When trying to go to fast boot mode the same happens (with volume up and power botton).
While trying these two options the PC (Windows 7 64 bit) wont recognize the phone pluged in.
The only way the PC makes a sound is when i hold both volume up and down bottons and power it or plug it in the PC (without the battery even).
I need to know how can i fix it to boot only. PLEASE. Is this a "throw on can" phone now or it can be brought to life? PLEASE TELL ME PEOPLE.
pm me or any info as soon as you guys can.
I will respond to any question you might have.
Thank you in advance.

I have sent my phone to the shop and they said that they would need a jtag box specific for this model or a new motherboard for zte blade 3.... I think this the end for my zte blade 3

P8Lite HARD BRICKED

Hi, I hope I can explain as clearly as I can...
I used Huawei Update Extractor Tool in order to get all those .img files so I can flash them via Fastboot. Everything was cool until I used the feature to make an "update.zip" file with the .img that I wanted to Flash. I flashed it via TWRP and then it didn't reboot at all... I tried to turn it up but even the screen is not turned on. I have no red or green led as the others threads says (yes I've read a lot of them). The only sign of life is that my PC detects it as "Fastboot2.0" and it's supposed that I flash cust, boot, system and recovery imgs but nothing happens at all. It sounds it's rebooting and the cmd also says that but there is no change.
What can I do?

kreiger_reichwarz said:
Hi, I hope I can explain as clearly as I can...
I used Huawei Update Extractor Tool in order to get all those .img files so I can flash them via Fastboot. Everything was cool until I used the feature to make an "update.zip" file with the .img that I wanted to Flash. I flashed it via TWRP and then it didn't reboot at all... I tried to turn it up but even the screen is not turned on. I have no red or green led as the others threads says (yes I've read a lot of them). The only sign of life is that my PC detects it as "Fastboot2.0" and it's supposed that I flash cust, boot, system and recovery imgs but nothing happens at all. It sounds it's rebooting and the cmd also says that but there is no change.
What can I do?
Click to expand...
Click to collapse
Flash UPDATE.APP by force upgrade....if it helps hit the thanks button

HaiderHady said:
Flash UPDATE.APP by force upgrade....if it helps hit the thanks button
Click to expand...
Click to collapse
Force Upgrade? The problem is that my phone is not even turning on. It's like it was turned off but it's recognized as a fastboot device by my PC.

Can you press power button until you get a vibration and post feedback?
Can you try to turn the phone off and boot to fastboot(pressing vol - while inserting usb cable connected to a pc)?
Can you press all 3 buttons until it reboots and when you feel the vibration, wait 2 sec and see if it reboots to recovery?

myclarity said:
Can you press power button until you get a vibration and post feedback?
Can you try to turn the phone off and boot to fastboot(pressing vol - while inserting usb cable connected to a pc)?
Can you press all 3 buttons until it reboots and when you feel the vibration, wait 2 sec and see if it reboots to recovery?
Click to expand...
Click to collapse
The only feedback that I have is the PC recognized that is rebooting again in fastboot mode, but the phone physically has no reaction (no turning on). :/

Does it get detected by fastboot? (fastboot devices)

myclarity said:
Does it get detected by fastboot? (fastboot devices)
Click to expand...
Click to collapse
Yes, my PC detects it. Also, after flashing cust, boot, cache, system, userdata, recovery and recovery2 partitions, the only thing that I made is to turn on the red led blink but only red led but still no vibration or screen.

Noch Backup Done before start flashing?
Gesendet von meinem ALE-L21 mit Tapatalk

make folder "dload" on the sd card, put update.app there, then hold vol+ vol- and power in the same time. It should install the update from the sd card

blewko said:
make folder "dload" on the sd card, put update.app there, then hold vol+ vol- and power in the same time. It should install the update from the sd card
Click to expand...
Click to collapse
where to get update.app??