Hi,
When I insert the USB to upgrade the rom, the software doesnt recognize the universal but windows does, it recognize a usb pocket pc but i cant seem to find the drivers, ive been searching everywhere with no success, anyone could give me link or send it by email ?
With this driver would the Ranjus 7.4 upgrade recognize the Universal ??
Thanks.
Hi all,
I've searched the forums (honestly), but I can't find an answer to my problem.
I have a Vodafone branded 32B phone.
I installed the AndroidSDK as supposed to, added the path, made the phone root, booted into the recovery console using fastboot and flashed my phone with different operating systems... but during all this time I hever got ADB to work.
Whatever I do, adb never finds the phone. Fastboot works and finds it, when it's in fastboot mode, but ADB never. So, I can't permanently install the recovery console nor do any of the other funky stuff.
ADB doesn't work when the phone is in fastboot mode nor normally operating. I have USB Debugging turned on. The phone works normally and I can access the SDCard just fine.
Any help?
Suggestion.
Look into purchasing a G1 to be kept as a spare and used for development. That's what I've done with my G1. GParted is within most recovery images nowadays, therefore you can do most anything there, well...important functions that is. Keep that in mind.
You might need to uninstall the driver that recognizes your phone, then manually install the updated driver.
Reignzone said:
You might need to uninstall the driver that recognizes your phone, then manually install the updated driver.
Click to expand...
Click to collapse
that's what i had to do to get it to recognise my phone.
i'm pretty sure the driver came with SDK. either way i've attached the one i used.
go into device manager and update the driver it's currently using with the attached one.
Incorrect driver.
It should be the 1st driver listed in the Android SDK file.
As far as I know, you could also choose to push ADB to your system32 file folder under the C: drive in your computer. That is if you're using a Windows machine.
just a thought
Are you on windows or linux? If you're in ubuntu try sudo adb ... the default unprivilaged user doesnt automatically have access to the device.
If you're in Windows I would uninstall the Android Phone device in device manager and reboot with the phone disconnected. Then connect it and install the usb driver from the sdk when prompted. Might also pay to download the sdk again.
Install HTC Sync
Another known way to fix the issue is to download and install HTC Sync http://www.htc.com/au/SupportViewNews.aspx?dl_id=573&news_id=169
This seems to install the correct drivers
For more info check the Wiki:
http://wiki.xda-developers.com/index.php?pagename=HTC_Sapphire_Hacking#sec02
Hey Guys,
Forgot to mention I'm on Windows Vista 64 bits.
That last suggestion did the trick. I went to the site and downloaded the HTCDriverUpdate_Vista_64bits.exe, and within seconds I had an ADB connection.
Thanks for your help!
when i put the phone on my laptop its not showing, i picked storage or photo but its not showing any folder, nothing in my pc. Windows 10
It was working for about 5 min then it stoped again
Sorry if its been asked loads
Cheers guys
Drivers. Check different ports. Restart computer and phone. Make sure usb debugging is on. Basically troubleshoot.
Still not working, my nexus 6 works fine....
Is there a driver just for this phone or do you mean adb ? I just use the google universal drivers.
Can you link me to any other pages that might help please
Thanks
only works when i enable development mode
did you install Google Android SDK? i suggest install that, which wil solve most driver issues
Hello!
Please advise, I really don't know what to do with it anymore ...
Every ROM with Android 10, including Crdroid, Pixel Experience etc ... as soon as I upload it to the Mi A1, then (after normal first start and boot) I connect the USB cable and choose "USB transfer files", so it just doesn't appear on a Windows PC and I cannot transfer anything. As if the phone was just unplugged, it's just charging USB tethering works. Direct selection of "USB file transfer" in the developer options won't help either. Where's the problem? Once I get back to Android 9 (Any... Stock and AOSP), everything is fine.
I flash the ROM normally. Starting from STOCK, unlock the original bootloader, load TWRP, delete DATA, SYSTEM, INTERNAL, DALVIK, flash ROM, then GAPPS (eventually) and then restart...
I really don't know where the problem is when nobody reports anything like that here
neobit78 said:
Hello!
Please advise, I really don't know what to do with it anymore ...
Every ROM with Android 10, including Crdroid, Pixel Experience etc ... as soon as I upload it to the Mi A1, then (after normal first start and boot) I connect the USB cable and choose "USB transfer files", so it just doesn't appear on a Windows PC and I cannot transfer anything. As if the phone was just unplugged, it's just charging USB tethering works. Direct selection of "USB file transfer" in the developer options won't help either. Where's the problem? Once I get back to Android 9 (Any... Stock and AOSP), everything is fine.
I flash the ROM normally. Starting from STOCK, unlock the original bootloader, load TWRP, delete DATA, SYSTEM, INTERNAL, DALVIK, flash ROM, then GAPPS (eventually) and then restart...
I really don't know where the problem is when nobody reports anything like that here
Click to expand...
Click to collapse
? Might be something to do with the usb driver(s) on your pc. Also if you can't get it to work then try FTP as that's an alternative. See if you can transfer files via usb when you boot into recovery (twrp etc). Have you tried Derpfest ROM? That ROM might work for it. Just a few possibilities lol
I don't assume that it would be a USB driver, because the same phone with Android 9 works normally. And to replace the direct connection via USB by FTP connection? I don't think about it for a second Maybe when I'm in a bit of a mood I'll try another ROM and maybe I'll be lucky...
I'm rather surprised that no one has a similar problem and I would just like to solve it
Anyway, thanks for trying to help me
Hi,
Try flashing latest firmware. For me personally, New USB Cable solved it
---------- Post added at 03:05 PM ---------- Previous post was at 03:04 PM ----------
On the other hand, you can always use something Like mixplorer with ftp or HTTP server
I'm calling off my problem!
It was really enough to completely remove the existing drivers and let Windows do its job and install them again.
I'm sorry, I'm sorry, I'm sorry!
This should happen to newbies only! Unfortunately, I made it very complicated IN MY HEAD and I didn't think clearly
I apologize to everyone!
It is a problem with the drivers, it does not matter what ROM you use or if you have Android 9 or 10. You have to enter the Windows task manager, put the mobile in file transfer mode and delete Google driver by uninstalling the device from the system, just delete that driver and re-target your Mi A1 to PC. Windows will install the correct driver.
In Windows 10,go to Device manager & uninstall Google nexus device.then plug your phone.Storage working well
dilupalakmal said:
In Windows 10,go to Device manager & uninstall Google nexus device.then plug your phone.Storage working well
Click to expand...
Click to collapse
I solved the problem with your directions. Thanks!
neobit78 said:
I'm calling off my problem!
It was really enough to completely remove the existing drivers and let Windows do its job and install them again.
I'm sorry, I'm sorry, I'm sorry!
This should happen to newbies only! Unfortunately, I made it very complicated IN MY HEAD and I didn't think clearly
I apologize to everyone!
Click to expand...
Click to collapse
Same trouble, can you send screenshoot device manager, i dont know what driver must be I update
Roober_4 said:
It is a problem with the drivers, it does not matter what ROM you use or if you have Android 9 or 10. You have to enter the Windows task manager, put the mobile in file transfer mode and delete Google driver by uninstalling the device from the system, just delete that driver and re-target your Mi A1 to PC. Windows will install the correct driver.
Click to expand...
Click to collapse
You are a life saver! I spent an entire night re-flashing ROM and troubleshooting but this solved the problem. Thanks!!!
dilupalakmal said:
In Windows 10,go to Device manager & uninstall Google nexus device.then plug your phone.Storage working well
Click to expand...
Click to collapse
You Are Awesome !! Your suggestion helped me too !!
Removed the Nexus in Device Manager and reconnected the USB cable .. This pushed my Google Pixel device into USB File Transfer mode.
Roober_4 said:
It is a problem with the drivers, it does not matter what ROM you use or if you have Android 9 or 10. You have to enter the Windows task manager, put the mobile in file transfer mode and delete Google driver by uninstalling the device from the system, just delete that driver and re-target your Mi A1 to PC. Windows will install the correct driver.
Click to expand...
Click to collapse
thanx for your suggestion thats really work , or there is no problem in pixel rom
I am trying to downgrade my Nokia 5 to android 7.1. Currently, it's running on android 9. I tried this method.
https://forum.xda-developers.com/t/...oreo-to-nougat-for-bootloader-unlock.3893053/
But Windows PowerShell was unable to detect any device. So, then I searched and installed some drivers like these
But no work.
Then I found a solution in here
nokia phone not detected using adb via windows PC
I have connected Nokia 1 TA-1066 phone to windows PC via USB cable after enabling USB debugging in setting->System->Developer Options. on the command prompt, I am unable to get the device after executing #adb devices. Do I need any specific...
forum.xda-developers.com
But there is no option called audio source, so I selected MIDI, also no work and platform-tool windows link is not working, so I searched google and downloaded this https://developer.android.com/studio/releases/platform-tools, and it didn't work either.
All after this, something came to my mind.
Does Nokia 5 needs an unlocked bootloader to do the downgrading process?
Otherwise, Is there another way to do this? Like I saw on YouTube, someone is using ntool to do the process, but I don't know is it safe or not.
And what could be wrong with ADB? Why it's not detecting my phone?
Thanks
—Nihad