Hi,
When I insert the USB to upgrade the rom, the software doesnt recognize the universal but windows does, it recognize a usb pocket pc but i cant seem to find the drivers, ive been searching everywhere with no success, anyone could give me link or send it by email ?
With this driver would the Ranjus 7.4 upgrade recognize the Universal ??
Thanks.
Related
HELP!
I'm a new to PPC. I've got an O2 mini, I charged the device well just now, but now when I connect the device to my computer, always says that the USB device is not operating well and windows can't recognize the device. Is there anyone could let show me what's wrong? what should I do? Thanks!!!!!
Hello,
Are you sure you have installed Active sync in your Desktop?
Regards
Carty..
Is your USB cable plugged into a front USB port on your computer??
If so, try plugging it into the back. Some front USB ports do not have enough power to recognize the MDA Compact, and you get that same "USB not recognized" error. Most back USB ports are powerful enough.
uninstall activesync ... reboot system install again ! should work
the comupter may of just seen the modem side of it it happened to me you need to go into your hardware file on your pc and delete any modems you don't recogonize (carefull you don't delete the wrong one (i exepct no responsibility if you do)) and then re install active sync v 4.1 fom microsoft site. then plug it in again good luck
Thanks all you guys. I have got this problem resolved. There is sth wrong with my cable and I have bought a new one. Noe everything is going well.
am a newbie i just bought a qtek s200 but i didnt find its CDrom included and everytime i connect it to my Pc it asks for the device driver....where can i download the drivers from ?
You should download ActiveSync from Microsoft.com, install it, then plug in your phone. Windows will then automatically install the necessary drivers.
Good luck.
I had the same problem with a normal USB cable.
I lost my cable and the sync does not work with a normal cable ??
Do you have a origional cable ?
it worked thank you
HTC USB Modem driver
ActiveSysnc software is useless, when you need to use your phone as GSM(GPRS) modem via USB connection! I couldn't find out "HTC USB Modem driver". Maybe because I didn't know, what I'm looking for, till i found it.
Anyway here's link http(Colon)//uloz(dot)to/3934398/gsm-usb-modem.zip*
*only address, i'm not permitted to post links yet
Would it be possible to re-flash a universal on a different computer if it failed on a pc with vista on it? i got error 101 on the pc with vista.
I'll be attempting the same rom-flash on pc with xp on it. The problem is that activesync doe not find the xda. The xda just shows usb v1.00 and serial when i disconnect the usb.
Any help would be appricated
Open your device in Bootloader mode,
Connect it via USB,
Open the ROM uploader exe,
Click next....
It won't be a problem, i think. It should work anywhere, not on just vista or xp..
I dont get a usb connection to my omnia 7
I tried it on 3 pcs 1 with 64bit 2 with 32bit and all usb ports
On all pcs I installed the usb driver
All pcs recognize my phone but the software gives this error:
[Error Description]:
Please make sure that your device is connected to your computer.
also make sure that right drivers are installed (SAMSUNG_USB_Driver_for_Mobile_Phones.exe)
Try to connect device to different USB port and also you can try to reboot PC.
Also you can try to exclude USB hubs.
[Info]: USBWorkDMLI_SAM.cpp (173)
anyone knows what i am doing wrong ?
regards chris
Hi,
I have exactly the same problem as chris1005, with an Omnia 7.
I strictly followed the instructions to install Magldr:
1) Installing Usb Samsung Drivers
2) Put my phone in download mode
3) Connect it to my pc
4) Launch "DMLI for Samsung V1"
And when i reach the "Connect" step, i get the "173" error (view attachment).
I run on a Win7 x64, my phone is developer unlock.
Thanks for the answers
I had the same problem, but it was solved when I used a USB port on the back (connected to the motherboard) instead of one on the front (connected trough a hub).
Hi,
Thanks for your response, but i tried this method, it doesn't work too, whether the usb on motherboard or the usb hub.
:/.
I don't know where this is blocking.
Is there any other solution to flash a rom on an Omnia 7 than the DFT solution ?
Thanks.
I flashed back from 7.8 to 7.5 and had the same problem again, but ater I rebooted my computer, it worked.
Try to follow this: http://windowsphonehacker.com/articles/tutorial_how_to_install_magldr_and_custom_roms_on_samsung_devices-02-08-12
NdotGdot said:
I had the same problem, but it was solved when I used a USB port on the back (connected to the motherboard) instead of one on the front (connected trough a hub).
Click to expand...
Click to collapse
I tried every usb port on my Pc still doesnt work
tried everything mentioned on xda dev about the problems with the magldr
regards chris
Am trying to get my printer to recognise my phone as a usb flash drive. The printer recognises a usb device is connected but doesn't recognise the phone, as Samsung phones seem to need dedicated drivers.
Is there anyway to add files to root of phone so a section of its memory could be used as plug and play flash drive.
.
I have the same problem on my windows xp system. It recognises it as a MTP device but doesn't find any drivers for it.
Anyone got a solution ?
Think these are drivers https://www.dropbox.com/s/xlml5e62um56qmd/SAMSUNG_USB_Driver_for_Mobile_Phones.exe?dl=0 if not just install kies