So I've spent a good hour searching these threads, and I still can't clear this up. Some people are saying the Verizon HTC 10 doesn't have band 12 at all. Others are saying it does, you just have to s-off to use it. Will my plan enable full compatibility with T-Mobile?
Here's my game plan:
Buy the HTC 10 on Craigslist
Downgrade if needed
Read this thread and hopefully figure out how to s-off with sunshine
Follow these instructions to change the CID
Download the TMUS firmware from the "No Wipe" category of this list, which I conveniently found on this forum that clearly says no CDMA devices
Leave the radios alone, since the firmware from above already contains the TMUS radios?
Reboot and cross my fingers?
Thanks everyone!
I'd just convert to us unlocked
Convertng to US Unlocked is the way to go. Works on ATT. Should work with T-Mobile
Sent from my HTC 10 using Tapatalk
Vindicated777 said:
Convertng to US Unlocked is the way to go. Works on ATT. Should work with T-Mobile
Sent from my HTC 10 using Tapatalk
Click to expand...
Click to collapse
aer0zer0 said:
I'd just convert to us unlocked
Click to expand...
Click to collapse
Which RUU did you use? I got mine directly from HTC's website (2.28.617.8) and received error 158. Any tips?
Edit: Also my phone is in the update mode with the picture of the phone and a green circle.... I'm afraid to power off
Also some more info - I was on 1.85.605.9 and downgraded to 1.85.605.8. Then, I used SunShine and got S-off with unlocked bootloader. Next, I tried installing HTC's RUU, which failed.
My plan was to install twrp and supersu after getting the unlocked RUU, but now I'm just stuck.
Thanks in advance
https://forum.xda-developers.com/showpost.php?p=70104011&postcount=3
I wrote this, this will work, just take the OTAs until you get to 2.41
@kmpham1
aer0zer0 said:
https://forum.xda-developers.com/showpost.php?p=70104011&postcount=3
I wrote this, this will work, just take the OTAs until you get to 2.41
@kmpham1
Click to expand...
Click to collapse
Hey! That's the exact post I was following along! Didn't even make the connection - thanks for your help so far. Anyway, I followed your guide until the part you said to download that RUU. I'm on 1.85.605.8, and the one in your link is 1.80.617.1. I was like...ehh better not downgrade, so I used the one from HTC's website. HTC actually gave me a warning (before it died) and said make sure you're updating to an equal or higher firmware. Should I be concerned about using an older one?
Also, flash twrp and supersu before or after receiving otas?
Again, thanks so much for your help! I'm trying my best to search the forums and not ask redundant questions!
aer0zer0 said:
I'd just convert to us unlocked
Click to expand...
Click to collapse
If your SOFF, it doesn't matter. It won't error out
aer0zer0 said:
If your SOFF, it doesn't matter. It won't error out
Click to expand...
Click to collapse
Beautiful! And last question, I (mostly) promise... should I flash twrp and supersu before or after otas?
kmpham1 said:
Beautiful! And last question, I (mostly) promise... should I flash twrp and supersu before or after otas?
Click to expand...
Click to collapse
After, get where you need to be first
aer0zer0 said:
After, get where you need to be first
Click to expand...
Click to collapse
It says my device is property of HTC during setup :laugh:
Software updates are downloading though! Thanks again.
kmpham1 said:
It says my device is property of HTC during setup :laugh:
Software updates are downloading though! Thanks again.
Click to expand...
Click to collapse
Gonna be a few, camp out for a couple hours
---------- Post added at 03:46 AM ---------- Previous post was at 03:44 AM ----------
kmpham1 said:
It says my device is property of HTC during setup :laugh:
Software updates are downloading though! Thanks again.
Click to expand...
Click to collapse
Also, use magisk instead of supersu you will be able to keep safety
Net passing, and snapchat, plus get root and all the goodies. You will need a custom kernel though
aer0zer0 said:
Gonna be a few, camp out for a couple hours
---------- Post added at 03:46 AM ---------- Previous post was at 03:44 AM ----------
Also, use magisk instead of supersu you will be able to keep safety
Net passing, and snapchat, plus get root and all the goodies. You will need a custom kernel though
Click to expand...
Click to collapse
Uh oh....first ota didn't work. I attached the error.
Any kernel recommendations? I'll take it from the expert lol
Factory reset then try, it maybe bothered from original nougat attempt
---------- Post added at 03:55 AM ---------- Previous post was at 03:53 AM ----------
aer0zer0 said:
Factory reset then try, it maybe bothered from original nougat attempt
Click to expand...
Click to collapse
Actually, I would install twrp, wipe everything, format data, then re-run the ruu
aer0zer0 said:
Factory reset then try, it maybe bothered from original nougat attempt
---------- Post added at 03:55 AM ---------- Previous post was at 03:53 AM ----------
Actually, I would install twrp, wipe everything, format data, then re-run the ruu
Click to expand...
Click to collapse
I just did a plain ol factory reset, but if that still doesn't work, I'll try twrp. Here's the screenshot about the test device message... you think that has anything to do with it?
kmpham1 said:
I just did a plain ol factory reset, but if that still doesn't work, I'll try twrp. Here's the screenshot about the test device message... you think that has anything to do with it?
Click to expand...
Click to collapse
Nah, they are all like that once soff
aer0zer0 said:
Factory reset then try, it maybe bothered from original nougat attempt
---------- Post added at 03:55 AM ---------- Previous post was at 03:53 AM ----------
Actually, I would install twrp, wipe everything, format data, then re-run the ruu
Click to expand...
Click to collapse
Okay so I'm asking cause better safe than sorry. When you say wipe everything... is that the normal data, cahche, and dalvik? Or am I wiping system also cause that's like... woah don't normally touch that lol
System, data, cache, internal SD....basically everything but your external SD. Once wiped, go back to the format data option. Type yes, then reboot to download mode. Run your run from there
aer0zer0 said:
System, data, cache, internal SD....basically everything but your external SD. Once wiped, go back to the format data option. Type yes, then reboot to download mode. Run your run from there
Click to expand...
Click to collapse
So I did that and I got the same error as before (error 158), but this time with the older RUU. No clue what to do now, especially cause I wiped system...
kmpham1 said:
So I did that and I got the same error as before (error 158), but this time with the older RUU. No clue what to do now, especially cause I wiped system...
Click to expand...
Click to collapse
Did you try the new one?
---------- Post added at 05:01 AM ---------- Previous post was at 04:57 AM ----------
kmpham1 said:
So I did that and I got the same error as before (error 158), but this time with the older RUU. No clue what to do now, especially cause I wiped system...
Click to expand...
Click to collapse
Are you bootloader locked?
Related
Sorry to bother everyone, but I am in a really sticky situation here. I don't know much about rooting and recovery, and have run into a real issue, so I will try to explain as best I can. I rooted my phone no problem and installed a custom recovery that didn't work at all, so I left it and forgot about it. Today, I tried to update my phone but when it rebooted I simply got the message: [830] Fastboot mode started then below it says: [830]udc_start() and will not advance. I cannot do anything with the phone when I plug it in nor can I access any of the files aw it doesn't seem to be recognized, and when I boot into recovery I just get the screen with the same message. I tried putting it into download mode, but it just said 0% and no messages about drivers or anything popped up onto my screen. I am in a real pinch here fellas, and I really hope you guys can help me out. Thank you all in advance.
jpbhello said:
Sorry to bother everyone, but I am in a really sticky situation here. I don't know much about rooting and recovery, and have run into a real issue, so I will try to explain as best I can. I rooted my phone no problem and installed a custom recovery that didn't work at all, so I left it and forgot about it. Today, I tried to update my phone but when it rebooted I simply got the message: [830] Fastboot mode started then below it says: [830]udc_start() and will not advance. I cannot do anything with the phone when I plug it in nor can I access any of the files aw it doesn't seem to be recognized, and when I boot into recovery I just get the screen with the same message. I tried putting it into download mode, but it just said 0% and no messages about drivers or anything popped up onto my screen. I am in a real pinch here fellas, and I really hope you guys can help me out. Thank you all in advance.
Click to expand...
Click to collapse
Just hold the power button for 10-15 seconds and it will reboot.
heroforme said:
Just hold the power button for 10-15 seconds and it will reboot.
Click to expand...
Click to collapse
When I make it reboot I just get the same screen.
jpbhello said:
When I make it reboot I just get the same screen.
Click to expand...
Click to collapse
Google search lg stock ROM xda and follow the steps.. Been there done that
joewaz said:
Google search lg stock ROM xda and follow the steps.. Been there done that
Click to expand...
Click to collapse
I can't boot into recovery though, which every guide I find has me do, and putting it into download mode doesn't work. It isn't recognized on my computer either.
jpbhello said:
I can't boot into recovery though, which every guide I find has me do, and putting it into download mode doesn't work. It isn't recognized on my computer either.
Click to expand...
Click to collapse
You have to read carefully.. Do as it says.. It works.. You have to download the right drivers and then get it in download mode and then flash stock rom... I don't have the time to tell you every step but that's what needs to be done
---------- Post added at 06:58 PM ---------- Previous post was at 06:57 PM ----------
jpbhello said:
I can't boot into recovery though, which every guide I find has me do, and putting it into download mode doesn't work. It isn't recognized on my computer either.
Click to expand...
Click to collapse
Here's the link.. That's all I got time for.http://forum.xda-developers.com/showthread.php?t=2432476
Here are a few screenshots that can help you guys identify the issue. First is a screenshot of the lg support tool, which recognizes my phone as a "testmodel"
The next is an image of what happens when I try to upgrade recovery.
Also, the lg mobile support tool doesn't even have the ls980 drivers. Can anyone give me instructions on where to go from here?
joewaz said:
You have to read carefully.. Do as it says.. It works.. You have to download the right drivers and then get it in download mode and then flash stock rom... I don't have the time to tell you every step but that's what needs to be done
---------- Post added at 06:58 PM ---------- Previous post was at 06:57 PM ----------
Here's the link.. That's all I got time for.http://forum.xda-developers.com/showthread.php?t=2432476
Click to expand...
Click to collapse
I've tried that guide already, but I get stuck right here, as it says the process failed.
jpbhello said:
I've tried that guide already, but I get stuck right here, as it says the process failed.
Click to expand...
Click to collapse
It says you have a different model.. Which model do you have
---------- Post added at 07:38 PM ---------- Previous post was at 07:33 PM ----------
jpbhello said:
I've tried that guide already, but I get stuck right here, as it says the process failed.
Click to expand...
Click to collapse
You have the wrong files.. Make sure you download the files for your phone.. Their are many models. That's why its failing.. Read everything before you take action.
joewaz said:
It says you have a different model.. Which model do you have
---------- Post added at 07:38 PM ---------- Previous post was at 07:33 PM ----------
You have the wrong files.. Make sure you download the files for your phone.. Their are many models. That's why its failing.. Read everything before you take action.
Click to expand...
Click to collapse
Thank you everyone, the issue was fixed! After verifying the files, looks like I picked up the wrong TOT file. Had so many of them downloaded over trying to fix this I confused them . Thank you for all of the help, I truly appreciate it. I'm not sure if I am supposed to close the thread or if a moderator will do it or what the protocol is, but consider the issue resolved .
jpbhello said:
Thank you everyone, the issue was fixed! After verifying the files, looks like I picked up the wrong TOT file. Had so many of them downloaded over trying to fix this I confused them . Thank you for all of the help, I truly appreciate it. I'm not sure if I am supposed to close the thread or if a moderator will do it or what the protocol is, but consider the issue resolved .
Click to expand...
Click to collapse
Your welcome.. Sorry I didn't have time to help better yesterday... Fixing bricked phones is my thing lol
Ok, I to root my phone but instead I think I bricked it. My phone only goes to the Samsung screen, when I try to factory reset it doesn't work. When I try to use Odin it fails because I have the activation security armed because I forgot to turn it off. Any idea how to fix this?:crying:
Stock rom
no backup because yes I'm a dumbass!
Shagarion said:
Ok, I to root my phone but instead I think I bricked it. My phone only goes to the Samsung screen, when I try to factory reset it doesn't work. When I try to use Odin it fails because I have the activation security armed because I forgot to turn it off. Any idea how to fix this?:crying:
Stock rom
no backup because yes I'm a dumbass!
Click to expand...
Click to collapse
Did u flash the kernel for the corresponding firmware?
---------- Post added at 11:11 AM ---------- Previous post was at 11:09 AM ----------
Shagarion said:
Ok, I to root my phone but instead I think I bricked it. My phone only goes to the Samsung screen, when I try to factory reset it doesn't work. When I try to use Odin it fails because I have the activation security armed because I forgot to turn it off. Any idea how to fix this?:crying:
Stock rom
no backup because yes I'm a dumbass!
Click to expand...
Click to collapse
Or just explain your procedure so other can help you better.
britchel said:
Did u flash the kernel for the corresponding firmware?
---------- Post added at 11:11 AM ---------- Previous post was at 11:09 AM ----------
Or just explain your procedure so other can help you better.
Click to expand...
Click to collapse
Yes, I flashed the kernal for my phone bricked. I then tried to flash the stock ROM with Odin but it says off fail. I don't care if I lose all the data that is fine I just want my phone working lol
Shagarion said:
Yes, I flashed the kernal for my phone bricked. I then tried to flash the stock ROM with Odin but it says off fail. I don't care if I lose all the data that is fine I just want my phone working lol
Click to expand...
Click to collapse
Just to not look like an idiot, what version do you want to flash, ok3 or pb1?
britchel said:
Just to not look like an idiot, what version do you want to flash, ok3 or pb1?
Click to expand...
Click to collapse
I redownloaded pb1 4 times and finally got it to flash. No more auth fail. Thank you for your time.
Official marshmallow 6.0.1 update for HTC desire 626s.
Android® 6.0 Marshmallow brings new features that make your mobile life more convenient.
Now on Tap
Now on Tap intuitively searches and delivers related information right in the app. This means that you'll never have to leave the conversation or the website you're browsing to search for information.
Just press and hold and Now on Tap displays related information, apps, and actions. See Now on Tap.
Manage phone memory
Use Memory in Settings to monitor the average memory use and performance of HTC Desire 626s. You can also use this setting to check which apps use the most memory.
Major change to how you use storage cards
If you have an existing storage card with media and other files, use it as removable storage so you can insert the card and access your files on any Android phone.
Link[RUU]: http://www.htc.com/us/support/htc-desire-626s-sprint/news/
Release date:6.3.2016
Awesome, just so you know I installed twrp normal as I did on 5.1 also flashed SuperSu 2.74 beta through twrp and got root no problem.
DirtyPISTOLA said:
Awesome, just so you know I installed twrp normal as I did on 5.1 also flashed SuperSu 2.74 beta through twrp and got root no problem.
Click to expand...
Click to collapse
I have everything working except xposed. Do you use xposed?
I haven't tried xpose yet but I will tonight I already got a back up just incase. Did it boot loop when you flashed expose or did it just say it wasn't installed on the xposed installer.
asking the obvious here. Any word on TMO?
Downloaded the ruu had a few mishaps till I found the seamless-root latest one. HTC desire 626s boost. Gonna try exposed module. Some programs don't recognize the root fully yet. Don't ask or don't detect it.
Just curious how does the notification/settings tab look? Can you screen shot that also. Thanks
:c
I can not update, I get error 155, :crying:
Ezekiel_devoid said:
Downloaded the ruu had a few mishaps till I found the seamless-root latest one. HTC desire 626s boost. Gonna try exposed module. Some programs don't recognize the root fully yet. Don't ask or don't detect it.
Click to expand...
Click to collapse
Do you have busybox installed if not make sure you do Busybox is something that you install on your phone to give you some additional handy Linux commands. You need Busy Box installed because some commands are not available to you and you made need them for some root level tasks.
I'm not sure if Busybox is necessary to root, but I don't think so. But many root level apps require busybox, so if you don't install it you're losing some of the benefits of rooting
Busybox is a must. I'm running the version of xposed some recommended in another post for the sprint version work on boost too(framework 79, beta 4 xposed apk). Same company. Was trying custom animations. I believe just the app needed to be updated. All other apps work fine with root permions. 6=0=1 needs debloating. Needs Mordern Jesus.
[/COLOR]
crankiro97 said:
I have everything working except xposed. Do you use xposed?
Click to expand...
Click to collapse
DirtyPISTOLA said:
Awesome, just so you know I installed twrp normal as I did on 5.1 also flashed SuperSu 2.74 beta through twrp and got root no problem.
Click to expand...
Click to collapse
Ezekiel_devoid said:
Downloaded the ruu had a few mishaps till I found the seamless-root latest one. HTC desire 626s boost. Gonna try exposed module. Some programs don't recognize the root fully yet. Don't ask or don't detect it.
Click to expand...
Click to collapse
SWEET, thanks. Was anyone on the stock debloated when they took the update?
http://forum.xda-developers.com/des...m-flashable-stock-htc-626s-debloated-t3293602
Never actually owned a device that became eligible for an upgrade:laugh:
After update
Is anyone else getting force closes on like every game they try after updating and rooting/installing twrp and xposed, and fc on some apps or certain options in apps?
I have the Boost version of the HTC Desire 626s, and running the sprint_stock_626s_1.24.651.2_debloatedV2. I was using TWRP, but after problems today I flashed back to stock recovery, but it did not fix the problem.
Update keeps failing. I let it download, click ok and then it says unzipping file. After a minute or so it jumps to 100% and disappears, then another minute or so and the phone restarts to recovery with the red triangle and !. I press power and volume up to get to the next screen and at the bottom in yellow letters in reads..
(Code -1)
E:missing bitmap oem_unlock_bg_yes
(Code -1)
E:missing bitmap oem_unlock_bg_no
(Code-1)
E:Find no match PARTITION: for package
ath @cache/recovery/block.map
Finding update package....
Opening update package...
Verifying update package...
Installing update...
M60QCT.02.003.021
This package is for "htc_a32ewhl" devic
s; this is a "htc_a32eul".
E:Error in @cache/recovery/block.map
(Status 7)
Installation aborted.
OTA Failed! Please power off this device
to keep it in this state and file a bug
report!
--------------------------------------------------
I have also tried running the RUU.exe from HTC's website for the sprint/boost desire 626s and it aborts with an error:155 "unknown error"
Been messing with this allllllll day and it really is starting to make me want to break things. If anyone knows anything I can do, it would be oh so much appreciated.
I just want a marshmallow
I could post the rom for the update
---------- Post added at 11:15 PM ---------- Previous post was at 11:15 PM ----------
If that would help anyone
---------- Post added at 11:54 PM ---------- Previous post was at 11:15 PM ----------
https://mega.nz/#!YYBBlRhD!CXtR7nvlHXnwSN6Pr9hCHEhMEHYEKI_Zdf-Xvkb1dTs
Mr_DerpFace1337 said:
I could post the rom for the update
---------- Post added at 11:15 PM ---------- Previous post was at 11:15 PM ----------
If that would help anyone
---------- Post added at 11:54 PM ---------- Previous post was at 11:15 PM ----------
https://mega.nz/#!YYBBlRhD!CXtR7nvlHXnwSN6Pr9hCHEhMEHYEKI_Zdf-Xvkb1dTs
Click to expand...
Click to collapse
I'm trying to build a flashable marshmallow rom using SuperR's kitchen on Ubuntu but I need some to help me in booting rom....
crankiro97 said:
I'm trying to build a flashable marshmallow rom using SuperR's kitchen on Ubuntu but I need some to help me in booting rom....
Click to expand...
Click to collapse
Whats the issue?
Mr_DerpFace1337 said:
Whats the issue?
Click to expand...
Click to collapse
I have made a flashable marshmallow rom but it always stucks on htc boot logo/bootloop....
crankiro97 said:
I have made a flashable marshmallow rom but it always stucks on htc boot logo/bootloop....
Click to expand...
Click to collapse
Hmmm how did you make the rom?
are you using the file I posted?
did you wipe the dalvik cache and main cache?
what device and what carrier is it from?
Mr_DerpFace1337 said:
Hmmm how did you make the rom?
are you using the file I posted?
did you wipe the dalvik cache and main cache?
what device and what carrier is it from?
Click to expand...
Click to collapse
I have made the ROM using superr's kitchen on Linux Ubuntu. I have the boost variant 626s...
I know I need to rollback my version to 10k, however I am stymied by antirollback problems using lgup! I could really use some assistance on getting this to rollback to 10k. I have been reading the forums for 2 days now, hundreds of posts, and nothing works. I cant use the dirty cow method of installing twrp as it was patched and my phone auto downloaded the stupid update... Any help would be much appreciated.
Thanks Zernon916
You can't. You're stuck on P. You said it yourself it is anti roll back.
Gytole said:
You can't. You're stuck on P. You said it yourself it is anti roll back.
Click to expand...
Click to collapse
So no one has rooted it yet?
No
Hopefully it comes soon.
I might have a solution. If you are willing to try.. Let me know.
Walter.White said:
I might have a solution. If you are willing to try.. Let me know.
Click to expand...
Click to collapse
Lets hear it ehhe
We chatted via hangout and his process went through easily . but when i flashed twrp through lg up . it just did a factory reset rather than booting to twrp
Walter.White said:
I might have a solution. If you are willing to try.. Let me know.
Click to expand...
Click to collapse
let me knoe I'm down to test it out for you
---------- Post added at 11:27 PM ---------- Previous post was at 11:26 PM ----------
popwar said:
We chatted via hangout and his process went through easily . but when i flashed twrp through lg up . it just did a factory reset rather than booting to twrp
Click to expand...
Click to collapse
let me know what you guys did as I could try looking into it
dudeawsome said:
let me knoe I'm down to test it out for you
---------- Post added at 11:27 PM ---------- Previous post was at 11:26 PM ----------
let me know what you guys did as I could try looking into it
Click to expand...
Click to collapse
Basically just verified my bootloader was unlocked. And used the patched LG UP to Partition flash twrp recovery . got the 2 screens selecting Yes on both as normal with twrp but it just rebooted to android with a fdr
popwar said:
Basically just verified my bootloader was unlocked. And used the patched LG UP to Partition flash twrp recovery . got the 2 screens selecting Yes on both as normal with twrp but it just rebooted to android with a fdr
Click to expand...
Click to collapse
so essentially it never actually flashed twrp
dudeawsome said:
so essentially it never actually flashed twrp
Click to expand...
Click to collapse
Right. Upon reboot after hitting start in LGUP, it went to the stock android firmware upgrade screen, said 100% and rebooted . Did a battery pull when the LG logo came up. Put it back in and used recovery button combo (Volume - and Power). Said yes 2 times and it booted to android instead of twrp.
popwar said:
Right. Upon reboot after hitting start in LGUP, it went to the stock android firmware upgrade screen, said 100% and rebooted . Did a battery pull when the LG logo came up. Put it back in and used recovery button combo (Volume - and Power). Said yes 2 times and it booted to android instead of twrp.
Click to expand...
Click to collapse
I tried this method out but when i press start the lgup just crashes
dudeawsome said:
I tried this method out but when i press start the lgup just crashes
Click to expand...
Click to collapse
Did you select the Partition DL option? Might need the common dll to be patched as well. I can send you the 2 files i replaced in the lgup directory
popwar said:
Did you select the Partition DL option? Might need the common dll to be patched as well. I can send you the 2 files i replaced in the lgup directory
Click to expand...
Click to collapse
yeah send it over
popwar said:
Did you select the Partition DL option? Might need the common dll to be patched as well. I can send you the 2 files i replaced in the lgup directory
Click to expand...
Click to collapse
Credit goes to Walter.White from this forum . I am just relaying the info that he provided me . here is the link to the files i used . ge.tt/3aI5xDm2 . just copy n paste in address bar . i renamed my original files .bak in case .
popwar said:
Credit goes to Walter.White from this forum . I am just relaying the info that he provided me . here is the link to the files i used . ge.tt/3aI5xDm2 . just copy n paste in address bar . i renamed my original files .bak in case .
Click to expand...
Click to collapse
didnt work sadly
dudeawsome said:
didnt work sadly
Click to expand...
Click to collapse
The link?
popwar said:
The link?
Click to expand...
Click to collapse
no link worked but it didnt flash
dudeawsome said:
no link worked but it didnt flash
Click to expand...
Click to collapse
What does it do/say
Anyone, please help, please use LGUP to do a firmware dump for AT&T LG V35 LMV350AWM
To dump the firmware, use the LGUP from this thread (https://forum.xda-developers.com/sho....php?t=3738917), and use the patched DLL and EXE from this thread (https://forum.xda-developers.com/sho...5&postcount=23 and use LGUP+V30DLL_PATCHED.zip), and just use the DUMP function. Definitely skip userdata though (I don't want your data, and it's encrypted anyways).
No one can perform this dump for you - it is restricted by the bootloader for all of the non-kdz partitions.
I have with me a full dump from a V35AWM, which part do you need?
b8engl said:
I have with me a full dump from a V35AWM, which part do you need?
Click to expand...
Click to collapse
Hello, thanks alot, except the userdata and cache partition, All partition is GREAT. Thanks a lot in advance
vlad48 said:
No one can perform this dump for you - it is restricted by the bootloader for all of the non-kdz partitions.
Click to expand...
Click to collapse
Only the system.img is ok. thanks
asialove2013 said:
Hello, thanks alot, except the userdata and cache partition, All partition is GREAT. Thanks a lot in advance
Click to expand...
Click to collapse
Sorry, I can't upload 13GB for you. Which partition do you need to recover?
b8engl said:
Sorry, I can't upload 13GB for you. Which partition do you need to recover?
Click to expand...
Click to collapse
Only the system.img is ok.
why it is 13GB? I guess you dumped the userdata and cache paritions too.
NO need the userdata and cache partition. thanks a lot. tell me your paypal, i would like to donate
asialove2013 said:
Only the system.img is ok.
why it is 13GB? I guess you dumped the userdata and cache paritions too.
NO need the userdata and cache partition. thanks a lot. tell me your paypal, i would like to donate
Click to expand...
Click to collapse
+ 13GB without userdata, with userdata would be more than 45GB!
I already told you by P.M. that you can't program a single IMG with LGUP, but you can try... system.bin download here.
---------- Post added at 04:09 PM ---------- Previous post was at 03:51 PM ----------
if this is something related to software issues, I can remotely program this device through download mode
b8engl said:
+ 13GB without userdata, with userdata would be more than 45GB!
I already told you by P.M. that you can't program a single IMG with LGUP, but you can try... system.bin download here.
---------- Post added at 04:09 PM ---------- Previous post was at 03:51 PM ----------
if this is something related to software issues, I can remotely program this device through download mode
Click to expand...
Click to collapse
Do you still have the lm-v35awm system dump? If so would you be willing to let me get my hands on it?
Meatmassuse said:
Do you still have the lm-v35awm system dump? If so would you be willing to let me get my hands on it?
Click to expand...
Click to collapse
Yes, but why do you need it?
b8engl said:
Yes, but why do you need it?
Click to expand...
Click to collapse
I've got an att lgV350, originally locked but I got unlock code from att. Flashed the US open firmware before there was a viable root method and soft bricked my device at first. Since then, through some trial and error I've got it rooted and all running fine, Android nine. At some point my device lost its S/N and is no longer Google certified. It's a rather small inconvenience really but I was hoping to possibly recover enough from the Original att img to restore my s/n or possibly at least get the certified Id fingerprint so I can stop masquerading as a Google pixel for certification. I'd take the whole dump if you didn't mind other than the personal stuff but that's up to you. Thanks for replying btw.
I suppose you entered the code first then flash the open kdz, else would be a brick. You can't restore the serial number or IMEI. You can only do that with your original files.
That is a bummer for sure, thanks though. I actually bought the phone under the assumption it was already unlocked. For one reason or another I believed the person who told me only to find out that it was not unlocked. The first time I flashed it I did in fact brick it. In all my time playing with phones (first one was my beloved LG G2x lol) I've never seen a worse brick. Actually thought the thing was irrecoverable but I did manage to get it working but still locked. I found that for whatever reason flashing to the US open 8.0 firmware the option the unlock came back and then I emailed att with the phones original information, took then 3 weeks and i thought it was denied but sure enough I got a code from them and it actually worked. every single step of the way I thought itt was a goner.