Related
Magisk v8 --> I haven't tested Magisk hide settings since I am not using SuperSu and suhide, but feel free to test and report
- Added Zenfone 2 Signature
- Point to init.aosp.rc
SuperUser r277 --> Only difference I can see between this and r272 is in hidesu. Users have reported SafetyNet still doesn't pass. I note last commit on github was 4 days ago. I'll compile again if there's any new/significant updates
superuser-r277-hidesu_x86_and fixed_for_ZF2(6.0_bootloader)_by_ameel.zip
- Compiled for x86
- Fixed install scripts
- Added Zenfone 2 Signature
superuser-r277-hidesu_x86_compiled_by_ameel.zip --> This does not work on Zenfone 2 (MM bootloader). It should work for 'regular' x86 bootloaders (e.g. Zenfone 2 running official CM13 on LP bootloader). (Also note I didn't fix the install script, so it might not actually work at all. If it doesn't let me know and I'll fix it)
- Compiled for x86
SuperSu 2.78 SR1 --> works with suhide 0.54 but is very sluggish and laggy on the Zenfone 2!
- Added Zenfone 2 Signature
Xposed 86.2 for Systemless SuperSu
- Forced oat 067
SuperUser r272 --> This contains Hidesu, which is as of time of this post the only su that passes SafetyNet
- Compiled for x86
- Fixed install scripts
- Added Zenfone 2 Signature
Magisk v7
- Added Zenfone 2 Signature
- Point to init.aosp.rc
Xposed 86.6 for Magisk (by topjohnwu)
- Forced oat 067
Note:
- Installing Magisk (even without installing xposed) causes SafetyNet to fail.
- Download and use at your own risk.
Usage:
The attached zip files need to be flashed from TWRP (or similar recovery)
VERY IMPORTANT: The Correct way to install ALL 3 is as follows:
1. Flash Magisk v7 and reboot
2. Flash SuperUser r272 and reboot
3. Flash Magisk modules
If you flash SuperUser r272 first, and flash Magisk, chances are your phone won't boot anymore (I haven't investigated why and won't bother for now).
Given that Magisk v7 fails SafetyNet even with SuperUser r272's hidesu, I wouldn't bother installing the 3 together. Either install SuperUser r272 for root that passes SafetyNet, or install Magisk or Xposed with existing root solutions (i.e. not SuperUser r272).
Credits
Credits to:
- phhusson for SuperUser, and particularly his helpful replies despite my annoying requests
- topjohnwu for magisk
- rovo89 for xposed
- ???? (not sure who to attribute credits to) for Zenfone 2 signature
Click the "Thanks!" button if my files or posts are helpful.
.
Reserved (why not?)
nice that was fast!
With your supersu, we van play pokémon go thats it ? Even if i dont flash magisk?
Ty
quick05 said:
With your supersu, we van play pokémon go thats it ? Even if i dont flash magisk?
Ty
Click to expand...
Click to collapse
Yes.
ameel said:
Yes.
Click to expand...
Click to collapse
Xposed will works or need to flash yours ?
Thanks @ameel!
At least get back my root with this new supersuhide 272.
I assume your ZF2 imei issue is fixed?
hello ameel.
thanks for your work (hope you succeed to recover your phone in the process)!
I just see the SafetyNet update that fail with Magisk now (v6 or v7)
I'll test superuser while it passes safetynet. it won't last long, I presume.
quick05 said:
Xposed will works or need to flash yours ?
Click to expand...
Click to collapse
You can flash whichever xposed you want. I only provided the latest magisk version topjohnwu made, but fixed for Zenfone 2
Remember, if you install xposed, SafetyNet will fail.
chtan23 said:
Thanks @ameel!
At least get back my root with this new supersuhide 272.
I assume your ZF2 imei issue is fixed?
Click to expand...
Click to collapse
Yes, imei fixed
geek85 said:
hello ameel.
thanks for your work (hope you succeed to recover your phone in the process)!
I just see the SafetyNet update that fail with Magisk now (v6 or v7)
I'll test superuser while it passes safetynet. it won't last long, I presume.
Click to expand...
Click to collapse
yup, phone fixed! and yes, SafetyNet fails with Magisk installed (even without root installed). i'm sure topjohnwu will come up with something for Magisk, just have to wait i guess...
what about busybox with SuperUser r272 ?
can we install it? do we have to manually move the files in a custom directory?
geek85 said:
what about busybox with SuperUser r272 ?
can we install it? do we have to manually move the files in a custom directory?
Click to expand...
Click to collapse
Just installed BusyBox downloaded from playstore. Granted root and installed busybox. All working. Passed SafetyNet. yay!
boss, Now how to pokemon go + root Passed SafetyNet?
chord314 said:
boss, Now how to pokemon go + root Passed SafetyNet?
Click to expand...
Click to collapse
Flash SuperUser r272 to root and play pogo. You can't install magisk or xposed. They both cause SafetyNet to fail
ameel said:
Flash SuperUser r272 to root and play pogo. You can't install magisk or xposed. They both cause SafetyNet to fail
Click to expand...
Click to collapse
thank^^
And what if I have the phone previously rooted? Can I just flash this new superuser or should I unroot from SuperSU first?
jman0 said:
And what if I have the phone previously rooted? Can I just flash this new superuser or should I unroot from SuperSU first?
Click to expand...
Click to collapse
unroot first (maybe use the unSU script that exist elsewhere in this forum)
All this extra work just to play one game! Lol I'm glad I'm not into Pokémon Go!
Sent from my ASUS_Z00AD using Tapatalk
kenbo111 said:
All this extra work just to play one game! Lol I'm glad I'm not into Pokémon Go!
Sent from my ASUS_Z00AD using Tapatalk
Click to expand...
Click to collapse
I was wondering the same. But I believe this is also useful for repetitive OTA flashes (no need to flash eXposed, Viper, BB, etc on every flash).
agm2112 said:
I was wondering the same. But I believe this is also useful for repetitive OTA flashes (no need to flash eXposed, Viper, BB, etc on every flash).
Click to expand...
Click to collapse
Very true.
Sent from my ASUS_Z00AD using Tapatalk
Dear @ameel,
Do you have any uninstaller of superUser r272??
Or can i use that one at phh superuser thread??
Thx..
Edited :
Trying flash SuperUser r272 only.. Done..
Checked SafetyNet Helper pass with green background..
Giving TB & Root Checker root acces..
Check SafetyNet Helper, it's failed with red background..
Reboot the phone and SafetyNet Helper pass again..
It's likely i must reboot the phone after giving superuser access to an app to pass SafetyNet..
Any help??
Did i do something wrong?..
I am running NBD91K build, but every time I flash supersu, it sends my phone into a bootloop. I am running the latest TWRP and tried SuperSu 2.78 SR5. Anyone having the same problem?
dewhashish said:
I am running NBD91K build, but every time I flash supersu, it sends my phone into a bootloop. I am running the latest TWRP and tried SuperSu 2.78 SR5. Anyone having the same problem?
Click to expand...
Click to collapse
Are you using suhide by any chance?
I've been stuck at bootloop when i tried to force system (not systemless) root on nougat. So my first thought was to delete /data/.supersu... then I've managed to reinstall root systemlessly, but after a few tries it stayed on the bootloop.... I had to reflash system.img and then I flashed the supersu once again and it works like magic.
Yes, I am using suhide
dewhashish said:
Yes, I am using suhide
Click to expand...
Click to collapse
Suhide does not work with 7.0+ roms with the November security patch. You need to flash the suhide Uninstaller and just use supersu
You're right, unintalling suhide and I can boot my phone after rooting, thanks. Too bad suhide doesn't work with the november patch, otherwise I can't get android pay working.
dewhashish said:
You're right, unintalling suhide and I can boot my phone after rooting, thanks. Too bad suhide doesn't work with the november patch, otherwise I can't get android pay working.
Click to expand...
Click to collapse
did you try Magisk v9 + phh Superuser?
Android Pay works like a charm for me on 7.1.1 DP2
blank
boqonx said:
did you try Magisk v9 + phh Superuser?
Android Pay works like a charm for me on 7.1.1 DP2
Click to expand...
Click to collapse
I installed magisk manager and phh superuser, how do I get Android Pay to work with it? do I need a custom kernel?
dewhashish said:
I installed magisk manager and phh superuser, how do I get Android Pay to work with it? do I need a custom kernel?
Click to expand...
Click to collapse
Ensure that you have uninstalled SuperSU prior to flashing Magisk v9 and phh Superuser.
After, install Magisk Manager apk posted on its thread and phh Superuser manager & SafetyNet Helper from playstore.
You can then hide Magisk from SafetyNet within Magisk Manager setting. Run SafetyNet Helper to test whether you pass the SafetyNet check or not. If everything is passed, then you should be able to use Android Pay & Pokemon Go .
boqonx said:
Ensure that you have uninstalled SuperSU prior to flashing Magisk v9 and phh Superuser.
After, install Magisk Manager apk posted on its thread and phh Superuser manager & SafetyNet Helper from playstore.
You can then hide Magisk from SafetyNet within Magisk Manager setting. Run SafetyNet Helper to test whether you pass the SafetyNet check or not. If everything is passed, then you should be able to use Android Pay & Pokemon Go .
Click to expand...
Click to collapse
that worked! thank you so much for your help!
Steps:
1. Download Magisk V11.1 & uninstaller
2. Root device (use @rrvuhpg root guide)
3. Download and flash Systemless SuperSU
4. Reboot and fully unroot device (don't restore stock boot image)
5. Reboot
6. Reboot into recovery
7. Flash Magisk & reboot
8. Wait for device to reboot fully (it takes a long, long time)
9. Download Magisk Manager from Play Store
10. If root is there, then you're done
Alternate Method:
1. Root Device (use @rrvuhpg root guide)
2. Download and flash Systemless SuperSU
3. Reboot and install Magisk Manager from Play Store
4. Open Magisk Manager and go onto the install tab
5. Press "detect" on the boot image location section and press "Magiskify" (I kept both advanced options unchecked)
6. Once flashed and rebooted, you're done.
Notes:
1. Rebooting after flashing Magisk takes ages, if there is a problem with booting then just flash the Magisk uninstaller. Just try to wait at least 10 minutes for the reboot after flashing Magisk, just don't crap yourself and uninstall the Magisk.
If you have questions or need help, just ask.
is this for single or dual sim XA??
caosugai said:
is this for single or dual sim XA??
Click to expand...
Click to collapse
For all XA and Ultra
rrvuhpg said:
For all XA and Ultra
Click to expand...
Click to collapse
Did it work for you then?
BadmanBristow said:
Did it work for you then?
Click to expand...
Click to collapse
No problem for me on F3112 with Magisk 11.1 and SuperSu 2.79 on 33.2.B.3.105 firmware. Only SafetyNet fail (CTS profil mismatch).
rrvuhpg said:
No problem for me on F3112 with Magisk 11.1 and SuperSu 2.79 on 33.2.B.3.105 firmware. Only SafetyNet fail (CTS profil mismatch).
Click to expand...
Click to collapse
Use MagiskSU instead, fully unroot device with SuperSU but don't restore the boot.img etc. Go to recovery and use the Magisk uninstaller then reflash Magisk 11.1 and if you unrooted, then it will install MagiskSU. It is Magisk's new official root
rrvuhpg said:
No problem for me on F3112 with Magisk 11.1 and SuperSu 2.79 on 33.2.B.3.105 firmware. Only SafetyNet fail (CTS profil mismatch).
Click to expand...
Click to collapse
Also Systemless xposed causes safety net fail and you need to activate Magisk hide in the settings as well
BadmanBristow said:
Also Systemless xposed causes safety net fail and you need to activate Magisk hide in the settings as well
Click to expand...
Click to collapse
And selinuxmode needs to be enforcing but Magisk takes care of that itself so don't worry, just double check it's enforcing, Magisk will turn it permissive itself only when needed
BadmanBristow said:
And selinuxmode needs to be enforcing but Magisk takes care of that itself so don't worry, just double check it's enforcing, Magisk will turn it permissive itself only when needed
Click to expand...
Click to collapse
Thank you for your tips but XA is not my daily phone anymore, now I have a Oneplus3 and XA is just used as test/dev unit. I hope it will help other users.
Magisk should help with maintaining root after the latest and future Xperia XA updates (most likely will work with Nougat update too)
Android Pay
does this let you use android pay
jbenitez821 said:
does this let you use android pay
Click to expand...
Click to collapse
It does, but if you use systemless xposed, you will need to disable it and then it will work.
Thank you very much for this guide.
Can't I use just Magisk installer without unrooting the rom? If I'm not wrong Magisk has is own root manager
I tryed to install Camera 60fps Recording Module but i got error the zip is stored in : intenal storage ....
Is this safety net important to have it in green to pass this CTS ? I have done method 2. Magisk manager form store and then I installed Magisk 12. In installation panel when I tap detect it detecs (auto) mmcblk. Is it all ? Does it work ?
Where can I find the Systemless SuperSU?
I have been trying to change to Magisk with this guide but it failed in the 1st method, the 2nd one gives the root with super su but i wanted to use Magisk alone, so i have been researching and by flashing the stock boot.img (i used the one provided in the thread "Stock kernels built from sources") Magisk was installed and worked except for the SafetyNet. Do someone passes SafetyNet or have a suggestion?
Veniak04 said:
I have been trying to change to Magisk with this guide but it failed in the 1st method, the 2nd one gives the root with super su but i wanted to use Magisk alone, so i have been researching and by flashing the stock boot.img (i used the one provided in the thread "Stock kernels built from sources") Magisk was installed and worked except for the SafetyNet. Do someone passes SafetyNet or have a suggestion?
Click to expand...
Click to collapse
To pass the Safetynet check the only way is to use encrypted partition but you will lose the ability to mount/backup the /data partition with TWRP.
rrvuhpg said:
To pass the Safetynet check the only way is to use encrypted partition but you will lose the ability to mount/backup the /data partition with TWRP.
Click to expand...
Click to collapse
How can i encrypt it and why does it is an issue? I only want to have my phone rooted with Magisk passing SafetyNet
Trying to pass safetynet to use my banks app and pokemon go, using the latest LOS14.1
I tried going the Magisk way, but it still fails CTS.
Is there anyway to make it happen with root and passing safetynet?
You have to use Magisk for root. SuperSU and LineageOS's versions of root will not pass safetynet from my experience. I don't know if it helps but I also have the Play Store and Nintendo's games enabled on Magisk Hide.
eMadman said:
You have to use Magisk for root. SuperSU and LineageOS's versions of root will not pass safetynet from my experience. I don't know if it helps but I also have the Play Store and Nintendo's games enabled on Magisk Hide.
Click to expand...
Click to collapse
I used this guide and it didn't work. Is there another MagiskSU that I'm missing?
EDIT: I got it to work! In the guide above, it says to flash SU in Systemless mode. I just flashed Magisk without SU and it worked! Thanks!
You need Magisk v12 and kernel that includes bootloader status patch. I'm using old version of AX7Kernel, but Beastmode also has it. Not sure about other ones. I'm running relatively recent build and using Android Pay pretty frequently.
@edit And make sure to enable Magisk Hide
[GUIDE] HOW TO UPDATE TO RUI 2.0 AND ROOT IT
--> Disclaimer: I'm not responsible if you brick your device. Use at your own risk and always backup your data! <--
0. Download linksF.14 OTA: Download
Magisk app: Download
OrangeFox beta: Download
ADB/Fastboot tool: Download
Patched boot.img: Find attached
vbmeta.img: Find attached
Patched safetynet fix: Find attached
1. Update your deviceUpdate your device to the latest firmware version (F.14). Therefor flash the provided OTA zip via stock recovery or OrangeFox beta recovery.
It is recommended to use the stock recovery. You can also update your device to the latest firmware by using the build in update function.
2. Root your deviceBoot into fastboot mode. To boot into fastboot mode, shut down your device and then press the volume down button while clicking on the power button.
Now you have successfully booted into fastboot mode. Connect your device with your computer and flash the patched boot.img and also disable verified boot.
Therefor just type following 3 commands:
1. fastboot flash boot patched_boot.img
2. fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
3. fastboot reboot
Your device should boot up. Now install the Magisk app and you have successfully rooted RUI 2.0.
3. Fix SafetynetInstall the patched "safetynet-fix-v.2.2.0-zip" module via Magisk. It will fix safetynet (Basic integrity and CTS). It works perfectly and won't brick your fingerprint etc. Thanks to @osm0sis
4. Get Widevine L1If you have unlocked your bootlader, Widevine will be set from L1 to L3. This will reduce the quality of certain streaming apps like Netflix from FullHD to SD quality.
However, you can get Widevine L1 back by contacting the Realme support. For more info, check the guide from @hack-os: Widevine L1 FIX
Reserved
DarkImperator said:
3. Fix Basic integrity check (Safetynet)Unfortunately, it is not possible to pass safetynet with rooted RUI 2.0. However, you can still pass basic integrity, which should be fine for most banking apps.
To do so, open the Magisk Manger app and click on the settings button on the top-right corner. Enable "Zygisk" and "Denylist". Then click on "Configure DenyList".
Click on the 3-dots on the top-right corner and select system-apps. Now search for "gms". You should find "Google Play Services". Click it and enable "com.google.android.gms" and "com.google.android.gms.unsuable". Now reboot your device and it should pass basic integrity.
Click to expand...
Click to collapse
I have rooted with magisk alpha and my snet passed easily.
To pass snet using magisk alpha:
1. Keep zygisk disabled.
2. Enable MagiskHide.
3. Configure DenyList for "com.google.android.gms" and "com.google.android.gms.unsuable" then reboot and done.
Eng.Raman said:
I have rooted with magisk alpha and my snet passed easily.
To pass snet using magisk alpha:
1. Keep zygisk disabled.
2. Enable MagiskHide.
3. Configure DenyList for "com.google.android.gms" and "com.google.android.gms.unsuable" then reboot and done.
Click to expand...
Click to collapse
Thanks for the info. I already tried it once with Magisk Alpha and the same settings as you, but CTS still failed. I'm gonna try it again and update the guide.
Edit: @Eng.Raman Unfortunately, it doesn't work. Installed Magisk Alpha, also cleaned all data of Google Play Store and Google Play Services multiple times and rebooted multiple times. But CTS still fails.
Do you maybe have installed some modules, like Riru or LPosed?
DarkImperator said:
Thanks for the info. I already tried it once with Magisk Alpha and the same settings as you, but CTS still failed. I'm gonna try it again and update the guide.
Edit: @Eng.Raman Unfortunately, it doesn't work. Installed Magisk Alpha, also cleaned all data of Google Play Store and Google Play Services multiple times and rebooted multiple times. But CTS still fails.
Do you maybe have installed some modules, like Riru or LPosed?
Click to expand...
Click to collapse
Don't dirty-flashing alpha over canary. completely uninstall magisk canary then clean install magisk alpha.
Yes ,I have installed some modules but they don't affect the test result, even without magisk and lsposed modules I have passed snet.
Eng.Raman said:
Don't dirty-flashing alpha over canary. completely uninstall magisk canary then clean install magisk alpha.
Yes ,I have installed some modules but they don't affect the test result, even without magisk and lsposed modules I have passed snet.
Click to expand...
Click to collapse
Yes, I know. That's exactly what I did. I uninstalled Magisk Canary completely including the app and went back to stock boot. Afterwards I installed Magisk alpha app, patched boot.img, flashed patched boot.img an rebooted.
Just a couple of minutes ago a new version of magisk alpha was released, and also with that version CTS fails.
Nevertheless, I found out something interesting. With Magisk Canary, CTS fails and Advice tells me to Lock bootloader. With Magisk Alpha CTS still fails, but I get no advice.
DarkImperator said:
Yes, I know. That's exactly what I did. I uninstalled Magisk Canary completely including the app and went back to stock boot. Afterwards I installed Magisk alpha app, patched boot.img, flashed patched boot.img an rebooted.
Just a couple of minutes ago a new version of magisk alpha was released, and also with that version CTS fails.
Nevertheless, I found out something interesting. With Magisk Canary, CTS fails and Advice tells me to Lock bootloader. With Magisk Alpha CTS still fails, but I get no advice.
Click to expand...
Click to collapse
What is your Momo app and magisk Detector results? Can you screenshot ?
Eng.Raman said:
What is your Momo app and magisk Detector results? Can you screenshot ?
Click to expand...
Click to collapse
Yes. Have installed both and attached the screenshots. Have not added any of those apps to my DenyList.
DarkImperator said:
Yes. Have installed both and attached the screenshots. Have not added any of those apps to my DenyList.
Click to expand...
Click to collapse
Your momo app shows " The environment is broken" and this is related to enabling MagiskHide.
To get rid of this message and to see full results either add config "app_zygote_magic" or install momohider-mod zip attached.
Eng.Raman said:
Your momo app shows " The environment is broken" and this is related to enabling MagiskHide.
To get rid of this message and to see full results either add config "app_zygote_magic" or install momohider-mod zip attached.
Click to expand...
Click to collapse
EDIT: @Eng.Raman had to install MomoHider and add config "app_zygote_magic". Now Momo gives me the message.
DarkImperator said:
Installed MomoHider, but it still said "The environment is broken". So I disabled MagiskHide. Only as MagiskHide was disabled, I received a message from Momo. Screenshot attached.
Click to expand...
Click to collapse
That's weird you can't even hide magisk and su file.
Eng.Raman said:
That's weird you can't even hide magisk and su file.
Click to expand...
Click to collapse
Yeah, Magisk alpha seems not to fix CTS on my device. Safetynet-fix (https://github.com/kdrag0n/safetynet-fix) does, but it also bricks my in-display fingerprint reader. So at the moment it seems like I can't bypass CTS.
DarkImperator said:
Yeah, Magisk alpha seems not to fix CTS on my device. Safetynet-fix (https://github.com/kdrag0n/safetynet-fix) does, but it also bricks my in-display fingerprint reader. So at the moment it seems like I can't bypass CTS.
Click to expand...
Click to collapse
My fingerprint also works well.
Are you tried to pass the snet with the latest USNF-2.1.2? May it works for you.
Eng.Raman said:
My fingerprint also works well.
Are you tried to pass the snet with the latest USNF-2.1.2? May it works for you.
Click to expand...
Click to collapse
Yes, USNF and safetynet-fix both brick my in-display-fingerprint.
With Magisk alpha/canary there is no issue with my fingerprint.
DarkImperator said:
Yes, USNF and safetynet-fix both brick my in-display-fingerprint.
With Magisk alpha/canary there is no issue with my fingerprint.
Click to expand...
Click to collapse
Try clean installing magisk custom it has MagiskHide without DenyList, builtin snet checker and online modules repo as magisk stable, the latest custom magisk build is 23015.
Eng.Raman said:
Try clean installing magisk custom it has MagiskHide without DenyList, builtin snet checker and online modules repo as magisk stable, the latest custom magisk build is 23015.
Click to expand...
Click to collapse
What exactly do you mean with Magisk custom? I was not able to find other 23015 builds than from topjohnwu and vbb2060
DarkImperator said:
What exactly do you mean with Magisk custom? I was not able to find other 23015 builds than from topjohnwu and vbb2060
Click to expand...
Click to collapse
TheHitMan7 Custom Magisk ( Github Link ) updated 6 hours ago.
Also he has two TG channles one named as "Magisk Custom" for downloading the debug builds and the 2nd one named as "Custom Magisk" for supporting and discussions.
Eng.Raman said:
TheHitMan7 Custom Magisk ( Github Link ) updated 6 hours ago.
Also he has two TG channles one named as "Magisk Custom" for downloading the debug builds and the 2nd one named as "Custom Magisk" for supporting and discussions.
Click to expand...
Click to collapse
With enabled Magisk Hide it will fix basic integrity check, but not CTS. And it also bricks my in-display-fingerprint. Guess I'll stay with Magisk Canary, till there might be an update to fix those issues.
Hello guys.
When trying to add my bank card in google pay, I have an error that this phone can't be used to pay because it's rooted.
jalal.sy said:
Hello guys.
When trying to add my bank card in google pay, I have an error that this phone can't be used to pay because it's rooted.
Click to expand...
Click to collapse
I have the same issue with my banking app that doesn't allow NFC payments even though I've done everything to hide root.