I was wondering if somebody has got this before with the Jiayu S3A? I tried to flash a new S3A yesterday by spflashtool because it was delivered with a non rooted rom. Tried to flash an older 5.1 rom in order to flash custom recovery later on (and then 7.1.1 ofcourse ). However it gave me an error (PMT changed for the ROM, it must be downloaded) and some pages on google suggested a format (without bootloader) so I did that. After that I succesfully flashed a rom version 5.1 but when I tried to flash custom recovery or other roms, it kept giving the error message BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) and the phone won't boot. Tried different roms and with/without battery, different settings, different drivers but I still can't flash a rom nor boot the device. Maybe the battery was drained in the process (it is now on a charger for a night). Or maybe it was a S3+ or something, sold with the wrong type?(The box and label on the telephone said JY-S3 and it had 32 gb so it can not be a S3+ right?) Never had this problem before with other S3's so I'm hoping that someone can help me! Thanks in advance.
Sounds like you messed things up completely by flashing the Lollipop ROM and formatting. You git the S3A with 32 GB RAM, right? Afaik this comes preinstalled with Marshmallow and there is no compatible Lollipop ROM for the S3A 32 GB.
If I were you I would try to flash stock MM again. If you really flashed Lollipop with formatting option in SP Flash Tool, you probably need to format, too. Make sure that the phone boots again. Next, flash TWRP recovery from m.a.d. team through SP Flash Tool. Finally flash the m.a.d. Nougat ROM, nano GAPPS and SuperSu in recovery.
Related
I will try to explain me clearly
My phone is working normally and I can restore nandroid without issues
I'm actually with my V29 KK TW and work without issues
BUT If i flash aosp or cm rom, just afeter enter pin code, the screen becomes black like problem with proximity sensor
I can put my hand in front, it doesn't change, If I push the buttons, sometimes the screen appears and disappears immediately
and the more strange is I have this problem with the RR 5.3.9 I had flashed before without issue and can restore a nandroid I have done with it...
I have done a clean flash of my KK TW V29 without issue....
first I have made a FULL wipe include internal storage and flash stock NI4 rom but without any changes
someone got an idea???
thank's
I have flashed successfully 2 QS L differents versions but can't with CM roms (euphoria, tema, RR...)
is there a reason to that
This is x-files troubles, personally I reflash stock LP with Odin and all is good now
I have try back with RR 5.3.9 and got same problem but if I restore nandroid from 5.3.9 it's working without issues...WTF!!!!!!!!!!!!
i try to flash L stock rom with odin root, complete wipe (except ext sdcard)
I run masik script wipe and ael cleaner, format boot, system data
It seem's it begin when I flash arter kernel or the UKM (universal kernel manager) to run civ kernel..
so i try to uninstall ukm but allways without succes
I flashed 4.4 c-rom without issues, so I flashed back KK rom with odin and back to my V29 kk rom
look my signature to have details on my config
thank's for the help..
So...first question:
Did you ever take the official lollipop update from samsung?
Second Question:
What country are you in, and carrier do you use?
Please message me the following details from the sticker inside the device under the battery, so I can grab the Service files from samsung for you!
I've flashed OB1 with odin and flash back after 2 weeks NI4 and the last I try was this N9005XXUFNG2_N9005OXXFNG3_XEF (Open France) (No-wipe)
the flash goes well but doesn't change my BL and modem, before that I was with NI4 BL and NI3 modem and now still with that
I use sosh carrier (orange) in france
will send you the details from sticker
@rayman95 This is what i have found out!!! From my understanding, You took the Lollipop bootloader when you installed the OC1 Package. if you want to completely restore to "Earlier Version", WHICH this may not be possible due to a SAMSUNG new coding issue, You would need to have the complete 4 Files software to repair your device.... As well as using all the following checkboxes in ODIN:
Auto-Reboot
Re-Partition
F. Reset Time
NAND Erase ALL
Phone Bootloader Update
I Attempted to download your files for the device, but Kies will Not "Initialize" for download, and it will give you an Error if you plug the device into Kies3 i believe because you device is ROMMed.
IF you want to try Kies to restore AND it begins "DOWNLOADING", You can copy the Tmp****.tmp.zip that is created when the progress indicator hits 85% in Kies.
The File location on Win7 is "C:\Users\*Your Screen Name HERE*\AppData\Local\Temp"
If you Have the 4 Part file for NI2, try flashing in ODIN wioth the Above Checkboxes selected!!
Kies don t let me dl any files and gave me some error but don't remember exactly what... but not important because you give me good files.....after that I hope flashing again cm12.1.....
Thank so again chief....
After more than a year with my 4.3 Note 3. I decided to flash a custom ROM. Namely Aryamod 6. (first attachment was the stock 4.3 I started with). I knew that I needed to backup my data so I decided to flash a custom recovery so I went about it by getting Rom Manager to flash CWM which eventually would allow me to flash TWRP. I eventually used the dd install method to install TWRP but that didn't work so I used odin to flash it. This caused my Note to freeze up a few minutes after booting with a black screen and the status bar just showing.
I decided to go through with flashing Aryamod v6 to get a fresh start. I flshed the BL and CP files which then caused my Note to go into a boot loop where I can't even boot to recovery. I was told to update to a 5.0 rom and I used the base rom of Aryamod v6 which is the BOE4 rom. Now when I try to flash the BOE4 rom I get the volume size is too big and invalid ext4 image.
Also sometime during the first bootloop I accidentally ticked Nand EraseAll but as far as I could see it did nothing.
Anyway, right now it is very difficult to download another ROM because of horrible Philippine isps and my Note is also my daily driver so I need to get it back into working order ASAP. These are the files I have:
ODIN 3.09
N9005XXUGBOEA_N9005OJVGBOE4_KSA - The Base ROM of Aryamod v6 a 5.0 rom
N9005XXUGBOEA_AryaModV6.0_Public - Aryamod v6
CP_N9005XXUGBOD3.tar.md5 - part of the aryamod instructions and I believe the modem of 5.0
BL_N9005XXUGBOEA.tar.md5 - part of the aryamod instructions and I think the bootloader?
twrp-2.8.7.0-hlte-4.3.img. zip- The twrp version I flashed when I was on 4.3
hlte-recovery.img.zip - I flashed this to get out of the recovery loop when I dd installed Twrp.
PIT-File-DBT+VFG-UK-MSM8974 - A PIT file.
SM-N9005_32GB.pit - another pit file. Flashing this got me into stock recovery.
N9005ZHUBMI7_N9005ZZHBMI7_N9005XXUBMI5_HOME.tar.md5 - I don't remember where I got this. Haven't flashed this but it might be a backup of my 4.3 rom
A few questions.
Can I fix my phone with these files?
When Flashing the BOE4, I just put it on PDA/AP? but in this thread http://forum.xda-developers.com/galaxy-note-3/general/guide-t2983873, he seems to be putting it on everything.
I really need your help on these
I have no idea about that file you have, whether it will work or not, but the only thing I can say is, the Polish ROM is the Lollipop ROM which works on most devices, so you might wanna give it a try.
I don't live in a place with even decent ISPs, but I can download a ROM in less than two hours, so if your condition is not worse then you will have to download a ROM rather than depending on what you have.
have rooted s5 on 4.4.4 nk2. Have been trying to install custom roms via safestrap. Apparently i am missing a step. I wipe data, try to install twi5ted Lollipop on custom rom slot....blank screen for over 30 min after reboot, phone gets real hot, take battery out. Try to install on stock rom slot, reboot then get stuck in boot loop and keeps booting into system recovery. I then saw through my hours of searching to format instead of wipe....so i format then try to install, get stuck again, take battery out, get back to safestrap dash now when i try to wipe/format/or even restore my backup it says unable to mount system. When i click reboot system it says no OS installed. After reboot, my custom slot gets erased.
I was about to try an odin flash back to stock but some how was able to get my phone back to a system restore. Why can i not get anything installed? Do i have to have odin to do a custom rom install?????? i know every rom is different but wtf. I have seen multiple videos and threads of people flashing zip via safestrap and rebooting into new rom without flashing kernals via odin or safestrap after rom install.
Also...my phone will not let me download zip files (ex. cm12.1) says unable to create download folder....how close to F'in my phone up am i? I have successfully rooted all phones in the past...s5 is giving me hell!
I just tried installing rom after format, then flash nk2 kernel from odin, still gives boot loop....ive tried everything i have found..never this much problem with custom rom..
When you try to install twisted it needs lollipop firmware which is flashed on odin, and based on your statement it says you're on NK2, a kitkat firmware. Try flashing a stock ncg tar and rerouting, downloading apps, etc. on the phone to see if that works. Also, I noticed you mentioned a cm 12.1 zip not downloading which, while unrelated to your current problem, will cause a bootloop when flashed due to the locked bootloader on the S5, so it isn't a smart idea to even attempt an install.
mrjiggywiggy said:
When you try to install twisted it needs lollipop firmware which is flashed on odin, and based on your statement it says you're on NK2, a kitkat firmware. Try flashing a stock ncg tar and rerouting, downloading apps, etc. on the phone to see if that works. Also, I noticed you mentioned a cm 12.1 zip not downloading which, while unrelated to your current problem, will cause a bootloop when flashed due to the locked bootloader on the S5, so it isn't a smart idea to even attempt an install.
Click to expand...
Click to collapse
thanks, i will try fresh from start ncg. so you have to be on the current kernel that you are flashing a rom for, whether its CM, Twi5ted, Alliance...etc i need to be on rooted 5.0 kernel then flash rom via safestrap?
i was having problems downloading from internet on phone, not downloading rom if thats what you thought i meant. I just tried installing zip for CM 12 via safestrap and got same issue. Phone reboots, goes to black screen and eventually heats up like crazy. .... I just noticed, after my restore ...again... it says safestrap disabled in red on the boot screen, why is that? it says installed and tried reinstalling.
FIXED
So i flashed ncg from odin on the messed up phone and got messed up worse. Ended up getting stuck on first boot image of samsung android s5 boot screen. Finally found original stock firmare file and used odin to complete install stock os and got rid of root. Now back to normal... luckily i figured it out my self! thanks to the 100's who viewed and didnt help and thanks to mrjiggywiggy for giving me some input to help out!
Hi. Why when im trying to install cm11 rom it doesnt say anything? Only say partition complete. When i reboot, nothing happen. Stuck on lenovo logo. But when im try to install update9.zip from cm11 thread its show ed300 installing bla bla bla like normally. But the rom doesnt show anything. When reboot its only stuck on lenovo logo. Help please. Rom Cm12.1 works fine while flash. But too many bugs. Sim its not work. Any solution?
Which rom is really really stable?
When im try to downgrade to kitkat stock rom, it failed. It say updater process ended with error: 7. I dont know what to do
NovaTz said:
Hi. Why when im trying to install cm11 rom it doesnt say anything? Only say partition complete. When i reboot, nothing happen. Stuck on lenovo logo. But when im try to install update9.zip from cm11 thread its show ed300 installing bla bla bla like normally. But the rom doesnt show anything. When reboot its only stuck on lenovo logo. Help please. Rom Cm12.1 works fine while flash. But too many bugs. Sim its not work. Any solution?
Which rom is really really stable?
When im try to downgrade to kitkat stock rom, it failed. It say updater process ended with error: 7. I dont know what to do
Click to expand...
Click to collapse
At first flash lolipop stock ROM.Full guide is here.Then flash cm13 by @ED300.
Bro Lenovo a6000 plus firmware downloading link fail.
I have solution
Bro first of all test those sim cards in another mobile , if they were fine then you have two remove both sim cards from your device and then reboot to recovery and flash stock rom (if you have kk based rom installled then flash only kk based pure official stock rom only or if you have lollipop/marshmallow /naughat based rom installed then you have to flash only stock pure official lolipop rom ) . For flashing stock lolipop rom first extract that package and move system.zip and another country named file which one you want i recommend you to use your own country file , after that flash only these to system.zip and country zip via recovery first flash system.zip and then country zip and then super su . And after flashing stock rom don't forget to flash your twrp recovery ( for example- for stock kitkat flash kitkat based twrp.img and for stock lolipop flash lolipop based twrp.img and then flash any supersu.zip file ) remember the step of flashing twrp recovery again before rebooting otherwise you will permanently loose your twrp and root access .This simcard error comes from persist partition (you can easily see this option during mounting any file system in twrp recovery) . I am damn sure that you accidentally wiped this partition , but don't worry if this is not a hardware related problem you can easily make your device to work properly with your sims, Another tip please flash those stock roms without sim cards and don't insert sim cards until your phone turns on for first time after that you will switch off your phone and insert sims. Wolla you got your sim connection back. I am again saying flash stock rom only without any sim . If these steps dont work contact me via WhatsApp - +91 9205097520 or simply reply me on xda or mail me at [email protected] . I hope you understand the steps :good: .
And don't forget to tell me about your device problem
. Any time you want help iam ready for you guys.
sometimes the sim slot is loose for sims when we put in our micro-sim my telenor PK works flawlessly on both slot 1&2 while i couldnt get my Jazz/Warid one to work and the solution was to add a piece of paper on the sim over slot 2 to get it read otherwise im sure your issue was resolved by the previous person who posted
Hi there, I have a SM-A5000 2015.
Here is the problem. I have made it unrecognizable by ODIN (Seems because I tried to flash the bootloader of other A500 model, because I couldn't find any for A5000)
ODIN works before I tried that bootloader)
so I can't flash STOCK rom via ODIN, and I don't have backup sorry..
I have TWRP 3.0.2.1 flashed and usable.
I tried to flash custom ROM but I neither faced "device model not match error 7" or If I remove the whole model assert code or amend the model name, it gave me "unknown command error 7".
That's why I'd like to make a STOCK .TAR.MD5 into a TWRP flashable ROM, I have searched and found Android Kitchen. But it is too hard for me sorry.
Is there anyone who can advise me how to solve this..please? I'd be grateful for any help.
SM-A5000 2015
TWRP 3.0.2.1
ODIN 3.10.7
NO OS installed
(tried to install this ROM, but it didn't reboot successfully, and turned into some wrong color screen and stucked https://forum.xda-developers.com/t/rom-7-1-1-xtreme-os-for-a5-2015-v3-5-30-12-18.3779606/ )
STOCK ROM LINK: https://firmwarefile.com/samsung-sm-a5000
A5000..TGY.ZIP