I will try to explain me clearly
My phone is working normally and I can restore nandroid without issues
I'm actually with my V29 KK TW and work without issues
BUT If i flash aosp or cm rom, just afeter enter pin code, the screen becomes black like problem with proximity sensor
I can put my hand in front, it doesn't change, If I push the buttons, sometimes the screen appears and disappears immediately
and the more strange is I have this problem with the RR 5.3.9 I had flashed before without issue and can restore a nandroid I have done with it...
I have done a clean flash of my KK TW V29 without issue....
first I have made a FULL wipe include internal storage and flash stock NI4 rom but without any changes
someone got an idea???
thank's
I have flashed successfully 2 QS L differents versions but can't with CM roms (euphoria, tema, RR...)
is there a reason to that
This is x-files troubles, personally I reflash stock LP with Odin and all is good now
I have try back with RR 5.3.9 and got same problem but if I restore nandroid from 5.3.9 it's working without issues...WTF!!!!!!!!!!!!
i try to flash L stock rom with odin root, complete wipe (except ext sdcard)
I run masik script wipe and ael cleaner, format boot, system data
It seem's it begin when I flash arter kernel or the UKM (universal kernel manager) to run civ kernel..
so i try to uninstall ukm but allways without succes
I flashed 4.4 c-rom without issues, so I flashed back KK rom with odin and back to my V29 kk rom
look my signature to have details on my config
thank's for the help..
So...first question:
Did you ever take the official lollipop update from samsung?
Second Question:
What country are you in, and carrier do you use?
Please message me the following details from the sticker inside the device under the battery, so I can grab the Service files from samsung for you!
I've flashed OB1 with odin and flash back after 2 weeks NI4 and the last I try was this N9005XXUFNG2_N9005OXXFNG3_XEF (Open France) (No-wipe)
the flash goes well but doesn't change my BL and modem, before that I was with NI4 BL and NI3 modem and now still with that
I use sosh carrier (orange) in france
will send you the details from sticker
@rayman95 This is what i have found out!!! From my understanding, You took the Lollipop bootloader when you installed the OC1 Package. if you want to completely restore to "Earlier Version", WHICH this may not be possible due to a SAMSUNG new coding issue, You would need to have the complete 4 Files software to repair your device.... As well as using all the following checkboxes in ODIN:
Auto-Reboot
Re-Partition
F. Reset Time
NAND Erase ALL
Phone Bootloader Update
I Attempted to download your files for the device, but Kies will Not "Initialize" for download, and it will give you an Error if you plug the device into Kies3 i believe because you device is ROMMed.
IF you want to try Kies to restore AND it begins "DOWNLOADING", You can copy the Tmp****.tmp.zip that is created when the progress indicator hits 85% in Kies.
The File location on Win7 is "C:\Users\*Your Screen Name HERE*\AppData\Local\Temp"
If you Have the 4 Part file for NI2, try flashing in ODIN wioth the Above Checkboxes selected!!
Kies don t let me dl any files and gave me some error but don't remember exactly what... but not important because you give me good files.....after that I hope flashing again cm12.1.....
Thank so again chief....
Related
I have a SM-N900W8 canadian note 3. I just installed new DOC4 lollipop rom via odin. I did clean install by wiping data. I root with CF-Root and flash latest TWRP. Everything seems to work perfectly until i try to made some small mod to add datamobile button in quicksettings using this thread. : http://forum.xda-developers.com/showthread.php?t=2342370
After it boots up to a black screen and a pop up shows up for nearly all of my apps that says they are not responding so all I get is that and a black screen. I reflash the rom via odin without wiping my data, re-root and everything went back fine and my mod works. ???!! I now have my datamobile button.
Later, i made a nandroid backup with TWRP. After reboot i got the same errors.... So i Reflash-rom, re-root, everything back to normal.
TO make a short story, everytime i access recovery or flash something in recovery or modify my system partition i got this errors....
I suspect having partition mismatched ... i don't know...
Any idea ???
Any help appreciated...
Which version of TWRP did you use? As far as I know, the latest only supports up to kitkat (4.4)
Maybe this is what causes your problems?
That's what i thought, I'm using the latest one (2.8.6.0). I ask other users in another thread and they said this version is working flawlessly with lollipop...
I have the same phone, and I flashed lollipop DOC4 using Odin yesterday, with CF-auto-root and TWRP 2.8.6.0.
I just tried (litterally minutes ago) adding the data toggle, and it worked, but I could not reproduce your problem.
Which version of TWRP did you use? The hltecan one or the hltexx?
Tornade69 said:
I have a SM-N900W8 canadian note 3. I just installed new DOC4 lollipop rom via odin. I did clean install by wiping data. I root with CF-Root and flash latest TWRP. Everything seems to work perfectly until i try to made some small mod to add datamobile button in quicksettings using this thread. : http://forum.xda-developers.com/showthread.php?t=2342370
After it boots up to a black screen and a pop up shows up for nearly all of my apps that says they are not responding so all I get is that and a black screen. I reflash the rom via odin without wiping my data, re-root and everything went back fine and my mod works. ???!! I now have my datamobile button.
Later, i made a nandroid backup with TWRP. After reboot i got the same errors.... So i Reflash-rom, re-root, everything back to normal.
TO make a short story, everytime i access recovery or flash something in recovery or modify my system partition i got this errors....
I suspect having partition mismatched ... i don't know...
Any idea ???
Any help appreciated...
Click to expand...
Click to collapse
1. Are you sure you installed correct TWRP? The correct one for your device: HERE.
2. Seems that mod for datamobile button doesn't work for your device. Reflash rom, re-root and don't install that mod. Try that update firmware for some days and tell me how it works :highfive:
I used HLTECAN 2.8.6.0. When i was on 4.4.2 NB7, i was using the same file and i had not problems at all. If you re-read my first post, i said my data toggle is working fine now but i needed to re-flash the entire rom without wiping data to get rid of the many apps errors. I guess i need to reflash everything from scratch... Will use another USB wire and another USB port. Maybe it'll help... Or maybe i should try another root method ??? I used CF-Root for SM-n900w8...
I suggest trying with hltexx, since it is the version I used, and I encountered no problem at all so far.
Let's check for any other difference between devices. I got :
Baseband N900W8VLUBMJ4
Bootloader N900W8UBUCNA2
PDA Version N900W8VLU2DOC4
CSC Version N900W8OYADOC4
Stock Kernel
how do you root n900w8 lollipop rom ?
phberb said:
I have the same phone, and I flashed lollipop DOC4 using Odin yesterday, with CF-auto-root and TWRP 2.8.6.0.
I just tried (litterally minutes ago) adding the data toggle, and it worked, but I could not reproduce your problem.
Which version of TWRP did you use? The hltecan one or the hltexx?
Click to expand...
Click to collapse
I want to root my n900w8 too ...tell me intrusions before tell is it safe .
phberb said:
I suggest trying with hltexx, since it is the version I used, and I encountered no problem at all so far.
Let's check for any other difference between devices. I got :
Baseband N900W8VLUBMJ4
Bootloader N900W8UBUCNA2
PDA Version N900W8VLU2DOC4
CSC Version N900W8OYADOC4
Stock Kernel
Click to expand...
Click to collapse
Hi, can I root N900W8 running N900W8UBU2DOG2 firmware from region TTT with twrp? If not is there any other method I can use to root my device ?
After more than a year with my 4.3 Note 3. I decided to flash a custom ROM. Namely Aryamod 6. (first attachment was the stock 4.3 I started with). I knew that I needed to backup my data so I decided to flash a custom recovery so I went about it by getting Rom Manager to flash CWM which eventually would allow me to flash TWRP. I eventually used the dd install method to install TWRP but that didn't work so I used odin to flash it. This caused my Note to freeze up a few minutes after booting with a black screen and the status bar just showing.
I decided to go through with flashing Aryamod v6 to get a fresh start. I flshed the BL and CP files which then caused my Note to go into a boot loop where I can't even boot to recovery. I was told to update to a 5.0 rom and I used the base rom of Aryamod v6 which is the BOE4 rom. Now when I try to flash the BOE4 rom I get the volume size is too big and invalid ext4 image.
Also sometime during the first bootloop I accidentally ticked Nand EraseAll but as far as I could see it did nothing.
Anyway, right now it is very difficult to download another ROM because of horrible Philippine isps and my Note is also my daily driver so I need to get it back into working order ASAP. These are the files I have:
ODIN 3.09
N9005XXUGBOEA_N9005OJVGBOE4_KSA - The Base ROM of Aryamod v6 a 5.0 rom
N9005XXUGBOEA_AryaModV6.0_Public - Aryamod v6
CP_N9005XXUGBOD3.tar.md5 - part of the aryamod instructions and I believe the modem of 5.0
BL_N9005XXUGBOEA.tar.md5 - part of the aryamod instructions and I think the bootloader?
twrp-2.8.7.0-hlte-4.3.img. zip- The twrp version I flashed when I was on 4.3
hlte-recovery.img.zip - I flashed this to get out of the recovery loop when I dd installed Twrp.
PIT-File-DBT+VFG-UK-MSM8974 - A PIT file.
SM-N9005_32GB.pit - another pit file. Flashing this got me into stock recovery.
N9005ZHUBMI7_N9005ZZHBMI7_N9005XXUBMI5_HOME.tar.md5 - I don't remember where I got this. Haven't flashed this but it might be a backup of my 4.3 rom
A few questions.
Can I fix my phone with these files?
When Flashing the BOE4, I just put it on PDA/AP? but in this thread http://forum.xda-developers.com/galaxy-note-3/general/guide-t2983873, he seems to be putting it on everything.
I really need your help on these
I have no idea about that file you have, whether it will work or not, but the only thing I can say is, the Polish ROM is the Lollipop ROM which works on most devices, so you might wanna give it a try.
I don't live in a place with even decent ISPs, but I can download a ROM in less than two hours, so if your condition is not worse then you will have to download a ROM rather than depending on what you have.
Hi,
Need help in fixing my Note 3...Please
I have Galaxy Note 3 N9005 with android 4.4.2. having ROM model N9005ZHUENH4_N9005ZZHENH4_TGY
I downloaded Android V 5.0 ROM from Sammobile with country TGY same as that of already working ROM.
I started the mobile in download mode and burned the ROM but it failed at cache.img with invalid Ext4 error
I downloaded many other ROMs for N9005 from sammobile and only few loaded successfully. However all the ROMs flashed successfully result in inactive wifi.
So I am now running mobile with no wifi.
Please help...
What do you mean rom burning ?? Heating or flashing ??
What is your phones original firmware ??
i'm also facing this problem when i flash Samsung Official Firmwares (kitkat & lollypop) on my Note 3 SM-N9005.. after flashing Wifi button becomes irresponsive so that i cant switch on my wifi..
But When i do flash any custom ROM ( like blisspop, Dark Lord , Phorensesis etc) , this wifi problem is not occured..
if u got any solution , plz post it.. thanks in advance
JJEgan said:
What do you mean rom burning ?? Heating or flashing ??
What is your phones original firmware ??
Click to expand...
Click to collapse
By burning I meant flashing new ROM
Original firmware is N9005ZHUENH4_N9005ZZHENH4_TGY and mobile is not rooted.
Now re-flashing the stock ROM downloaded from sammobile fails at cache.img with invalid Ext4 error
However the following ROMS loads successfully but Wifi greyed and not enabling/working
N9005XXUGBOD6_N9005AMOGBOD2_AMO
N9005XXUGBOF1_N9005BTUGBOD2_N9005XXUGBOD3_HOME.tar.md5
N9005XXUGBOG4_N9005OJVGBOG2_N9005XXUGBOD3_HOME.tar.md5
N9005XXUGBOJ6_N9005XEOGBOJ1_XEO
N9005XXUGNG1_N9005AMOGNH1_N9005XXUGNG1_HOME.tar.md5
N9005XXUGNG1_N9005XEOEND2_alexndr.tar.md5
N9005XXUGBOD6_N9005AMOGBOD2_N9005XXUGBOD1_HOME.tar.md5
N9005XXUGBOJ6_N9005XEOGBOJ1_N9005XXUGBOJ1_HOME.tar.md5
same issue
i also faced the same issue and can't fix it till now
but some said that there is a driver file could be uploaded through odin will fix it as it's a driver sw issue not hardware
so do anyone know from where can we find this file plz?
HELP
Hi XYAN78, I had the same isse as you, I also upgraded from kitkat 4.4.2 to the latest TGY rom through Odin, I finally fixed it. Here are the things you can try :
1. Try wipe cache, data from recovery then shut down and take out the battery, then startup the phone again. You may try a few times.
2. If 1. not work, try do :
-wipe data/cache in recovery.
-flash rom througn Odin( don't tick the auto restart check Box), when odin flash finish, reboot into recovery and wipe data&cache. Shut down and take out the battery.
-boot into download mode directly, and flash the rom again.
(You may ned try more time this cycle in order to to fix it. Good luck)
leohk said:
Hi XYAN78, I had the same isse as you, I also upgraded from kitkat 4.4.2 to the latest TGY rom through Odin, I finally fixed it. Here are the things you can try :
1. Try wipe cache, data from recovery then shut down and take out the battery, then startup the phone again. You may try a few times.
2. If 1. not work, try do :
-wipe data/cache in recovery.
-flash rom througn Odin( don't tick the auto restart check Box), when odin flash finish, reboot into recovery and wipe data&cache. Shut down and take out the battery.
-boot into download mode directly, and flash the rom again.
(You may ned try more time this cycle in order to to fix it. Good luck)
Click to expand...
Click to collapse
Hi leohk,
i tried your steps but not working...
actually i cannot reload my actual ROM TGY 4.4.2. Few working ROMs as given in my last post are loading successfully.
Can you tell what TGY ROM you have successfully flashed and from where you downloaded that . as i have tried almost all tgy roms from sammobile... I have noticed a zip file error in the TGY ROMs downloaded from sammobile
XYAN78 said:
Hi leohk,
i tried your steps but not working...
actually i cannot reload my actual ROM TGY 4.4.2. Few working ROMs as given in my last post are loading successfully.
Can you tell what TGY ROM you have successfully flashed and from where you downloaded that . as i have tried almost all tgy roms from sammobile... I have noticed a zip file error in the TGY ROMs downloaded from sammobile
Click to expand...
Click to collapse
Originally I was on Kitkat: N9005ZHUENJ1 and then flash the Lollipop N9005ZSUGOI1, I use Winrar and when try the zip file test also failed but after installed the latest version of Winrar, it passed the test. btw, when Odin do the flash it will test the MD5 check also, so if it can pass the MD5 test step in Odin flash process then the file should be fine.
below is the Lollipop Rom I flashed, and I followed the instruction there also.
http://www.sammobile.com/firmwares/download/57235/N9005ZSUGOI1_N9005OZSGOI1_TGY/
I remember I tried the process around 4-5 time before I can get the wifi issue fixed. I have a 16G HK version Note 3.
Hi leohk,
I tried the method but it is not working. The TGY ROMS gives ext4 error at cache.img. other ROMS as in my above post loads but without Wifi. So, still without Wifi...
my mobile is 32GB HK version maybe that is the reason.
I also noticed mobile heating up after flash/factory reset is it normal??
Thanks for sharing your experience.
Hi All,
After wandering over the internet to solve my problem i finally resolved it.
I changed my approach to problem instead of focusing on wifi to work with ROMS loading successfully; i focused on ext4 error while flashing with original TGY stock ROM.
After googling and going through many forums I found the solution that worked
The solution was to flash the stock TGY ROM with pit file "CSB_signed_HLTE_EUR_OPEN_32G_0805" and voila...
This pit file is available on the internet.
Initially I loaded original TGY stock ROM 4.4.2 which worked and Wifi not greyed this time.
Afterward I loaded TGY ROM 5.0. The second time without pit file and it was fine.
After re-partition with CSB_Signed_HLTE_EUR_OPEN_32G_0805, what are size of the partition of System, Cache and Hidden of your Note3?
My 32G N9005 is with same wifi problem after flashing latest TGY LL stock ROM. I found System partition size is of 2.2GB but the size of System partition derived from PIT file should be 2.9GB.
Everything was fine until I flashed CM13 unofficial.
Now, my bootloader is updated to 6.0 (COJ5 something or COH4), I can't revert to something prior to that: odin fails at sboot.bin NAND write start fail.
-While this issue has occured to many others than me, I'm the only one who can't even boot into CM13 or AOSP based ROMs, even after pushing different variants of ROMs several times through ADB, bootloops are still persistent.
-Any other 5.1.1 Official ROM that's not COJ5 or COH4 fails to flash at odin. COJ5/COH4 ROMS flash succesfully, but the phone doesn't boot past the samsung text.
-I have tried flashing various COH4 ROMS along with their AP,BL,CSC etc, everything flashes succesfully apart from the bootloader file, and after that it's the same samsung text brick. I couldn't find the PIT files (bootloader csc n such) for COJ5..
Is there a place I can find a backed up EFS partion ?file? and restore it myself? Would this get me out of the****hole i'm currently in?
What can I do about this...
Nortabun said:
Everything was fine until I flashed CM13 unofficial.
Now, my bootloader is updated to 6.0 (COJ5 something or COH4), I can't revert to something prior to that: odin fails at sboot.bin NAND write start fail.
-While this issue has occured to many others than me, I'm the only one who can't even boot into CM13 or AOSP based ROMs, even after pushing different variants of ROMs several times through ADB, bootloops are still persistent.
-Any other 5.1.1 Official ROM that's not COJ5 or COH4 fails to flash at odin. COJ5/COH4 ROMS flash succesfully, but the phone doesn't boot past the samsung text.
-I have tried flashing various COH4 ROMS along with their AP,BL,CSC etc, everything flashes succesfully apart from the bootloader file, and after that it's the same samsung text brick. I couldn't find the PIT files (bootloader csc n such) for COJ5..
Is there a place I can find a backed up EFS partion ?file? and restore it myself? Would this get me out of the****hole i'm currently in?
What can I do about this...
Click to expand...
Click to collapse
Hi, this may help you http://forum.xda-developers.com/note-4/help/fix-note4-exynos-n910c-bootloop-problem-t3312161
mangui said:
Hi, this may help you http://forum.xda-developers.com/note-4/help/fix-note4-exynos-n910c-bootloop-problem-t3312161
Click to expand...
Click to collapse
Yea i came across this, but there was one tiny problem
how on earth am i supposed to root, get busybox, and apply usb debugging on my phone while it has no functional ROM?
and how on earth am i supposed to transfer a backup from my ROMless phone?
Do you have a pit file for repartition
If so, access twrp , wipe everything including your internal storage. Then boot into download mode.
In the computer, load the pit file and your stock coj5 into Odin 3.10 , tick "repartition" and "Nand Erase All"then click start.
Back to your phone - which now should be boot looping - access the stock recovery and wipe. Root - try using a different root method like chainfire's Odin autoroot - then twrp ur phone. Flash cm13 then start running the steps I threaded ( [fix] note 4 exynos bootloop problem ...... )
PM me for what you get
Sent from my HTC Desire 820s dual sim using Tapatalk
Hello everyone. I used Albe95 N5+S6 Port rom for my GT-i9500 and it worked flawlessly. I had TWRP recovery. After a lot of using I thought to re-flash the rom and start using it new, so I reinstalled the Rom file on my external SD card and flashed the rom using TWRP recovery and it was a success, but then I noticed I accidentally backed up some things which I didn't wanted to I re-flashed the Rom again, but this time when I (in recovery mode) wiped the data, I chose "Advanced Wipe" or "Advanced Reset" (It was something like that I don't exactly remember. So after that I reflashed the rom and when I had to press "Reboot" a message appeared above saying "Looks like super user is not installed in your phone. Do you wish to install it?" I said Yes and the screen went blank. I tried to reboot but It didn't. I removed the battery and then put it back again and tried to get into recovvery but recovery seemed to be lost and I ended up in Samsung's own factory mode where we have options like reboot, flash using external sd card, flash using adb, enable cp logging and etc. I tried to flash back everything but nothing works. Tried Odin and tried flashing custom firmware but it fails. If I reboot Samsung Galaxy S4 GT-i9500 comes on screen and then it goes blank no boot animation or anything like that. Please help me, Your help will be highly appreciated
I used advanced wipe many times before, I'm pretty sure something else caused your dilema.
And most Odin fail messages are caused by the USB cable, PC USB ports (back ports are recommended) and Windows version.
So what should I do now?
If the problems are caused by the above mentioned, you should obviously try to change things up.
It appears that your phone is in soft-brick.
Also, you lost your TWRP.
Check your bootloader version and install the stock firmware via odin. (If you still fail in odin, As GDreaper pointed out, odin fail could cause by usb cable, port and windows version so you need to keep changing until it works)
Root the phone. Reinstall the TWRP.
Then flash the custom rom again. When you install the custom rom please follow the cooker (custom rom maker) instructions on wiping.
Thanks for your comment. I'm kind of a noob, how do I check bootloader version? and how will I know after checking my bootloader version which stock firmware to install?
Bootloader has nothing to do with it.
If you flash a stock firmware, the Bootloader will also be updated to whatever Bootloader the download firmware has.
The only situation where the Bootloader would matter is if you try to go from lollipop to kitkat, in which case it will fail.
Thank you. My device is back now.
I am glad to hear that your problem is solved.
When I was on kit-kat, I did not check my bootloader version and flash the stock firmware with older version of bootloader which tripped the knox counter on my i 9500. That was why I said to check the bootloader version before installing the stock firmware. You can use app like phone info to see the bootloader info. Then install the firmware with the same or newer bootloader.
I recomend to Update drivers, Windows, Bootloader install Samsung Kies and Install TWRP again, After stock