Hello everyone. I used Albe95 N5+S6 Port rom for my GT-i9500 and it worked flawlessly. I had TWRP recovery. After a lot of using I thought to re-flash the rom and start using it new, so I reinstalled the Rom file on my external SD card and flashed the rom using TWRP recovery and it was a success, but then I noticed I accidentally backed up some things which I didn't wanted to I re-flashed the Rom again, but this time when I (in recovery mode) wiped the data, I chose "Advanced Wipe" or "Advanced Reset" (It was something like that I don't exactly remember. So after that I reflashed the rom and when I had to press "Reboot" a message appeared above saying "Looks like super user is not installed in your phone. Do you wish to install it?" I said Yes and the screen went blank. I tried to reboot but It didn't. I removed the battery and then put it back again and tried to get into recovvery but recovery seemed to be lost and I ended up in Samsung's own factory mode where we have options like reboot, flash using external sd card, flash using adb, enable cp logging and etc. I tried to flash back everything but nothing works. Tried Odin and tried flashing custom firmware but it fails. If I reboot Samsung Galaxy S4 GT-i9500 comes on screen and then it goes blank no boot animation or anything like that. Please help me, Your help will be highly appreciated
I used advanced wipe many times before, I'm pretty sure something else caused your dilema.
And most Odin fail messages are caused by the USB cable, PC USB ports (back ports are recommended) and Windows version.
So what should I do now?
If the problems are caused by the above mentioned, you should obviously try to change things up.
It appears that your phone is in soft-brick.
Also, you lost your TWRP.
Check your bootloader version and install the stock firmware via odin. (If you still fail in odin, As GDreaper pointed out, odin fail could cause by usb cable, port and windows version so you need to keep changing until it works)
Root the phone. Reinstall the TWRP.
Then flash the custom rom again. When you install the custom rom please follow the cooker (custom rom maker) instructions on wiping.
Thanks for your comment. I'm kind of a noob, how do I check bootloader version? and how will I know after checking my bootloader version which stock firmware to install?
Bootloader has nothing to do with it.
If you flash a stock firmware, the Bootloader will also be updated to whatever Bootloader the download firmware has.
The only situation where the Bootloader would matter is if you try to go from lollipop to kitkat, in which case it will fail.
Thank you. My device is back now.
I am glad to hear that your problem is solved.
When I was on kit-kat, I did not check my bootloader version and flash the stock firmware with older version of bootloader which tripped the knox counter on my i 9500. That was why I said to check the bootloader version before installing the stock firmware. You can use app like phone info to see the bootloader info. Then install the firmware with the same or newer bootloader.
I recomend to Update drivers, Windows, Bootloader install Samsung Kies and Install TWRP again, After stock
Related
I think i bricked my s4. This is what i've done.
I had echoe illusion rom installed on my s4 and it worked fine but then i wanted to remove it to get a vanilla phone with a simple root. So i deleted cache and everything that you're suppose to do, and it worekd fine i had a vanilla phone with root, then i wanted to use gamekiller 2.6 but that wouldnt work unless i had a custom rom, so i download PAC rom and tried to flash that onto my device by installing zip from odin menu on the phone. it failed because there was a type error in the file and this made my phone brick, I get the message firmware upgrade encountered an issue. please select recovery mode in kies & try again.
what i've tried:
Flash a stock rom using odin (used 4 files, bootloader, pda, phone and csc) did not work it failed.
Re-root the phone. It passes but then it restarts and goes to the startup logo and stay there forever, i left it for half an hour and nothing happened.
flash a custom rom. doesn't work it fail.
use the recovery in kies, doesn't work i dont know what my number is.
I really need help with this as i have important things to do with my phone and i need it on ASAP!
samsung galaxy s4 GT-I9505
If your phone gets download mode there is still a hope..
Reinstall samsung drivers on your pc again. restart it , change your data cable USB port (choice another port), try to flash... sometimes datacables and ports are tricky trolls.
Enviado desde mi Samsung Galaxy S4 I9500
re: stock rom
Frennesson said:
I think i bricked my s4. This is what i've done.
I had echoe illusion rom installed on my s4 and it worked fine but then i wanted to remove it to get a vanilla phone with a simple root. So i deleted cache and everything that you're suppose to do, and it worekd fine i had a vanilla phone with root, then i wanted to use gamekiller 2.6 but that wouldnt work unless i had a custom rom, so i download PAC rom and tried to flash that onto my device by installing zip from odin menu on the phone. it failed because there was a type error in the file and this made my phone brick, I get the message firmware upgrade encountered an issue. please select recovery mode in kies & try again.
what i've tried:
Flash a stock rom using odin (used 4 files, bootloader, pda, phone and csc) did not work it failed.
Re-root the phone. It passes but then it restarts and goes to the startup logo and stay there forever, i left it for half an hour and nothing happened.
flash a custom rom. doesn't work it fail.
use the recovery in kies, doesn't work i dont know what my number is.
I really need help with this as i have important things to do with my phone and i need it on ASAP!
samsung galaxy s4 GT-I9505
Click to expand...
Click to collapse
#1: go to http://SamMobile.com and download the 1 file official firmware for your specific phone's model.(TAR.MD5)
#2: go into recovery and do a complete wipe including Factory Reset, Wipe Cache, Data, System and
Dalvik cache.
#3: odin flash the original stock firmware which you downloaded from http://SamMobile.com
Doing that should fix the problems you are experiencing.
Good luck!
have rooted s5 on 4.4.4 nk2. Have been trying to install custom roms via safestrap. Apparently i am missing a step. I wipe data, try to install twi5ted Lollipop on custom rom slot....blank screen for over 30 min after reboot, phone gets real hot, take battery out. Try to install on stock rom slot, reboot then get stuck in boot loop and keeps booting into system recovery. I then saw through my hours of searching to format instead of wipe....so i format then try to install, get stuck again, take battery out, get back to safestrap dash now when i try to wipe/format/or even restore my backup it says unable to mount system. When i click reboot system it says no OS installed. After reboot, my custom slot gets erased.
I was about to try an odin flash back to stock but some how was able to get my phone back to a system restore. Why can i not get anything installed? Do i have to have odin to do a custom rom install?????? i know every rom is different but wtf. I have seen multiple videos and threads of people flashing zip via safestrap and rebooting into new rom without flashing kernals via odin or safestrap after rom install.
Also...my phone will not let me download zip files (ex. cm12.1) says unable to create download folder....how close to F'in my phone up am i? I have successfully rooted all phones in the past...s5 is giving me hell!
I just tried installing rom after format, then flash nk2 kernel from odin, still gives boot loop....ive tried everything i have found..never this much problem with custom rom..
When you try to install twisted it needs lollipop firmware which is flashed on odin, and based on your statement it says you're on NK2, a kitkat firmware. Try flashing a stock ncg tar and rerouting, downloading apps, etc. on the phone to see if that works. Also, I noticed you mentioned a cm 12.1 zip not downloading which, while unrelated to your current problem, will cause a bootloop when flashed due to the locked bootloader on the S5, so it isn't a smart idea to even attempt an install.
mrjiggywiggy said:
When you try to install twisted it needs lollipop firmware which is flashed on odin, and based on your statement it says you're on NK2, a kitkat firmware. Try flashing a stock ncg tar and rerouting, downloading apps, etc. on the phone to see if that works. Also, I noticed you mentioned a cm 12.1 zip not downloading which, while unrelated to your current problem, will cause a bootloop when flashed due to the locked bootloader on the S5, so it isn't a smart idea to even attempt an install.
Click to expand...
Click to collapse
thanks, i will try fresh from start ncg. so you have to be on the current kernel that you are flashing a rom for, whether its CM, Twi5ted, Alliance...etc i need to be on rooted 5.0 kernel then flash rom via safestrap?
i was having problems downloading from internet on phone, not downloading rom if thats what you thought i meant. I just tried installing zip for CM 12 via safestrap and got same issue. Phone reboots, goes to black screen and eventually heats up like crazy. .... I just noticed, after my restore ...again... it says safestrap disabled in red on the boot screen, why is that? it says installed and tried reinstalling.
FIXED
So i flashed ncg from odin on the messed up phone and got messed up worse. Ended up getting stuck on first boot image of samsung android s5 boot screen. Finally found original stock firmare file and used odin to complete install stock os and got rid of root. Now back to normal... luckily i figured it out my self! thanks to the 100's who viewed and didnt help and thanks to mrjiggywiggy for giving me some input to help out!
2 days ago i flashed twrp on my pure stock note 4, i did backup my rom including EFS using twrp and then flash kyubi rom with nameless kernel, it all went well. just now i wipe data ,system, cache on twrp and restore my backup stock rom and it went well too...and then i try to flash stock rom using odin so i can get back the stock recovery mode for OTA update when MM releases.. the flashing was a sucess and phone booted but my data inside werent wipe.
so i went to recovery mode and saw this dm-verity verification failed on the bottom i proceed to wipe data and reboot my phone, its all working now no problems except i cant reset my phone with the setting inside it will just bring me to recovey mode and stay there with that message.
now i did some research, some saying will bootloop and stuffs but mine is all ok no problem except i cant reset it inside the settings..
anyone can help me get rid of that message/problem?
If you format everything in advance format in twrp and then flash stock firmware this message will go away.
got the same problem. Then I went to a local store. They helped me. Here are steps
1. Pull out your battery, check your serial number (S/N:....)
2. Download smart switch, enter emergency software recovery..... Enter your serial number
3. Turn off your phone. Enter download mode or sth ( I don't remember it clearly. just power + vol down or up. just try it)
4. Smart switch will recognize your phone. Choose a firmware to download. then wait
5. Enjoy stock firmware
Use kies3 reinstall drivers, then use emergency recovery in kies to reinstall your current firmware or opt to update to latest or most recent release or version then follow kies instructions
rooted s5 smg900r4
Hello everyone
I have found a way to fix dm-verity and DRK issues and it works like official, meaning no errors in stock recovery and OTA works with Official firmware, the problem is related to corrupted/deleted 3 files on /efs partition. I have tested it on SM-N910C so I guess it works on other Exynos variants, perhaps even on snapdragon if the partition layout is similar? Kies won't restore DRK or dm-verity check because it doesn't write to EFS. I can fix yours if someone is interested via Team Viewer, you will need the following:
1. PM contact me for Skype ID
2. Stock rom, rooted (any root method)
3. Adb debugging enabled and drivers installed (Kies or SmartSwitch)
After repair you can enter your stock recovery and confirm there is no DRK/dm-verity red letters error.
Regards,
magix01
please guide us the proceedure here .. i have a phone with same problem & i have to update it to MM ...
dork997 said:
If you format everything in advance format in twrp and then flash stock firmware this message will go away.
Click to expand...
Click to collapse
Mine still says fail. but it also says "need to check drk first" could anyone possibly help me im stuck.the phone loads up and everything. but when i try to root or anything or flash any other firmware than n910pvpu5dqi5 it fails about 4 seconds in to flashing on odin. ive downloaded every possible firmware specific to the SM-N910P but only one worked.
im a big noob with the note 4 this is my first luckily its not my daily phone yet. im very familiar with the note 3 n900t but im finding they are very different. any advice would be appreciated!
Sir, please reply
When i unlocked my bootloader on my redmi phone this warning comes, but after clicking power button it will successfully boot to system but i m confused did i flash any rom in it, is it safe or not
Manish_k said:
Sir, please reply
When i unlocked my bootloader on my redmi phone this warning comes, but after clicking power button it will successfully boot to system but i m confused did i flash any rom in it, is it safe or not
Click to expand...
Click to collapse
If you just unlocked your bootloader and thats it, your rom should still be the stock one.
Hello guys
My phone is Galaxy S7 Edge Duos- SM935FD. I seem to have bricked the device.
Below are the actions I have performed.
1. Flashed TWRP using ODIN as described on https://www.the***********.com/root-samsung-galaxy-s7-edge/
2. Booted successfully into the OS. Found superuser app installed.
3. When I went to back to Flash ROM i erased multiple things such as internal storage/dalvik/cache/system after which device got stuck in bootloop. Showing NO OS.
4. I tried flasing Custom ROM Zip files through OTG. The process failed showing package corrupt and still stuck in bootloop.
I can enter recovery/download mode however cant seem to get the device booted. How can I get the device to work either Custom or stock ROM.
I will be going through some threads in the meantime, your guidance is very much appreciated.
Flash stock rom with Odin: This shouldnt be posted on Development Forum but rayher questions and Answers.
Find what your Stock Firmware for your phone is using Sammobile and flash stock then re do rooting and TWRP Process
zzThrain is right -- I wouldn't risk flashing custom ROMs at this stage, especially because many contain new bootloaders or other stuff that might make this even worse for you. Just pick up the relevant Samsung stock ROM file (from, for example, SamMobile) and see if it boots normally again. Once it does, re-do the process *after checking all MD5s of the files you used* -- I, too, have had it happen before that a download went corrupted and I flashed it. If all is well, get into Download Mode and let Odin rip.
rixon.d9 said:
Hello guys
My phone is Galaxy S7 Edge Duos- SM935FD. I seem to have bricked the device.
Below are the actions I have performed.
1. Flashed TWRP using ODIN as described on https://www.the***********.com/root-samsung-galaxy-s7-edge/
2. Booted successfully into the OS. Found superuser app installed.
3. When I went to back to Flash ROM i erased multiple things such as internal storage/dalvik/cache/system after which device got stuck in bootloop. Showing NO OS.
4. I tried flasing Custom ROM Zip files through OTG. The process failed showing package corrupt and still stuck in bootloop.
I can enter recovery/download mode however cant seem to get the device booted. How can I get the device to work either Custom or stock ROM.
I will be going through some threads in the meantime, your guidance is very much appreciated.
Click to expand...
Click to collapse
Go to recovery mode & transfer rom to phone using pc. wipe cache, delvikcache, data only. No need to wipe internal sd. Install rom & reboot.
if you phone goes to recovery or download mode, no need to worry. If it doesn't go to neither recovery nor download mode, them your phone might have probably bricked.
It's my pleasure to help you if you still facing this problem
zzThrain said:
Flash stock rom with Odin: This shouldnt be posted on Development Forum but rayher questions and Answers.
Find what your Stock Firmware for your phone is using Sammobile and flash stock then re do rooting and TWRP Process
Click to expand...
Click to collapse
Hi
I tried flashing stock rom from sammobile. I could find for SM-935FD hence downloaded SM-935F.
It got stuck at 90% showing System in ODIN.
From the ZIP file which is the file that needs to be flashed among below ? I tried AP.
AP_G935FXXU2DRB6_CL12365438_QB16944063_REV00_user_low_ship_meta.tar
BL_G935FXXU2DRB6_CL12365438_QB16944063_REV00_user_low_ship.tar
CP_G935FXXU2DRAG_CL648265_QB8691891_SIGNED.tar
CSC_OJV_G935FOJV2DRAG_CL12785220_QB16560277_REV00_user_low_ship.tar
HOME_CSC_OJV_G935FOJV2DRAG_CL12785220_QB16560277_REV00_user_low_ship.tar
Now when I try again it immediately shows FAIL. Am i Flashing the right stock rom ?
It Worked. Thanks to all who helped.
I wasn't running ODIN as Admin and also was using an slightly older version V3.10.7.
hi
ive got a s8, which was rooted using magisk, but was having issue, so was advised to unroot, remote and try superSU instead.
in the process of flashing stock rom AND 8.0, the phone now boots up to black screen showing verification failed, only option to reset.
when i press reset, all it does is restarts, loads up TWRP which had been installed before,
TWRP runs some program and fails and then phone goes back to black screen showing verification failed.
ive booted it into download mode, in the hope that i can just start again by simply lashing fresh stock rom, but it connects to odin fine, but when i click start, it gives a red error every time.
so i cant access the standard recovery menu as ive got TWRP so that loads instead and it looks as that is corrupted and i cant flash new fresh rom from download as odin brings up issue
ive check another phone and there is no issue with odin or the usb-c cable,
there is an issue with the s8 and odin does not like something in the s8 so wont let me flash anything to it,
any advice would be greatly appreicated.
When you flashed the stock rom using odin did you flash a bootloader aswell as the rom or did you just flash the rom the problem might be that the bootloader was for pie and the rom is oreo or vice versa whenever I flash back to stock I fill all but one of the boxes in odin
i suspect it was all oreo, as i downloaded as a complete file but ill check and get back to you
thanks for advice.