Hi,
Need help in fixing my Note 3...Please
I have Galaxy Note 3 N9005 with android 4.4.2. having ROM model N9005ZHUENH4_N9005ZZHENH4_TGY
I downloaded Android V 5.0 ROM from Sammobile with country TGY same as that of already working ROM.
I started the mobile in download mode and burned the ROM but it failed at cache.img with invalid Ext4 error
I downloaded many other ROMs for N9005 from sammobile and only few loaded successfully. However all the ROMs flashed successfully result in inactive wifi.
So I am now running mobile with no wifi.
Please help...
What do you mean rom burning ?? Heating or flashing ??
What is your phones original firmware ??
i'm also facing this problem when i flash Samsung Official Firmwares (kitkat & lollypop) on my Note 3 SM-N9005.. after flashing Wifi button becomes irresponsive so that i cant switch on my wifi..
But When i do flash any custom ROM ( like blisspop, Dark Lord , Phorensesis etc) , this wifi problem is not occured..
if u got any solution , plz post it.. thanks in advance
JJEgan said:
What do you mean rom burning ?? Heating or flashing ??
What is your phones original firmware ??
Click to expand...
Click to collapse
By burning I meant flashing new ROM
Original firmware is N9005ZHUENH4_N9005ZZHENH4_TGY and mobile is not rooted.
Now re-flashing the stock ROM downloaded from sammobile fails at cache.img with invalid Ext4 error
However the following ROMS loads successfully but Wifi greyed and not enabling/working
N9005XXUGBOD6_N9005AMOGBOD2_AMO
N9005XXUGBOF1_N9005BTUGBOD2_N9005XXUGBOD3_HOME.tar.md5
N9005XXUGBOG4_N9005OJVGBOG2_N9005XXUGBOD3_HOME.tar.md5
N9005XXUGBOJ6_N9005XEOGBOJ1_XEO
N9005XXUGNG1_N9005AMOGNH1_N9005XXUGNG1_HOME.tar.md5
N9005XXUGNG1_N9005XEOEND2_alexndr.tar.md5
N9005XXUGBOD6_N9005AMOGBOD2_N9005XXUGBOD1_HOME.tar.md5
N9005XXUGBOJ6_N9005XEOGBOJ1_N9005XXUGBOJ1_HOME.tar.md5
same issue
i also faced the same issue and can't fix it till now
but some said that there is a driver file could be uploaded through odin will fix it as it's a driver sw issue not hardware
so do anyone know from where can we find this file plz?
HELP
Hi XYAN78, I had the same isse as you, I also upgraded from kitkat 4.4.2 to the latest TGY rom through Odin, I finally fixed it. Here are the things you can try :
1. Try wipe cache, data from recovery then shut down and take out the battery, then startup the phone again. You may try a few times.
2. If 1. not work, try do :
-wipe data/cache in recovery.
-flash rom througn Odin( don't tick the auto restart check Box), when odin flash finish, reboot into recovery and wipe data&cache. Shut down and take out the battery.
-boot into download mode directly, and flash the rom again.
(You may ned try more time this cycle in order to to fix it. Good luck)
leohk said:
Hi XYAN78, I had the same isse as you, I also upgraded from kitkat 4.4.2 to the latest TGY rom through Odin, I finally fixed it. Here are the things you can try :
1. Try wipe cache, data from recovery then shut down and take out the battery, then startup the phone again. You may try a few times.
2. If 1. not work, try do :
-wipe data/cache in recovery.
-flash rom througn Odin( don't tick the auto restart check Box), when odin flash finish, reboot into recovery and wipe data&cache. Shut down and take out the battery.
-boot into download mode directly, and flash the rom again.
(You may ned try more time this cycle in order to to fix it. Good luck)
Click to expand...
Click to collapse
Hi leohk,
i tried your steps but not working...
actually i cannot reload my actual ROM TGY 4.4.2. Few working ROMs as given in my last post are loading successfully.
Can you tell what TGY ROM you have successfully flashed and from where you downloaded that . as i have tried almost all tgy roms from sammobile... I have noticed a zip file error in the TGY ROMs downloaded from sammobile
XYAN78 said:
Hi leohk,
i tried your steps but not working...
actually i cannot reload my actual ROM TGY 4.4.2. Few working ROMs as given in my last post are loading successfully.
Can you tell what TGY ROM you have successfully flashed and from where you downloaded that . as i have tried almost all tgy roms from sammobile... I have noticed a zip file error in the TGY ROMs downloaded from sammobile
Click to expand...
Click to collapse
Originally I was on Kitkat: N9005ZHUENJ1 and then flash the Lollipop N9005ZSUGOI1, I use Winrar and when try the zip file test also failed but after installed the latest version of Winrar, it passed the test. btw, when Odin do the flash it will test the MD5 check also, so if it can pass the MD5 test step in Odin flash process then the file should be fine.
below is the Lollipop Rom I flashed, and I followed the instruction there also.
http://www.sammobile.com/firmwares/download/57235/N9005ZSUGOI1_N9005OZSGOI1_TGY/
I remember I tried the process around 4-5 time before I can get the wifi issue fixed. I have a 16G HK version Note 3.
Hi leohk,
I tried the method but it is not working. The TGY ROMS gives ext4 error at cache.img. other ROMS as in my above post loads but without Wifi. So, still without Wifi...
my mobile is 32GB HK version maybe that is the reason.
I also noticed mobile heating up after flash/factory reset is it normal??
Thanks for sharing your experience.
Hi All,
After wandering over the internet to solve my problem i finally resolved it.
I changed my approach to problem instead of focusing on wifi to work with ROMS loading successfully; i focused on ext4 error while flashing with original TGY stock ROM.
After googling and going through many forums I found the solution that worked
The solution was to flash the stock TGY ROM with pit file "CSB_signed_HLTE_EUR_OPEN_32G_0805" and voila...
This pit file is available on the internet.
Initially I loaded original TGY stock ROM 4.4.2 which worked and Wifi not greyed this time.
Afterward I loaded TGY ROM 5.0. The second time without pit file and it was fine.
After re-partition with CSB_Signed_HLTE_EUR_OPEN_32G_0805, what are size of the partition of System, Cache and Hidden of your Note3?
My 32G N9005 is with same wifi problem after flashing latest TGY LL stock ROM. I found System partition size is of 2.2GB but the size of System partition derived from PIT file should be 2.9GB.
Related
Hey guys
I have a Hong Kong Note 3 N9005. Yesterday I flashed the 4.4.2 sammobile update to my phone using ODIN 3.09. I had auto reboot and f.reset ticked. The ROM was put in AP and I hit start. Then I received the error Invalid ext4 Image. Turns out that Hong Kong versions of the N3 cannot install European ROMs. Since then I have not been able to boot my device into android. I just loop into download mode telling me it detected a firmware update. Kies was no help.
The update DID update the bootloader, so now I cannot go back to stock ROM. I have tried a few things. I tried flashing the stock Hong Kong ROM MK1, it fails. So i found a guy that fixed a similar problem buy removing the aboot.mbn file and repacking the ROM. Tried that too and the ROM flashes but it leaves me in a bootloop. Phone turns on says booting recovery then restarts. I also tried cf-root in an effort to flash another ROM still not working. I cannot get into recovery mode no matter what I do.
It seems I have run out of ideas and am reaching out for help.
Robbbie said:
Hey guys
I have a Hong Kong Note 3 N9005. Yesterday I flashed the 4.4.2 sammobile update to my phone using ODIN 3.09. I had auto reboot and f.reset ticked. The ROM was put in AP and I hit start. Then I received the error Invalid ext4 Image. Turns out that Hong Kong versions of the N3 cannot install European ROMs. Since then I have not been able to boot my device into android. I just loop into download mode telling me it detected a firmware update. Kies was no help.
The update DID update the bootloader, so now I cannot go back to stock ROM. I have tried a few things. I tried flashing the stock Hong Kong ROM MK1, it fails. So i found a guy that fixed a similar problem buy removing the aboot.mbn file and repacking the ROM. Tried that too and the ROM flashes but it leaves me in a bootloop. Phone turns on says booting recovery then restarts. I also tried cf-root in an effort to flash another ROM still not working. I cannot get into recovery mode no matter what I do.
It seems I have run out of ideas and am reaching out for help.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2507403 flash this with cwm or twrp should work
jaythenut said:
http://forum.xda-developers.com/showthread.php?t=2507403 flash this with cwm or twrp should work
Click to expand...
Click to collapse
Hello thanks for replying.
Only problem is I cannot get into cwm or twrp. Any advice on what I can do to try to get CWM or twrp working? I can flash with ODIN. But with the CWM I tried it still just boot loops and does not allow me to get into recovery.
Thank in advanced.
Robbbie said:
Hey guys
I have a Hong Kong Note 3 N9005. Yesterday I flashed the 4.4.2 sammobile update to my phone using ODIN 3.09. I had auto reboot and f.reset ticked. The ROM was put in AP and I hit start. Then I received the error Invalid ext4 Image. Turns out that Hong Kong versions of the N3 cannot install European ROMs. Since then I have not been able to boot my device into android. I just loop into download mode telling me it detected a firmware update. Kies was no help.
The update DID update the bootloader, so now I cannot go back to stock ROM. I have tried a few things. I tried flashing the stock Hong Kong ROM MK1, it fails. So i found a guy that fixed a similar problem buy removing the aboot.mbn file and repacking the ROM. Tried that too and the ROM flashes but it leaves me in a bootloop. Phone turns on says booting recovery then restarts. I also tried cf-root in an effort to flash another ROM still not working. I cannot get into recovery mode no matter what I do.
It seems I have run out of ideas and am reaching out for help.
Click to expand...
Click to collapse
Same Issue here. I tried to install the 4.4.2 N9005XXUENA6_N9005OXXENA5_N9005XXUENA2 update on my Note 3 via odin 3.09.
Got an ext4 update failed error.
After this, the phone's bricked and is stuck on the Kies Recovery Screen. I tried to go into recovery mode in Kies, but it says this model does not have initialization.
I tried installing a 4.3 N9005XXUDMK3_N9005TNLDMK1_N9005XXUDMK2, but again failed. Download mode shows SW REV CHECK FAIL : [aboot] Fused 3 > Binary 2
Can someone please guide me to unbrick my phone?
I don't know what ROM I was on initially. It was the stock ROM that came with the phone.
I dont have CWM and TWRM installed.
Robbbie said:
Hey guys
I have a Hong Kong Note 3 N9005. Yesterday I flashed the 4.4.2 sammobile update to my phone using ODIN 3.09. I had auto reboot and f.reset ticked. The ROM was put in AP and I hit start. Then I received the error Invalid ext4 Image. Turns out that Hong Kong versions of the N3 cannot install European ROMs. Since then I have not been able to boot my device into android. I just loop into download mode telling me it detected a firmware update. Kies was no help.
The update DID update the bootloader, so now I cannot go back to stock ROM. I have tried a few things. I tried flashing the stock Hong Kong ROM MK1, it fails. So i found a guy that fixed a similar problem buy removing the aboot.mbn file and repacking the ROM. Tried that too and the ROM flashes but it leaves me in a bootloop. Phone turns on says booting recovery then restarts. I also tried cf-root in an effort to flash another ROM still not working. I cannot get into recovery mode no matter what I do.
It seems I have run out of ideas and am reaching out for help.
Click to expand...
Click to collapse
Got this response from MrAndroid12 in another thread I'd started:
"This is not a brick at all. Just add a .pit file and restart the upgrade via Odin again.
You should be fine."
I don't know how to add a .pit file though.
I am certain the bootloops are because it flashed the new bootloader. I think your best option is to wait for a dev like indie to release Omega V7 and try to flash that through Odin.
Or if you can extract the different partitions from the original thread you can try push them one by one with Odin.
hallydamaster said:
I am certain the bootloops are because it flashed the new bootloader. I think your best option is to wait for a dev like indie to release Omega V7 and try to flash that through Odin.
Or if you can extract the different partitions from the original thread you can try push them one by one with Odin.
Click to expand...
Click to collapse
It is the bootloader yes. But it NEEDS the bootloader to be able to boot in to KitKat. And there is no downgrading once you've installed the new BL.
Best option is to re-flash via ODIN again and not wait 2 weeks for a Dev to modify a custom ROM...
Solution
Here is the solution:
http://forum.xda-developers.com/showpost.php?p=49426283&postcount=14
m1ndst0rm said:
Here is the solution:
http://forum.xda-developers.com/showpost.php?p=49426283&postcount=14
Click to expand...
Click to collapse
Works thanks
Sent from my SM-N9005 using XDA Premium 4 mobile app
I will try to explain me clearly
My phone is working normally and I can restore nandroid without issues
I'm actually with my V29 KK TW and work without issues
BUT If i flash aosp or cm rom, just afeter enter pin code, the screen becomes black like problem with proximity sensor
I can put my hand in front, it doesn't change, If I push the buttons, sometimes the screen appears and disappears immediately
and the more strange is I have this problem with the RR 5.3.9 I had flashed before without issue and can restore a nandroid I have done with it...
I have done a clean flash of my KK TW V29 without issue....
first I have made a FULL wipe include internal storage and flash stock NI4 rom but without any changes
someone got an idea???
thank's
I have flashed successfully 2 QS L differents versions but can't with CM roms (euphoria, tema, RR...)
is there a reason to that
This is x-files troubles, personally I reflash stock LP with Odin and all is good now
I have try back with RR 5.3.9 and got same problem but if I restore nandroid from 5.3.9 it's working without issues...WTF!!!!!!!!!!!!
i try to flash L stock rom with odin root, complete wipe (except ext sdcard)
I run masik script wipe and ael cleaner, format boot, system data
It seem's it begin when I flash arter kernel or the UKM (universal kernel manager) to run civ kernel..
so i try to uninstall ukm but allways without succes
I flashed 4.4 c-rom without issues, so I flashed back KK rom with odin and back to my V29 kk rom
look my signature to have details on my config
thank's for the help..
So...first question:
Did you ever take the official lollipop update from samsung?
Second Question:
What country are you in, and carrier do you use?
Please message me the following details from the sticker inside the device under the battery, so I can grab the Service files from samsung for you!
I've flashed OB1 with odin and flash back after 2 weeks NI4 and the last I try was this N9005XXUFNG2_N9005OXXFNG3_XEF (Open France) (No-wipe)
the flash goes well but doesn't change my BL and modem, before that I was with NI4 BL and NI3 modem and now still with that
I use sosh carrier (orange) in france
will send you the details from sticker
@rayman95 This is what i have found out!!! From my understanding, You took the Lollipop bootloader when you installed the OC1 Package. if you want to completely restore to "Earlier Version", WHICH this may not be possible due to a SAMSUNG new coding issue, You would need to have the complete 4 Files software to repair your device.... As well as using all the following checkboxes in ODIN:
Auto-Reboot
Re-Partition
F. Reset Time
NAND Erase ALL
Phone Bootloader Update
I Attempted to download your files for the device, but Kies will Not "Initialize" for download, and it will give you an Error if you plug the device into Kies3 i believe because you device is ROMMed.
IF you want to try Kies to restore AND it begins "DOWNLOADING", You can copy the Tmp****.tmp.zip that is created when the progress indicator hits 85% in Kies.
The File location on Win7 is "C:\Users\*Your Screen Name HERE*\AppData\Local\Temp"
If you Have the 4 Part file for NI2, try flashing in ODIN wioth the Above Checkboxes selected!!
Kies don t let me dl any files and gave me some error but don't remember exactly what... but not important because you give me good files.....after that I hope flashing again cm12.1.....
Thank so again chief....
Hi guys
I recently flashed OD4 Stock Lollipop to my phone via Odin with PIT file. It flashed fine but device randomly freezes, pc doesn't detect it (although downloading mode is fine) and the worst is DEVICE DOESN'T WAKE UP SOMETIMES. It just doesn't respond to buttons. It randomly reboots as well. My device had no issues since I flashed via Odin. What can I do???? I have backups from an aosp rom and a custom Touchwiz.
Device : I9500 With 32GB SD
Stock Rom and Stock Kernel
No root >> Can do it if its necessary
Thx.
batuhur said:
Hi guys
I recently flashed OD4 Stock Lollipop to my phone via Odin with PIT file. It flashed fine but device randomly freezes, pc doesn't detect it (although downloading mode is fine) and the worst is DEVICE DOESN'T WAKE UP SOMETIMES. It just doesn't respond to buttons. It randomly reboots as well. My device had no issues since I flashed via Odin. What can I do???? I have backups from an aosp rom and a custom Touchwiz.
Device : I9500 With 32GB SD
Stock Rom and Stock Kernel
No root >> Can do it if its necessary
Thx.
Click to expand...
Click to collapse
Well, you could a another solution that for others is risky but it's not, if you follow the steps carefully. Flash your correct firmware (with the correct pit for this firmware) with odin 3.10 and check f reset time, auto reboot and Nand Erase All (you will loose ALL your internal data), re-partition (as you have PIT file), and Phone Bootloader Update. When flashing process is finished, the system will reboot to stock recovery and will appear an android repairing, after it it will reboot in Samsung startup but it will not boot, so you must boot to recovery with power+volup, wipe data/factory reset, and wipe cache again. Then reboot and wait, it may take up to five or six minutes approx.
i leave attached an odin version that is woking fine.
I hope it helps.
regards
izmaelzx said:
Well, you could a another solution that for others is risky but it's not, if you follow the steps carefully. Flash your correct firmware (with the correct pit for this firmware) with odin 3.10 and check f reset time, auto reboot and Nand Erase All (you will loose ALL your internal data), re-partition (as you have PIT file), and Phone Bootloader Update. When flashing process is finished, the system will reboot to stock recovery and will appear an android repairing, after it it will reboot in Samsung startup but it will not boot, so you must boot to recovery with power+volup, wipe data/factory reset, and wipe cache again. Then reboot and wait, it may take up to five or six minutes approx.
i leave attached an odin version that is woking fine.
I hope it helps.
regards
Click to expand...
Click to collapse
Alright man I did everything you said and IT WORKED! THX VERY MUCH!! I had a 5.0.1 Chinese Firmware on my PC's hdd (4 files + special PIT) and i flashed it with your Odin and it went good. But I didnt have the Google Play Store on The CHN firmware so I restored my Prism backup and its working flawlessly now. Before flashing the CHN, the backup had the same Lockscreen issue. Now I have the CHN bootloader also. But when I flash the latest OD4 from sammobile (1 file + PIT from another site) It just doesnt flash (FAILED!). So I tried with NAND Erease etc.. then it worked, BUT THE SAME ISSUE AGAIN! What is wring with the OD4? Im on Prism now (flashed CHN before restoring). I want the stock OD4 because its updated. Do I need to flash OD4 with 4 files or with a special PIT?
(sorry for bad english)
Thx
batuhur said:
Alright man I did everything you said and IT WORKED! THX VERY MUCH!! I had a 5.0.1 Chinese Firmware on my PC's hdd (4 files + special PIT) and i flashed it with your Odin and it went good. But I didnt have the Google Play Store on The CHN firmware so I restored my Prism backup and its working flawlessly now. Before flashing the CHN, the backup had the same Lockscreen issue. Now I have the CHN bootloader also. But when I flash the latest OD4 from sammobile (1 file + PIT from another site) It just doesnt flash (FAILED!). So I tried with NAND Erease etc.. then it worked, BUT THE SAME ISSUE AGAIN! What is wring with the OD4? Im on Prism now (flashed CHN before restoring). I want the stock OD4 because its updated. Do I need to flash OD4 with 4 files or with a special PIT?
(sorry for bad english)
Thx
Click to expand...
Click to collapse
Try flashing OD4 this time ticking auto reboot, re-partition, bootloader update, and f reset time, but without flashing the pit file, only the tar.md5 (if so) in AP. As i know the pit for china differs from other countries cause that, google and some bloatwate, and as far i know, OD7 firmware doesn't come with an seperate pit file. You must factory reset before doing this.
Regards.
Hi,
I tried to downgrade my Note 3 with CSC VIA to Kitkat VIA. Downloaded and flashed firmware from Sammobile. Didn't work. failed in ODIN though it finished.
I tried it again and now i can flash Kitkat with ODIN "passed" but I'm stuck in bootloop. Full wipe and cache clean in recovery won't work. Tried it a last time with Kitkat DBT version (debranded) and added a PIT file by Darklord for 1DBT. ODIN says passed but the bootloop still is there. Download mode is still available so i see some real chance to get it done.
Is it possilbe to debrand to DBT that easily or shall I stay on VIA? I never tried the PIT file for DBT with VIA firmware. Anyone has a clue what I might try to get it working again? Ah btw. Recovery and Download seems to be perfectly fine and Knox isn't triggered.
Your input is highly appreciated, thanks in advance!
peety25 said:
Hi,
I tried to downgrade my Note 3 with CSC VIA to Kitkat VIA. Downloaded and flashed firmware from Sammobile. Didn't work. failed in ODIN though it finished.
I tried it again and now i can flash Kitkat with ODIN "passed" but I'm stuck in bootloop. Full wipe and cache clean in recovery won't work. Tried it a last time with Kitkat DBT version (debranded) and added a PIT file by Darklord for 1DBT. ODIN says passed but the bootloop still is there. Download mode is still available so i see some real chance to get it done.
Is it possilbe to debrand to DBT that easily or shall I stay on VIA? I never tried the PIT file for DBT with VIA firmware. Anyone has a clue what I might try to get it working again? Ah btw. Recovery and Download seems to be perfectly fine and Knox isn't triggered.
Your input is highly appreciated, thanks in advance!
Click to expand...
Click to collapse
Try this:
1. Full wipe first (system, data, cache and dalvik)
2. Flash the VIA Kit Kat firmware via ODIN unticking "Autoreboot".
3. Take out the battery and pull in it again when the flashing process finish.
4. Boot in Recovery and make full wipe again.
5. Reboot your device and it should boot normally.
6. Tell me if it worked for ya
Hi,
thanks for you input. I tried it - still the bootloop. So I made a try with the current version (installed before). This works - most likely because I'm unable to clean Dalvik with the standard recovery.
Anyhow in the end I'm not happy with the outcome because of the bluetooth issues of the new version. Anybody has a suggestion how to downgrade sucessfully - I'd happily install a CM12.1 as well but a nightly without installation advice seems to be a bit too much for me.
try flashing MODEM with NON-HLOS, I think you have corrupted the EFS.
peety25 said:
Hi,
thanks for you input. I tried it - still the bootloop. So I made a try with the current version (installed before). This works - most likely because I'm unable to clean Dalvik with the standard recovery.
Anyhow in the end I'm not happy with the outcome because of the bluetooth issues of the new version. Anybody has a suggestion how to downgrade sucessfully - I'd happily install a CM12.1 as well but a nightly without installation advice seems to be a bit too much for me.
Click to expand...
Click to collapse
You can flash TWRP recovery if you don't care about KNOX and follow my steps above :highfive:
So i was going to install a custom ROM on my g530h via twrp, and im new to this
I downloaded the file that the app asked me to, and acidentally flashes It as a boot, not as a recovery, now the phone just stays in the download mode, and I cant install the stock ROM with Odin, It gives me a different setor every time
Please help
What file did you actually install like what model was it exactly for ?
Post some screenshots of odin.
try watchin this.. i also have the same problem this week but i find the ways to fix it just flash the stock firmware of g530h xcu using odin so i use the xcu phil firmware which is 4.4.2 and it works.. just flash the stock firmware.. hope it helps...
Do you have any other method because when I rooted the divice I deleted some system files then lost USB connection with pc I tried may way to make it back like downloading the driver from Samsung nothing work and tried different stock rooms and custom ones all of them had the error 7 or md5 file not found by the the same thing happened with the os I made the boot to recovery by accident and lost the system .
Hi buddy
I am in a huge problem a friend gave me his sm-g530h duos to upgrade it's firmware to 5.0.2 i downloade one from sammobile & flashed it but it stuck on logo & not booting to recovery only download mode.then i tried to flash many other lollipop roms but every odin said fail.please help