Database Users

[GUIDE][MicromaxA120][EASY][Fix invalid IMEI]

Many of you might be getting INVALID IMEI after flashing any custom rom or After formating Your Rom
THis IS Guide is Help You
I see Many Method TO Get BAck Imei
But Trust Me THis is Very Easy Method
ANd AND Important MAny Of Who Are in MIcromax A120 8GB C2C kitkat After MAny try They Can't Root there phone But via THis Method Wil You
INSTRUCTION
1.IF YOu Are In Kitkat Than Flash YOur Phone With JellyBean
2. Root Your Phone With Farmaroot
3.THan INstall A CWM via UNcle Tool
4. THan GO in Recovery Flash FOTA KITKAT ROM
5.Now YOu see YOu are in stock kitkat ROm And YOur ROm IS Rooted
NOW IMportant
6.Open THe MTK Droid Root & Tools v2.5.3 Give them A Root Access BY Clicking ROOT
7. Now THe pop up IS Open CLick Ok
8.Now Grant the access From Your Phone
9.Now YOur Phone IS Connected
10.NOw CLick On a NVRAM/IMEI
11 NOw A Pop Up open Enter Your IMEI No. And CLick ON A Replace Imei ANd NOw Restart Your Phone
THat Sit Now YOur IMEI BAck
I know IS Somthing Lengthy But it is Safe And Simple
THanks TO UMAngLekha
HE MAde A FLashable FOTA Kitkat ROm
Downloads
http://forum.xda-developers.com/android/development/rom-canvas-2-colours-t2866498FOTA KITKATROM
http://d-h.st/PAnFarmaRoot
Flash ON YOur Risk
And DO On Your RIsk
iF YOU know Already how to FLash A Rom \ THen THere IS No RIsk
IF YOu LIke MY POSt HIt ON LIKe Boutton

Need help
I am not even able to flash CTR recovery how come I even try flashing JB ROM.
I am on A120 Stock 4.4.2 (8 GB Variant) and while trying to flash recovery, I am getting the error as "PMT changed for the ROM it must be downloaded"
Please see attached screen shot.

Nice

Thanks

kool_sandy said:
I am not even able to flash CTR recovery how come I even try flashing JB ROM.
I am on A120 Stock 4.4.2 (8 GB Variant) and while trying to flash recovery, I am getting the error as "PMT changed for the ROM it must be downloaded"
Please see attached screen shot.
Click to expand...
Click to collapse
First go to sp flash tool then click on format option then click on start..
Now connect your device without battery.
After format process done, you have no any wrong message appering in process of flashing.
Sorry for bad English.
If your probl. Solve, then hit like..

kool_sandy said:
I am not even able to flash CTR recovery how come I even try flashing JB ROM.
I am on A120 Stock 4.4.2 (8 GB Variant) and while trying to flash recovery, I am getting the error as "PMT changed for the ROM it must be downloaded"
Please see attached screen shot.
Click to expand...
Click to collapse
Choose the scatter file that came with the downloaded zip
Cheers

Ain't that a bit much work for new IMEI's?
I found the easiest way to (temporarily) fix the IMEI is like this: http://meandmywiko.blogspot.de/2016/04/wiko-rainbow-repair-fix-invalid-imei.html
Only thing you need is root (delivered on stock at CM13). If you still have problems to get through to your phone: My phone recently went totally black ( no charging lights, no nothing ) and I fixed it like also descripted on the blog.

mnksngh706 said:
Many of you might be getting INVALID IMEI after flashing any custom rom or After formating Your Rom
THis IS Guide is Help You
I see Many Method TO Get BAck Imei
But Trust Me THis is Very Easy Method
ANd AND Important MAny Of Who Are in MIcromax A120 8GB C2C kitkat After MAny try They Can't Root there phone But via THis Method Wil You
INSTRUCTION
1.IF YOu Are In Kitkat Than Flash YOur Phone With JellyBean
2. Root Your Phone With Farmaroot
3.THan INstall A CWM via UNcle Tool
4. THan GO in Recovery Flash FOTA KITKAT ROM
5.Now YOu see YOu are in stock kitkat ROm And YOur ROm IS Rooted
NOW IMportant
6.Open THe MTK Droid Root & Tools v2.5.3 Give them A Root Access BY Clicking ROOT
7. Now THe pop up IS Open CLick Ok
8.Now Grant the access From Your Phone
9.Now YOur Phone IS Connected
10.NOw CLick On a NVRAM/IMEI
11 NOw A Pop Up open Enter Your IMEI No. And CLick ON A Replace Imei ANd NOw Restart Your Phone
THat Sit Now YOur IMEI BAck
I know IS Somthing Lengthy But it is Safe And Simple
THanks TO UMAngLekha
HE MAde A FLashable FOTA Kitkat ROm
Downloads
http://forum.xda-developers.com/android/development/rom-canvas-2-colours-t2866498FOTA KITKATROM
http://d-h.st/PAnFarmaRoot
Flash ON YOur Risk
And DO On Your RIsk
iF YOU know Already how to FLash A Rom \ THen THere IS No RIsk
IF YOu LIke MY POSt HIt ON LIKe Boutton
Click to expand...
Click to collapse
You can try it via Engineer Mode available in MTK Devices

[Q] Need Help!!!!!! Phone Stuck at Samsung Logo

I am currently new to all this stuff so i dont have an exact idea what i was doing
First of all i rooted my Device I9500 Which had 5.0.1 Android
then i installed TWRP Recovery and then i was not able to backup any stuff to External SD Card so i installed some Boot.img which i exactly dont remember which i installed from watching any youtube video then later some problem occured It showed some error like "firmware upgrade encountered an issue" then i flashed Philz touch recovery which then worked and i was able to backup my data but i was not able to Boot into my Original ROM or couldnt see an option for that. Then i downloaded The Ozcan V6.3 ROM and tried installing it it succesfully installed but after that its not able to boot uo and stuck at SAMSUNG Logo Screen.
Please Help me What to DO !!!.
Thanks In Advance

If your device can still get into download mode, download the stock Android 5.x image for your device and flash it using Odin. That will get you back to square one so you can start over with rooting and installing the custom ROM.

I had the same problem on my gs4. It would only go to galaxy logo so I flashed the lollipop firmware via odin and all is well.
Sent from my GT-I9505 using XDA Free mobile app

Just have to flash the default one with Odin ?
i also backed up my old data with philz to my sd card that also and i also downloaded a new Default 5.0.1 ROM ?
Which one should i flash ?
and whats the critera for finding ROMs leaving the model number ? (noob question)

Is the S4 unlocked? If not, what country are you in and what carrier do you have?

My Country is India and its the International Version I9500 and i am not pretty sure that it was unlocked or not .but it was rooted and recovery was installed
Added later :
I just installed recovery back and then tried to install ROM the ROM was also stuck on the Boot Loop I think my boot loader isnt unlocked and ima stuck there because of that

I9500 isnt bootloader locked. And u must be flashing the boot.img on other partition that not in the odin package. So u must search how to repartition ur device. But. U MUST VERY CAREFULL WITH REPARTITION OPTION! U MIGHT BRICK UR DEVICE IF U DONT UNDERSTAND WHAT U DOING!. And if u wanna flash recovery and boot.img or bootloader thing. U must ONLY flash for I9500 version!. And if u successfully repartition ur device. U will lose all internal storage too. Ok good luck

Utkarsh_Chaudhary said:
My Country is India and its the International Version I9500 and i am not pretty sure that it was unlocked or not .but it was rooted and recovery was installed.
Click to expand...
Click to collapse
You would know if you were carrier unlocked as you'd be able to put a SIM from a different carrier into the S4 and have the device work. To get you the correct ROM we still need to know your carrier.

secure download : enabled
Hi my galaxy s4 gt i9500 is stuck in a bootloop. When is boot I get "firmware upgrade encountered an issue. Please select recovery mode in kies and try again"... when I boot into download mode I see "secure download : enabled" which wasn't usually there. Am trying to flash the pit file with twrp but Odin is failing.... is it because of the secure download enabled?? Please help me

You can't flash the PIT file with TWRP.
Do you have Odin? Do you have a copy of your stock ROM, downloaded either from Sammobile or samsung updates? If not, you'll need to get them. You then flash the firmware through Odin WITHOUT the PIT file. This should restore your device to operating condition. Afterward, you will of course need to root the S4 and flash a copy of TWRP to be able to install a custom ROM.

Carrier is Airtel

New S3A not booting and 4032 error on flash

I was wondering if somebody has got this before with the Jiayu S3A? I tried to flash a new S3A yesterday by spflashtool because it was delivered with a non rooted rom. Tried to flash an older 5.1 rom in order to flash custom recovery later on (and then 7.1.1 ofcourse ). However it gave me an error (PMT changed for the ROM, it must be downloaded) and some pages on google suggested a format (without bootloader) so I did that. After that I succesfully flashed a rom version 5.1 but when I tried to flash custom recovery or other roms, it kept giving the error message BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) and the phone won't boot. Tried different roms and with/without battery, different settings, different drivers but I still can't flash a rom nor boot the device. Maybe the battery was drained in the process (it is now on a charger for a night). Or maybe it was a S3+ or something, sold with the wrong type?(The box and label on the telephone said JY-S3 and it had 32 gb so it can not be a S3+ right?) Never had this problem before with other S3's so I'm hoping that someone can help me! Thanks in advance.

Sounds like you messed things up completely by flashing the Lollipop ROM and formatting. You git the S3A with 32 GB RAM, right? Afaik this comes preinstalled with Marshmallow and there is no compatible Lollipop ROM for the S3A 32 GB.
If I were you I would try to flash stock MM again. If you really flashed Lollipop with formatting option in SP Flash Tool, you probably need to format, too. Make sure that the phone boots again. Next, flash TWRP recovery from m.a.d. team through SP Flash Tool. Finally flash the m.a.d. Nougat ROM, nano GAPPS and SuperSu in recovery.

Sim not detected (Please Help)

I was on stock KK ROM . I wanted to try the Mokee 7.1.1 so it went to twrp flashed the KK2LP firmware switch zip and then did a clean wipe and flashed Mokee and gapps . It was stuck in the boot animation. So I went to twrp and flashed the ED300 cm12.1 and it booted .And after rebooting both the SIM cards are not getting detected. But the carrier names are written cannot connect to network. Again I flashed the Mokee and error was also present in that.
So I reverted back to stock LP ROM by flashing stock recovery for LP and flashing the System.zip from the LP OTA zip that I had.
It flashed successfully and on booting it too didn't show the network but the carrier names are present.
Please provide a fix for this .

Flash Modem NONHLOS.bin one
Yeah Eat pizza and Chill check IMEI aswell

dev_harsh1998 said:
Flash Modem NONHLOS.bin one
Yeah Eat pizza and Chill check IMEI aswell
Click to expand...
Click to collapse
How to flash that bro. Where can I find that.
Procedure to flash it too.
IMEI number is present. The problem is only with the network connection.

Brother are these the file that you have said.

yes

Sim Card Error ! Plz Help

I'm used Lenovo a6k plus. When I flashed Lenovo rooted stock rom( deodexed) the sim card not detected it say sim card not ready. Then I flashed other custom ROM but same problem occurs. I'm very feared what can I do plz help me how can I fixed this. I'm try many other custom Roms but result will same. Plz help me.

I have solution
Bro first of all test those sim cards in another mobile , if they were fine then you have two remove both sim cards from your device and then reboot to recovery and flash stock rom (if you have kk based rom installled then flash only kk based pure official stock rom only or if you have lollipop/marshmallow /naughat based rom installed then you have to flash only stock pure official lolipop rom ) . For flashing stock lolipop rom first extract that package and move system.zip and another country named file which one you want i recommend you to use your own country file , after that flash only these to system.zip and country zip via recovery first flash system.zip and then country zip and then super su . And after flashing stock rom don't forget to flash your twrp recovery ( for example- for stock kitkat flash kitkat based twrp.img and for stock lolipop flash lolipop based twrp.img and then flash any supersu.zip file ) remember the step of flashing twrp recovery again before rebooting otherwise you will permanently loose your twrp and root access .This simcard error comes from persist partition (you can easily see this option during mounting any file system in twrp recovery) . I am damn sure that you accidentally wiped this partition , but don't worry if this is not a hardware related problem you can easily make your device to work properly with your sims, Another tip please flash those stock roms without sim cards and don't insert sim cards until your phone turns on for first time after that you will switch off your phone and insert sims. Wolla you got your sim connection back. I am again saying flash stock rom only without any sim . If these steps dont work contact me via WhatsApp - +91 9205097520 or simply reply me on xda or mail me at [email protected] . I hope you understand the steps :good: .
And don't forget to tell me about your device problem.

sometimes the sim slot is loose for sims when we put in our micro-sim my Telenor PK works flawlessly on both slot 1&2 while i couldnt get my Jazz/Warid one to work and the solution was to add a piece of paper on the sim over slot 2 to get it read otherwise im sure your issue was resolved by the previous person who posted