My father gave me his dead phone to fix. He said he dropped it in water and has been working nice until he rebooted to "installing sytem update", then goes the yellow triangle with dead droid and the stock recovery comes up.
No custom recovery, no root, no custom rom.
I naturally tried to flash a stock firmware (6.0.1, BP6), and failed. I tried with a 4 files firmware (same, 6.0.1, BP6) and aye, it passes on Odin but boots exactly the same (installing system update etc).
Then I tried to downgrade, to root, to everything, but the FRP LOCK is On and seems to screw up.
I tried to find a 4 files 5.1.1 firmware but couldn't find any working, maybe I didn't find the right one I don't know (France, XEF).
I get a different fail on Odin each time I'm trying to flash something, like there is always a reason to fail.
The best I get is with the 4 files 6.0.1 but still, I'm stuck on stock recovery.
What can I do ? I can't believe I'm stuck forever, I'm pretty sure it can be fixed, unless you guys tell me I'm wrong and the battle is over...
I can't believe no one has any idea
did you tried any other country software for this?
give it a shot.it might work
Yes I did
I gave it to a guy who has a box to get rid of the google limitation..
Related
Bought a 'new" Note 4 and right of the bat, I rooted the phone, flashed a custom rom, followed instructions one by one, last time I did this was 2 years ago. Everything was great, but wasn't able to call or text on a Sprint network, but had LTE/3G data.
I downloaded the stock firmware from SamMobile, cant flash it with Odin, it crashes right away with some error "BEX". So, copying the firmware to my sd card and installing it thru TWRP or PhilzTouch, instantly crashes, says install aborted and when it reboots, the Samsung powered by android is displayed and than keeps re-booting about every 10 seconds.
At this point, I at least want the phone to run stock. But is much harder than I thought it would be. IS there something im missing or not doing right?
HI all,
So I today I messed up and I need your help :crying:. Basically here's whats going on: I decided to root my phone since I found that battery was complete garbage, so I decided to root the phone with TWRP and Odin and after flash a new kernel for my phone as well as SU. Everything went fine. However, when i tried to reboot my phone to get a custom rom i wanted, it keps telling "kernel is not seandroid enforcing" and would be stuck in a boot loop (which apparently is normal and would just need to flash a rom for it to work). Finally I just decided to boot factory, so I can get to my files and put that damn custom rom. Long story short, I was able to put it, wiped system in TWRP and flashed this new rom only to get another error "THis package is for device trltetmo, this device is trltexx". Now I couldnt even factory reset anymore. At this point I decided to flash my back up that I did before and yet ANOTHER problem "cannot restore system mounted read only". After couple of hours of research, I needed to change the name of the file to system.image.mbn i think, I changed a file called system.ext --> system.image.ext. Needless to say that it didnt work. Final thing I decided to do is simply to flash a stock rom with odin and reverse the root, so I downloaded a stock rom for note 4, started the whole process with odin and now it is stuck at system.img.ext4....and i have no clue what to do, I dont know even know what I did before is the problem or it is something else, all i know is that odin is stuck at that message. Should I just let it go, should I stop it? Help! please
Wow, true hardship you get it back running?
Try using Kies and doing firmware upgrade mode to see if it can download and load the stock firmware for that device.
Hello, my SM-G935A is rooted, and I have 2 issues with it. Firstly, I'm unable to receive texts or phone calls (I can send them), and I've tried a factory reset and I even got a new SIM, but nothing worked. I think if I flash stock firmware, it might fix the issue. Second problem, when I go into download mode and select my AP in Odin and press start, my phone gets an error and Odin freezes at Initialization.
Any help would be appreciated. I would prefer to fix the texting issue, as I don't want to return the phone to ATT. In either case, the Odin issue needs to be fixed
I'm having a similar issue. This afternoon, 2 apps threw errors and closed. I rebooted, which apparently was the wrong thing to do. The reboot stalled on the AT&T logo and stayed that way for 5 min - the unit became very hot & the power button did not respond, even while holding it down. I got into recovery, cleared the cache and factory reset, then rebooted. The unit came back up and started reinstalling everything. I took it back down into the download status and attempted to reload 935x via Odin, only to stall at "initialzation" [sic] as you did. I got out of that after waiting for some sort of response. SuperSU was still in my apps as was Root Checker. Root Checker indicates the system is rooted. SuperSU indicates it needs the binary updated. BusyBox and TiBu indicate they cannot find root. I deleted all the root apps and tried reinstalling root via adb which completed successfully, but the same outcome with all the root apps. So I'm not sure if I'm still really rooted as Root Checker claims, or not.
EDIT: I just saw that I have 2 "Knox Settings" apps. Clicking on either returns, "Unfortunately, Container Agent2 has stopped."
use the odin from the stock firmware thread to flash it again. if it fails you can flash the u firmware and then the stock again. then you have to use a different odin if you want to flash the root api file the one you flash the firmware with wont work. also there is help in one of the threads about fixing the volte problem so you dont have to turn it off to get calls. i didnt have to do it as using the odin i mentioned fixed it for me when i came from the u firmware.
NovaEDMâ„¢ said:
Hello, my SM-G935A is rooted, and I have 2 issues with it. Firstly, I'm unable to receive texts or phone calls (I can send them), and I've tried a factory reset and I even got a new SIM, but nothing worked. I think if I flash stock firmware, it might fix the issue. Second problem, when I go into download mode and select my AP in Odin and press start, my phone gets an error and Odin freezes at Initialization.
Any help would be appreciated. I would prefer to fix the texting issue, as I don't want to return the phone to ATT. In either case, the Odin issue needs to be fixed
Click to expand...
Click to collapse
I was having the exact same problem you had with Odin. It seemed I was able to flash stock firmware using this version of Odin: http://www.mediafire.com/download/2t2sjqxtogbkafk/odin_3.12.3.rar
rob219 said:
use the odin from the stock firmware thread to flash it again. if it fails you can flash the u firmware and then the stock again. then you have to use a different odin if you want to flash the root api file the one you flash the firmware with wont work. also there is help in one of the threads about fixing the volte problem so you dont have to turn it off to get calls. i didnt have to do it as using the odin i mentioned fixed it for me when i came from the u firmware.
Click to expand...
Click to collapse
did you have any problems with the u version of the s7 edge firmware, like the fingerprint scanner not responding? i am on that version and cant get any odin version or any version of s7 edge g935a firmware to flash, tried unrooting and was forced to use the U version of the s7 edge firmware, everything works except the fingerprint scanner, cant get back to full stock firmware, need help!
im having the exact same problem, when i put my phone into download mode and flash the stock at&t firmware, Odin get stuck in "initialization" and my phone screen displays and error message.
Same stuff was happening to me, I went back to stock and took the update. When your phone stops working as an actual phone, it's time to roll it back.
I played with it for a week and my phone was so freaking hot (with hot weather) equals a wait and see if this gets more stable in the near future. I did use the Odin 3.12.3 mentioned by King James III. Honestly, I did so many things to get it back to stock I forget what actually worked (it was the wee hours of the morning and I was spent). Don't give up guys, it will and can work.
edit: It may be as simple as not right clicking Odin and running it as Administrator.
nicetucu said:
Same stuff was happening to me, I went back to stock and took the update. When your phone stops working as an actual phone, it's time to roll it back.
I played with it for a week and my phone was so freaking hot (with hot weather) equals a wait and see if this gets more stable in the near future. I did use the Odin 3.12.3 mentioned by King James III. Honestly, I did so many things to get it back to stock I forget what actually worked (it was the wee hours of the morning and I was spent). Don't give up guys, it will and can work.
edit: It may be as simple as not right clicking Odin and running it as Administrator.
Click to expand...
Click to collapse
I used Odin_v3.12.3_Patched_SHA256 to flash the 935U Firmware then used Odin3_v3.11.2 to flash the June Firmware release.
I'd attempted (and succeeded) in rooting the s7 Edge without much of a problem, it seemed to be working fine. I was considering flashing a custom ROM as well, but before I could get to that point the phone started behaving oddly. It would refuse to boot, freezing at the AT&T logo screen and vibrating in a 1-3 pattern (1 vibration, then pause, then 3, etc., ad nauseum). I realised I still had ADB access at that point in boot (somehow, I have no idea) and used it to reboot to bootloader and see what I could do with Odin.
ALL VERSIONS of Odin I have tried (3.12, 3.12.3, PrinceComsy variants of both) have failed to restore the stock image and unroot the device. I have attempted to use multiple different stock images I've found around these forums and elsewhere, and all attempts have resulted in either the phone throwing an error about the Odin version I'm using, or Odin itself telling me that the flash failed and the phone indicating some strange message about the boot or the firmware being 'fused' or something. Exact error is SW REV CHECK FAIL : [system]Fused 3 > Binary 1
All I appear to have accomplished is preventing the device from ever booting properly -- it refuses to boot normally, and by default enters Recovery mode (the stock recovery, which is essentially useless and won't do anything at all). I would very much appreciate some help getting this device off the ground again; I'm sure we can figure something out together! As I type this, I am attempting yet another version of the stock firmware I've dug up, so... fingers crossed that gets some better results. If not... please help. Currently trying the APK1 version of the stock firmware.
Cheers,
vexx32
vexx32 said:
I'd attempted (and succeeded) in rooting the s7 Edge without much of a problem, it seemed to be working fine. I was considering flashing a custom ROM as well, but before I could get to that point the phone started behaving oddly. It would refuse to boot, freezing at the AT&T logo screen and vibrating in a 1-3 pattern (1 vibration, then pause, then 3, etc., ad nauseum). I realised I still had ADB access at that point in boot (somehow, I have no idea) and used it to reboot to bootloader and see what I could do with Odin.
ALL VERSIONS of Odin I have tried (3.12, 3.12.3, PrinceComsy variants of both) have failed to restore the stock image and unroot the device. I have attempted to use multiple different stock images I've found around these forums and elsewhere, and all attempts have resulted in either the phone throwing an error about the Odin version I'm using, or Odin itself telling me that the flash failed and the phone indicating some strange message about the boot or the firmware being 'fused' or something. Exact error is SW REV CHECK FAIL : [system]Fused 3 > Binary 1
All I appear to have accomplished is preventing the device from ever booting properly -- it refuses to boot normally, and by default enters Recovery mode (the stock recovery, which is essentially useless and won't do anything at all). I would very much appreciate some help getting this device off the ground again; I'm sure we can figure something out together! As I type this, I am attempting yet another version of the stock firmware I've dug up, so... fingers crossed that gets some better results. If not... please help. Currently trying the APK1 version of the stock firmware.
Cheers,
vexx32
Click to expand...
Click to collapse
You have to use either the stock version of the firmware that your phone was on or newer. You can't use any older versions. APK1 is the latest version i believe. Use the official Odin. The .12 version and you should be good.
dirtydodge said:
You have to use either the stock version of the firmware that your phone was on or newer. You can't use any older versions. APK1 is the latest version i believe. Use the official Odin. The .12 version and you should be good.
Click to expand...
Click to collapse
Thankyou. It took me longer than it really should to figure out which firmware version to load. Downloading that now... fingers crossed, heh.
Do you think it's worth attempting to re-root and install a modified ROM on it for the performance tweaks that I've seen cropping up here and there? Or should I just count it lucky it's still mostly salvageable?
vexx32 said:
Thankyou. It took me longer than it really should to figure out which firmware version to load. Downloading that now... fingers crossed, heh.
Do you think it's worth attempting to re-root and install a modified ROM on it for the performance tweaks that I've seen cropping up here and there? Or should I just count it lucky it's still mostly salvageable?
Click to expand...
Click to collapse
Depends on what you want. Personally i would root it and go to the Verizon forum and download Stang5.0litre rom. That's an awesome rom. I'd stay away from echoe rom, seems like the devs are hit or miss on support. The dev for the stang rom is awesome and very active. I ran both of then and prefer stange.
dirtydodge said:
Depends on what you want. Personally i would root it and go to the Verizon forum and download Stang5.0litre rom. That's an awesome rom. I'd stay away from echoe rom, seems like the devs are hit or miss on support. The dev for the stang rom is awesome and very active. I ran both of then and prefer stange.
Click to expand...
Click to collapse
Woah, woah, what? You can flash a rom based on another carrier? Will it still work? O.O
vexx32 said:
Woah, woah, what? You can flash a rom based on another carrier? Will it still work? O.O
Click to expand...
Click to collapse
Yea it works. I know that one does. You'll get a message that says "unauthorized SIM card: or something like that. Just ignore it and use WiFi to setup the phone. Once you have it setup use package disabler or titanium to freeze "setup wizard" and that'll get rid of that notification. You'll have to manually setup your AT&T APN. After that your golden.
Hi All,
So, I have spent 2 days trying to get my Galaxy s8+ back to normal. However, I seem to only have made it worse. It all happened when I decided to change the /data partition from ext4 to another format and then back again to get the /data partition to mount in TWRP after flashing Pascal Rom. However when I rebooted, nothing worked, no boot up screen, no recovery, no life, but all I could get was download mode. It then must of froze up after another restart and I couldn't get anything for 12 hours or so.
The next step I tried once i got download mode again was to flash stock firmware for the G955F, I can't remember the version of this firmware, but I still had nothing change. So then i flashed the latest firmware from SamFirm's downloading client, which was G955FXXU2CRF7 - Australian Optus Branded Firmware (OPS). I was able to get as far as the "hello start screen" and then my phone restarted, it then tried to upgrade my system again, then started "erasing" and then it rebooted and I still had the same issue, nothing but download mode and still no recovery, it still wouldn't turn on. So I flashed the latest International/Unbranded Australian firmware (XSA) - G955FXXU3CRGH, still the same result. I now can't go back to the OPS version of firmware because I get the Check error with the bootloader (since it's a more recent version), so I can't go backwards. I also can only flash "Official Binaries" now. Oh and to make things worse, I read that Odin Option "Nand Erase" just erased user data, so I thought I might as well try it, and as a result, I now can't flash even the (XSA) firmware because of ODIN failing and I now have an "An Error has Occurred while updating the device software. Use the emergency recovery function in the smart switch PC Software.". I am a bloody idiot :good: . Oh, I have tried multiple versions of Both Samsung Kies & Smart Switch (Which both had the option for "recovery & initialisation"), however, I get a message that my device is unsupported after adding in my device model and S/N. I tried a PIT file and then found out it's now included in all the latest firmware img files.. so yeah lol. Fun times. Soooo I feel like I am out of Options, nothing I do is working. The worst of all this is my wife is not happy haha which means after years of tinkering with android phones (flashing custom ROMS, Kernels, Root Solutions, e.c.t ), this may be the end of the road for me if I can't fix this phone. I really hope this thread isn't true too : https://forum.xda-developers.com/galaxy-s8+/help/sm-g955fd-access-download-mode-t3748228
So Please, someone help me out if it is at all fixable even if it requires opening the phone up lol.
The stats i have on download mode are the following:
RMM State as Prenormal
OEM Lock: OFF
FRP Lock: OFF
CARRIER_ID: OPS (which is super weird because it only accepts XSA to be flashed :S )
Secure download: Enabled
System Status: Custom
Warranty Void: 1
Current Binary: Samsun Official
If you need more, just let me know.
Ok, quick update: I have got rid of the error that I mentioned. I managed to flash XSA firmware again, it went to the blue Andriod is updating the system screen, then started "erasing" then rebooted and nothing again, still only download mode available. Nothing happens when I try to turn it on or try recovery mode.
This firmware you mentioned XSA - G955FXXU3CRGH i would double check. As far as I know Australia doesn't have a version 3 bootloader yet whether unbranded.telstra or Optus.
Quick Update: Maybe Fixed now!
Even though no one has replied yet, as it's only been an hour or so. I just wanted to let anyone else know who is experiencing a similar issue in the future on how to possibly fix it.
This was a real nightmare, however quick disclaimer, I am not responsible for any damage incurred to your device/property by following my instructions.
So the way I have fixed it, is I flashed the AP file only (from the firmware zip i had downloaded from SamFirm) with "Auto Reboot" Off. When ODIN finished, I held the Vol Down + power button, to reset it. It gave me a blue "No Command" Screen, I then waited and it then went black and the recovery screen appeared. I cleared the cache, rebooted to bootloader, which it didn't turn back on, so I left it because I thought it was the same thing. Came back 10 mins later and turned it on (or hard restarted, can't remember) and it worked. It booted!
I did soon learn it looks like it was having a charging problem because it had no charge and kept telling me there was water in the port (even though it was dry), I restarted it again after putting it on a wireless charging pad and it is seeming fine so far with the USB charger. So big note to anyone in the future, that it could be possibly bugging out with charging as well if you can't get it back on. I did have the device tell me here and there the last two days that there was water in the port when it was off. So kinda weird.
I know this all sounds a little hocus pocus, superstitious almost, but hey, my phone is working, so maybe replicating my actions may just help lol. :cyclops:
spawnlives said:
This firmware you mentioned XSA - G955FXXU3CRGH i would double check. As far as I know Australia doesn't have a version 3 bootloader yet whether unbranded.telstra or Optus.
Click to expand...
Click to collapse
Oh right, well, I did hear that SamFirm is not supported anymore, as that's where that firmware came from. Maybe it's dishing out incorrect firmware now? Possible the structure of where ever it is getting its firmware from (pretty sure it's pulled from samsung) has possibly been altered?
Just for reference I use www.updato.com for downloading firmware it is usually up to date. No reference to the firmware you mentioned (not for Australia anyway)
The screenshot I took: Imgur link:
https://imgur.com/a/lqyzWW7
Interesting I'll keep a lookout for it. Still on nougat 7.0 (XSA) no plans to upgrade yet until some issues are fully resolved ( out of beta stage that is ).
spawnlives said:
Interesting I'll keep a lookout for it. Still on nougat 7.0 (XSA) no plans to upgrade yet until some issues are fully resolved ( out of beta stage that is ).
Click to expand...
Click to collapse
Yeah, it's seeming to work now, but my fast charge isn't working. However, my other oreo ROM didn't work with fast charge either. So i am unsure if it is my phone or an orio bug :/ lol
Well at least you got it working and not using as a door stop
that was really sad story man.....
spawnlives said:
Well at least you got it working and not using as a door stop
Click to expand...
Click to collapse
Yeah haha, so glad it's not a door stop haha