Hello, my SM-G935A is rooted, and I have 2 issues with it. Firstly, I'm unable to receive texts or phone calls (I can send them), and I've tried a factory reset and I even got a new SIM, but nothing worked. I think if I flash stock firmware, it might fix the issue. Second problem, when I go into download mode and select my AP in Odin and press start, my phone gets an error and Odin freezes at Initialization.
Any help would be appreciated. I would prefer to fix the texting issue, as I don't want to return the phone to ATT. In either case, the Odin issue needs to be fixed
I'm having a similar issue. This afternoon, 2 apps threw errors and closed. I rebooted, which apparently was the wrong thing to do. The reboot stalled on the AT&T logo and stayed that way for 5 min - the unit became very hot & the power button did not respond, even while holding it down. I got into recovery, cleared the cache and factory reset, then rebooted. The unit came back up and started reinstalling everything. I took it back down into the download status and attempted to reload 935x via Odin, only to stall at "initialzation" [sic] as you did. I got out of that after waiting for some sort of response. SuperSU was still in my apps as was Root Checker. Root Checker indicates the system is rooted. SuperSU indicates it needs the binary updated. BusyBox and TiBu indicate they cannot find root. I deleted all the root apps and tried reinstalling root via adb which completed successfully, but the same outcome with all the root apps. So I'm not sure if I'm still really rooted as Root Checker claims, or not.
EDIT: I just saw that I have 2 "Knox Settings" apps. Clicking on either returns, "Unfortunately, Container Agent2 has stopped."
use the odin from the stock firmware thread to flash it again. if it fails you can flash the u firmware and then the stock again. then you have to use a different odin if you want to flash the root api file the one you flash the firmware with wont work. also there is help in one of the threads about fixing the volte problem so you dont have to turn it off to get calls. i didnt have to do it as using the odin i mentioned fixed it for me when i came from the u firmware.
NovaEDM™ said:
Hello, my SM-G935A is rooted, and I have 2 issues with it. Firstly, I'm unable to receive texts or phone calls (I can send them), and I've tried a factory reset and I even got a new SIM, but nothing worked. I think if I flash stock firmware, it might fix the issue. Second problem, when I go into download mode and select my AP in Odin and press start, my phone gets an error and Odin freezes at Initialization.
Any help would be appreciated. I would prefer to fix the texting issue, as I don't want to return the phone to ATT. In either case, the Odin issue needs to be fixed
Click to expand...
Click to collapse
I was having the exact same problem you had with Odin. It seemed I was able to flash stock firmware using this version of Odin: http://www.mediafire.com/download/2t2sjqxtogbkafk/odin_3.12.3.rar
rob219 said:
use the odin from the stock firmware thread to flash it again. if it fails you can flash the u firmware and then the stock again. then you have to use a different odin if you want to flash the root api file the one you flash the firmware with wont work. also there is help in one of the threads about fixing the volte problem so you dont have to turn it off to get calls. i didnt have to do it as using the odin i mentioned fixed it for me when i came from the u firmware.
Click to expand...
Click to collapse
did you have any problems with the u version of the s7 edge firmware, like the fingerprint scanner not responding? i am on that version and cant get any odin version or any version of s7 edge g935a firmware to flash, tried unrooting and was forced to use the U version of the s7 edge firmware, everything works except the fingerprint scanner, cant get back to full stock firmware, need help!
im having the exact same problem, when i put my phone into download mode and flash the stock at&t firmware, Odin get stuck in "initialization" and my phone screen displays and error message.
Same stuff was happening to me, I went back to stock and took the update. When your phone stops working as an actual phone, it's time to roll it back.
I played with it for a week and my phone was so freaking hot (with hot weather) equals a wait and see if this gets more stable in the near future. I did use the Odin 3.12.3 mentioned by King James III. Honestly, I did so many things to get it back to stock I forget what actually worked (it was the wee hours of the morning and I was spent). Don't give up guys, it will and can work.
edit: It may be as simple as not right clicking Odin and running it as Administrator.
nicetucu said:
Same stuff was happening to me, I went back to stock and took the update. When your phone stops working as an actual phone, it's time to roll it back.
I played with it for a week and my phone was so freaking hot (with hot weather) equals a wait and see if this gets more stable in the near future. I did use the Odin 3.12.3 mentioned by King James III. Honestly, I did so many things to get it back to stock I forget what actually worked (it was the wee hours of the morning and I was spent). Don't give up guys, it will and can work.
edit: It may be as simple as not right clicking Odin and running it as Administrator.
Click to expand...
Click to collapse
I used Odin_v3.12.3_Patched_SHA256 to flash the 935U Firmware then used Odin3_v3.11.2 to flash the June Firmware release.
Related
Hi,
I've been do many flash last 24 hours on my Galaxy S4(Model SGH-I337M, Telus). Initialy, i've the factory stock rom, rooted. So, yesterday, i've decided to install Cyanogen mods nightly on my phone. Not the first time i've been used it on my phone. No problem before. So, this night, after a friend show me the release canditate release seem to be more stable, i've been try to put it on my phone. So, accidentaly wipe all the data on my phone. When i'm back home, i've put again the samsung original rom from my operator(4.2.2), found here, on the website, whit odin. All completed succefully, but i've noticed that the wifi won't turn on after the flash, and no sound from the speaker. So, i've put Cyanogen nigthlies again to test if it rom relative, but same issues here, no sound, but the wifi was working. The phone was very instable, so. Then, finaly, put the original rom again, without any rooting. Stuck on samsung logo, that i've finaly got fixed by clear the data and cache. But, no sound, and no wifi. Instable too.
Precision about phone: Unlocked whit the service mode(work), and enabled AWS whit a software and file(tutorial found here)
My question is: Anything else i can do to make my phone work fine again, and does it's possible to make the phone totaly stock? When i boot up, i've noticed that the phone, whit all rom i've try, said on samsung logo: Kernel is not sendroid enfonced, warranty status: kernel, so i can't go to return my phone on warranty whit that. How i can erase that line, and make my phone seem to be no modified?
Just to specify, it's not the first time i flash a phone. Do many flash, whit galaxy s2, s3 and s4, and sure, mine. Got try Cyanogen, stock, know how Odin work and all, try many rom, and before today, never has any problem to do turn back, but now, it's seem to be impossible.
Thank you very much for your help, very appreciated!
I would flash the stock firmware with odin again. After flashing do a factory reset in the stock recovery.
jd1639 said:
I would flash the stock firmware with odin again. After flashing do a factory reset in the stock recovery.
Click to expand...
Click to collapse
I've just try this. Flash the stock rom whit odin, and factory reset on original recovery after. Same, no wifi, no any sound.
Just see yesterday, when i'm flashing, i'm flashing on the bootloader in odin(whit the tar for the stock rom). Today, correct this by flash on the pda section, still not work. Found here on the forum the stock bootloader, rom, csc, and modem, but when i do this whit odin, odin said fail.
Thank very much, i think my phone is dead, and nothing to do to exchange it on warranty.
I think Kies has an emergency firmware recovery mode.... maybe that'll work.
Found a nice guide here: http://forum.xda-developers.com/showthread.php?t=2261153
saj222 said:
I think Kies has an emergency firmware recovery mode.... maybe that'll work.
Found a nice guide here: http://forum.xda-developers.com/showthread.php?t=2261153
Click to expand...
Click to collapse
Just try this. Kies is the worst software i've ever see. The software completely freeze random. When i go to the emergency menu, never, kies recognize my phone here. I've tried to plug my phone, no recognized. Tried without plug it, no recognized. When i plug it, kies said connection in progress, and can stay here 30 min.
I'm a idea of what is my problem. Before do install of cyanogen, i've been applied the samsung official 4.3 update, whit knox. And, according to what i read on many forum, knox is not ereasable, So, it's completely freeze my phone, and nothing to do.
Anyone have the factory telus bootloader and other factory stock items because i want to put it stock.
Thank.
Finally get problems fixed by take the TELUS stock 4.3 ROM and flash it whit Odin. After, can flash cyanogen nightlies again and the phone work well again.
Whit the stock ROM, didn't see any line on the Samsung boot logo that i've rooted. After root this appear again. Knox regardless of ROM installed said 0x1.
If anyone have a fix to put it again 0x0 very appreciated otherwise the phone work fine and thank you very much for your help.
dardares said:
Just try this. Kies is the worst software i've ever see. The software completely freeze random. When i go to the emergency menu, never, kies recognize my phone here. I've tried to plug my phone, no recognized. Tried without plug it, no recognized. When i plug it, kies said connection in progress, and can stay here 30 min.
I'm a idea of what is my problem. Before do install of cyanogen, i've been applied the samsung official 4.3 update, whit knox. And, according to what i read on many forum, knox is not ereasable, So, it's completely freeze my phone, and nothing to do.
Anyone have the factory telus bootloader and other factory stock items because i want to put it stock.
Thank.
Click to expand...
Click to collapse
I've seen worse software, it's no better or worse than iTunes.
Sent from my SGH-I337M using Tapatalk
dardares said:
Finally get problems fixed by take the TELUS stock 4.3 ROM and flash it whit Odin. After, can flash cyanogen nightlies again and the phone work well again.
Whit the stock ROM, didn't see any line on the Samsung boot logo that i've rooted. After root this appear again. Knox regardless of ROM installed said 0x1.
If anyone have a fix to put it again 0x0 very appreciated otherwise the phone work fine and thank you very much for your help.
Click to expand...
Click to collapse
can u plz give me link for the flash file u just flash
i have same problem here after i flash with 4.2.2 no sound and phone freez all time
i like to flash 4.3 so i can fix my phone
thanks
mps5566 said:
can u plz give me link for the flash file u just flash
i have same problem here after i flash with 4.2.2 no sound and phone freez all time
i like to flash 4.3 so i can fix my phone
thanks
Click to expand...
Click to collapse
This is the link i've found whit all the factory stock operator ROM. This is what rescue me.
http://forum.xda-developers.com/showthread.php?t=2269304
@Spacemonkie4207 never my itune was freeze, and i can do basic operation like transfer music or create playlist without any problem. My kies stay on connection in progress, and turn, turn, turn, but never connect. And when it connect, only one operation, and kies completely freeze, stop responding, need to close it, and open it again. Tried many cable, usb cable, reinstalling software, two other computer, but nothing to do.
I recovered back to stock from custom to 4.3 however if you do so, depending on carrier you could lose root and the ability to install custom recovery.
I would revert back to 4.2.2 (as it's knox free) go to samsungupdates (google it) and pull the 4.2.2 for your region and carrier. flash with odin 3.9
you'll lose root, but you can always perform again as long as not on 4.3 (with 4.3 u can still root if you remove all the knox stuff, u just lose warranty).
Az
Hello everyone,
My phone just recently started having this issue, where the screen freezes when it first turns on. If I try plugging it in to charge, it freezes on the battery charging screen; there is no animation that indicates that it is charging. I've tried going into recovery mode but all there is is something that says "MMC: mmc_read fail Movinand Checksum Confirmation Fail". I can, however, go into download mode, where I can install a custom OS. It seems that this screen functions fine and my instinct is telling me that if I want to continue to use my phone, I'll have to reinstall the firmware. I'm not interested in installing a custom OS but I do just want to get my phone back. I did not do anything to my phone, I turned it off for a flight and when I landed, I turned it on and it started freezing when I tried using it. I was able to send out a few texts before it froze and I had to restart the phone but then it just wouldn't get past the Samsung Galaxy S5 screen.
Thank you for your help.
If I understand correctly your phone is not rooted ? Then only a factory reset will help you I think ...
In my experience, a factory reset will fix that, but wipe data also. On S3 and Note 3, I have Odin'ed stock firmwares over stock firmwares before and it has retained the data while fixing the problem. You may want to look into this method.
BCSC said:
In my experience, a factory reset will fix that, but wipe data also. On S3 and Note 3, I have Odin'ed stock firmwares over stock firmwares before and it has retained the data while fixing the problem. You may want to look into this method.
Click to expand...
Click to collapse
I've sort of looked into the Odin method but I'm still slightly confused and a little reluctant do so without clear instructions. Do you know of a particularly good tutorial that could help me with this? I do want to retain some of the data.
Thank you for your help, if this doesn't work, I'll probably just factory reset it.
allsheneedewassome said:
I've sort of looked into the Odin method but I'm still slightly confused and a little reluctant do so without clear instructions. Do you know of a particularly good tutorial that could help me with this? I do want to retain some of the data.
Thank you for your help, if this doesn't work, I'll probably just factory reset it.
Click to expand...
Click to collapse
Its quite simple. Donwload your region firmware from sammobile or from the firmware thread, open odin 3.07 (later versions have issues). Don't change any settings but do make sure "repartition" is NOT checked as this may cause brick. Click on "pda". Select the firmware you just downloaded. Now boot phone into download mode, I believe its vol down home and power pressed altogether. Dismiss the warning and connect your phone. Finally once it says "added" press start. Thats it, good luck!
@non4 said:
Its quite simple. Donwload your region firmware from sammobile or from the firmware thread, open odin 3.07 (later versions have issues). Don't change any settings but do make sure "repartition" is NOT checked as this may cause brick. Click on "pda". Select the firmware you just downloaded. Now boot phone into download mode, I believe its vol down home and power pressed altogether. Dismiss the warning and connect your phone. Finally once it says "added" press start. Thats it, good luck!
Click to expand...
Click to collapse
This is correct.
So they other night i tried rooting my gs7 edge AT&T version.. Found a tutorial online and flashed a file via odin. And upon rebooting ended up freezing on the AT&T boot logo. which seemed to a common problem after reading the comments. The only way was to do a factory reset which i did and got the phone working again. But now the phone is extremely sluggish it lags doing the simplest tasks. Now i want to start over and flash the stock firmware via odin but not sure what files to flash something about pi2 and the BL. Can some one point out to me what is the latest firmware i should be installing. Just trying to go back to stock here.
brusslesprouts said:
So they other night i tried rooting my gs7 edge AT&T version.. Found a tutorial online and flashed a file via odin. And upon rebooting ended up freezing on the AT&T boot logo. which seemed to a common problem after reading the comments. The only way was to do a factory reset which i did and got the phone working again. But now the phone is extremely sluggish it lags doing the simplest tasks. Now i want to start over and flash the stock firmware via odin but not sure what files to flash something about pi2 and the BL. Can some one point out to me what is the latest firmware i should be installing. Just trying to go back to stock here.
Click to expand...
Click to collapse
You still have the eng kernel installed. Go to the AT&T forum for the S7 and you will see what others have done.
I'd attempted (and succeeded) in rooting the s7 Edge without much of a problem, it seemed to be working fine. I was considering flashing a custom ROM as well, but before I could get to that point the phone started behaving oddly. It would refuse to boot, freezing at the AT&T logo screen and vibrating in a 1-3 pattern (1 vibration, then pause, then 3, etc., ad nauseum). I realised I still had ADB access at that point in boot (somehow, I have no idea) and used it to reboot to bootloader and see what I could do with Odin.
ALL VERSIONS of Odin I have tried (3.12, 3.12.3, PrinceComsy variants of both) have failed to restore the stock image and unroot the device. I have attempted to use multiple different stock images I've found around these forums and elsewhere, and all attempts have resulted in either the phone throwing an error about the Odin version I'm using, or Odin itself telling me that the flash failed and the phone indicating some strange message about the boot or the firmware being 'fused' or something. Exact error is SW REV CHECK FAIL : [system]Fused 3 > Binary 1
All I appear to have accomplished is preventing the device from ever booting properly -- it refuses to boot normally, and by default enters Recovery mode (the stock recovery, which is essentially useless and won't do anything at all). I would very much appreciate some help getting this device off the ground again; I'm sure we can figure something out together! As I type this, I am attempting yet another version of the stock firmware I've dug up, so... fingers crossed that gets some better results. If not... please help. Currently trying the APK1 version of the stock firmware.
Cheers,
vexx32
vexx32 said:
I'd attempted (and succeeded) in rooting the s7 Edge without much of a problem, it seemed to be working fine. I was considering flashing a custom ROM as well, but before I could get to that point the phone started behaving oddly. It would refuse to boot, freezing at the AT&T logo screen and vibrating in a 1-3 pattern (1 vibration, then pause, then 3, etc., ad nauseum). I realised I still had ADB access at that point in boot (somehow, I have no idea) and used it to reboot to bootloader and see what I could do with Odin.
ALL VERSIONS of Odin I have tried (3.12, 3.12.3, PrinceComsy variants of both) have failed to restore the stock image and unroot the device. I have attempted to use multiple different stock images I've found around these forums and elsewhere, and all attempts have resulted in either the phone throwing an error about the Odin version I'm using, or Odin itself telling me that the flash failed and the phone indicating some strange message about the boot or the firmware being 'fused' or something. Exact error is SW REV CHECK FAIL : [system]Fused 3 > Binary 1
All I appear to have accomplished is preventing the device from ever booting properly -- it refuses to boot normally, and by default enters Recovery mode (the stock recovery, which is essentially useless and won't do anything at all). I would very much appreciate some help getting this device off the ground again; I'm sure we can figure something out together! As I type this, I am attempting yet another version of the stock firmware I've dug up, so... fingers crossed that gets some better results. If not... please help. Currently trying the APK1 version of the stock firmware.
Cheers,
vexx32
Click to expand...
Click to collapse
You have to use either the stock version of the firmware that your phone was on or newer. You can't use any older versions. APK1 is the latest version i believe. Use the official Odin. The .12 version and you should be good.
dirtydodge said:
You have to use either the stock version of the firmware that your phone was on or newer. You can't use any older versions. APK1 is the latest version i believe. Use the official Odin. The .12 version and you should be good.
Click to expand...
Click to collapse
Thankyou. It took me longer than it really should to figure out which firmware version to load. Downloading that now... fingers crossed, heh.
Do you think it's worth attempting to re-root and install a modified ROM on it for the performance tweaks that I've seen cropping up here and there? Or should I just count it lucky it's still mostly salvageable?
vexx32 said:
Thankyou. It took me longer than it really should to figure out which firmware version to load. Downloading that now... fingers crossed, heh.
Do you think it's worth attempting to re-root and install a modified ROM on it for the performance tweaks that I've seen cropping up here and there? Or should I just count it lucky it's still mostly salvageable?
Click to expand...
Click to collapse
Depends on what you want. Personally i would root it and go to the Verizon forum and download Stang5.0litre rom. That's an awesome rom. I'd stay away from echoe rom, seems like the devs are hit or miss on support. The dev for the stang rom is awesome and very active. I ran both of then and prefer stange.
dirtydodge said:
Depends on what you want. Personally i would root it and go to the Verizon forum and download Stang5.0litre rom. That's an awesome rom. I'd stay away from echoe rom, seems like the devs are hit or miss on support. The dev for the stang rom is awesome and very active. I ran both of then and prefer stange.
Click to expand...
Click to collapse
Woah, woah, what? You can flash a rom based on another carrier? Will it still work? O.O
vexx32 said:
Woah, woah, what? You can flash a rom based on another carrier? Will it still work? O.O
Click to expand...
Click to collapse
Yea it works. I know that one does. You'll get a message that says "unauthorized SIM card: or something like that. Just ignore it and use WiFi to setup the phone. Once you have it setup use package disabler or titanium to freeze "setup wizard" and that'll get rid of that notification. You'll have to manually setup your AT&T APN. After that your golden.
Hi All,
So, I have spent 2 days trying to get my Galaxy s8+ back to normal. However, I seem to only have made it worse. It all happened when I decided to change the /data partition from ext4 to another format and then back again to get the /data partition to mount in TWRP after flashing Pascal Rom. However when I rebooted, nothing worked, no boot up screen, no recovery, no life, but all I could get was download mode. It then must of froze up after another restart and I couldn't get anything for 12 hours or so.
The next step I tried once i got download mode again was to flash stock firmware for the G955F, I can't remember the version of this firmware, but I still had nothing change. So then i flashed the latest firmware from SamFirm's downloading client, which was G955FXXU2CRF7 - Australian Optus Branded Firmware (OPS). I was able to get as far as the "hello start screen" and then my phone restarted, it then tried to upgrade my system again, then started "erasing" and then it rebooted and I still had the same issue, nothing but download mode and still no recovery, it still wouldn't turn on. So I flashed the latest International/Unbranded Australian firmware (XSA) - G955FXXU3CRGH, still the same result. I now can't go back to the OPS version of firmware because I get the Check error with the bootloader (since it's a more recent version), so I can't go backwards. I also can only flash "Official Binaries" now. Oh and to make things worse, I read that Odin Option "Nand Erase" just erased user data, so I thought I might as well try it, and as a result, I now can't flash even the (XSA) firmware because of ODIN failing and I now have an "An Error has Occurred while updating the device software. Use the emergency recovery function in the smart switch PC Software.". I am a bloody idiot :good: . Oh, I have tried multiple versions of Both Samsung Kies & Smart Switch (Which both had the option for "recovery & initialisation"), however, I get a message that my device is unsupported after adding in my device model and S/N. I tried a PIT file and then found out it's now included in all the latest firmware img files.. so yeah lol. Fun times. Soooo I feel like I am out of Options, nothing I do is working. The worst of all this is my wife is not happy haha which means after years of tinkering with android phones (flashing custom ROMS, Kernels, Root Solutions, e.c.t ), this may be the end of the road for me if I can't fix this phone. I really hope this thread isn't true too : https://forum.xda-developers.com/galaxy-s8+/help/sm-g955fd-access-download-mode-t3748228
So Please, someone help me out if it is at all fixable even if it requires opening the phone up lol.
The stats i have on download mode are the following:
RMM State as Prenormal
OEM Lock: OFF
FRP Lock: OFF
CARRIER_ID: OPS (which is super weird because it only accepts XSA to be flashed :S )
Secure download: Enabled
System Status: Custom
Warranty Void: 1
Current Binary: Samsun Official
If you need more, just let me know.
Ok, quick update: I have got rid of the error that I mentioned. I managed to flash XSA firmware again, it went to the blue Andriod is updating the system screen, then started "erasing" then rebooted and nothing again, still only download mode available. Nothing happens when I try to turn it on or try recovery mode.
This firmware you mentioned XSA - G955FXXU3CRGH i would double check. As far as I know Australia doesn't have a version 3 bootloader yet whether unbranded.telstra or Optus.
Quick Update: Maybe Fixed now!
Even though no one has replied yet, as it's only been an hour or so. I just wanted to let anyone else know who is experiencing a similar issue in the future on how to possibly fix it.
This was a real nightmare, however quick disclaimer, I am not responsible for any damage incurred to your device/property by following my instructions.
So the way I have fixed it, is I flashed the AP file only (from the firmware zip i had downloaded from SamFirm) with "Auto Reboot" Off. When ODIN finished, I held the Vol Down + power button, to reset it. It gave me a blue "No Command" Screen, I then waited and it then went black and the recovery screen appeared. I cleared the cache, rebooted to bootloader, which it didn't turn back on, so I left it because I thought it was the same thing. Came back 10 mins later and turned it on (or hard restarted, can't remember) and it worked. It booted!
I did soon learn it looks like it was having a charging problem because it had no charge and kept telling me there was water in the port (even though it was dry), I restarted it again after putting it on a wireless charging pad and it is seeming fine so far with the USB charger. So big note to anyone in the future, that it could be possibly bugging out with charging as well if you can't get it back on. I did have the device tell me here and there the last two days that there was water in the port when it was off. So kinda weird.
I know this all sounds a little hocus pocus, superstitious almost, but hey, my phone is working, so maybe replicating my actions may just help lol. :cyclops:
spawnlives said:
This firmware you mentioned XSA - G955FXXU3CRGH i would double check. As far as I know Australia doesn't have a version 3 bootloader yet whether unbranded.telstra or Optus.
Click to expand...
Click to collapse
Oh right, well, I did hear that SamFirm is not supported anymore, as that's where that firmware came from. Maybe it's dishing out incorrect firmware now? Possible the structure of where ever it is getting its firmware from (pretty sure it's pulled from samsung) has possibly been altered?
Just for reference I use www.updato.com for downloading firmware it is usually up to date. No reference to the firmware you mentioned (not for Australia anyway)
The screenshot I took: Imgur link:
https://imgur.com/a/lqyzWW7
Interesting I'll keep a lookout for it. Still on nougat 7.0 (XSA) no plans to upgrade yet until some issues are fully resolved ( out of beta stage that is ).
spawnlives said:
Interesting I'll keep a lookout for it. Still on nougat 7.0 (XSA) no plans to upgrade yet until some issues are fully resolved ( out of beta stage that is ).
Click to expand...
Click to collapse
Yeah, it's seeming to work now, but my fast charge isn't working. However, my other oreo ROM didn't work with fast charge either. So i am unsure if it is my phone or an orio bug :/ lol
Well at least you got it working and not using as a door stop
that was really sad story man.....
spawnlives said:
Well at least you got it working and not using as a door stop
Click to expand...
Click to collapse
Yeah haha, so glad it's not a door stop haha