Need Default Apps - Huawei P9 Lite Questions & Answers

i update my phone to emui 5.0 but i dont have default app like hicalender and hikeyboard or hitheme. how can i get it back ?

You have to flash the additional package
For that look at that link : http://forum.xda-developers.com/huawei-p9lite/development/nougat-official-firmware-t3512932/page24

simo255 said:
You have to flash the additional package
For that look at that link : http://forum.xda-developers.com/huawei-p9lite/development/nougat-official-firmware-t3512932/page24
Click to expand...
Click to collapse
are that will brick my phone ?

Hansfen said:
are that will brick my phone ?
Click to expand...
Click to collapse
No it wont !

simo255 said:
No it wont !
Click to expand...
Click to collapse
i instal it but stuck in 5% with holding 3 button, should i use twrp ? and what twrp for b336 ?

Hansfen said:
i instal it but stuck in 5% with holding 3 button, should i use twrp ? and what twrp for b336 ?
Click to expand...
Click to collapse
If this method doesnt work, try that one (it will erase your data )
Yes use twrp, and follow carefully the steps which are in the guide (HOW TO MOUNT DATA) and flash the additional package of you phone version (vns-l21 or l31) using twrp
After keep following the steps (doing factory reset using stock recovery etc..)

simo255 said:
If this method doesnt work, try that one (it will erase your data )
Yes use twrp, and follow carefully the steps which are in the guide (HOW TO MOUNT DATA) and flash the additional package of you phone version (vns-l21 or l31) using twrp
After keep following the steps (doing factory reset using stock recovery etc..)
Click to expand...
Click to collapse
i follow the guide but when after instal additional package my phone goes black screen so i reinstal the update.zip but unknown command with updater process ended with ERROR: 7, so what should i do now ?

Related

Android N Root Working(Explained)

There are two methods to root Android N .
Method 1
Flash the Supersu.zip from custom recovery.
RC-SuperSU-v2.69-20160313161431.zip
Method 2
This method will work without custom recovery , just download it and go the fastboot and follow the steps .
CF-Auto-Root-bullhead-bullhead-nexus5x-NPC56P.zip
Just download the file
Extract it
reboot your Nexus 5X into bootloader
Now open the root-windows(If you are using windows otherwise select the file which is for your operating system)
Now the command window will open and ask you to enter any key to continue
Then press any key from your keyboard and it will automatically done the remaining process and your phone will reboot
If you device got bootloop then poweroff the device once and power on manually
Thats it you will see the SuperSu icon .
If you like hit the thanks ......
how do you get access to the files on your phone to flash this. I have twrp flashed but it wont get access to any files that are actually on phone so I can not flash SUPSERSU?
brennerj said:
how do you get access to the files on your phone to flash this. I have twrp flashed but it wont get access to any files that are actually on phone so I can not flash SUPSERSU?
Click to expand...
Click to collapse
Then try the second method , it doesnt need the TWRP recovery.
How I root my HTC One m8
adeeta said:
How I root my HTC One m8
Click to expand...
Click to collapse
Wrong forum..
Sent from my Nexus 6 using XDA Free mobile app
karthik432 said:
There are two methods to root Android N .
Method 1
Flash the Supersu.zip from custom recovery.
RC-SuperSU-v2.69-20160313161431.zip
Method 2
This method will work without custom recovery , just download it and go the fastboot and follow the steps .
CF-Auto-Root-bullhead-bullhead-nexus5x-NPC56P.zip
If you like hit the thanks ......
Click to expand...
Click to collapse
can you explain how to do the second method. Do not have experience flashing that one. Do we use android toolkit or SDK? Please elaborate. Thanks!
brennerj said:
can you explain how to do the second method. Do not have experience flashing that one. Do we use android toolkit or SDK? Please elaborate. Thanks!
Click to expand...
Click to collapse
Just download the file
Extract it
reboot your Nexus 5X into bootloader
Now open the root-windows(If you are using windows otherwise select the file which is for your operating system)
Now the command window will open and ask you to enter any key to continue
Then press any key from your keyboard and it will automatically done the remaining process and your phone will reboot
If you device got bootloop then poweroff the device once and power on manually
Thats it you will see the SuperSu icon .
Thanks autoroot worked. Also format userdata then flash twrp then flash SuperSU works but after a reboot I'm back to stock recovery again. Do we need a modified boot.img?
Edit:: OK I managed to get twrp to stick but I need password to decrypt data. Tried formatting userdata but stock recovery is back after a reboot
how to install custom recovery on nexus 5x android n dev prev 2? i stuck on splash screen (twrp 3.0.0.2)
tomgacz said:
how to install custom recovery on nexus 5x android n dev prev 2? i stuck on splash screen (twrp 3.0.0.2)
Click to expand...
Click to collapse
that because the encrypted user data
i try this method and work for me
1. clean flash the N prev 2
2. boot into bootloader
3. flash twrp
4. flash the modifed boot.img
http://forum.xda-developers.com/nexus-5x/general/4-17-16-t3360574
5. format the userdata
6. boot into the recovery and flash the SuperSU
before format the userdata, don't reboot the device
hope this can help
Well, I sideloaded super su latest after installing N preview. I cannot get txrp to read write system files, though. ANyone get twrp on N yet?
Xdevillived666 said:
Well, I sideloaded super su latest after installing N preview. I cannot get txrp to read write system files, though. ANyone get twrp on N yet?
Click to expand...
Click to collapse
Yes, I did. First, your phone must be decrypted. TWRP cannot be flashed on encrypted Android N.
ttakacs said:
Yes, I did. First, your phone must be decrypted. TWRP cannot be flashed on encrypted Android N.
Click to expand...
Click to collapse
How do I do this? Can I be on N or must I be on MM first?
Xdevillived666 said:
How do I do this? Can I be on N or must I be on MM first?
Click to expand...
Click to collapse
Three steps:
1. Disable forced-encryption & decrypt (fastboot)
Flash the modified boot.img
Format the data partition
See: http://www.droidorigin.com/decrypt-nexus-5x/
2. Reboot and copy SuperSU 2.74 to internal storage
3. Root
Install TWRP using fastboot
Boot into TWRP and flash SuperSU 2.74
See http://www.droidorigin.com/root-android-n-developer-preview/
ttakacs said:
Three steps:
1. Disable forced-encryption & decrypt (fastboot)
Flash the modified boot.img
Format the data partition
See: http://www.droidorigin.com/decrypt-nexus-5x/
2. Reboot and copy SuperSU 2.74 to internal storage
3. Root
Install TWRP using fastboot
Boot into TWRP and flash SuperSU 2.74
See http://www.droidorigin.com/root-andr...loper-preview/
Click to expand...
Click to collapse
Thanks man!! !The second link you sent me to no longer exists, though:-/
Ooops... Error 404
Oh! That's a 404. Please contact the website owner.
http://www.droidorigin.com/root-andr...loper-preview/
Xdevillived666 said:
Thanks man!! !The second link you sent me to no longer exists, though:-/
Ooops... Error 404
Oh! That's a 404. Please contact the website owner.
http://www.droidorigin.com/root-andr...loper-preview/
Click to expand...
Click to collapse
The forum software truncated the URL. Here it is: http://www.droidorigin.com/root-android-n-developer-preview/

Problem in restoring

Hi guys, i was trying to restore my device from a custom rom to the stock version following the restoring and the rebranding guide of the thread on the forum about it. In conclusion:
-everytime i try the dload method (with the nocheck recoveries) the update stops at 5% with "uncompatible version".
-Once i finally installed the B182 version, the camera didn't work and the system was unstable, maybe for some error in the Vendor package.
-I also tried to flash the images of cust userdata system and boot but no results
My idea was to restore the B130 and then to update by emui to b182.
Can anyone solve this big problem?
(SORRY for the english, I'm Italian)
Try the restoring guide by OldDroid
I followed that guide, but nothing. Can anyone give me a Nandroid backup of european stock version?
If you have the update.app file , use Huawei update extractor to get recovery and recovery2 IMG files, flash them using fastboot commands .
Then try to place ROM file in dload , use vol up+ down and power button to flash it.
amulbaby said:
If you have the update.app file , use Huawei update extractor to get recovery and recovery2 IMG files, flash them using fastboot commands .
Then try to place ROM file in dload , use vol up+ down and power button to flash it.
Click to expand...
Click to collapse
So the version of the firmware is not relevant for the dload method ? I mean, it doesn't matter if I've installed the B182 and in dload i put the 130 one?
stestrippoli said:
So the version of the firmware is not relevant for the dload method ? I mean, it doesn't matter if I've installed the B182 and in dload i put the 130 one?
Click to expand...
Click to collapse
It shouldn't . Give it a try. Share results
amulbaby said:
It shouldn't . Give it a try. Share results
Click to expand...
Click to collapse
Ok I will. Just a question: now I've installed Lineage OS, is there some wipe I have to do before the dload method? Or I just have to install the two recoveries?
stestrippoli said:
Ok I will. Just a question: now I've installed Lineage OS, is there some wipe I have to do before the dload method? Or I just have to install the two recoveries?
Click to expand...
Click to collapse
Just install the two recoveries and flash through dload
PalakMi said:
Just install the two recoveries and flash through dload
Click to expand...
Click to collapse
Nothing, it doesn't work. "software install failed!" at 5%
stestrippoli said:
Nothing, it doesn't work. "software install failed!" at 5%
Click to expand...
Click to collapse
I ran out of ideas
Sorry
stestrippoli said:
Nothing, it doesn't work. "software install failed!" at 5%
Click to expand...
Click to collapse
try installing some higher version than B132 then if it is available for your device,
shashank1320 said:
try installing some higher version than B132 then if it is available for your device,
Click to expand...
Click to collapse
I installed the 182 flashing images (dload method didn't worked) from update.app, but there was so many issues (like the camera which wasn't installed or inexistent calling function)
stestrippoli said:
I installed the 182 flashing images (dload method didn't worked) from update.app, but there was so many issues (like the camera which wasn't installed or inexistent calling function)
Click to expand...
Click to collapse
Factory reset does any help?
shashank1320 said:
Factory reset does any help?
Click to expand...
Click to collapse
Already tried, no results. I really don't understand why i tried every single method in this guide, also used by other users, but without any success. Every single time it stops at 5% with dload or it goes in bootloop with flashed images from lower firmwares of 182.
My last idea was finding a Nandroid backup of stock version and the restore it from TWRP. But obviously I couldn't find it.
shashank1320 said:
Factory reset does any help?
Click to expand...
Click to collapse
Does the telephone be unrooted to do the method?
stestrippoli said:
Does the telephone be unrooted to do the method?
Click to expand...
Click to collapse
Nope it won't bring the camera app by rooting. Thinking of other options

Couldn't update Installation problem with august update

So this week i hadn't time enough to install the august update since my phone is rooted so i decided to do it now. What i did before trying to download the update :
1.Deleted all magisk modules that i had then rebooted
2.Unistalled magisk using restore image then rebooted
3.Went to sys update downloaded and it says installation failed
What do to? I'm not rooted now and i don't have twrp installed.
PS. don't want to install it via fastboot/miflash
Follow this guide in future. https://github.com/topjohnwu/Magisk/blob/master/docs/tips.md#ota-installation-tips
To fix your problem now, find a stock boot image for your update version you are currently on and flash it.
emiljano539 said:
PS. don't want to install it via fastboot/miflash
Click to expand...
Click to collapse
If you don't want to use Miflash (Why ?) you can boot temporary TWRP and flash .zip here:
https://forum.xda-developers.com/showpost.php?p=77353883&postcount=542
sipollo said:
If you don't want to use Miflash (Why ?) you can boot temporary TWRP and flash .zip here:
https://forum.xda-developers.com/showpost.php?p=77353883&postcount=542
Click to expand...
Click to collapse
Do i lose my data if i flash this via twrp?
Idk i don't really trust miflash
emiljano539 said:
Do i lose my data if i flash this via twrp?
Idk i don't really trust miflash
Click to expand...
Click to collapse
You won't lose your data.
ludditefornow said:
Follow this guide in future. https://github.com/topjohnwu/Magisk/blob/master/docs/tips.md#ota-installation-tips
To fix your problem now, find a stock boot image for your update version you are currently on and flash it.
Click to expand...
Click to collapse
flashed the stock boot image tried to install it but again it shows that error , i guess the only thing i can do is to flash it manually via fastboot/miflash
sipollo said:
You won't lose your data.
Click to expand...
Click to collapse
Okay thanks, do i have to remove the magisk and flash the stock boot.img or it doesn't matter?
emiljano539 said:
Okay thanks, do i have to remove the magisk and flash the stock boot.img or it doesn't matter?
Click to expand...
Click to collapse
It doesn't matter. You'll have to reinstall Magisk (if you want to).
sipollo said:
It doesn't matter. You'll have to reinstall Magisk (if you want to).
Click to expand...
Click to collapse
which one should i install from them because there are 2 tissot-T files ( for twrp)
"tissot-T-OPM1.171019.026.8.8.23.zip" or "tissot-T-OPM1.171019.026.V9.6.5.0.ODHMIFE.zip" ?
emiljano539 said:
which one should i install from them because there are 2 tissot-T files ( for twrp)
"tissot-T-OPM1.171019.026.8.8.23.zip" or "tissot-T-OPM1.171019.026.V9.6.5.0.ODHMIFE.zip" ?
Click to expand...
Click to collapse
tissot-T-OPM1.171019.026.V9.6.5.0.ODHMIFE.zip
The other file is the latest beta.
sipollo said:
tissot-T-OPM1.171019.026.V9.6.5.0.ODHMIFE.zip
The other file is the latest beta.
Click to expand...
Click to collapse
I installed the zip from twrp and now after reboot i am stucked in bootloop now i can't even boot into twrp. What to do?
After i flashed it in the end says:
Failed to mount /system Invalid argument
Which TWRP did you use?
sipollo said:
Which TWRP did you use?
Click to expand...
Click to collapse
the official one. what version should i use?
its funny now that i flashed the stock rom via mi flash tool and now again the installation shows error..
ludditefornow said:
Follow this guide in future. https://github.com/topjohnwu/Magisk/blob/master/docs/tips.md#ota-installation-tips
To fix your problem now, find a stock boot image for your update version you are currently on and flash it.
Click to expand...
Click to collapse
I'm facing same issue and I was following the guide.
Same here, can't install set Ota, even after remove magisk.
Other thing, cell won't show screen to put pin to boot, previous pin of sim so I think encryption is disable!? Any idea?

Update.zip

hello, i have a P9 lite from 2016 + twrp. how do i install an update 'update.zip'?
toto6976 said:
hello, i have a P9 lite from 2016 + twrp. how do i install an update 'update.zip'?
Click to expand...
Click to collapse
Hello dude,
sorry but you should post more info about your device...
What is your complete firmware ? ( settings > device info... example VNS-L31C432B381 )
Which update would you like to do ? A simple update of your firmware ?
Which TWRP version do you have ?
Twrp Elite 3.2.1-0
The firmware is not original. I installed the C432B414 a while ago but I don't know how ...
The proposed update weighs 2 GB. it's the C432B418-Full.
EMUI 5.0.3. Android 7
I don't know the difference between a simple update or a firmware update. I would only like to install the proposed 'update.zip' file.
toto6976 said:
Twrp Elite 3.2.1-0
The firmware is not original. I installed the C432B414 a while ago but I don't know how ...
The proposed update weighs 2 GB. it's the C432B418-Full.
EMUI 5.0.3. Android 7
I don't know the difference between a simple update or a firmware update. I would only like to install the proposed 'update.zip' file.
Click to expand...
Click to collapse
Mmm, does not original firmware mean ?
You didn't said but i bet your device is L31, isn't it ?
Updates won't install via TWRP and "only" update.zip, you must use HuRUpdater...
Are your firmware 100% working ? If yes, i suggest to use
TWRP 3.1.1-1 by HassanMirza01 then to follow the procedure
in the HuRUpdater appropriate thread.
That's it. If you need some further info just tell.
Cheers
Yes, it's L31.
Hello,
I think I already have the TWRP version of HassanMirza installed. I will check this morning.
The firmware is not original indeed. This is an update that I had installed. In the meantime, I have lost the bootloader unlock code. Do you know if there is a way to retrieve it from the mobile since it is currently unlocked?
Hello,
How do I replace my current TWRP with that of HassanMirza? I put it on SD card and I flash it?
If it doesn't work, what will happen?
Brick?
I'm going to do a 'nandroid backup'. Via adb, is it possible? with the command 'adb backup --twrp'?
toto6976 said:
Yes, it's L31.
Hello,
I think I already have the TWRP version of HassanMirza installed. I will check this morning.
The firmware is not original indeed. This is an update that I had installed. In the meantime, I have lost the bootloader unlock code. Do you know if there is a way to retrieve it from the mobile since it is currently unlocked?
Click to expand...
Click to collapse
toto6976 said:
Hello,
How do I replace my current TWRP with that of HassanMirza? I put it on SD card and I flash it?
If it doesn't work, what will happen?
Brick?
Click to expand...
Click to collapse
toto6976 said:
I'm going to do a 'nandroid backup'. Via adb, is it possible? with the command 'adb backup --twrp'?
Click to expand...
Click to collapse
Heyho
3.2.1-0 TWRP have some issues and it's not guaranteed it will 100% work,
that's because i suggested you to install 3.1.1-1 version...
I don't know how to retrieve the code, maybe you'll need to pay 4€
and use DC unlocker to read it again...
If you will use HuRUpdater and ( suggested ) keep the TWRP,
your bootloader will not be re-locked.
Your current TWRP can be replaced flashing it into the recovery.
How to do it ? Place the TWRP into your SD card, reboot recovery,
tap install, then in the bottom right tap install image, select your 3.1.1-1 TWRP.
Next tap on recovery partition and swipe to flash.
When finished reboot recovery to verify if it's really changed.
There is no reason why it shouldn't work.
I don't know about adb, you can try... but i think you can do a
nandroid backup rebooting into recovery and
selecting every partition you see...
Beware using 3.2.1-0 TWRP, as i told you it could cause unexpected issues.. :cyclops:
P.S.: a good rule before making a nandroid backup or attempting an
update/downgrade/switch ROM are
to remove all the security of the device..
fingerprint and / or password and / or pattern.
Dadditz said:
Your current TWRP can be replaced flashing it into the recovery.
How to do it ? Place the TWRP into your SD card, reboot recovery,
tap install, then in the bottom right tap install image, select your 3.1.1-1 TWRP.
Next tap on recovery partition and swipe to flash.
When finished reboot recovery to verify if it's really changed.
There is no reason why it shouldn't work.
Click to expand...
Click to collapse
Good evening,
I went to see for the TWRP of HassanMirza. This is version 3.2.1. Why are you telling me to take 3.1.1.1 ??
I finally found version 3.1.1.1 on the xda page of HassanMirza. I install it tomorrow. We will see if it goes well because in fair I downgrade from 3.2.1 to 3.1.1 !?
I found the link I followed to install the LC432B414 version:
https://www.stechguide.com/huawei-p9-lite-b413-b414-nougat-update/
I keep it under the elbow if it goes wrong ...
I forgot to say that, if it is possible, I would like to keep the root and the OTA updates ... Is (this possible ??
toto6976 said:
Good evening,
I went to see for the TWRP of HassanMirza. This is version 3.2.1. Why are you telling me to take 3.1.1.1 ??
I finally found version 3.1.1.1 on the xda page of HassanMirza. I install it tomorrow. We will see if it goes well because in fair I downgrade from 3.2.1 to 3.1.1 !?
I found the link I followed to install the LC432B414 version:
https://www.stechguide.com/huawei-p9-lite-b413-b414-nougat-update/
I keep it under the elbow if it goes wrong ...
I forgot to say that, if it is possible, I would like to keep the root and the OTA updates ... Is (this possible ??
Click to expand...
Click to collapse
Hi,
sorry, you installed B414 firmware in your phone using that guide ?
If yes, which recovery did you used ?
Are your current ( B414 ) firmware 100% working ?
As i know firmwares cannot be flashed that way, that's because some
DEVs started create scripts capable to do that and because
i suggested you to use HuRUpdater method..
Anyway the device are in your hands and you can do anything you want...
Ahmmm, for your latest question, as i know, flashing a firmware will erase
the root ( not necessarily the recovery ), but you can easily reflash it...
Cheers
sorry, you installed B414 firmware in your phone using that guide ?
Click to expand...
Click to collapse
Yes. This is the reason why I needed the bootloader code because I believe it had deleted TWRP after the flash.
If yes, which recovery did you used ?
Click to expand...
Click to collapse
TWRP Elite 3.2.1, The one that is currently installed I believe.
Are your current ( B414 ) firmware 100% working ?
Click to expand...
Click to collapse
I don't know what it means and what I can measure it with?
i suggested you to use HuRUpdater method..
Click to expand...
Click to collapse
This is what I intend to do by putting in it the twrp of Hassan after having flashed it on my mobile
as i know, flashing a firmware will erase
the root ( not necessarily the recovery ), but you can easily reflash it...
Click to expand...
Click to collapse
Precisely, currently installed root is 'super su'. But I had to remove it because too many problems with some application. I was wondering if 'Magisk' works on this mobile? And if so which version?
I would like to recover my bootloader code before doing any manipulations in case it goes wrong. My mobile is unlocked but no longer root. I tried this command but it doesn't work:
adb devices
adb shell
su -c "grep -m1 -aoE 'WVLOCK. {14} [0-9] {16}' / dev / block / mmcblk0p7 | grep -aoE '[0-9] {16}'"
How can I recover this code which is on my mobile since it is unlocked?
toto6976 said:
Yes. This is the reason why I needed the bootloader code because I believe it had deleted TWRP after the flash.
Click to expand...
Click to collapse
That's strange (at least for me)
toto6976 said:
Elite 3.2.1, The one that is currently installed I believe.
Click to expand...
Click to collapse
Yep, really strange (at least for me)
toto6976 said:
I don't know what it means and what I can measure it with?
Click to expand...
Click to collapse
I meant if " everything " is working into the device...
toto6976 said:
This is what I intend to do by putting in it the twrp of Hassan after having flashed it on my mobile
Click to expand...
Click to collapse
Ok, i never used the method you wrote into the guide you posted above...
toto6976 said:
Precisely, currently installed root is 'super su'. But I had to remove it because too many problems with some application. I was wondering if 'Magisk' works on this mobile? And if so which version?
Click to expand...
Click to collapse
You have to check, i don't have that device anymore...
toto6976 said:
I would like to recover my bootloader code before doing any manipulations in case it goes wrong. My mobile is unlocked but no longer root. I tried this command but it doesn't work:
adb devices
adb shell
su -c "grep -m1 -aoE 'WVLOCK. {14} [0-9] {16}' / dev / block / mmcblk0p7 | grep -aoE '[0-9] {16}'"
How can I recover this code which is on my mobile since it is unlocked?
Click to expand...
Click to collapse
Sorry, i don't know how and i don't know if it's possible...
Hello, update successfully
Nos, i would like to know how to install magisk and, if IR is possible, wich version to take ?
Thank you
toto6976 said:
Hello, update successfully
Nos, i would like to know how to install magisk and, if IR is possible, wich version to take ?
Thank you
Click to expand...
Click to collapse
Hi, that's a good news for you...
For magisk you should go in his main thread, then hit on the
Magisk's GitHub Page link.
I don't know which version, you have to try by yourself.
Download the installer (multiple versions, ex. 20.4 & 20.3 & 19.4), the uninstaller and the apk.
Flash the uninstaller into the twrp if something goes wrong.
Follow the installation guides...
Good luck.

Looking for EMUI 5 (VNS-L21)

Hello, i’m looking for the update file for my phone. I’m currently on EMUI 4.1, to which i foolishly downgraded to last weekend. I would like to update with the SD Card and dload folder method, but i can’t find the stock EMUI 5 rom anywhere.
Marko787 said:
Hello, i’m looking for the update file for my phone. I’m currently on EMUI 4.1, to which i foolishly downgraded to last weekend. I would like to update with the SD Card and dload folder method, but i can’t find the stock EMUI 5 rom anywhere.
Click to expand...
Click to collapse
hi try this, maybe it will work for you
P9 lite VNS-L31 flash file, try it maybe it will work for you
ebholoria said:
P9 lite VNS-L31 flash file, try it maybe it will work for you
Click to expand...
Click to collapse
Installing vns-l31 firmware on vns-l21 will cause soft brick, with model "generic a-15".
Marko787 said:
i’m looking for the update file
Click to expand...
Click to collapse
What is your build number? (full).
Hi try to check her, you will find yours but note that I'm not trying to brick your phone.
5261979
forum.xda-developers.com
click on find all thread and try than scroll to it, you will find yours, https://forum.xda-developers.com/m/5261979.8631980/
-Alf- said:
What is your build number? (full).
Click to expand...
Click to collapse
my build number is VNS-L21C432B160
Marko787 said:
my build number is VNS-L21C432B160
Click to expand...
Click to collapse
Okay, download B370 (two files) and follow instructions , use method 3 for locked bootloader (or method 1 for unlocked BL & TWRP)
Here you go
-Alf- said:
Okay, download B370 (two files) and follow instructions , use method 3 for locked bootloader (or method 1 for unlocked BL & TWRP)
Here you go
Click to expand...
Click to collapse
Thanks, i tried method 3 first but it failed (i have an unlocked bootloader though), so then i tried method 1 (i had twrp from meticulus already installed) first went to install only the update.zip in twrp, it failed, but when i rebooted, the phone is now updated to emui 5. Also my build number is now the test keys nonsense, but that happened to me before and i know how to fix that.
Thanks, your guide worked.
Marko787 said:
test keys
Click to expand...
Click to collapse
I'm in the exact same soup, please help...
Rumburak1 said:
I'm in the exact same soup, please help...
Click to expand...
Click to collapse
I installed an update.zip from a video about downgrading to Emui 4.1 with the hold down all buttons method, and the test keys thing disappeared, but it wiped my whole phone and installled a version of Emui from a different country I think because everything was just different.
Rumburak1 said:
I'm in the exact same soup, please help...
Click to expand...
Click to collapse
Install TWRP for Nougat, e.g. this one:
3.1.0.2
Install it over eRecovery with command
fastboot flash recovery2 xxxxxxx.img
Copy to the SD card the second file - hw_eu.zip from B370.
Boot into TWRP, click WIPE, then FORMAT DATA , after REBOOT SYSTEM.
The smartphone will start rebooting: as soon as the technical menu appears on the screen (yellow warning) press and hold Volume Up up to 3 sec, and here you are in TWRP again.
Click INSTALL and flash update_data_full_VNS-L21_hw_eu.zip.
Reboot into stock Recovery and do factory reset.
-Alf- said:
Install TWRP for Nougat, e.g. this one:
3.1.0.2
Install it over eRecovery with command
fastboot flash recovery2 xxxxxxx.img
Copy to the SD card the second file - hw_eu.zip from B370.
Boot into TWRP, click WIPE, then FORMAT DATA , after REBOOT SYSTEM.
The smartphone will start rebooting: as soon as the technical menu appears on the screen (yellow warning) press and hold Volume Up up to 3 sec, and here you are in TWRP again.
Click INSTALL and flash update_data_full_VNS-L21_hw_eu.zip.
Reboot into stock Recovery and do factory reset.
Click to expand...
Click to collapse
Does that mean I'm missing the second (smaller) file? Okay, I'll try it. Thank you!
Rumburak1 said:
Does that mean I'm missing the second (smaller) file? Okay, I'll try it. Thank you!
Click to expand...
Click to collapse
Yes, yes, yes! Thanks a lot, -Alf- !

Categories

Resources