Database Users

Help!

How could I flash recovery without pc? I have twrp at the moment and i want the CWM. Im on 6.0 Emui 4.1

staska_lt said:
How could I flash recovery without pc? I have twrp at the moment and i want the CWM. Im on 6.0 Emui 4.1
Click to expand...
Click to collapse
Try with the Flashify app.

GaT7 said:
Try with the Flashify app.
Click to expand...
Click to collapse
I tried and i got black screen

Flash it via TWRP then? TWRP supports flashing .img too if you need to. :|

3. Post using a clear and descriptive subject and message.
You're most likely to receive a helpful answer to your question, if you use a short subject title that describes your problem and a message that explains in detail, what your problem is and what you've done to try solving it.
Click to expand...
Click to collapse
Source (Forum rules): http://forum.xda-developers.com/announcement.php?a=81
Just sayin bro...
And btw some things just dont work well without a PC. Even though it might be possible to work around it you might just wanna do this on a computer with these commands in adb:
Code:
adb reboot bootloader
and
Code:
fastboot flash recovery recovery.img
and then reboot

PCSE said:
Source (Forum rules): http://forum.xda-developers.com/announcement.php?a=81
Just sayin bro...
And btw some things just dont work well without a PC. Even though it might be possible to work around it you might just wanna do this on a computer with these commands in adb:
and
and then reboot
Click to expand...
Click to collapse
I tried to flash via twrp. It said that the install was succesful, but when i tried to go to recovery i got black screen

Why would you want cwm? TWRP is way better. Oh and your recovery is gone. You can be lucky that you didn't brick your phone. Next time, use TWRP instead and ONLY if you have the ability to restore everything with a PC. ONLY make such hard modifications to your phone if you have a PC nearby

Confirm that you're fully rooted using something like Root Checker

GaT7 said:
Confirm that you're fully rooted using something like Root Checker
Click to expand...
Click to collapse
Im sure im fully rooted

Ok, I suspect something may be wrong with your root or TWRP or ROM, which may be the reason for the odd problems.
So do check & confirm root anyway, & also tell us the versions of your TWRP & ROM (latter in Settings > About phone > Build number).

GaT7 said:
Ok, I suspect something may be wrong with your root or TWRP or ROM, which may be the reason for the odd problems.
So do check & confirm root anyway, & also tell us the versions of your TWRP & ROM (latter in Settings > About phone > Build number).
Click to expand...
Click to collapse
Im on sakoban's rom. B564

How to restore IMEI number on a official rom?

okay now I am starting to get lost and the guide for ''fixing your IMEI number'' caused my phone to soft-brick once again so it didn't really help
and yes I used the most recent SuperSU (stable) version V2.78 (I hope that is a correct version)
http://forum.xda-developers.com/oneplus-one/general/steps-how-to-recover-bad-imei-t3171452
my baseband gives a I think correct version but my IMEI number still is ''0''
Please!, can anyone tell me how to restore my IMEI number?

Also my phone uses tries to use LTE connection like I have U.S. drivers (I don't know if it makes a difference since I am pretty much noob)
I find that just wierd.. sorry to bother you guys with all this, I just want my phone to be fixed

dempixels said:
Also my phone uses tries to use LTE connection like I have U.S. drivers (I don't know if it makes a difference since I am pretty much noob)
I find that just wierd.. sorry to bother you guys with all this, I just want my phone to be fixed
Click to expand...
Click to collapse
Did you try to make a complete reset of the phone?

Dio-Genes said:
Did you try to make a complete reset of the phone?
Click to expand...
Click to collapse
And how am I gonna do that?
the only thing I know and have done is: flashing a official rom on the device that's it

dempixels said:
And how am I gonna do that?
the only thing I know and have done is: flashing a official rom on the device that's it
Click to expand...
Click to collapse
Download the zip from the oneplus link... extract it and read the "REEEEEADME.TXT" last paragraph how to type Imei in "RF_NV_manager.exe"...PM me if you need more help.

dempixels said:
And how am I gonna do that?
the only thing I know and have done is: flashing a official rom on the device that's it
Click to expand...
Click to collapse
EXACTLY!!! follow these instructions step by step. Take a look how many sparsechunk files are in the image that you download and proceed as advised. Take care to choose the right image for your device, also about country and so.
http://forum.xda-developers.com/moto-x-play/general/guide-how-to-flash-factory-image-return-t3261486

Dio-Genes said:
EXACTLY!!! follow these instructions step by step. Take a look how many sparsechunk files are in the image that you download and proceed as advised. Take care to choose the right image for your device, also about country and so.
http://forum.xda-developers.com/moto-x-play/general/guide-how-to-flash-factory-image-return-t3261486
Click to expand...
Click to collapse
I've downloaded the EU image just how it was supposed to go, and installed it in correct order. even though it keeps saying ''Pre-flash validation failed''

bablu048 said:
Download the zip from the oneplus link... extract it and read the "REEEEEADME.TXT" last paragraph how to type Imei in "RF_NV_manager.exe"...PM me if you need more help.
Click to expand...
Click to collapse
well that's just it, it requires root but it's always when I install superSU that my phone soft-bricks. it's the third time that happened.

dempixels said:
well that's just it, it requires root but it's always when I install superSU that my phone soft-bricks. it's the third time that happened.
Click to expand...
Click to collapse
Here use this su2.62-3 it will work. http://forum.xda-developers.com/showpost.php?p=64452858&postcount=1
And remember NOT TO RESTORE THE QCN OF ONEPLUS edit your imei using RFNVmanager only.
---------- Post added at 02:41 PM ---------- Previous post was at 02:35 PM ----------
dempixels said:
I've downloaded the EU image just how it was supposed to go, and installed it in correct order. even though it keeps saying ''Pre-flash validation failed''
Click to expand...
Click to collapse
Have you downgraded earlier??

dempixels said:
I've downloaded the EU image just how it was supposed to go, and installed it in correct order. even though it keeps saying ''Pre-flash validation failed''
Click to expand...
Click to collapse
As far as I remember that happened to me when I tried to relock the bootloader at that moment. Did it work anyway? I mean, did it reboot? Which image did you choose? 5.1 or 6.x? Probably start with 5.1 as this was the original image for the device and later let it update via OTA. Be sure still to grab the appropriate image.

Dio-Genes said:
As far as I remember that happened to me when I tried to relock the bootloader at that moment. Did it work anyway? I mean, did it reboot? Which image did you choose? 5.1 or 6.x? Probably start with 5.1 as this was the original image for the device and later let it update via OTA. Be sure still to grab the appropriate image.
Click to expand...
Click to collapse
According to the Motorola official developer forums I am not ALLOWED to install a android 5.X image when I last ran a 6.X android system. as the result could be that I could Hard brick my device
also some further info:
I think in the past when I tried to install the official stock rom. I accidentally removed/erased the EFS file. or some file that holds my IMEI information.
and now I practically have to re-write it (since.. well you can't just create a IMEI ID or Can I?). but it seems impossible if I look at it.
but I do have the original box with the original IMEI number.

bablu048 said:
Here use this su2.62-3 it will work. http://forum.xda-developers.com/showpost.php?p=64452858&postcount=1
And remember NOT TO RESTORE THE QCN OF ONEPLUS edit your imei using RFNVmanager only.
---------- Post added at 02:41 PM ---------- Previous post was at 02:35 PM ----------
Have you downgraded earlier??
Click to expand...
Click to collapse
no I didn't downgrade earlier. (well i flashed a different logo.bin) but no I didn't downgrade.
so that means the superSU 2.78 does not work on android 6.X?

dempixels said:
According to the Motorola official developer forums I am not ALLOWED to install a android 5.X image when I last ran a 6.X android system. as the result could be that I could Hard brick my device
.
Click to expand...
Click to collapse
Sorry, that's beyond my knowledge.

dempixels said:
no I didn't downgrade earlier. (well i flashed a different logo.bin) but no I didn't downgrade.
so that means the superSU 2.78 does not work on android 6.X?
Click to expand...
Click to collapse
Idk about su2.78... I have always used su2.62-3 ..it worked on lollipop and it works on MM.
What is the need of updating SU app, all it does is give 'root' permissions.

bablu048 said:
Idk about su2.78... I have always used su2.62-3 ..it worked on lollipop and it works on MM.
What is the need of updating SU app, all it does is give 'root' permissions.
Click to expand...
Click to collapse
okay, because you have more experience rooting I am gonna ask you just to be sure.
correct me if i'm wrong:
first I have to flash twrp thingy
next I have to reboot android and copy SuperSU into my storage
then I have to reboot in fastboot and boot into twrp
in twrp I have to flash/install SuperSU into the system.
and.. that's it. so superSU practically roots my device?
oh and from what i've heard/seen I will not be able to update anymore? because when I installed/flash superSU I saw in the log:
''disabling OTA update survival'' or something like that

dempixels said:
okay, because you have more experience rooting I am gonna ask you just to be sure.
correct me if i'm wrong:
first I have to flash twrp thingy
next I have to reboot android and copy SuperSU into my storage
then I have to reboot in fastboot and boot into twrp
in twrp I have to flash/install SuperSU into the system.
and.. that's it. so superSU practically roots my device?
oh and from what i've heard/seen I will not be able to update anymore? because when I installed/flash superSU I saw in the log:
''disabling OTA update survival'' or something like that
Click to expand...
Click to collapse
Yes correct, After flashing twrp take a backup(to be on the safe side) then install su.

bablu048 said:
Yes correct, After flashing twrp take a backup(to be on the safe side) then install su.
Click to expand...
Click to collapse
alright 2 final questions before I am gonna start the whole flashing again
1. does this superSU version work with 6.0.1? (just to be sure)
2.what does it backup to be precise? only the system or everything (probably everything)

bablu048 said:
Yes correct, After flashing twrp take a backup(to be on the safe side) then install su.
Click to expand...
Click to collapse
YES!! it's rooted thanks for the guide but now... ermm.. how do I change my IMEI number?

bablu048 said:
Yes correct, After flashing twrp take a backup(to be on the safe side) then install su.
Click to expand...
Click to collapse
and.... nevermind.. it did not root!... what?
I don't understand I followed the steps on how to install superSU with systemless.. something and it all worked. but it did not root! how is that possible?
do I have to try it again?

dempixels said:
and.... nevermind.. it did not root!... what?
I don't understand I followed the steps on how to install superSU with systemless.. something and it all worked. but it did not root! how is that possible?
do I have to try it again?
Click to expand...
Click to collapse
you dont have su app even after flashing su2.62-3??

Firmware update for VNS-L23C6O5B102

Hi, I've seen a lot of updates for other builds but none for VNS-L23C6O5B102... Any help wud be appreciated.
Thanks.

strykrmas said:
Hi, I've seen a lot of updates for other builds but none for VNS-L23C6O5B102... Any help wud be appreciated.
Thanks.
Click to expand...
Click to collapse
Hi, check this Post: here
Greetings

Thanks bro....

cronociclope said:
Hi, check this Post: here
Greetings
Click to expand...
Click to collapse
Ok... So I followed what was on the link to a T but on completion my phone requested a password and reset. I lost root, and twrp. And twrp isn't flashing. Help plz...

strykrmas said:
Ok... So I followed what was on the link to a T but on completion my phone requested a password and reset. I lost root, and twrp. And twrp isn't flashing. Help plz...
Click to expand...
Click to collapse
Unlock the bootloader again.

cronociclope said:
Unlock the bootloader again.
Click to expand...
Click to collapse
It appears to be still unlocked... According to fastboot

strykrmas said:
It appears to be still unlocked... According to fastboot
Click to expand...
Click to collapse
When the mobile phone turns on the orange letters?

cronociclope said:
When the mobile phone turns on the orange letters?
Click to expand...
Click to collapse
Yea... Its still there

strykrmas said:
Yea... Its still there
Click to expand...
Click to collapse
Unlock the bootloader even if it says it's unlocked.

Ok so now I unlocked the bootloader and viola twrp is back but I can't get my phone to start... Its asking for a password and says that the data is corrupt. So then I tried wiping it tru twrp and that has failed. "Unable to mount data". Help

strykrmas said:
Ok so now I unlocked the bootloader and viola twrp is back but I can't get my phone to start... Its asking for a password and says that the data is corrupt. So then I tried wiping it tru twrp and that has failed. "Unable to mount data". Help
Click to expand...
Click to collapse
In TWRP > Mount > untick and re-tick /data and then try formatting it.

Yip tried tht too... So the phone started back but it's reverted back to its original state... Locked bootloader, unrooted etc...

I can provide full service firmware VNS-L23C605B370 / VNS-L23C605B364 / VNS-L23C605B121

Ok... But can I use any of those tht you've outlined safely, becuz my phone works fine so far but it appears the data partition is damaged. Also the twrp recovery im using is 3.0.1 so I gonna try updating it.

Right... so I've managed to get my phone back up and running by flashing the recovery2, recovery, cust and system files with L23C605B120 instead of B102 as it was. i've also managed to install twrp and rooted it. I've noticed that not any version of twrp works. Only the 3.0.0 version. Now i need help with updating my firmware from B120 to B362 if possible. through the official updater i attempted to install an official update but it kept failing... any suggestions... anyone?

install vns-l23c605b362 ou b374 with twrp
strykrmas said:
Right... so I've managed to get my phone back up and running by flashing the recovery2, recovery, cust and system files with L23C605B120 instead of B102 as it was. i've also managed to install twrp and rooted it. I've noticed that not any version of twrp works. Only the 3.0.0 version. Now i need help with updating my firmware from B120 to B362 if possible. through the official updater i attempted to install an official update but it kept failing... any suggestions... anyone?
Click to expand...
Click to collapse
Hello
as I see you can use twrp 3.0.
then, from then b120 MM.
1 bootloader code.
2 installs twrp.
3 go to wipe. check all except SD card.
4 go to install, install update.zip b362 and install update datafull.zip b362.
5 restarts.
here is.
2017.02.25 VNS-L23C605B362 update.zip http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1258/g104/v77299/f1/full/update.zip
update datafull http://update.hicloud.com:8180/TDS/...-L23_hw_la/update_data_full_VNS-L23_hw_la.zip
now, for vns-l23c605, there is a firmware b374.
you can install it too.
to do it.
you had to download all the files (full-ota-mf-pv b362+full-ota-mf b374) to your computer and handle them with winzip.
look at this post ( the video and the photo). https://forum.xda-developers.com/huawei-p9lite/how-to/update-p9-lite-nougat-ota-s-officials-t3661906
firmware
2017.10.19 VNS-L23C605B374 http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1903/g1755/v100268/f1/full/update.zip
file public http://update.hicloud.com:8180/TDS/...68/f1/full/public/update_data_full_public.zip
file update full http://update.hicloud.com:8180/TDS/...l/VNS-L23_hw_la/update_full_VNS-L23_hw_la.zip
Source firmware http://pro-teammt.ru/firmware-database/?firmware_model=vns-l23c605&firmware_page=0
took your time reading everything before doing things.

Huawei P9 lite Chinese version
Hello, I bought a Huawei P9 Lite Chinese version, I wonder if it is possible to install the international rom.

labutes said:
Hello, I bought a Huawei P9 Lite Chinese version, I wonder if it is possible to install the international rom.
Click to expand...
Click to collapse
which phone version do you have?
** more detail please?
g9 - ?? c ??? b ???
Do you have the bootloader code?
if no one is not going to help you.

Chisetdel31260 said:
which phone version do you have?
** more detail please?
g9 - ?? c ??? b ???
Do you have the bootloader code?
if no one is not going to help you.
Click to expand...
Click to collapse
Modelo: huawei VNS-AL00
Versão: VNS-AL00C00B230
CPU qualcoom sanapdragon
3 Gb Ram
yes i have the bootloader code

Couldn't update Installation problem with august update

So this week i hadn't time enough to install the august update since my phone is rooted so i decided to do it now. What i did before trying to download the update :
1.Deleted all magisk modules that i had then rebooted
2.Unistalled magisk using restore image then rebooted
3.Went to sys update downloaded and it says installation failed
What do to? I'm not rooted now and i don't have twrp installed.
PS. don't want to install it via fastboot/miflash

Follow this guide in future. https://github.com/topjohnwu/Magisk/blob/master/docs/tips.md#ota-installation-tips
To fix your problem now, find a stock boot image for your update version you are currently on and flash it.

emiljano539 said:
PS. don't want to install it via fastboot/miflash
Click to expand...
Click to collapse
If you don't want to use Miflash (Why ?) you can boot temporary TWRP and flash .zip here:
https://forum.xda-developers.com/showpost.php?p=77353883&postcount=542

sipollo said:
If you don't want to use Miflash (Why ?) you can boot temporary TWRP and flash .zip here:
https://forum.xda-developers.com/showpost.php?p=77353883&postcount=542
Click to expand...
Click to collapse
Do i lose my data if i flash this via twrp?
Idk i don't really trust miflash

emiljano539 said:
Do i lose my data if i flash this via twrp?
Idk i don't really trust miflash
Click to expand...
Click to collapse
You won't lose your data.

ludditefornow said:
Follow this guide in future. https://github.com/topjohnwu/Magisk/blob/master/docs/tips.md#ota-installation-tips
To fix your problem now, find a stock boot image for your update version you are currently on and flash it.
Click to expand...
Click to collapse
flashed the stock boot image tried to install it but again it shows that error , i guess the only thing i can do is to flash it manually via fastboot/miflash

sipollo said:
You won't lose your data.
Click to expand...
Click to collapse
Okay thanks, do i have to remove the magisk and flash the stock boot.img or it doesn't matter?

emiljano539 said:
Okay thanks, do i have to remove the magisk and flash the stock boot.img or it doesn't matter?
Click to expand...
Click to collapse
It doesn't matter. You'll have to reinstall Magisk (if you want to).

sipollo said:
It doesn't matter. You'll have to reinstall Magisk (if you want to).
Click to expand...
Click to collapse
which one should i install from them because there are 2 tissot-T files ( for twrp)
"tissot-T-OPM1.171019.026.8.8.23.zip" or "tissot-T-OPM1.171019.026.V9.6.5.0.ODHMIFE.zip" ?

emiljano539 said:
which one should i install from them because there are 2 tissot-T files ( for twrp)
"tissot-T-OPM1.171019.026.8.8.23.zip" or "tissot-T-OPM1.171019.026.V9.6.5.0.ODHMIFE.zip" ?
Click to expand...
Click to collapse
tissot-T-OPM1.171019.026.V9.6.5.0.ODHMIFE.zip
The other file is the latest beta.

sipollo said:
tissot-T-OPM1.171019.026.V9.6.5.0.ODHMIFE.zip
The other file is the latest beta.
Click to expand...
Click to collapse
I installed the zip from twrp and now after reboot i am stucked in bootloop now i can't even boot into twrp. What to do?
After i flashed it in the end says:
Failed to mount /system Invalid argument

Which TWRP did you use?

sipollo said:
Which TWRP did you use?
Click to expand...
Click to collapse
the official one. what version should i use?
its funny now that i flashed the stock rom via mi flash tool and now again the installation shows error..

ludditefornow said:
Follow this guide in future. https://github.com/topjohnwu/Magisk/blob/master/docs/tips.md#ota-installation-tips
To fix your problem now, find a stock boot image for your update version you are currently on and flash it.
Click to expand...
Click to collapse
I'm facing same issue and I was following the guide.

Same here, can't install set Ota, even after remove magisk.
Other thing, cell won't show screen to put pin to boot, previous pin of sim so I think encryption is disable!? Any idea?

How to Root A2017G oreo?

Hi
How can i Root the A2017G oreo a2017gv1.3.0b02 ?
when i install TWRP the phone will formatted?
i have unlock the bootloader.

Just install Magisk 16.7 (even though I hate suggesting to use that software). Do not try to use 17.x or higher until you have followed the steps in this topic:
https://forum.xda-developers.com/axon-7/development/kernel-magisk-17-stock-roms-t3856809
Unfortunately, the 2 other major root solutions out there, SuperSU and Phh's Superuser, don't appear to work with stock Oreo on the Axon 7. I tried both and got bootloops.
Edit: Sorry about that link, it seems to require B20 Oreo, which is for the A2017U. But you have B02 Oreo for the A2017G. The solution in that thread may or may not work for you, I would post there first to ask. Or just try it and see.

m-powergr said:
Hi
How can i Root the A2017G oreo a2017gv1.3.0b02 ?
when i install TWRP the phone will formatted?
i have unlock the bootloader.
Click to expand...
Click to collapse
hey how did you unlock the bootloader?

kay07- said:
hey how did you unlock the bootloader?
Click to expand...
Click to collapse
You just need to flash TWRP, and install Magisk from TRWRP aswell.

TerrorToetje said:
You just need to flash TWRP, and install Magisk from TRWRP aswell.
Click to expand...
Click to collapse
How to do that? Can you explain step by step process. I'm on stock oreo 2017g

Any update on this topic?

TerrorToetje said:
You just need to flash TWRP, and install Magisk from TRWRP aswell.
Click to expand...
Click to collapse
kay07- said:
How to do that? Can you explain step by step process. I'm on stock oreo 2017g
Click to expand...
Click to collapse
that is not too right... If you have a G, you need to roll back to Marshmallow (B10 or B11) and install a SIGNED TWRP (of which there's only one, Tenfar's). [DO NOT BACKUP ANYTHING IN THIS TWRP]
Then from there install the aboot and fbop files present in Controllerboy's unlock guide to get fastboot (via adb commands). then enter fastboot and issue the unlock command
After that, install any other TWRP, the official one from twrp.me might be better for stock ROMs

Based on previous conversation, Tenfar's TWRP is recommended. Can somebody provide me with the TWRP? Cannot find it anywhere due to dead link.

abdinsyakirin said:
Based on previous conversation, Tenfar's TWRP is recommended. Can somebody provide me with the TWRP? Cannot find it anywhere due to dead link.
Click to expand...
Click to collapse
Raystef's G download center, i think it's called 3.0.2-2-SIGNED or something