My TWRP is 3.0.3 and whenever I flash the latest PureNexus Rom, only thing that appears on my screen is Android is starting after I complete the setup.
SHINee2 said:
My TWRP is 3.0.3 and whenever I flash the latest PureNexus Rom, only thing that appears on my screen is Android is starting after I complete the setup.
Click to expand...
Click to collapse
Even i had faced this issue on 6.0.1 build, Dont remember exactly how i got it resolved .
But you may try this
flash vendor image
wipe
flash rom
wipe
reboot
just try it out :good:
ramrock007 said:
Even i had faced this issue on 6.0.1 build, Dont remember exactly how i got it resolved .
But you may try this
flash vendor image
wipe
flash rom
wipe
reboot
just try it out :good:
Click to expand...
Click to collapse
Thank you I will try it out.
SHINee2 said:
My TWRP is 3.0.3 and whenever I flash the latest PureNexus Rom, only thing that appears on my screen is Android is starting after I complete the setup.
Click to expand...
Click to collapse
Did you flash a GApps package? I believe Pure Nexus recommends Dynamic GApps... Check the PN thread for the download link.
Wipe
Flash ROM
Flash GApps
Flash vendor (although you shouldn't need to do this again)
Reboot system
SHINee2 said:
My TWRP is 3.0.3 and whenever I flash the latest PureNexus Rom, only thing that appears on my screen is Android is starting after I complete the setup.
Click to expand...
Click to collapse
You should search the Pure nexus thread. This is a known issue with the latest build and there are workarounds for it.
Related
Just flashed OmniRom beta 2 build together with gapps linked in the OmniRom thread and I get fc on first boot on both NFC service and one more android service something something - can't get passed the pop ups and a reboot into recovery is all I can do.
Wiped system using TWRP 2.6.3.2 and cleared cache after install - did another wipe after reboot just to be sure. I have seen this on other roms that I try to flash?
am I doing something wrong during the flash process?
Wipe (default twrp)
install rom and gapps
clear cache/dalvik
reboot
Tried different gapps with no success..
I tried to flash the first OmniRom (build 1) with the same problems and I also got CM start tutorial when I had flashed OmniRom?? So it feels like the wipe is not working as it should?
TheErk said:
Just flashed OmniRom beta 2 build together with gapps linked in the OmniRom thread and I get fc on first boot on both NFC service and one more android service something something - can't get passed the pop ups and a reboot into recovery is all I can do.
Wiped system using TWRP 2.6.3.2 and cleared cache after install - did another wipe after reboot just to be sure. I have seen this on other roms that I try to flash?
am I doing something wrong during the flash process?
Wipe (default twrp)
install rom and gapps
clear cache/dalvik
reboot
Tried different gapps with no success..
I tried to flash the first OmniRom (build 1) with the same problems and I also got CM start tutorial when I had flashed OmniRom?? So it feels like the wipe is not working as it should?
Click to expand...
Click to collapse
Where did you get the build? If you got a CM start tutorial then you definitely didn't wipe, and i wonder what exactly you're flashing? This would be anything official Omni
jerdog said:
Where did you get the build? If you got a CM start tutorial then you definitely didn't wipe, and i wonder what exactly you're flashing? This would be anything official Omni
Click to expand...
Click to collapse
Got the Omni from
http://forum.xda-developers.com/showthread.php?t=2517309
and the twrp from
http://forum.xda-developers.com/showthread.php?t=2469995
Others have succeeded using this so no clue what I'm doing wrong? I have flashed other roms, recovery works. Sometimes it seems like it is not wiping it all?
TheErk said:
Got the Omni from
http://forum.xda-developers.com/showthread.php?t=2517309
and the twrp from
http://forum.xda-developers.com/showthread.php?t=2469995
Others have succeeded using this so no clue what I'm doing wrong? I have flashed other roms, recovery works. Sometimes it seems like it is not wiping it all?
Click to expand...
Click to collapse
As this is far from an official build, you will want to direct your issues to the porter/builder of the ROM in that thread you linked.
jerdog said:
As this is far from an official build, you will want to direct your issues to the porter/builder of the ROM in that thread you linked.
Click to expand...
Click to collapse
That would be awesome, thanks
jerdog said:
As this is far from an official build, you will want to direct your issues to the porter/builder of the ROM in that thread you linked.
Click to expand...
Click to collapse
Think I found the problem - a "default" wipe in twrp won't do it - I had to go in to advanced and choose "cache,dalvik,data and system" now it works like a charm! Good to know for the future..
So today I went from stock 5.0.1 to CM 12.1 Nightly (20160110) but gapps keeps crashing which makes my phone semi useless
First Things first
1. Flashed TWRP using Odin
2. Went into recovery and wiped Data and System
3. Installed CM 12.1
4. Installed GApps
5. Wiped Cache/Dalvik and rebooted
Phone boots up normally, And after unlocking the screen a stream of errors emerges, Not sure if i'm using the right gapps or not
Any help is much appreciated
~Chik
Chikyu Tenshi said:
So today I went from stock 5.0.1 to CM 12.1 Nightly (20160110) but gapps keeps crashing which makes my phone semi useless
First Things first
1. Flashed TWRP using Odin
2. Went into recovery and wiped Data and System
3. Installed CM 12.1
4. Installed GApps
5. Wiped Cache/Dalvik and rebooted
Phone boots up normally, And after unlocking the screen a stream of errors emerges, Not sure if i'm using the right gapps or not
Any help is much appreciated
~Chik
Click to expand...
Click to collapse
Did you by any chance use Opengapps? Opengapps is like a hit or miss. Some days they work and some days then don't.
Try these gapps:
http://download.dirtyunicorns.com/files/gapps/banks_gapps/
You need to perform a full wipe though.
Lennyz1988 said:
Did you by any chance use Opengapps? Opengapps is like a hit or miss. Some days they work and some days then don't.
You need to perform a full wipe though.
Click to expand...
Click to collapse
Yes I did try Opengapps which also didn't work
Edit: The gapps is 6.x.x while my phone is 5.1.1, That won't break my phone will it?
~Chik
You need 5.1 gapps then.
Chikyu Tenshi said:
Yes I did try Opengapps which also didn't work
Edit: The gapps is 6.x.x while my phone is 5.1.1, That won't break my phone will it?
~Chik
Click to expand...
Click to collapse
My bad. Here is also another gapps
http://forum.xda-developers.com/android/software/app-minimal-gapps-gapps-lp-20150107-1-t2997368
Lennyz1988 said:
My bad. Here is also another gapps
Click to expand...
Click to collapse
Still :c I only flashed the base tho, Am I supposed to flash the add ons too?
I think you can try a complete boot before flashing Gapps. And try other builds of Opengapps like mini or micro(well or even smaller depending your "Google apps" usage)
CHIN3S3_N00B said:
I think you can try a complete boot before flashing Gapps. And try other builds of Opengapps like mini or micro(well or even smaller depending your "Google apps" usage)
Click to expand...
Click to collapse
Thanks for the reply, I'm downloading micro right now. Gonna fresh install CM 12.1 using TWRP then boot my phone fully before going back to recovery and flashing Gapps
Will edit my post within 30 mins with the result
Edit: No luck, And now for some reason my phone does not recognise my sim card
Could you try GearCM? Official CM for i9500 had lots of issues.
Sent from my GT-I9500
Chikyu Tenshi said:
Thanks for the reply, I'm downloading micro right now. Gonna fresh install CM 12.1 using TWRP then boot my phone fully before going back to recovery and flashing Gapps
Will edit my post within 30 mins with the result
Edit: No luck, And now for some reason my phone does not recognise my sim card
Click to expand...
Click to collapse
Strange... because the symptoms shows like a mismatched gapps to cm... btw are you using the lastest TWRP?
If Yes try other recoveries. I used to use Philz until I bricked mine and had to flash back to stock and now I'm using a modified TWRP to enable dual boot.
If No then try update it and give it another try?
CHIN3S3_N00B said:
Strange... because the symptoms shows like a mismatched gapps to cm... btw are you using the lastest TWRP?
If Yes try other recoveries. I used to use Philz until I bricked mine and had to flash back to stock and now I'm using a modified TWRP to enable dual boot.
If No then try update it and give it another try?
Click to expand...
Click to collapse
I recommend against doing this. The other recoveries are outdated and will give you problems. Stick with the latest TWRP.
Lennyz1988 said:
I recommend against doing this. The other recoveries are outdated and will give you problems. Stick with the latest TWRP.
Click to expand...
Click to collapse
I think that i didn't express myself very well. Yes it's advisable and strongly recommended to use lastest builds of any recovery available as stable build.
But once i had to use Philz to flash a MIUI ROM because TWRP 2.8.6.0 was unable to execute the installation script didn't know why and that's why i said about different recoveries, and oh.... I forgot to say that after successful install rollback to TWRP because it's pretty new , stable and more user friendly than others.(CMW and the rainbow Easter egg was fine but having to use vol and power keys..... NO THANKS!)
Hi all,
I try to run a 6.0 based ROM, but when I first boot the phone after an install the phone reboots after half a minute. It looks like it boots normally, but after entering language and other settings (or also when skipping all) the phone reboots and the process starts over again.
I tried to install factory ROM via ADB, this doesn't give any errors while installing.
The same happens when I try another ROM like CM 13.
Only stable ROM for me is CM12, all other ROMS give reboot.
Any suggestions? Am I installing the wrong ROMs? I have a XT1562, run Squid kernel and latest TWRP.
knielen said:
Hi all,
I try to run a 6.0 based ROM, but when I first boot the phone after an install the phone reboots after half a minute. It looks like it boots normally, but after entering language and other settings (or also when skipping all) the phone reboots and the process starts over again.
I tried to install factory ROM via ADB, this doesn't give any errors while installing.
The same happens when I try another ROM like CM 13.
Only stable ROM for me is CM12, all other ROMS give reboot.
Any suggestions? Am I installing the wrong ROMs? I have a XT1562, run Squid kernel and latest TWRP.
Click to expand...
Click to collapse
You tried tesla rom. Also first just flash the rom and boot. Once it successfully boots up, go ahead with gapps.
Thanks for your answer, it indeed is caused by the Gapps package. When I install a ROM without Gapps, everything works fine. Trying to find a compatible Gapps package now.
K.khiladi said:
You tried tesla rom. Also first just flash the rom and boot. Once it successfully boots up, go ahead with gapps.
Click to expand...
Click to collapse
knielen said:
Thanks for your answer, it indeed is caused by the Gapps package. When I install a ROM without Gapps, everything works fine. Trying to find a compatible Gapps package now.
Click to expand...
Click to collapse
As far as i remember, ever since MM, it's recommended to flash both the ROM and GAPPS together.
varounmirchi said:
As far as i remember, ever since MM, it's recommended to flash both the ROM and GAPPS together.
Click to expand...
Click to collapse
Only 6.0 rom I found that works is DU with Banks Gapps, and yes, had to install them at the same time.
This rom is a battery drain and has gps fix issues for me, not sure if I stay with this rom or go back to CM 12
Sent from my du_lux using XDA-Developers mobile app
varounmirchi said:
As far as i remember, ever since MM, it's recommended to flash both the ROM and GAPPS together.
Click to expand...
Click to collapse
Nope, there's no such requirement. I have just flashed the rom first cause sometimes the Gapps cause stability issues.
Automated reply by JARVIS
One of the most popular custom ROM projects of the last few years, Paranoid Android lost many of its core developers to OnePlus in February 2015. OnePlus recruited them to develop its in-house, following its breakup with Cyanogen. Predictably, PA releases slowed to a crawl, with the last major release, based on Android 5.1, [coming out in July. In October, project lead Matt Flaming announced what pretty much everyone had been suspecting for a while – the Paranoid Android project was on hold.
Now the Paranoid Android project is back into the spotlight, with over a dozen new team members and a new feature-packed release that’s been nine months in the making.
Features coming in this release, some of them familiar and some new, include an improved floating window mode, immersive mode, on-the-spot controls for the behavior of the notification dropdown, a polished quick settings re-order mechanism, battery style, an advanced power dialog, support for Paranoid OTA updates, a theme engine, and support for layers. For certain devices, including OnePlus and Oppo phones, the release offers advanced features like an enhanced kernel, advanced gesture control, and support for the alert slider and fingerprints scanner.:laugh:
Flashing Instructions:Using Twrp
Boot into recovery
wipe/System/Data/Cache/Dalvik
Flash latest Cm Nightlies
Let it boot
reboot to recovery
Wipe system/Data/cache/dalvik
Flash Pa and gapps
Reboot.
Win.
OnePlus One Paranoid Android 6.0 2016 ROM Review! Thanks to @nrp31
www.youtube.com/watch?v=V89296fkzc8
Paranoid Android g+ Page(post your bugs and comments):https://plus.google.com/+ParanoidAndroidCorner
Link: http://get.aospa.co/official/bacon
Source: Android Authority
Some revival. I flashed it and I'm stuck at the OnePlus logo. Apparently someone with a OP2 had the same problem and he fixed it by flashing the system partition before flashing the ROM. I did the same and my phone still won't boot up. Oh well.
I used both TWRP 3 and 2.8.7.0 and am also coming from an unaltered COS 13.
Same issue as @aarthyn. Wiped data, flashed it stuck at OnePlus logo. Used TWRP 2.8.6.1 and came from Sultan's Unofficial CM13 (6.0.1) May 26 build. Restored my backup and now it comes up with a SIM Card not found error.
Not happy.
ch4o5 said:
Same issue as @aarthyn. Wiped data, flashed it stuck at OnePlus logo. Used TWRP 2.8.6.1 and came from a custom rom. Restored my backup and now it comes up with a SIM Card not found error.
Not happy.
Click to expand...
Click to collapse
The download page is blank. Where did u download from?
Stuck on boot logo. Came from cos13. Wiped everything except internal storage.
ch4o5 said:
Restored my backup and now it comes up with a SIM Card not found error.
Click to expand...
Click to collapse
Oh great, I was hoping that wouldn't happen. Looks like I'll have to do the full fastboot works to make sure everything's the way it should be.
At least I know it's not just me.
pa1281 said:
The download page is blank. Where did u download from?
Click to expand...
Click to collapse
From here, but it looks like it's just not working on the OPO for now.
rom is awsm booted for me 9/10 battery life is good just need a bit improvement on charging and camera ! daily driver rom for sure!
aarthyn said:
Oh great, I was hoping that wouldn't happen. Looks like I'll have to do the full fastboot works to make sure everything's the way it should be.
At least I know it's not just me.
From here, but it looks like it's just not working on the OPO for now.
Click to expand...
Click to collapse
Thanks . how did u flash? Did u flash over COS?
---------- Post added at 10:14 AM ---------- Previous post was at 10:13 AM ----------
Dhairya said:
rom is awsm booted for me 9/10 battery life is good just need a bit improvement on charging and camera ! daily driver rom for sure!
Click to expand...
Click to collapse
How did u flash? Ppl here are reporting that ROM is not booting..
Booted fine . coming from omni 6.0.
Here are some screens
http://imgur.com/a/j86BA
pa1281 said:
Thanks . how did u flash? Did u flash over COS?
---------- Post added at 10:14 AM ---------- Previous post was at 10:13 AM ----------
How did u flash? Ppl here are reporting that ROM is not booting..
Click to expand...
Click to collapse
the normal way which we always flash was on cos 13 use twrp 3.0.0.1 and rom is ssly having dam slow charging thats the issue ! nothing else !
How to flash PA rom....
1. Boot into recovery
2. Flash latest CM nightlies (optional)
3. Factory reset
4. Flash PA rom and Bank's Gapps
5. Reboot into system
6. Setup your devices
7. Reboot into recovery
8. Flash SuperSu
9. Wipe Cache and Dalvik
10. Reboot into system
11. Done
Only PA rom and Bank's Gapps can be flash together....if you're planning to flash SuperSu or Custom Kernel you need to reboot into system first then boot back to recovery to flash them (wipe cache and dalvik after flashing them)....
People who are coming from CyanogenOS 13, check your partitions. They might be formatted to f2fs, which may be why your phones don't go past the bootanimation. Mine were formatted to ext4, and I had absolutely no problems doing a clean flash from SultanXDA's latest CM13 build.
iPusak Gaoq™ said:
How to flash PA rom....
1. Boot into recovery
2. Flash latest CM nightlies (optional)
3. Factory reset
4. Flash PA rom and Bank's Gapps
5. Reboot into system
6. Setup your devices
7. Reboot into recovery
8. Flash SuperSu
9. Wipe Cache and Dalvik
10. Reboot into system
11. Done
Only PA rom and Bank's Gapps can be flash together....if you're planning to flash SuperSu or Custom Kernel you need to reboot into system first then boot back to recovery to flash them (wipe cache and dalvik after flashing them)....
Click to expand...
Click to collapse
custom kernel which custom kernel would work here ! ?
#define said:
People who are coming from CyanogenOS 13, check your partitions. They might be formatted to f2fs, which may be why your phones don't go past the bootanimation. Mine were formatted to ext4, and I had absolutely no problems doing a clean flash from SultanXDA's latest CM13 build.
Click to expand...
Click to collapse
Take it you were on the June build of SultanXDA's build @#define? I was on the 26 May version and I got stuck at the OnePlus logo screen.
ch4o5 said:
Take it you were on the June build of SultanXDA's build @#define? I was on the 26 May version and I got stuck at the OnePlus logo screen.
Click to expand...
Click to collapse
Yes I switched from the June 3rd build.
Dhairya said:
custom kernel which custom kernel would work here ! ?
Click to expand...
Click to collapse
i have no idea which custom kernel work for this rom yet as i only tested this rom on stock kernel in PA rom....
iPusak Gaoq™ said:
i have no idea which custom kernel work for this rom yet as i only tested this rom on stock kernel in PA rom....
Click to expand...
Click to collapse
yeah charging sucks in the stock kernel need to know which are the customs one !
wow there's a 6/8 build for the OPO already at PA!
You need to change your filesystems to ext4 before flashing the rom.Otherwise it won't boot.But I cannot see any customization in the rom!
iPusak Gaoq™ said:
How to flash PA rom....
1. Boot into recovery
2. Flash latest CM nightlies (optional)
3. Factory reset
4. Flash PA rom and Bank's Gapps
5. Reboot into system
6. Setup your devices
7. Reboot into recovery
8. Flash SuperSu
9. Wipe Cache and Dalvik
10. Reboot into system
11. Done
Only PA rom and Bank's Gapps can be flash together....if you're planning to flash SuperSu or Custom Kernel you need to reboot into system first then boot back to recovery to flash them (wipe cache and dalvik after flashing them)....
Click to expand...
Click to collapse
can i use open gapps ??
Issue: Whenever i try to install a custom rom for the first time the device is starting normally and it booting, But when i try to install the same rom again, the device goes to bootloop. This happened to all roms i tried. So help me to avoid this issue.
(Note: After the bootloop i manually flashed stock firmware to boot the device)
@Vasanth476
What's the TWRP recovery version you're using currently?
How you flash ROMs, dirty or clean flash?
saurav007 said:
@Vasanth476
What's the TWRP recovery version you're using currently?
How you flash ROMs, dirty or clean flash?
Click to expand...
Click to collapse
I am using TWRP 3.0.2
I did clean flash
Vasanth476 said:
I am using TWRP 3.0.2
I did clean flash
Click to expand...
Click to collapse
When you flash the same ROM second time, that is clean or dirty flash?
But this is weird. One can dirty flash same ROM, there shouldn't be any bootloops.
saurav007 said:
When you flash the same ROM second time, that is clean or dirty flash?
But this is weird. One can dirty flash same ROM, there shouldn't be any bootloops.
Click to expand...
Click to collapse
I did clean flash only. I did everything in order. I dont know where the problem is?