How to replace the stock phone app OOS 3.5.6 - OnePlus 2 Q&A, Help & Troubleshooting

Hello all,
I have been trying to replace the stock phone dialer that was installed when 3.5 update kicked in. I have tried downloading the phone apk Ver 7.0, 6.Something and others Everytime I get the error "package cannot be parsed"
I am very used to the original settings, look and feel and the update screw it up. It tell me that the app version is 6.0.something. also when I look at the contacts app it also takes me to the same phone app screen I am a bit confused. If someone has the zip so I can force I stall from recovery that will be great.
Thank you

To try and clarify this,
I went ahead and flashed Gapps 'stock' and the gapps did overwrite the original dialer but even then this is not working, actually I made it worse :$ now the app has no access privileges see screenshot. Clearly I can simply reflash OOS but, what is live without adventure
Any idea?
By the way I flashed gapps via TWRP

https://forum.xda-developers.com/oneplus-3/how-to/guide-how-to-install-google-dialer-phone-t3443006[/url]
Follow this guide. Even though it's for OP3 it works well for my OP2. Using Google dialer and contacts on 3.5.6. Make sure you use dialer_with_framework-2016-10-18-11-15-31.zip version and flash contacts as well. You need to disable InCallUI system app as well. Good luck.
Sent from my ONE A2003 using Tapatalk

Thanks, I will give it a try I got it working better after performing a factory reset but when receiving a call the UI flashes the OOS dialer for like a sec and then Google dialer takes over, very weird stuff, and one thing I forgot the dialer does has privileges I made sure they were active. At least I can make and receive calls.

So I have performed every step and the dialer is working, however not working as expected, the dialer still has some ghost function, incoming calls activate the OOS dialer first and the Google dialer and from there Google UI remains, however the notification shows 2 ongoing calls...
Maybe I should just forget it since we are supposed to get OOS 4.0 next month.

Did you follow all steps? Disable stock phone and incallui? Changed the default phone app go Google phone app? You flashed both the phone and contacts zip? It should work because I don't get any error during incoming and outgoing calls. Also, isn't the OOS 4 dialer going to be the same because this new dialer is based on pixel design?
Sent from my ONE A2003 using Tapatalk

fatjivi said:
Did you follow all steps? Disable stock phone and incallui?
Click to expand...
Click to collapse
Yes every step was followed, maybe it was the way I flashed everything originally. As I flashed all Gapps in one fell swoop, since this way it attempts to replace and uninstall the stock app. I did verify that inCallUI is disabled the default dialer no longer seems present.
Changed the default phone app go Google phone app? You flashed both the phone and contacts zip?
Click to expand...
Click to collapse
yes i flashed all
It should work because I don't get any error during incoming and outgoing calls. Also, isn't the OOS 4 dialer going to be the same because this new dialer is based on pixel design?
Click to expand...
Click to collapse
I do not know if the OOS 4 dialer will be the same I presume not, this dialer is missing some functionality. In any case right now the phone is functional, a minor annoyance at most. I will wait to see how 4.0 does the dialer if I don't like it I will re attempt flashing Google dialer and this time will find a little slower. At least now I know where are the zip.
Thanks, I will try to reflash the dialer and contacts one more time and see how it goes.

Yes, maybe flashing zip might have messed something up. What these zips do is flash Google framework, phone and contacts. Maybe a clean ROM flash in OOS 4 will work because this works for sure as I've been using it for 3 weeks without any problems. Good luck!
Sent from my ONE A2003 using Tapatalk

Related

Problem with receiving phone calls since updating to XXJPU

Since I updated my phone to firmware JPU, people try to ring me and it doesn't show up on my phone, my phone vibrates for like a second but I don't see any notification showing any call coming through, anyone know what the problem could be and how to solve it?
Sent from my Samsung Galaxy S I9000
Samr happened to me. The vibrate that occurs is a force close. I wadnt able to find any other soloution for this bu to flash a different firmware.
Sent from my GT-I9000 using XDA App
I hoping someone else has problem, and has a solution, I like this firmware and don't really wanna flash again and have to restore all my apps.
Sent from my Samsung Galaxy S I9000
Has no one else had this problem since upgrading?
I have JPU (but in the form of darky's rom v5.2) and the phone rings fine, so I'm not sure if the problem lies in the jpu rom (but maybe it was a bug that darky fixed in the rom, not sure). Unfortunately, I don't know how one would solve this without flashing, but if you are gonna flash, then I really recommend darky's rom, it's one of the best out there atm.
I flashed the low level package with ODIN and phone calls have been fine. Actually asked someone to call me to make sure lol, been a quiet weekend....
TheMaverick said:
Since I updated my phone to firmware JPU, people try to ring me and it doesn't show up on my phone, my phone vibrates for like a second but I don't see any notification showing any call coming through, anyone know what the problem could be and how to solve it?
Sent from my Samsung Galaxy S I9000
Click to expand...
Click to collapse
I can only guess you have a bad app or you have old settings left from other firmware.
Its nothing wrong with jpu firmware.
**Using my own JPU kernel, z4mod, 339MB Ram and ext2 filesystem**
I hope you are not using setcpu .. i had this kind of problem when using secpu ..
Well I've re-flashed now, and didn't restore system data and everything is great now.
P.S. anyone know how to stop 2 notifications every time I get a message, one comes through Handscent and one through the the standard messaging app.
TheMaverick said:
Well I've re-flashed now, and didn't restore system data and everything is great now.
P.S. anyone know how to stop 2 notifications every time I get a message, one comes through Handscent and one through the the standard messaging app.
Click to expand...
Click to collapse
That sounds like it's something that you have to change with your provider. I am with 3 aus and switched off the option to be sms reminded every missed call and it's unnecessary especially seeing as though the phone has that functionality and if you have voice mail you should be sweet to go. Good luck!
TheMaverick said:
Well I've re-flashed now, and didn't restore system data and everything is great now.
P.S. anyone know how to stop 2 notifications every time I get a message, one comes through Handscent and one through the the standard messaging app.
Click to expand...
Click to collapse
You need to go to the stock samsung Messaging app, then press Menu button to go into Settings, and scroll all the way down to 'Notification Settings' and untick the Notifications option. Now you should only receive it through Handcent only.
My friend had the same problem.
Here is the solution:
1, flash XXJPU
2, do a factory reset and wipe data + cache from recovery menu
3, do not restore system apps from titanium backup, just the 3rd party softwares.
That's all, the phone app will work.
The problem is, the old phone app leaves some cache and other crap and the new phone app doesn't works. That's way the solution is factory reset and wipe data + cache.
I hope it helps you. You do not need to flash again the phone, etc. Just do what I wrote.
Not a FW problem
Hi, this happend to me with XFJP7 FW. It started after I did several things:
1) did fix permissions in CWM
2) tried stock lockscreen (didn't work the several times, but finally worked)
3) restore with TitaniumBackup
I had backup of /system/framework directory, but restoring it didn't help. I ended up with flashing again with selective restore. Didn't try stock lockscreen nor fix permissions yet.
HTH
Mody
Probably same source here which also causes the "No-Vibration-Issue".
In most cases this is being caused by using a Lockscreen-/ Extended Power Menu-/ Circle-Battery-Mod that wasn't originally build and modified especially for your firmware. There's only a limited amount of ressources available for the system.
In some cases they first -seem- to work fine.
But in the backgound they (mostly) disable or block other functions because your new firmware wants to use the same registers or adresses (which the "wrong Mod" uses) for other os-functions.
In the end, I just re-flashed and only restored apps instead of system data + apps and now its working fine. Bingo!
When I receive a call, first the lockscreen shows up on my screen (instantly) for like a second and then it changes and I can answer the call. I have stock android lockscreen and 2.2.1. Do you think I have the same problem as others here or is this a different one?

[Q] Upgraded to CM10.2-20130814-NIGHTLY-mako, cannot make phone call anymore

Someone please help.
I upgraded my Nexus 4 from CM10.1 to CM10.2-20130814-NIGHTLY-mako through settings-Cyanongenmod Updates.
Now I experience the following issues:
1), when making/receiving phone calls, no sound in/out; If I put on speaker, I can hear other people talking.
2), cannot download/update anything from Google Play.
Please help.
tenc417 said:
Someone please help.
I upgraded my Nexus 4 from CM10.1 to CM10.2-20130814-NIGHTLY-mako through settings-Cyanongenmod Updates.
Now I experience the following issues:
1), when making/receiving phone calls, no sound in/out; If I put on speaker, I can hear other people talking.
2), cannot download/update anything from Google Play.
Please help.
Click to expand...
Click to collapse
I recommend backing up your phone and then wiping it and doing a clean install of 10.2
Is it only me? does anyone else have the same problem?
I understand a clean installation may fix the problem; but I am trying not to do that due to time consuming before and after every clean installation. Normally, take me a whole day to go through settings and home screen layouts.
By the way, I cannot revert back to CM10.1 through settings-CyanogenMod Updates; screen stays on loading icon forever. Any ideas?
knitler said:
I recommend backing up your phone and then wiping it and doing a clean install of 10.2
Click to expand...
Click to collapse
tenc417 said:
Is it only me? does anyone else have the same problem?
I understand a clean installation may fix the problem; but I am trying not to do that due to time consuming before and after every clean installation. Normally, take me a whole day to go through settings and home screen layouts.
By the way, I cannot revert back to CM10.1 through settings-CyanogenMod Updates; screen stays on loading icon forever. Any ideas?
Click to expand...
Click to collapse
Use Helium. Then you can back up your settings, Launcher settings, text messages, ect, apps included if you want to your Gdrive, wipe, re-install and then just download Helium and pull it back down. It takes me about 4 minutes to back up my settings for:
Touchdown
Airdroid
Launcher
WiFi settings
Messaging
Chrome
G+
Keep
Voice
Skype
Hangouts
Then I wipe and flash a new ROM + Gapps (5min, if that), pull down Play Store update + Apps that I want to put back on my phone(about 7-10min), and then restore my settings(about 5min). I'm ready to go in maybe 25 minutes with the exact same setup I had before I started
It will take longer if you are backing up music, games and a lot of images too, but I have all my photos auto-upload to my G+ so I don't worry about backing those up, and my music is in the Play Music so I just thumbtack the ones I want to keep as i come acorss them again.
You need to update to the latest radio. Flash a 4.3 image with fastboot, then unlock, root, etc.
Sent from my Nexus 4
AND flash the latest Gapps: http://goo.im/gapps
if you are using lte, then you need one of the hybrid radios. if not, then the newest radio.
... too late to know all these and the Helium...
In the afternoon, I used titanium backup; and did a clean install of the cm10.2; same problem...no phone call; then I did a clean install of a old cm10.1; it works now!!!
when I am so excited to use titanium to recover my apps.... no backup file available... only .properties files in the folder.... zip files are missing.
I've lost all my app data and everything... until now, I am still trying to recover what I could remember...
pepdavies said:
You need to update to the latest radio. Flash a 4.3 image with fastboot, then unlock, root, etc.
Sent from my Nexus 4
Click to expand...
Click to collapse

[Big Bug] Calling running ART

Well, guys let's see if you can help me...
I had the doubt about running ART, because you know it, in LOLLIPOP there's necessary ART, so I changed DALVIK to ART, I was using all totally good, but... When I was trying to call somebody:
I press the number in PHONE app and if I press 2 NUMBERS It says "CONTACTS HAS STOPPED". I try a lot of stuffs, REALLY A LOT. But, when I gave up, I remember the ART change, so I turn back to DALVIK started phone app, press ALL THE 10 DIGITS NUMBER and there's no problem.
So:
In Art: PHONE APP CRASHES (sorry about the music is youtube option)
http://youtu.be/_Y6HMOC7h-8
In dalvik: Everything goes normal
(Sorry about the music is youtube option)
http://youtu.be/lJmTZChkQes
I've been using my phone for 1 week. It is rooted and is the EXYNOS 5433 version.
Have you tried it?
Is it just my phone?
Why you just don't try to install a new ROM. I think you pretty much known about it if you are rooted. Else in recovery just clear everything(factory reset) and then try to again use see if the problem is solved...
Sent from my XT1033 using XDA Free mobile app
Hi, It is just your phone. I switched to Art about an hour after buying the phone, I am able to dial and use the whole without any crashes. The contacts and dialer works fine. Did you try to disable any apps / services manually?
No New rom
Well, There's no new ROM, for exynos, so I'll pass for this time, and yes I'm lretty sure that if I do a full reset There won't be any troubles on that apps. It just was so curious.
Did you root your phone before change to art? Is exynos version? I did it since wednesday, If I have more time I'll do a back up of all my apps and I'll do A FULL RESET in recovery, I'm just waiting to install CWM recovery.
It's probably best to wait for L to start using ART. Seems everyone that had tried it has run into problems.

Contacts sync issue with 3 Axon 7's

So my first Axon 7 (grey) was working fine and great, however it had vibration problem and a bad charger that came in the box, so I had to send it back.
My 2nd Axon 7(gold) and 3rd one (grey) are both suffering from performance issues and battery drain due to near 100% cpu load all the time. At first i thought it was a hardware issues, so I sent the gold one back. And I am troubleshooting it one the grey one now.
I updated to B27 and also did a factory reset multiple times, but this issue won't go away.
android.process.acore is causing my CPU to stay around 100% all the time. The cuplrits included in this package are
i) Contacts
2) Call log/backup restore
3) ContactsStorage
4) User dictionary
all of these are system apps that are somehow related to contacts syncing. Please help me. I tried all i can and it's driving me nuts. I already returned my Note 7 and this is my third Axon 7 phone after that. I don't know what else to do.
Thanks
Sent from my ZTE A2017U using Tapatalk
- What Update are you right now?
- Have you perform a full factory reset?
- Are rooted or / and unlock bootloader?
I am on B27 now
Not rooted or unlocked, completely stock and yes i did complete factory reset multiple times
Sent from my ZTE A2017U using Tapatalk
DrakenFX said:
- What Update are you right now?
- Have you perform a full factory reset?
- Are rooted or / and unlock bootloader?
Click to expand...
Click to collapse
Can you help? When I received the phone it was on B20, immediately updated OTA to B27. I am trying to see what I can do. I rooted and installed Xposed just now without unlocking the bootloader.
Will this issue be solved if I reflash the ROM?
krishelnino said:
Can you help? When I received the phone it was on B20, immediately updated OTA to B27. I am trying to see what I can do. I rooted and installed Xposed just now without unlocking the bootloader.
Will this issue be solved if I reflash the ROM?
Click to expand...
Click to collapse
I was going to say something like that LoL, you can backup current configuration and head over my Full Stock Update thread and download only StockSystem file, wipe data ,cache,dalvik ,system and flash that zip using TWRP. see if that helps.
P.S. how you manage to get root with B27 lock bootloader?
DrakenFX said:
I was going to say something like that LoL, you can backup current configuration and head over my Full Stock Update thread and download only StockSystem file, wipe data ,cache,dalvik ,system and flash that zip using TWRP. see if that helps.
P.S. how you manage to get root with B27 lock bootloader?
Click to expand...
Click to collapse
I followed this guide by @tenfar to get root
http://forum.xda-developers.com/axon-7/development/wip-axon-7-root-bootloader-unlokced-t3441204
@DrakenFX, can I follow your guide in this thread Post # 2?
http://forum.xda-developers.com/axon-7/development/rom-guide-updates-to-stock-files-via-t3469484
Mine is on B27 rooted, TWRP and Xposed installed but the bootloader is LOCKED. So can I follow your guide to go to B27 stock? Please advise
krishelnino said:
I followed this guide by @tenfar to get root
http://forum.xda-developers.com/axon-7/development/wip-axon-7-root-bootloader-unlokced-t3441204
@DrakenFX, can I follow your guide in this thread Post # 2?
http://forum.xda-developers.com/axon-7/development/rom-guide-updates-to-stock-files-via-t3469484
Mine is on B27 rooted, TWRP and Xposed installed but the bootloader is LOCKED. So can I follow your guide to go to B27 stock? Please advise
Click to expand...
Click to collapse
Yep, just DON'T flash Boot stack just download and do Stock system
DrakenFX said:
Yep, just DON'T flash Boot stack just download and do Stock system
Click to expand...
Click to collapse
Do I need to wipe the system? I really don't want to mess it up as this is my only phone
Thanks so much once again
krishelnino said:
Do I need to wipe the system? I really don't want to mess it up as this is my only phone
Thanks so much once again
Click to expand...
Click to collapse
Step 1 : DO A BACKUP TO YOUR SDCARD ( Don't do it in Internal Storage).
Step 2 : WIPE Data ,Cache, Dalvik and preferable SYSTEM
Step 3 : Flash B27 stock system.
You won't mess up something so simple,
DrakenFX said:
Step 1 : DO A BACKUP TO YOUR SDCARD ( Don't do it in Internal Storage).
Step 2 : WIPE Data ,Cache, Dalvik and preferable SYSTEM
Step 3 : Flash B27 stock system.
You won't mess up something so simple,
Click to expand...
Click to collapse
I am surprised and disappointed this hasn't solved my issue Is there a way to go back to B20 from B27?
Try disabling Google Contact Sync in Settings > Apps > ... > Show System > Google Contacts Sync > Disable
xtermmin said:
Try disabling Google Contact Sync in Settings > Apps > ... > Show System > Google Contacts Sync > Disable
Click to expand...
Click to collapse
Already tried that, but no use.
I had this exact same issue. Tried most of the things on this thread with no luck.
Eventually realized I had almost 4k contacts on my Google Contacts (ton of emails saved in Google Contact). I went to Google Contacts (through Gmail) on a desktop browser & deleted all the contacts that I didnt need (check out the old view for GOogle Contacts - it has a separate list of unused contacts which you delete).
After this, clear your Data on "Contacts Storage" under Apps in Setting. Now re-sync your contacts, and you're good to go. I spent almost 2 days fixing this issue. But all good now.
antonymarceles said:
I had this exact same issue. Tried most of the things on this thread with no luck.
Eventually realized I had almost 4k contacts on my Google Contacts (ton of emails saved in Google Contact). I went to Google Contacts (through Gmail) on a desktop browser & deleted all the contacts that I didnt need (check out the old view for GOogle Contacts - it has a separate list of unused contacts which you delete).
After this, clear your Data on "Contacts Storage" under Apps in Setting. Now re-sync your contacts, and you're good to go. I spent almost 2 days fixing this issue. But all good now.
Click to expand...
Click to collapse
I was going to try this eventually. Though I have only around 600 contacts.
have problem with contacts too on Axon 7, my contact is added with name and surname, but when this person call to me it display only it's phone number.
The same is in textra sms app, cantacts conversations are showed with phone numbers not person names.
is any way to fix this, on my previously HTC 10 didn't have any similar issues?
Same problem. Some contacts are shown with just a number during calls or textra sms. Must be a bug. Hope they will fix it...
but is any e-mail to ZTE support to let them know about this issue?
I also had same issue. contacts were not syncing properly. i have 1300 contacts. i was just enabling sync for 10-15 minutes then again disabling for 1 minute then did it repetitively . it took me about 36 hours to sync all my contacts. (yes i was on B27).
I see that all my contacts has been synced with gmail, but still on receiving calls and in textra saved contact are presented with their phone number
slowly consider to sell this great phone because of software bugs ;(
Hi,
I am using the Chinese A2017 & having contacts syncing issues with google account as well my office exchange email ID. Can anyone tell a fix?

How to replace system phone

I have a rooted moto g5 plus with stock rom. I have installed a number of dialer and contact apps and set them as default but all incoming calls still use the system phone. What am I missing? Please advise. Thanks.
are you using google dialer? and do you have dialer frameworks and maybe check by going to settings>apps>that gear icon there and changing defaults
Install gapps it'll automatically install pixel like phone framework. Or install rom with 7.1.2 nougat rom.
Can I install gapps over a stock rom? I have tried using many of the custom roms but had issues with the camera and with cell connection. I fastbooted back to stock, rooted the phone and those issues are gone. Not sure why, it is my girlfriend phone and I don't think she cares anyway. She would like a better dialer with bigger icons and that is the reason for this post. Thanks.

Categories

Resources