Related
which the best android head unit for qashqai 2014 360 camera vision?
SUV users don't deserve nice units
hehe is a joke
forziere said:
which the best android head unit for qashqai 2014 360 camera vision?
Click to expand...
Click to collapse
Are you still looking for a Head Unit or have you fitted one.
What kind of qashqai do you have the J10 , J10 MK2, J11 ?
HgtDave said:
Are you still looking for a Head Unit or have you fitted one.
Click to expand...
Click to collapse
Link to Android Head Unit fitted to J11 Tekna with 360 Cameras and Park Assist https://www.qashqaiforums.co.uk/viewtopic.php?f=29&t=3465#p59657
I fitted the pumpkin auto 4gb android 8.0 unit to my j10 2013 qashqai.
Front camera is a bit fiddly to get working, but it works.
I made a video of it working here
Read the comments for more useful hints. Watch out for how you wire the camera button. I (And one of the commenters) blew fuses in our bcm. My car was off the road for a cpl of weeks haha!
I have since rooted my unit, because it allowed me to have tasker run and not be killed when turning off the ignition. I setup a profile which flashes up a "Activate front cam" menu whenever the car goes below 3mph.
Before I did this it involved 4+ button presses to get the front cam up. Now the button is there when I need it.
If you need any pointers feel free to ask. :laugh:
I have been using joying head unit for a few years. You get the 360 camera input to work, I had to change the signal wire logic level from 6v to 12v. Easily done with a couple of transistors.
I have split my reversing camera with a "Y" cable so one feeds the normal reversing camera in floating socket so it works like a normal reversing camera-it starts up when reverse is engaged, the other I have plugged into the Video-In socket on the rear.
I want this because I have in the space of 12 months had 2 new cars written off by other idiot drivers, luckily I had a dashcam with front and rear cameras which plainly showed I was blameless, even stationary for the first accident.
I vowed never to buy another new car as the trauma of losing my babies is just too much! So I got an old VW EOS, a 2007 model, and there is nowhere to fit a rear camera in this hard-top convertible.
The only app that I have so far found to work with this arrangement is the "AUX" stock application-this works well, but it captures the audio channel too so the radio and music applications are muted.
Has anybody come across an app which can monitor this Video-In socket-they all seem dead set on usb cameras.
Cheers, Tony.
vidtek said:
I have split my reversing camera with a "Y" cable so one feeds the normal reversing camera in floating socket so it works like a normal reversing camera-it starts up when reverse is engaged, the other I have plugged into the Video-In socket on the rear.
I want this because I have in the space of 12 months had 2 new cars written off by other idiot drivers, luckily I had a dashcam with front and rear cameras which plainly showed I was blameless, even stationary for the first accident.
I vowed never to buy another new car as the trauma of losing my babies is just too much! So I got an old VW EOS, a 2007 model, and there is nowhere to fit a rear camera in this hard-top convertible.
The only app that I have so far found to work with this arrangement is the "AUX" stock application-this works well, but it captures the audio channel too so the radio and music applications are muted.
Has anybody come across an app which can monitor this Video-In socket-they all seem dead set on usb cameras.
Cheers, Tony.
Click to expand...
Click to collapse
The custom ROM has the right camera app that supports this. Video only.
Why don't you get the camera that fits in the VW emblem??
gtxaspec said:
The custom ROM has the right camera app that supports this. Video only.
Why don't you get the camera that fits in the VW emblem??
Click to expand...
Click to collapse
Thanks for this, do you know the name of the app please?
With the number plate camera, it is:
a) far easier to fit, especially as my rear mudguard is cut where my removable tow-hitch sits, wiring is a doddle.
b) The emblem camera it sits so high, my wife's cat would probably not be visible, it has a habit of sitting just underneath the mudguard.
c) Much less expensive.
Cheers, Tony.
Recently installed a GA9180a for my 2010 Chevy
runs really nice out the box, start up time is around 20 seconds or less
i'm getting some serious electrical interference noise once the car is started and increases with rpm, if the car is off I do not hear it, I believe this is a known issue with the fm antenna adapter. I bought a fm antenna noise filter to fix this hopefully.
ok google commands work well, I was wondering if theres a way to make phone calls, if I tell google to call...it will not dial out just show a phone logo with the contacts name, has anyone been successful with this?
also, want to remove the wire so while reversing audio will not be cut out, i think its an orange wire
anyone know of the standby mode as well, so the unit does not shut off completely when off?
also, need help with and looking to add my OEM GM reverse camera and have to splice into lines
looking to use the stock GM male mini USB adapter to connect to the back of this unit, so the usb in my center console can charge devices
To the poster above me, theres a setting under the CAR category to enable audio while reversing - you shouldnt need to cut any wires.
I bought this same head unit back in may and im just now getting around to installing it into a 2010 silverado without the factory bose option. The instructions that came with it are a joke. On bluetooth only, theres alternator whine thats easy to hear at higher volume levels and BT audio causes the pillar tweeters to clip/crackle/cutout at certain frequencies. This is more pronounced on rock music with drum cymbals, like most five finger death punch tracks. Funny thing is, that completely goes away when listening to the FM radio or any of the apps on the device like spotify. This is tolerable since the only thing i use BT for is making calls through my phone. Phone calls are not so demanding in the quality department and honestly i can live with it.
What im having the worst luck with is the backup camera. Ive got a backup camera hooked to it using the included 'cam' yellow RCA connector. Ive only connected it for testing at this point and with it getting a solid 12v supply right off the battery, its not working with the head unit. The head unit successfully detects reverse and switches to the camera display, but the screen stays black and theres a yellow diamond with an exclamation point at the center of the screen. Switching to any other gear or back to park returns the head unit to whatever screen it was on before. I checked the camera on another screen and it displays fine. Prior to that, I checked the inline fuse and replaced it just to be sure. Ive already gone through the settings in the head unit itself, video while moving is turned on.
Ive read/seen other people with similar head units (joying, etc) having to disconnect an 'orange wire' from the back of the head unit to get backup video to work correctly. HOWEVER, there are only 2 wires going to my head unit that are orange, one is orange/white and handles illumination while the other is orange/black and handles the reverse signal from the vehicle itself. I disconnected the orange/black wire just to see if that was it. It was not. With this wire disconnected the head unit no longer detected when the vehicle was in reverse and the screen never changed when i put the vehicle into reverse.
At this point im thinking theres gotta be a firmware bug, hardware failure on my particular unit or im doing something wrong. The vehicle-radio harness that came with it is plug and play. The camera itself connects with a single RCA plug and has a positive and negative lead for battery power. I dont know WHAT could possibly be connected incorrectly, but its a theory.
My ask here is if anyone has experience with this head unit, or with eonon head units in general. Does anyone have a clue how i could solve this backup camera problem?
FYI:
there is a can bus decoder in the 'plug and play' vehicle-radio harness, disconnecting it causes the head unit to not wake up when the truck turns on.
this is the new and upgraded version from eonon
android 8.0
px5
4gb ram
32gb storage
feellicks said:
My ask here is if anyone has experience with this head unit, or with eonon head units in general. Does anyone have a clue how i could solve this backup camera problem?
Click to expand...
Click to collapse
I just got my unit also and have the exact same problem as you with the reverse camera, also like you i found lots of talk about cutting the orange wire however I wasn't game to do this yet but it seems like that is not the solution.
it sounds like you guys have a OEM back camera and if your backup camera video shows on rear view mirror check this link:
https://www.youtube.com/watch?v=iOUzGLevxqU
If your backup camera shows on old OEM radio system, check this link
https://www.youtube.com/watch?v=EzvycdsdIDA
I did some research but I didn't try it yet. I have backup camera on rear view mirror.
Rear DVD Controls/ DVD Player on 2010 Chevy Avalanche
I recently installed the Eonon GA9180a in my 2010 Chevy Avanlanche with Bose and Rear DVD, first I’m also getting a lot of interference from the radio when the WiFi and Bluetooth are on, wondering if a installing a noise canceling module will fix this? Also I seem to have lost the functions of my rear controls for the DVD players, I’m also wondering if anyone has figured out if this unit allows to watch a movie in the back (rear seat) while listening to music in front main unit?
not sure what you mean by installing a noise cancellation module, i had this unit and I never got the interference noise to go away, I switched a Xtrons unit and it worked well for a couple of months but then the screen went out. I got a replacement but now im getting the same noise interference
Sorry I was talking about a Automotive Noise Suppressor of some sort, just wondering! I really like the deck and features but there are some limitations!
GA9180A
Did you ever get your backup camera to work with the GA9180A?
I have tried it with the regular purple wire "CAN IN" supposed to be "CAM IN". I have tried it as AUXILIARY. I can't get the damn thing to work.
I installed a pumpkin brand in my buick and I had to build my own harness and I got it working first try. This eonon plug and play unit is not working.
If you have it working could you please let me know how. It would be awesome with pictures.
I have the factory bose. I found that ebay instructions were better than Amazon instructions.
They have the purple "CAN IN" plugged into a video out. I don't know why. I would assume that a large number of people are installing a camera and would need to connect the CAM IN into the RCA coming from the camera.
This is the most frustrating install ever. The amazon seller doesn't understand I want a working backup camera.
Eonon says it should work. Nothing more.
Thanks,
Chad
I own a 2013 Silverado with the same radio. The fix is simple.
Engine noise fix.
Take about 6 inches of copper wire. Wrap it around the Sub rca (Blue) coming out the back of the harness and ground it to a screw on the radio. (I drew a red line in the picture showing how to fix it)
If your camera is not working you might have it in the correct rca but the harness might be in the wrong place. the camera wire harness fits into 2 spots on the back of the radio. make sure you put it in the correct slot. look at the picture i posted for your engine noise issue and the correct spot for the harness.
GonzoBean what kind of radio did you have before? if you had a cheap factory radio the basic one chevy gives there is a little more work to get the backup camera to work. Thats if you have a factory backup camera already installed that goes to the mirror. you need to tap into the signal.
**Edit**
2nd picture is for proper wire harness install for bose system.
GA9180A
BIG Thanks for the grounding tip and for the diagram. I am installing a new camera so the feed is coming from the new camera, not the existing wiring harness.
I have tried connecting the camera RCA feed to the "CAN IN" eonon typo should read "CAM IN". The headunit detects when I am in reverse and I get yellow ! triangle.
I have tried connecting the camera RCA feed to the "AUX IN" and then open the "AUX IN" app and I get the yellow ! triangle.
I have tried 2 different backup camera's.
Surely someone has installed a new camera to this unit. Eonon has not been helpful.
Thoughts? Ideas?
Thanks,
Chad
KidGixxer said:
I own a 2013 Silverado with the same radio. The fix is simple.
Engine noise fix.
Take about 6 inches of copper wire. Wrap it around the Sub rca (Blue) coming out the back of the harness and ground it to a screw on the radio. (I drew a red line in the picture showing how to fix it)
If your camera is not working you might have it in the correct rca but the harness might be in the wrong place. the camera wire harness fits into 2 spots on the back of the radio. make sure you put it in the correct slot. look at the picture i posted for your engine noise issue and the correct spot for the harness.
GonzoBean what kind of radio did you have before? if you had a cheap factory radio the basic one chevy gives there is a little more work to get the backup camera to work. Thats if you have a factory backup camera already installed that goes to the mirror. you need to tap into the signal.
**Edit**
2nd picture is for proper wire harness install for bose system.
Click to expand...
Click to collapse
This image shows which wire is the rear camera in and where the harness should be plugged into.
Did you hook the camera up? rca from camera to radio. Power to reverse light?
Did you go into car settings on radio? code 126 and make sure rudder is on.
Ill be in and out of here all day. So we can get this problem solved for you.
The camera has power it is connected to backup lights. I tried 2 different cameras.
From your picture I have rca plug 10 connected to my backup camera's rca feed. Why is it necessary to plug 11 to 12, 13 to 14, 15 to 16 or is it?
I have also tried my backup camera feed to the AUX IN and use the AUX IN app also without any luck. I had to wire a power line for that test.
Thanks KidGixxer, I was out of town today, but will check into "rudder is on".
I will let you know what I find about "rudder is on"
KidGixxer said:
This image shows which wire is the rear camera in and where the harness should be plugged into.
Did you hook the camera up? rca from camera to radio. Power to reverse light?
Did you go into car settings on radio? code 126 and make sure rudder is on.
Ill be in and out of here all day. So we can get this problem solved for you.
Click to expand...
Click to collapse
Hello. Same issue as the above posters. I made sure rudder was on and still a failed camera feed with the exclamation point triangle.
The option right above Rudder is what you need to check.
Its called "Prohibit Reverse" Make sure that is off.
And make sure your camera mode is set to "F-CAM"
KidGixxer said:
The option right above Rudder is what you need to check.
Its called "Prohibit Reverse" Make sure that is off.
And make sure your camera mode is set to "F-CAM"
Click to expand...
Click to collapse
So I put the "Prohibit Reverse" toggled to off which was default to off. With the cam set to F-Cam. I still have the yellow/red/green grid with a blacked out screen when I go to reverse. Anyone else have this same issue?
Antabolic said:
So I put the "Prohibit Reverse" toggled to off which was default to off. With the cam set to F-Cam. I still have the yellow/red/green grid with a blacked out screen when I go to reverse. Anyone else have this same issue?
Click to expand...
Click to collapse
If you're seeing the green yellow red grid it might be an issue with the camera itself. If the camera was not hooked up you would get a yellow triangle with an exclamation point.
KidGixxer said:
If you're seeing the green yellow red grid it might be an issue with the camera itself. If the camera was not hooked up you would get a yellow triangle with an exclamation point.
Click to expand...
Click to collapse
It also does that as well. At random it seems, going back and forth between the grid and the triangle
I haven't got the camera issue as I ended up going with an aftermarket reverse camera, but I have an annoying issue with background noise/static.
It seems to be similar to the computer generated noise that cheap/early sound cards had in the background. It's enough to be noticeable if the car is idling and the volume is very low.
It doesn't get worse with speed, it is just a constant background static that seems to be computer generated.
I tried wrapping some shielding around the audio cables, but this made no difference. Grounded the headunit directly to the chasis with copper wire, made next to no difference.
Any ideas on the noise would be appreciated.
To the people that still have camera issues. are you using the factory camera that came with your vehicle. Or an aftermarket brand. If its aftermarket the camera might be bad. or bad wiring.(Did you wire the power source to the reverse light and not the brake light. also the camera wont turn on if you e brake is engaged.)
If you are using a factory camera you cant go by the wiring that the manual that comes with the radio says. It wrong. you will need to get a rca cable and cut one side and tap into 2 wires by the bcm near the gas/brake pedals.
aust_white said:
Grounded the headunit directly to the chasis with copper wire, made next to no difference.
Any ideas on the noise would be appreciated.
Click to expand...
Click to collapse
That only helps with engine noise.
Turn off Bluetooth and WiFi on the radio and you will hear that the static is gone. There is currently no fix for this.
We were discussing this in this post.
This post to be more specific.
We were looking into rerouting the wires inside this radio. The Bluetooth wire is taped to the top of the am/FM receiver and the WiFi wire route near it as well.
I was going to redo the wiring in my radio but haven't had the time.
KidGixxer said:
To the people that still have camera issues. are you using the factory camera that came with your vehicle. Or an aftermarket brand. If its aftermarket the camera might be bad. or bad wiring.(Did you wire the power source to the reverse light and not the brake light. also the camera wont turn on if you e brake is engaged.)
If you are using a factory camera you cant go by the wiring that the manual that comes with the radio says. It wrong. you will need to get a rca cable and cut one side and tap into 2 wires by the bcm near the gas/brake pedals.
That only helps with engine noise.
Turn off Bluetooth and WiFi on the radio and you will hear that the static is gone. There is currently no fix for this.
We were discussing this in this post.
This post to be more specific.
We were looking into rerouting the wires inside this radio. The Bluetooth wire is taped to the top of the am/FM receiver and the WiFi wire route near it as well.
I was going to redo the wiring in my radio but haven't had the time.
Click to expand...
Click to collapse
Unfortunately the noise on my unit seems unrelated to Bluetooth or WiFi.
I'll keep digging.
Thanks for your help.
Checking here if someone has had the same issue.
Car: 2012 Honda Accord with premium sound system (subwoofer in side wall of the boot).
Unit: Prelingcar android 10, 4GB/64GB MCU verison Ts9.4.3-100-20....
Basically everything works except no sound from subwoofer, and balance front/rear. When balance is in the middle there is sound from the rear speakers, but if I drag it aft, everything goes silent.
Haven't found any setting that gets the subwoofer going.
Bought the unit second hand here and according to the previous owner he figured out that there is a subwoofer amplifier that is supposed to communicate through CAN, but he didn't have the time to do any research. I bought it knowing this of course, and it's not the end of the world if I don't get the sub running but it would be kind of nice.
I have tried to find a pin-diagram of the pinouts of the original stereo to try to trace where the SUB audio output is but haven't found any, so that is also one thing that could be helpful if someone out there has any wiring diagram. I'm thinking if there could be a pin missing in any of the wire harnesses or something like that. (hoping for an easy fix, yes I know.. )
I'm a complete noob in this area so maybe I have missed something obvious.
Hello! Recently bought a junsun v1 device 2gb/32gb with allwinner T3 p1 chip runs android 11 (8.1). I tried to find code for enter engineer Mode to make it boot faster but nothing worked for me.
Furthermore i faced a problem with steering wheel control setup.
I do the setup, for a wille everything works great but after a few minutes the buttons are messed up.
Has anyone faced something like this!? Do you think is wiring problem or software (application bug).. I had another head unit before and didn't have any problem.
vaggostrik said:
Hello! Recently bought a junsun v1 device 2gb/32gb with allwinner T3 p1 chip runs android 11 (8.1). I tried to find code for enter engineer Mode to make it boot faster but nothing worked for me.
Furthermore i faced a problem with steering wheel control setup.
I do the setup, for a wille everything works great but after a few minutes the buttons are messed up.
Has anyone faced something like this!? Do you think is wiring problem or software (application bug).. I had another head unit before and didn't have any problem.
Click to expand...
Click to collapse
Hi, do you have canbus and its settings in infotainment / factory settings ?
Yes it has but i don't know how to setup it. Don't know much about canbus! The car is suzuki swift 2007 if this helps
vaggostrik said:
Yes it has but i don't know how to setup it. Don't know much about canbus! The car is suzuki swift 2007 if this helps
Click to expand...
Click to collapse
in canbus menu will be number of vehicles supported from this canbus device, select number for your vehicle model and year and save and then restart and see if controls are working
I will give it a try! Thank you very much
Didn't work for me.. Still messed up
vaggostrik said:
Hello! Recently bought a junsun v1 device 2gb/32gb with allwinner T3 p1 chip runs android 11 (8.1). I tried to find code for enter engineer Mode to make it boot faster but nothing worked for me.
Furthermore i faced a problem with steering wheel control setup.
I do the setup, for a wille everything works great but after a few minutes the buttons are messed up.
Has anyone faced something like this!? Do you think is wiring problem or software (application bug).. I had another head unit before and didn't have any problem.
Click to expand...
Click to collapse
I have the same problem with the steering wheel control settings ( I do the setup, for a wille everything works great but after a few minutes the buttons are messed up.)
Please did you solve the problem?
Karves79 said:
I have the same problem with the steering wheel control settings ( I do the setup, for a wille everything works great but after a few minutes the buttons are messed up.)
Please did you solve the problem
Click to expand...
Click to collapse
No i didn't problem still here
vaggostrik said:
No i didn't problem still here
Click to expand...
Click to collapse
that's a shame, I wrote to Junsun, so I'm waiting for him to write back.
Karves79 said:
that's a shame, I wrote to Junsun, so I'm waiting for him to write back.
Click to expand...
Click to collapse
Hope to have an answer soon.. You have the same model? With allwinner T3 p1 processor?
vaggostrik said:
Hope to have an answer soon.. You have the same model? With allwinner T3 p1 processor?
Click to expand...
Click to collapse
Yes I have allwinner T3 p1.
Guys try replacing a canbus box for device if you have any other available.
If not, order a stable one, but first you must see if device has canbus box (a box that communicates with car computer)
Problem with steering wheel controls solved. The seller wrote me back, tested and works!
Steering wheel control learning interface, reset the button in the upper right corner
Then click on the impedance selection, switch to select high and low impedance, and then learn the square control button again.
Karves79 said:
Problem with steering wheel controls solved. The seller wrote me back, tested and works!
Steering wheel control learning interface, reset the button in the upper right corner
Then click on the impedance selection, switch to select high and low impedance, and then learn the square control button again.
Click to expand...
Click to collapse
Thank you very much i will give it a try. But to be honest i can't understand exactly what i should do .
vaggostrik said:
Thank you very much i will give it a try. But to be honest i can't understand exactly what i should do .
Click to expand...
Click to collapse
OK seems to work for me too!! I will check it more! Thanks again my friend!
Cool. I'm glad I helped you. Now I'm dealing with a new problem, my rear speakers are not playing.
edit: so the problem is not with the radio but with the car
Karves79 said:
Cool. I'm glad I helped you. Now I'm dealing with a new problem, my rear speakers are not playing.
Click to expand...
Click to collapse
So sorry for that. Mine works great! Don't have such problem. Are you sure is the head unit responsible for that?
As far as i m concerned the only thing that bothers me is that when i start the car always have to wait to boot... And can't find a solution
I think they played the rear speakers on the original radio. But I won't try again. I don't mind that much. I'll just have to buy an fm amplifier, it's not as strong as the original radio. Otherwise the radio is great.
Hello friends! I have a Jansun V1 head unit based on Allwinner quad-core t3 p1, 2/32 gb on Android 11
How can I set it so that the car radio does not turn off at all when the engine is turned off, but goes into sleep mode. I want the car radio to be immediately ready for use the next time the engine is turned on, and not wait for a long boot. Thank you!
Nakhman said:
Hello friends! I have a Jansun V1 head unit based on Allwinner quad-core t3 p1, 2/32 gb on Android 11
How can I set it so that the car radio does not turn off at all when the engine is turned off, but goes into sleep mode. I want the car radio to be immediately ready for use the next time the engine is turned on, and not wait for a long boot. Thank you!
Click to expand...
Click to collapse
Have the same issue but i don't think that we can do something about that.